( femto.tal ) ( ) ( requires terminal to be in raw mode ) ( see femto launcher script for more details ) ( TODO: ) ( - get long line truncation/scrolling working ) ( - allow line numbers to be toggled off ) ( - open file command? ) ( - close file command? ) ( - search&replace ) |00 @System [ &vector $2 &wst $1 &rst $1 &pad $4 &r $2 &g $2 &b $2 &debug $1 &halt $1 ] |10 @Console [ &vector $2 &stdin $1 &pad1 $1 &proc-get $1 &host-get $1 &pad2 $1 &type $1 &stdout $1 &stderr $1 &proc-put $1 &pad3 $1 ¶m $2 &opts $1 &host-put $1 ] |a0 @File [ &vector $2 &success $2 &stat $2 &delete $1 &append $1 &name $2 &length $2 &read $2 &write $2 ] ( MAX file size is currently #ce80, i.e. 52864 bytes ) %dbg { #ff .System/debug DEO } %emit { .Console/stdout DEO } %sp { #2018 DEO } %nl { #0a18 DEO } %cr { #0d18 DEO } %crlf { cr nl } %ansi { #1b18 DEO #5b18 DEO } ( emit macros ) ( ) ( these save one byte and are easier to read. ) %emit-! { LIT2 "! 18 DEO } %emit-$ { LIT2 "$ 18 DEO } %emit-lpar { LIT2 28 18 DEO } %emit-rpar { LIT2 29 18 DEO } %emit-, { LIT2 ", 18 DEO } %emit-0 { LIT2 "0 18 DEO } %emit-1 { LIT2 "1 18 DEO } %emit-2 { LIT2 "2 18 DEO } %emit-3 { LIT2 "3 18 DEO } %emit-6 { LIT2 "6 18 DEO } %emit-7 { LIT2 "7 18 DEO } %emit-: { LIT2 ": 18 DEO } %emit-; { LIT2 "; 18 DEO } %emit-C { LIT2 "C 18 DEO } %emit-H { LIT2 "H 18 DEO } %emit-J { LIT2 "J 18 DEO } %emit-K { LIT2 "K 18 DEO } %emit-[ { LIT2 "[ 18 DEO } %emit-] { LIT2 "] 18 DEO } %emit-m { LIT2 "m 18 DEO } %emit-n { LIT2 "n 18 DEO } %emit-~ { LIT2 "~ 18 DEO } %lmargin { #0006 } ( zero page ) |0000 ( terminal size information ) ( ) ( for now these are constant but eventually we could detect terminal resizes ) @term [ &cols $2 ( relative x coordinate of cursor, from 0 ) &rows $2 ( relative y coordinate of cursor, from 1 ) ] ( configuration settings used when editing ) ( ) ( these can be changed at any time without breaking anything else ) @config [ &tab-width $2 ( how many spaces to display tab chars ) &tab-adjust $2 ( how many "extra" spaces; tab-width - 1 ) &insert-tabs $1 ( tab key inserts tabs when true ) &color $2 ( digits of highlight color in reverse order ) &red $2 ( digits of color for line/EOF markers in reverse order ) ] ( tracks information related to the buffer's view of data ) ( ) ( limit and line-count change when we modify the buffer. ) ( offset and line-offset change when we move the view port. ) @buffer [ &limit $2 ( last byte of actual data (not including \0) + 1 ) &line-count $2 ( total number of lines in file ) &offset $2 ( first byte of data visible in terminal ) &line-offset $2 ( first line of text visible in terminal ) ] ( relative cursor positions, e.g. 0 to cols-1 ) ( ) ( when these change we may need to move the view port as well ) @cursor [ &col $2 ( current column value 0-n (may exceed lenght of row) ) &row $2 ( current relative row value, 0-(height-1) ) ] ( tracks overall editor state between events ) @state [ &in-help $1 ( are we showing help? ) &in-undo $1 ( are we currently in undo? ) &key $1 ( last key read ) &saw-esc $1 ( did we just see ESC? ) &saw-xterm $1 ( did we just see an ESC [ xterm sequence? ) &saw-vt $1 ( did we just see an ESC [ $N vt sequence? ) &redraw $1 ( redrawing: bits determine which parts ) ( 0x01 cursor ) ( 0x02 statusbar ) ( 0x04 prompt ) ( 0x08 matches ) ( 0x10 body and everything else ) &message $1 ( did we just print a message? ) &modified $1 ( has the buffer been modified? ) &quitting $1 ( are we in the process of quitting? ) ] ( prompt uses .tmp/pos and .tmp/data to track user input ) @prompt [ &active $1 ( is prompt currently active? ) &vector $2 ( what code to run when user responds ) &string $2 ( string to print for the prompt ) ] ( temporary input buffer used for a variety of things ) @tmp [ &pos $2 ( temporary pointer to address when reading data ) &data $80 ( small scratch pad when reading data ) ] ( search uses .tmp/pos and .tmp/data to track query string ) @searching [ &active $1 ( are we displaying search results? ) &orig-row $2 ( row we began the search at ) &orig-col $2 ( col we began the search at ) ®ex $2 ( regex to be stored if any ) &start $2 ( absolute start pos of match ) &end $2 ( absolute limit pos of match ) ] ( startup ) |0100 ( init zero page ) #0050 .term/cols STZ2 #0018 .term/rows STZ2 #0004 .config/tab-width STZ2 #0003 .config/tab-adjust STZ2 #00 .config/insert-tabs STZ ( #3333 .config/color STZ2 ) ( #3133 .config/red STZ2 ) #3733 .config/color STZ2 #3733 .config/red STZ2 ( #3033 .config/color STZ2 ) ( #3033 .config/red STZ2 ) ;data .buffer/offset STZ2 init-terminal ( start reading the filename from argv ) ;filename .tmp/pos STZ2 ;read-filename .Console/vector DEO2 BRK ( run a given command with no input/output ) @run-cmd ( cmd* -> ) .Console/param DEO2 #01 .Console/opts DEO #01 .Console/host-put DEO JMP2r ( restore the terminal to "normal" settings ) @restore-terminal ( -> ) #05 .Console/host-put DEO JMP2r ( put the terminal in raw mode ) @init-terminal ( -> ) #04 .Console/host-put DEO JMP2r ( import uxn regex library ) ~regex.tal ( ERROR HANDLING ) ( using errorq will print the given message before causing ) ( the interpreter to halt. ) @errorq ( msg* -> ) emit-! sp print nl dbg BRK ( open the given file at editor start up ) ( ) ( this is called during startup by ;read-filename ) ( ) ( TODO: enable closing/opening files with editor already running ) @open-file ( filename* -> ) .File/name DEO2 #ce81 .File/length DEO2 ;data .File/read DEO2 .File/success DEI2 #0000 EQU2 .state/modified STZ .File/success DEI2 #ce81 LTH2 ?&ok crlf ;messages/input-error print ;filename print crlf !quit-now ( calculate buffer limit address using start + size ) &ok .File/success DEI2 ;data ADD2 .buffer/limit STZ2 JMP2r ( ask the terminal for its size ) ( ) ( called during editor initialization by ;read-filename ) ( ) ( TODO: consider supporting terminal resizing ) @setup-terminal-size ( -> ) #03e7 DUP2 term-move-cursor term-get-cursor-position ;tmp/data .tmp/pos STZ2 ;receive-terminal-size .Console/vector DEO2 JMP2r ( receive size information from the terminal ) ( ) ( called from Console/vector after ;setup-terminal-size ) @receive-terminal-size ( -> ) .Console/stdin DEI .state/key STZ .state/key LDZ .tmp/pos LDZ2 STA .tmp/pos LDZ2 INC2 .tmp/pos STZ2 .state/key LDZ LIT "R EQU ?parse-terminal-size BRK ( parse and store terminal size information ) ( ) ( called by ;receive-terminal-size after complete message received ) @parse-terminal-size ( -> ) #0000 ,&acc STR2 .tmp/data LDZk #1b NEQ ?&parse-error ( i ) INC LDZk LIT "[ NEQ ?&parse-error ( i ) INC &loop LDZk LIT "; EQU ?&parse-col LIT2r :&loop !&read &parse-col INC ,&acc LDR2 #0002 SUB2 .term/rows STZ2 #0000 ,&acc STR2 &loop2 LDZk LIT "R EQU ?&done LIT2r :&loop2 !&read &read LDZk LIT "0 SUB #00 SWP ,&acc LDR2 #000a MUL2 ADD2 ,&acc STR2 INC JMP2r &done ,&acc LDR2 .term/cols STZ2 POP ;on-key .Console/vector DEO2 draw-all BRK [ &acc $2 ] &parse-error POP .tmp/data LDZ2 ;messages/term-size-parse-error !errorq @count-c ( c^ -> n* ) #0000 ,&count STR2 STH ;data &loop LDAk #00 EQU ?&done LDAk STHkr NEQ ?&next ,&count LDR2 INC2 ,&count STR2 &next INC2 !&loop &done POP2 POPr ,&count LDR2 JMP2r [ &count $2 ] ( save count of number of lines in input file ) ( ) ( this method also detects whether \t characters are used, ) ( and uses this to initialize config/insert-tabs. ) @setup-linecount ( -> ) #0a count-c INC2 .buffer/line-count STZ2 #09 count-c #0000 GTH2 .config/insert-tabs STZ JMP2r ( reads filename from the program's argv ) ( ) ( currently femto must be given a file to edit, and reading this ) ( filename is the first thing that happens in ;startup. ) ( ) ( TODO: support other situations, such as: ) ( - launching femto without a file name ) ( - closing the given file and opening a new one ) @read-filename ( -> ) #12 DEI #0a EQU ?&execute ( did we read \n ? ) #12 DEI .tmp/pos LDZ2 STA ( no, so save in buffer ) .tmp/pos LDZ2 INC2 .tmp/pos STZ2 ( pos++ ) BRK ( return ) &execute ( we saw a newline, so do something ) #00 .tmp/pos LDZ2 STA ( null terminate str ) ;filename open-file ( open file ) setup-linecount ( determine # of lines ) setup-terminal-size ( detect terminal dimensions ) BRK ( jump to beginning of line ) @bol ( -> ) #0000 .cursor/col STZ2 redraw-statusbar-and-cursor !return ( jump to beginning of line ) @eol ( -> ) cur-len .cursor/col STZ2 redraw-statusbar-and-cursor !return @forward ( -> ) go-forward !return ( move forward by one character ) @go-forward ( -> ) cur-pos last-pos GTH2 ( ?return ) ?&noop redraw-statusbar-and-cursor cur-col cur-len LTH2 ?&normal #0000 .cursor/col STZ2 .cursor/row LDZ2 INC2 .cursor/row STZ2 !ensure-visible-cursor &normal cur-col INC2 .cursor/col STZ2 &noop JMP2r ( move backward by one character ) @back ( -> ) go-back !return ( internal implementation shared by ;back and ;backspace ) @go-back ( -> ) cur-pos ;data EQU2 ?&noop cur-col #0001 LTH2 ?&next-line cur-col #0001 SUB2 .cursor/col STZ2 !redraw-statusbar-and-cursor &next-line .cursor/row LDZ2k #0001 SUB2 ROT STZ2 cur-len .cursor/col STZ2 ensure-visible-cursor redraw-statusbar-and-cursor &noop JMP2r ( move up by one line ) @up ( -> ) .cursor/row LDZ2 #0000 EQU2 ?return .cursor/row LDZ2 #0001 SUB2 .cursor/row STZ2 ensure-visible-cursor redraw-statusbar-and-cursor !return ( move down by one line ) @down ( -> ) .cursor/row LDZ2 .buffer/line-count LDZ2 #0001 SUB2 EQU2 ?return .cursor/row LDZ2 INC2 .cursor/row STZ2 ensure-visible-cursor redraw-statusbar-and-cursor !return @is-word-char ( c^ -> bool^ ) DUP #2f GTH OVR #3a LTH AND STH DUP #40 GTH OVR #5b LTH AND STH ORAr DUP #60 GTH SWP #7b LTH AND STHr ORA JMP2r @not-word-char ( c^ -> bool^ ) is-word-char #00 EQU JMP2r @forward-by-word ( -> ) cur-pos &first LDAk #00 EQU ?&done LDAk is-word-char ?&second INC2 go-forward !&first &second LDAk #00 EQU ?&done LDAk not-word-char ?&done INC2 go-forward !&second &done POP2 !return @back-by-word ( -> ) cur-pos #0001 SUB2 &first DUP2 ;data LTH2 ?&done LDAk is-word-char ?&second #0001 SUB2 go-back !&first &second DUP2 ;data LTH2 ?&done LDAk not-word-char ?&done #0001 SUB2 go-back !&second &done POP2 !return @help #01 .state/in-help STZ term-erase-all #0000 #0000 term-move-cursor emit-color-bold ;help-text print emit-reset redraw-all BRK ( center buffer view on the current line ) @center-view .term/rows LDZ2 INC2 #0002 DIV2 STH2k .cursor/row LDZ2 LTH2 ?&standard POP2r #0000 .buffer/line-offset STZ2 ;data .buffer/offset STZ2 !&done &standard .cursor/row LDZ2 STH2r SUB2 DUP2 .buffer/line-offset STZ2 abs-line .buffer/offset STZ2 &done redraw-all !return ( move up by one page ) @page-up ( -> ) .term/rows LDZ2 #0002 SUB2 STH2k .buffer/line-offset LDZ2 LTH2 ?&move-full POP2r zero-row #0000 .cursor/col STZ2 !&done &move-full .cursor/row LDZ2 STH2kr SUB2 .cursor/row STZ2 .buffer/line-offset LDZ2 STH2r SUB2 DUP2 .buffer/line-offset STZ2 abs-line .buffer/offset STZ2 &done redraw-all !return ( move down by one page ) @page-down eof-is-visible ?&near-eof .term/rows LDZ2 #0002 SUB2 STH2k .buffer/line-offset LDZ2 ADD2 DUP2 .buffer/line-offset STZ2 abs-line .buffer/offset STZ2 .cursor/row LDZ2 STH2r ADD2 .cursor/row STZ2 redraw-all !return &near-eof .buffer/line-count LDZ2 #0001 SUB2 .cursor/row STZ2 cur-len .cursor/col STZ2 redraw-cursor !return ( return true if the end of the file is visible ) @eof-is-visible ( -> bool^ ) .buffer/line-offset LDZ2 .term/rows LDZ2 ADD2 INC2 .buffer/line-count LDZ2 GTH2 JMP2r ( beginning quitting femto, prompting if unsaved changes ) @quit #01 .state/quitting STZ .state/modified LDZ #00 EQU ?quit-now ;messages/quit-prompt ;messages/null ;do-quit start-prompt redraw-prompt-and-cursor !return ( display two strings on the message line ) ( ) ( often this involves a static messages + an argument like ;tmp/data. ) ( ) ( use messages/null for the second string if only one is needed. ) @send-message ( s1* s2* -> ) #01 .state/message STZ move-to-message-line SWP2 print !print ( callback executed in response to the quit prompt. ) @do-quit .tmp/data LDZ LIT "n EQU ?quit-now .tmp/data LDZ LIT "y EQU ?save #00 .state/quitting STZ ;messages/unknown-input ;tmp/data send-message BRK ( quit the editor and restore the terminal ) ( ) ( this definition is needed so the address can be used by JCN2. ) @quit-now restore-terminal #010f DEO BRK ( label that calls BRK ) ( ) ( this definition is needed so the address can be used by JCN2. ) @ignore BRK ( insert the given character at the cursor position ) ( ) ( this should not be called for newlines, see ;newline ) @insert ( c^ -> ) cur-pos shift-right cur-col INC2 .cursor/col STZ2 redraw-all !return ( insert the given character in the prompt ) @insert-prompt ( c^ -> ) .tmp/pos LDZ2 STH2k STA ( data[pos] <- c ) INC2r #00 STH2kr STA ( data[pos+1] <- 0 ) STH2r .tmp/pos STZ2 ( pos <- pos+1 ) redraw-prompt-and-cursor !return ( insert a tab at the cursor position ) ( ) ( depending on the state of config/insert-tabs this will ) ( either call ;insert with \t or else insert a number of ) ( spaces based on .config/tab-width. ) @insert-tab ( -> ) .config/insert-tabs LDZ ?&use-tabs #0000 .config/tab-width LDZ2 SUB2 &loop DUP2 #0000 EQU2 ?&done #20 cur-pos shift-right INC2 !&loop &done cur-col .config/tab-width LDZ2 ADD2 .cursor/col STZ2 redraw-all !return &use-tabs #09 !insert ( insert a newline at the cursor position ) @newline ( c^ -> ) #0a cur-pos shift-right #0000 .cursor/col STZ2 .cursor/row LDZ2 INC2 .cursor/row STZ2 .buffer/line-count LDZ2k INC2 ROT STZ2 ensure-visible-cursor redraw-all !return ( delete the character to the left of the cursor, if any ) @backspace ( -> ) cur-pos ;data EQU2 ?return go-back !delete ( delete the last character in the prompt ) @backspace-prompt ( -> ) .tmp/pos LDZ2 ;tmp/data EQU2 ?&skip ( ?return ) #00 .tmp/pos LDZ2 #0001 SUB2 ( 0 pos-1 ) STH2k STA ( data[pos-1] <- 0 ) STH2r .tmp/pos STZ2 ( pos <- pos-1 ) &skip redraw-prompt-and-cursor !return ( delete the character under the cursor, if any ) @delete ( -> ) last-pos cur-pos LTH2 ?return cur-pos LDAk STH ( cur [c] ) shift-left ( [c] ) STHr #0a NEQ ?¬-newline .buffer/line-count LDZ2k #0001 SUB2 ROT STZ2 ¬-newline redraw-all !return ( used at the start of an escape sequence to set up state. ) ( ) ( many keys such as page-down will actually send an escape character ) ( followed by others. to support these we use saw-esc to interpret ) ( input characters differently. ) ( ) ( see also state/saw-xterm which supports such sequences. ) @escape ( -> ) #01 .state/saw-esc STZ BRK ( move to the end of the file ) @goto-end ( -> ) .buffer/line-count LDZ2 #0001 SUB2 .cursor/row STZ2 .buffer/line-count LDZ2 .term/rows LDZ2 LTH2k ?&use-zero SUB2 #0002 ADD2 !&continue &use-zero POP2 POP2 #0000 &continue DUP2 .buffer/line-offset STZ2 abs-line .buffer/offset STZ2 cur-len .cursor/col STZ2 redraw-all !return ( move to the start of the file ) @goto-start ( -> ) zero-row #0000 .cursor/col STZ2 redraw-all !return ( prompt for a line number and move to that line ) @goto-line ( -> ) ;messages/goto-line ;messages/null ;do-goto-line start-prompt redraw-prompt-and-cursor !return ( parse the given string as a decimal number ) ( ) ( returns the number as a short followed by whether parsing was ok ) @parse-decimal-number ( addr* -> n* ok^ ) LDAk ?&non-empty #00 JMP2r &non-empty LIT2r 0000 &loop LDAk ?&continue POP2 STH2r #01 JMP2r &continue LDAk LIT "0 LTH ?&fail LDAk LIT "9 GTH ?&fail LIT2r 000a MUL2r LDAk LIT "0 SUB #00 SWP STH2 ADD2r INC2 !&loop &fail POP2r #00 JMP2r ( go to the given line number ) ( ) ( this is used as a callback from the goto-line prompt ) @do-goto-line ( n* -> ) ;tmp/data parse-decimal-number ?&ok ;messages/unknown-input ;tmp/data send-message !return &ok #0001 SUB2 ( convert 1-indexing to 0-indexing ) DUP2 .buffer/line-count LDZ2 LTH2 ?&within POP2 !goto-end &within jump-to-line redraw-all !return ( move the cursor to the given coordinates ) ( ) ( this won't move the display if the given coordinates are visible. ) @move-to-coord ( col* row* -> ) DUP2 line-is-visible ?jump-to-coord/short !jump-to-coord ( move the cursor to the given coordinates ) ( ) ( this will always ensure the display is centered on the given coordinates ) @jump-to-coord ( x* y* -> ) .term/rows LDZ2 INC2 #0002 DIV2 LTH2k ( x y rows/2 ylines-rows? ) ?&late ( x y y-rows/2 lines-rows ) POP2 !&finish &early ( x y rows/2 ) POP2 #0000 !&finish ( x y 0000 ) &late ( x y y-rows/2 lines-rows ) NIP2 &finish ( x y o ) redraw-all SUB2k STH2 DUP2 ( x y o o [y-o] ) .buffer/line-offset STZ2 ( x y o [y-o] ) abs-line .buffer/offset STZ2 ( x y [y-o] ) POP2r &short redraw-statusbar-and-cursor .cursor/row STZ2 ( x ) .cursor/col STZ2 JMP2r ( jump to the given line number ) @jump-to-line ( n* -> ) #0000 SWP2 !jump-to-coord ( ensure the cursor is visibe ) ( ) ( if the cursor is not already visible the screen will be ) ( centered on the cursor's coordinates. ) @ensure-visible-cursor .cursor/row LDZ2 .buffer/line-offset LDZ2 SUB2 .term/rows LDZ2 LTH2 ?&noop .cursor/row LDZ2 jump-to-line redraw-all &noop JMP2r ( currently used to print stack information. ) @debug ;messages/input-error !errorq ( move the terminal's cursor to the message line ) ( ) ( this low level method does not change any editor state (such as ) ( the cursor) but is used to display messages. ) @move-to-message-line ( -> ) #0000 .term/rows LDZ2 #0002 ADD2 !term-move-cursor ( start a prompt on the message line ) ( ) ( the arguments are as follows: ) ( - the prompt string will printed in bold ) ( - the default string will be editable ) ( - the vector address will be used on return ) ( ) ( prompts can always be cancelled using C-g. ) ( ) ( when called vector should end in a BRK instructinon. ) @start-prompt ( prompt* default* vector* -> ) .prompt/active LDZ ?&is-active #01 .prompt/active STZ ( prompt/active <- 1 ) .prompt/vector STZ2 ( prompt/vector <- vector ) ;tmp/data str-copy ( tmp/data <- default ) ;tmp/data ADD2 .tmp/pos STZ2 ( tmp/pos <- len(default)+data ) .prompt/string STZ2 ( prompt/string <- prompt ) JMP2r &is-active #0000 DIV ( ends prompt without calling vector ) @cancel-prompt ( -> ) #00 .prompt/active STZ #00 .state/quitting STZ clear-message-line redraw-prompt-and-cursor !return ( finishes prompt and executes callback ) ( ) ( when called vector should end in a BRK instruction ) @finish-prompt ( -> ) #00 .prompt/active STZ clear-message-line redraw-prompt-and-cursor .prompt/vector LDZ2 JMP2 ( begin saving the file, prompting the user for a fiel name ) @save ;messages/save-prompt ;filename ;do-save start-prompt redraw-prompt-and-cursor !return ( save the file with the filename found in tmp/data ) @do-save ( -> ) .buffer/limit LDZ2 ;data SUB2 STH2 ( [size] ) ;tmp/data .File/name DEO2 STH2kr .File/length DEO2 ;data .File/write DEO2 .File/success DEI2 STH2r EQU2 ?&ok ;messages/save-failed !&finish &ok #00 .state/modified STZ ;tmp/data ;filename str-copy POP2 ;messages/save-ok &finish ;tmp/data send-message .state/quitting LDZ ?quit-now #03 .state/redraw STZ ( FIXME: why do we have to do this? ) !return ( begin a search, prompting for a search string ) @search ( -> ) ;messages/search-prompt ;messages/null ;do-search start-prompt redraw-prompt-and-cursor !return ( execute a search, using the given search string ) @do-search ( -> ) .cursor/row LDZ2 .searching/orig-row STZ2 .cursor/col LDZ2 .searching/orig-col STZ2 #0000 .searching/regex STZ2 move-to-next-match ?&found move-to-prev-match ?&found ;messages/no-matches-found ;tmp/data send-message BRK &found #01 .searching/active STZ redraw-matches !return ( begin a search, prompting for a regular expression ) @regex-search ( -> ) ;messages/regex-search-prompt ;messages/null ;do-regex-search start-prompt redraw-prompt-and-cursor !return ( execute a search, using the given regular expressions ) ( ) ( TODO: handle invalid regular expressions that fail to compile ) @do-regex-search ( -> ) cur-pos DUP2 .searching/start STZ2 .searching/end STZ2 .cursor/row LDZ2 .searching/orig-row STZ2 .cursor/col LDZ2 .searching/orig-col STZ2 ;tmp/data compile .searching/regex STZ2 move-to-next-regex-match ?&found move-to-prev-regex-match ?&found ;messages/no-matches-found ;tmp/data send-message BRK &found #01 .searching/active STZ redraw-matches !return ( toggle the color used by the terminal ) ( ) ( available colors are: ) ( - black ) ( - red ) ( - green ) ( - yellow ) ( - blue ) ( - magenta ) ( - cyan ) ( - white ) @toggle-color ( -> ) .config/color LDZ2 #3733 EQU2 ?{ .config/color LDZ2 #0100 ADD2 DUP2 .config/color STZ2 DUP2 #3733 LTH2 ?{ .config/red STZ2 !&done } POP2 #3133 .config/red STZ2 !&done } #3033 DUP2 .config/color STZ2 .config/red STZ2 &done redraw-all !return ( toggle whether to use literal tab characters ) ( ) ( when opening a file, this defaults to 01 if existing tab ) ( characters are found, and 00 otherwise. ) @toggle-tabs ( -> ) .config/insert-tabs LDZk #00 EQU SWP STZ redraw-statusbar-and-cursor !return ( interpret user input as an escaped sequence ) ( ) ( called by on-key with state/saw-esc is true ) ( ) ( TODO: maybe M-% for search&replace ) @on-key-escaped ( -> ) #00 .state/saw-esc STZ .state/key LDZ LIT "< EQU ( M-< ) ?goto-start .state/key LDZ LIT "> EQU ( M-> ) ?goto-end .state/key LDZ LIT "b EQU ( M-b ) ?back-by-word .state/key LDZ LIT "c EQU ( M-c ) ?toggle-color .state/key LDZ LIT "f EQU ( M-f ) ?forward-by-word .state/key LDZ LIT "g EQU ( M-g ) ?goto-line .state/key LDZ LIT "h EQU ( M-h ) ?help .state/key LDZ LIT "s EQU ( M-s ) ?regex-search .state/key LDZ LIT "t EQU ( M-t ) ?toggle-tabs .state/key LDZ LIT "u EQU ( M-u ) ?undo .state/key LDZ LIT "v EQU ( M-v ) ?page-up .state/key LDZ LIT "[ EQU ( M-[ ) ?xterm BRK ( set our input to expect xterm control sequences ) ( ) ( after seeing ESC followed by [ we expect various ) ( ANSI or xterm control sequences. these include ) ( things like: ) ( - up/down/left/right arrow keys ) ( - page up/page down keys ) ( - end/home keys ) @xterm #01 .state/saw-xterm STZ BRK ( after seeing sequences like "ESC [ 1" we expect ) ( to see a trailing ~ to complete the sequence. ) ( ) ( this callback checks for and if set performs ) ( the relevant action. ) @on-key-vt ( -> ) .state/saw-vt LDZk STH #00 SWP STZ .state/key LDZ LIT "~ EQU ?&ok POPr BRK &ok STHr DUP LIT "1 NEQ ?¬-1 ( ^[[1~ -> home ) POP !bol ¬-1 DUP LIT "2 NEQ ?¬-2 ( ^[[2~ -> insert ) POP BRK ¬-2 DUP LIT "3 NEQ ?¬-3 ( ^[[3~ -> delete ) POP !delete ¬-3 DUP LIT "4 NEQ ?¬-4 ( ^[[4~ -> end ) POP !eol ¬-4 DUP LIT "5 NEQ ?¬-5 ( ^[[5~ -> page up ) POP !page-up ¬-5 DUP LIT "6 NEQ ?¬-6 ( ^[[6~ -> page down ) POP !page-down ¬-6 DUP LIT "7 NEQ ?¬-7 ( ^[[7~ -> home ) POP !bol ¬-7 DUP LIT "8 NEQ ?¬-8 ( ^[[8~ -> end ) POP !eol ¬-8 ( ??? ) POP BRK ( after seeing sequences like "ESC [" we expect ) ( to see more characters to determine the logical key. ) ( ) ( this callback performs the relevant action, ) ( or else sets (or unsets) state as necessary ) ( to continue (or end) the sequence. ) @on-key-xterm ( -> ) #00 .state/saw-xterm STZ .state/key LDZ LIT "A EQU ( ^[[A -> up ) ?up .state/key LDZ LIT "B EQU ( ^[[B -> down ) ?down .state/key LDZ LIT "C EQU ( ^[[C -> right ) ?forward .state/key LDZ LIT "D EQU ( ^[[D -> left ) ?back .state/key LDZ LIT "F EQU ( ^[[F -> end ) ?eol .state/key LDZ LIT "H EQU ( ^[[H -> home ) ?bol .state/key LDZ LIT "0 LTH ?ignore .state/key LDZ LIT "8 GTH ?ignore .state/key LDZ .state/saw-vt STZ ( ^[[1 through ^[[8 ) BRK ( clear the message line ) ( ) ( this includes the code needed to move the cursor ) ( to that line, the ANSI control sequence to clear ) ( the line, and unsetting state/message. ) ( ) ( if state/message is unset this is a no-op. ) @clear-message-line .state/message LDZ #00 EQU ?&done move-to-message-line term-erase-line #00 .state/message STZ &done JMP2r ( cancel the active search ) ( ) ( this method unsets searching/active and also restores ) ( the original cursor position. ) @cancel-search .searching/orig-row LDZ2 jump-to-line .searching/orig-col LDZ2 .cursor/col STZ2 !finish-search ( cancel the active search ) ( ) ( this method unsets searching/active. unlike ;cancel-search ) ( this leaves the cursor where it is. ) @finish-search #00 .searching/active STZ reset-arena redraw-all !return ( TODO: i haven't decided how to solve the problem of ) ( overlapping matches yet. i don't really want to maintain ) ( a global list of all matches, which means that currently ) ( it can change in response to e.g. cursor position when ) ( matches overlap. ) ( ) ( UPDATE: now that we have searching/start and searching/end ) ( we can use those to resume the search after the full match. ) ( this solves the problem except in some very strange cases ) ( which are quite unlikely. ) ( jump forward to the next match, if any. ) ( ) ( moves the cursor forward to the next match. if there are no ) ( further matches the cursor does not move. ) @jump-to-next-match ( -> ) .searching/regex LDZ2 ORA ?&is-regex move-to-next-match POP !return &is-regex move-to-next-regex-match POP !return ( jump backward to the previous match, if any. ) ( ) ( moves the cursor backward to the previous match. if there are ) ( no further matches the cursor does not move. ) @jump-to-prev-match ( -> ) .searching/regex LDZ2 ORA ?&is-regex move-to-prev-match POP !return &is-regex move-to-prev-regex-match POP !return ( move to the next substring match. ) ( ) ( called by ;jump-to-next-match. ) @move-to-next-match ( -> ok^ ) .buffer/limit LDZ2 cur-pos INC2 &loop GTH2k #00 EQU ?&fail DUP2 matches-at ORA ?&found INC2 !&loop &found NIP2 jump-to-pos #01 JMP2r &fail POP2 POP2 #00 JMP2r ( move to the previous substring match. ) ( ) ( called by ;jump-to-prev-match. ) @move-to-prev-match ( -> ok^ ) ;data cur-pos #0001 SUB2 &loop GTH2k ?&fail DUP2 matches-at ORA ?&found #0001 SUB2 !&loop &found NIP2 jump-to-pos #01 JMP2r &fail POP2 POP2 #00 JMP2r ( move to the next regex match. ) ( ) ( called by ;jump-to-next-match. ) @move-to-next-regex-match ( -> ok^ ) .searching/end LDZ2 .buffer/limit LDZ2 OVR2 GTH2 ?&ok POP2 #00 JMP2r &ok .searching/regex LDZ2 rx-search ?&found #00 JMP2r &found ;search-end LDA2 .searching/end STZ2 ;search-start LDA2 DUP2 .searching/start STZ2 jump-to-pos #01 JMP2r ( move to the previous substring match. ) ( ) ( called by ;jump-to-prev-match. ) ( ) ( compared to move-to-next-regex-match this is kind of inefficient. ) ( that's because we have no easy way to search backwards from a point. ) ( ) ( we could do some kind of fancy thing where we search the previous ) ( N bytes, then the 2N bytes before that, etc. ) ( ) ( however, 64K is small enough that just searching from the beginning ) ( and then taking the last match before the cursor works. ) @move-to-prev-regex-match ( -> ok^ ) LITr 00 cur-pos ;data ( limit pos [res] ) &loop ( limit pos [res] ) GTH2k #00 EQU ?&done ( limit pos ) DUP2 .searching/regex LDZ2 rx-search ( limit pos match? ) #00 EQU ?&done ( limit pos ) OVR2 ;search-end LDA2 LTH2 ?&done POP2 POPr LITr 01 ;search-start LDA2 .searching/start STZ2 ;search-end LDA2 DUP2 .searching/end STZ2 !&loop &done POP2 POP2 STHr DUP #00 EQU ?&fail .searching/start LDZ2 jump-to-pos &fail JMP2r ( on-key event handler to use when searching ) ( ) ( when searching the user can: ) ( - move to the next match (n or C-s) ) ( - move to the previous match (p or C-r) ) ( - end the search leaving the cursor where it is (enter) ) ( - cancel the search restoring the cursor (C-g) ) @on-key-searching .state/key LDZ #07 EQU ( C-g ) ?cancel-search .state/key LDZ #08 EQU ( C-h ) ?help .state/key LDZ #0d EQU ( \r ) ?finish-search .state/key LDZ #12 EQU ( C-r ) ?jump-to-prev-match .state/key LDZ #13 EQU ( C-s ) ?jump-to-next-match .state/key LDZ #6e EQU ( n ) ?jump-to-next-match .state/key LDZ #70 EQU ( p ) ?jump-to-prev-match !ignore ( on-key event handler to use when prompt is active ) ( ) ( when the prompt is active the user can: ) ( - append characters to the input string ) ( - delete from the end of the input string (backspace) ) ( - complete the input and act (enter) ) ( - cancel the prompt without action (C-g) ) ( ) ( TODO: currently it's impossible to edit the prompt ) ( except from the end. ideally we'd support most of the ) ( same navigation commands as we do in the buffer, such as ) ( C-a, C-d, etc. however, it's enough extra work to enable ) ( this that for now i haven't done it. ) @on-key-prompt .state/key LDZ #07 EQU ( C-g ) ?cancel-prompt .state/key LDZ #08 EQU ( C-h ) ?help .state/key LDZ #0d EQU ( \r ) ?finish-prompt .state/key LDZ #7f EQU ( DEL ) ?backspace-prompt .state/key LDZ #20 LTH ?ignore ( ignore for now ) .state/key LDZ #7e GTH ?ignore ( ignore for now ) .state/key LDZ ( printable ASCII ) !insert-prompt BRK ( on-key event handler ) ( ) ( this is the "normal" event handler to use for editing ) ( the buffer. it checks various state values to determine ) ( if we're in the midst of a control sequence, if we're ) ( searching or have an active prompt, etc. ) ( ) ( TODO: C-h for help ) ( ) ( you could also imagine building data structures of ) ( commands to unify input strings, help text, callbacks, ) ( and so on. this might ultimately be more efficient but ) ( for now what we have works. ) @on-key #00 .state/in-undo STZ .Console/stdin DEI .state/key STZ clear-message-line .state/in-help LDZ #00 .state/in-help STZ ?return .searching/active LDZ ?on-key-searching .prompt/active LDZ ?on-key-prompt .state/saw-vt LDZ ?on-key-vt .state/saw-xterm LDZ ?on-key-xterm .state/saw-esc LDZ ?on-key-escaped .state/key LDZ #01 EQU ( C-a ) ?bol .state/key LDZ #02 EQU ( C-b ) ?back .state/key LDZ #04 EQU ( C-d ) ?delete .state/key LDZ #05 EQU ( C-e ) ?eol .state/key LDZ #06 EQU ( C-f ) ?forward .state/key LDZ #08 EQU ( C-h ) ?help .state/key LDZ #09 EQU ( \t ) ?insert-tab .state/key LDZ #0c EQU ( C-l ) ?center-view .state/key LDZ #0d EQU ( \r ) ?newline .state/key LDZ #0e EQU ( C-n ) ?down .state/key LDZ #0f EQU ( C-o ) ?save .state/key LDZ #10 EQU ( C-p ) ?up .state/key LDZ #13 EQU ( C-s ) ?search .state/key LDZ #16 EQU ( C-v ) ?page-down .state/key LDZ #18 EQU ( C-x ) ?quit .state/key LDZ #1a EQU ( C-z ) ?debug .state/key LDZ #1b EQU ( ESC ) ?escape .state/key LDZ #7f EQU ( DEL ) ?backspace .state/key LDZ #20 LTH ?ignore ( ignore for now ) .state/key LDZ #7e GTH ?ignore ( ignore for now ) .state/key LDZ ( printable ASCII ) !insert ( return the smaller of two short values ) @min2 ( x* y* -> min* ) LTH2k JMP SWP2 POP2 JMP2r ( method to add bits to the redraw register ) ( ) ( state/redraw uses 8 bits to represent which parts ) ( of the screen (if any) should be redrawn. this method ) ( uses logical-or (ORA) to add the bits of n to those ) ( already set. ) @redraw-add ( n^ -> ) .state/redraw LDZk ROT ORA SWP STZ JMP2r ( various redrawing methods ) ( ) ( these don't perform a redraw right away, but instead ) ( signal that the next drawing should include that part. ) @redraw-cursor ( -> ) #01 !redraw-add @redraw-statusbar-and-cursor ( -> ) #03 !redraw-add @redraw-prompt-and-cursor ( -> ) #05 !redraw-add @redraw-matches ( -> ) #08 !redraw-add @redraw-all ( -> ) #1f !redraw-add ( draw the current cursor location ) @draw-cursor ( -> ) .prompt/active LDZ #00 EQU JMP JMP2r ( TODO: handle long lines ) cur-w-col lmargin ADD2 .cursor/row LDZ2 .buffer/line-offset LDZ2 SUB2 !term-move-cursor ( current column in terms of display width ) ( ) ( this is different than ;cur-col due to tabs ) @cur-w-col ( -> col* ) LIT2r 0000 ( [0] ) cur-line DUP2 cur-col ADD2 SWP2 ( lim s [0] ) &loop GTH2k ?&next POP2 POP2 STH2r JMP2r &next LDAk #09 EQU ?&tabs INC2 INC2r !&loop &tabs INC2 .config/tab-width LDZ2 STH2 ADD2r !&loop ( move the terminal cursor to the statusbar line ) @move-to-statusbar ( -> ) #0000 .term/rows LDZ2 !term-move-cursor ( draw the full statusbar ) @draw-statusbar ( -> ) move-to-statusbar emit-color-reverse LIT2r 2018 .term/cols LDZ2 #0001 ( cols i [2018] ) &loop LTH2k ?&done DEOkr INC2 !&loop &done POP2 POP2 POP2r ( ) move-to-statusbar ( display ** if the buffer has unsaved changes, -- otherwise ) #2d .state/modified LDZ #00 NEQ #03 MUL SUB DUP emit emit sp ;filename print sp emit-[ .buffer/limit LDZ2 ;data SUB2 emit-dec2 ;messages/bytes print sp .buffer/line-count LDZ2 emit-dec2 ;messages/lines print sp emit-lpar cur-col INC2 emit-dec2 emit-, .cursor/row LDZ2 INC2 emit-dec2 emit-rpar sp emit-[ LIT "s .config/insert-tabs LDZ ADD emit emit-] sp ;messages/help-msg print !emit-reset @draw-prompt ( -> ) clear-message-line .prompt/active LDZ ?&is-active JMP2r &is-active #01 .state/message STZ move-to-message-line emit-color-bold .prompt/string LDZ2 print emit-reset ;tmp/data print JMP2r @draw-linenum ( n* -> ) emit-reset emit-color emit-dec2-pad sp !emit-reset @matches-at ( s* -> limit* ) LIT2r :tmp/data &loop LDAkr STHr #00 EQU ?&done LDAk LDAkr STHr NEQ ?&fail INC2 INC2r !&loop &fail POP2 #0000 &done POP2r JMP2r ( TODO: this doesn't handle tabs correctly ) @draw-region ( offset* limit* col* row* -> ) OVR2 ( offset limit col row col ) .term/cols LDZ2 SWP2 SUB2 STH2 ( offset limit col row [cols-col] ) term-move-cursor ( offset limit [cols-col] ) OVR2 STH2r ADD2 ( offset limit offset+cols-col ) min2 STH2 ( offset [cutoff] ) &loop ( i [cutoff] ) DUP2 STH2kr LTH2 #00 EQU ?&done LDAk #00 EQU ?&done LDAk #18 DEO INC2 !&loop &done POP2 POP2r JMP2r @screen-limit ( -> sc-limit* ) .term/rows LDZ2 .buffer/line-offset LDZ2 ADD2 ( row0+rows ) DUP2 .buffer/line-count LDZ2 LTH2 ?¬-end POP2 .buffer/limit LDZ2 JMP2r ¬-end !abs-line @draw-regex-matches ( -> ) emit-color-reverse-bold ( ) screen-limit .buffer/offset LDZ2 ( limit pos ) &loop ( limit pos ) GTH2k #00 EQU ( limit pos limit>pos=0? ) ?&done ( limit pos ) DUP2 .searching/regex LDZ2 ( limit pos pos rx ) rx-search #00 EQU ( limit pos found=0? ) ?&done ( limit pos ) POP2 ;search-start LDA2 ( limit start ) GTH2k #00 EQU ( limit start limit>start=0? ) ?&done ( limit start ) ;search-end LDA2 OVR2 ( limit start end start ) pos-to-row-col ( limit start end row col ) lmargin ADD2 ( limit start end row col+lm ) SWP2 .buffer/line-offset LDZ2 SUB2 ( limit start end col+lm row-lo ) draw-region ( limit ) ;search-end LDA2 ( limit end ) !&loop &done ( limit pos ) POP2 POP2 JMP2r @draw-matches ( -> ) ( return if not searching ) .searching/active LDZ #00 EQU ?&return ( ) .searching/regex LDZ2 ORA ?draw-regex-matches emit-color-reverse-bold lmargin ,&x STR2 #0000 ,&y STR2 ( x <- 0, y <- 0 ) .buffer/offset LDZ2 DUP2 screen-limit SUB2 STH2 ( offset [-count] ) &loop ( offset [-count] ) STH2kr #0000 EQU2 ?&done DUP2 matches-at ( offset mlim [-count] ) DUP2 ORA ?&found POP2 ( offset [-count] ) LDAk #0a EQU ?&newline draw-matches/count-tabs #0001 !&next ( offset n [-count] ) &found ( offset mlim [-count] ) STH2k ( offset mlim [mlim -count] ) OVR2 SWP2 ,&x LDR2 ,&y LDR2 ( offset offset mlim x y [mlim -count] ) draw-region ( offset [mlim -count] ) STH2r ( offset mlim [-count] ) OVR2 SUB2 ( offset mlim-offset [-count] ) &next ( offset n [-count] ) DUP2 ,&x LDR2 ADD2 ,&x STR2 ( offset n [-count ) STH2k ( offset n [n -count] ) ADD2 ADD2r ( offset+n [n-count] ) !&loop &newline ( offset [-count] ) lmargin ,&x STR2 ,&y LDR2 INC2 ,&y STR2 INC2 INC2r !&loop &done POP2 POP2r emit-reset &return JMP2r [ &x $2 &y $2 ] &count-tabs ( offset -> offset ) LDAk #09 NEQ ?&count-tabs/done ,&x LDR2 .config/tab-adjust LDZ2 ADD2 ,&x STR2 &count-tabs/done JMP2r @emit-tab ( -> ) #0000 .config/tab-width LDZ2 SUB2 LIT2r 2018 &loop ORAk ?&next POP2 POP2r JMP2r &next DEOkr INC2 !&loop ( ANSI terminal notes ) ( ) ( attrs [0-7] ) ( reset, bright, dim, underscore, ) ( blink, ???, reverse, hidden ) ( ) ( fg [30-37], bg [40-47] ) ( black, red, green, yellow, ) ( blue, magenta, cyan, white ) ( ANSI control sequence to move the cursor to the given coord ) ( ESC [ $row ; $col H ) @term-move-cursor ( col* row* -> ) ansi INC2 ( row+1 ) emit-dec2 emit-; INC2 ( col+1 ) emit-dec2 emit-H JMP2r ( ANSI control sequence to move N positions right ) ( ESC [ $n C ) @term-move-right ( n* -> ) ansi emit-dec2 emit-C JMP2r ( ANSI control sequence to get the cursor position ) ( ESC [ 6 n ) @term-get-cursor-position ( -> ) LIT2 00 "n LIT "6 !ansi-emit ( ANSI control sequence to erase entire screen ) ( ESC [ 2 J ) @term-erase-all ( -> ) LIT2 00 "J LIT "2 !ansi-emit ( ANSI control sequence to erase the current line ) ( ESC [ 2 K ) @term-erase-line ( -> ) LIT2 00 "K LIT "2 !ansi-emit @ansi-emit ( 00 cn ... c1 c0 -> ) LITr 18 ( Console/stdout ) #5b1b STHkr DEO STHkr DEO ( ESC [ ) &loop DUP ?&next POP POPr JMP2r &next STHkr DEO !&loop ( ESC [ 3 1 m ) @emit-red ( -> ) LIT2 00 "m .config/red LDZ2 !ansi-emit ( ESC [ 0 m ) @emit-reset ( -> ) #00 LIT2 "m "0 !ansi-emit ( ESC [ 1 m $ ESC [ 0 m ) @emit-red-dollar ( -> ) emit-red emit-$ !emit-reset ( ESC [ 3 $x ; 7 m ) ( $x is 0-7 ) @emit-color-reverse ( -> ) LIT2 00 "m LIT2 "7 "; .config/color LDZ2 !ansi-emit @emit-color ( -> ) LIT2 00 "m .config/color LDZ2 !ansi-emit ( ESC [ 3 $x ; 1 m ) ( $x is 0-7 ) @emit-color-bold ( -> ) LIT2 00 "m LIT2 "1 "; .config/color LDZ2 !ansi-emit ( ESC [ 3 $x ; 1 ; 7 m ) ( $x is 0-7 ) @emit-color-reverse-bold ( -> ) LIT2 00 "m LIT2 "7 "; LIT2 "1 "; .config/color LDZ2 !ansi-emit @draw-all ( -> ) term-erase-all #0000 #0000 term-move-cursor .buffer/line-offset LDZ2 STH2 LIT2r 0001 ( [k line-offset] ) .buffer/offset LDZ2 &bol ADD2kr STH2r draw-linenum lmargin INC2 ,&x STR2 &loop ( offset [k line-offset] ) LDAk #00 EQU ?&eof LDAk #0a EQU ?&eol ,&x LDR2 .term/cols LDZ2 LTH2k ?&ok GTH2 ?&skip emit-red-dollar ,&x LDR2 INC2 ,&x STR2 &skip INC2 !&loop &ok POP2 POP2 LDAk #09 EQU ?&do-tab LDAk emit INC2 ,&x LDR2 INC2 ,&x STR2 !&loop &eol INC2r STH2kr .term/rows LDZ2 GTH2 ?&done crlf INC2 !&bol &do-tab emit-tab INC2 .config/tab-width LDZ2 ,&x LDR2 ADD2 ,&x STR2 !&loop [ &x $2 ] &eof emit-red &eof-loop STH2kr .term/rows LDZ2 GTH2 ?&done crlf lmargin term-move-right emit-~ INC2r !&eof-loop &done POP2 POP2r POP2r emit-reset draw-matches draw-statusbar draw-prompt !draw-cursor ( handler completion code to do necessary drawing and BRK ) @return ( -> ) .state/redraw LDZ DUP #10 AND ?&draw-all DUP #08 AND ?&do-8 !&skip-8 &do-8 draw-matches &skip-8 DUP #04 AND ?&do-4 !&skip-4 &do-4 draw-prompt &skip-4 DUP #02 AND ?&do-2 !&skip-2 &do-2 draw-statusbar &skip-2 DUP #01 AND ?&do-1 !&finish &do-1 draw-cursor !&finish &draw-all draw-all &finish POP #00 .state/redraw STZ BRK @str-copy ( src* dst* -> len* ) STH2 DUP2 ( src src [dst] ) &loop LDAk #00 EQU ?&done LDAk STH2kr STA INC2 INC2r !&loop &done ( src src+n [dst+n] ) SWP2 SUB2 #00 STH2r STA JMP2r @print ( s* -> ) &loop LDAk #00 EQU ?&eof LDAk #18 DEO INC2 !&loop &eof POP2 JMP2r @cur-len ( -> n* ) cur-line !line-len @line-len ( s* -> n* ) #0000 STH2 &loop LDAk #00 EQU ?&end LDAk #0a EQU ?&end INC2 INC2r !&loop &end POP2 STH2r JMP2r @line-is-visible ( n* -> bool^ ) .buffer/line-offset LDZ2 LTH2k ?&no .term/rows LDZ2 ADD2 LTH2 JMP2r &no POP2 POP2 #00 JMP2r @jump-to-pos ( s* -> ) pos-to-logical-row-col SWP2 !move-to-coord @pos-to-display-row-col ( s* -> row* col* ) .config/tab-width LDZ2 ;pos-to-row-col/tab-width STA2 !pos-to-row-col @pos-to-logical-row-col ( s* -> row* col* ) #0001 ;pos-to-row-col/tab-width STA2 ( fall-through ) @pos-to-row-col ( s* -> row* col* ) #0000 ,&row STR2 #0000 ,&col STR2 ;data &loop ( s pos ) GTH2k #00 EQU ?&done LDAk #0a EQU ?&newline LDAk #09 EQU ?&tab #0001 &inc ,&col LDR2 ADD2 ,&col STR2 INC2 !&loop &newline #0000 ,&col STR2 ,&row LDR2 INC2 ,&row STR2 INC2 !&loop &tab LIT2 [ &tab-width $2 ] !&inc &done POP2 POP2 ,&row LDR2 ,&col LDR2 JMP2r [ &row $2 &col $2 ] ( counts y lines forward from the given address ) @line-to-pos ( addr* y* -> s* ) #0000 SWP2 SUB2 STH2 ( addr [-y] ) &newline ( addr [-y] ) STH2kr ORA ?&loop !&done &loop ( addr [-y] ) LDAk #00 EQU ?¬-found ( addr [-y] ) LDAk #0a EQU ?&found ( addr [-y] ) INC2 !&loop ( addr+1 [-y] ) &found INC2 INC2r !&newline &done POP2r JMP2r ¬-found POP2 POP2r #0000 JMP2r ( find string pointer for absolute y coordinate ) @abs-line ( y* -> s* ) ;data SWP2 !line-to-pos ( return a pointer to the current line ) @cur-line ( -> s* ) .cursor/row LDZ2 .buffer/line-offset LDZ2 LTH2k ?&early ( if cursor/row is later than line-offset ) ( we can save some time by starting at ) ( buffer/offset instead of the beginning ) SUB2 .buffer/offset LDZ2 SWP2 !line-to-pos &early ( if cursor/row is earlier than line-offset ) ( we need to use the absolute y coordinate ) POP2 !abs-line ( return a pointer to the current cursor position ) @cur-pos ( -> s* ) cur-line cur-col ADD2 JMP2r ( insert one character at the cursor position ) @shift-right ( c^ addr* -> ) #01 .state/modified STZ ROT STH ( addr [prev^] ) last-pos SWP2 ( last addr [prev^] ) .state/in-undo LDZ ?&loop STH2k #00 STH2r u-push &loop LTH2k ?&done ( last addr [prev^] ) LDAk STH SWPr ( last addr [prev^ curr^] ) DUP2 STHr ( last addr addr prev^ [curr^] ) ROT ROT STA ( last addr [curr^] ) INC2 !&loop ( last addr+1 [curr^] ) &done NIP2 DUP2 ( addr addr [prev^] ) STHr ROT ROT ( addr prev^ addr ) STA INC2 ( addr+1 ) .buffer/limit STZ2 ( ) JMP2r ( remove one character at the cursor position ) ( ) ( TODO: change last/addr order and GTH -> LTH to remove hack ) @shift-left ( addr* -> ) #01 .state/modified STZ last-pos SWP2 ( last addr ) .state/in-undo LDZ ?&loop STH2k cur-pos LDA STH2r u-push &loop GTH2k ?&next ( last addr ) !&done ( last addr ) &next DUP2 INC2 LDAk ( last addr addr+1 c1^ ) STH SWP2 STHr ( last addr+1 addr c1^ ) ROT ROT ( last addr+1 c1^ addr ) STA !&loop ( last addr+1 ) &done POP2 ( last ) .buffer/limit STZ2 ( ) #00 .buffer/limit LDZ2 STA ( ensure null termination ) JMP2r ( current column in terms of bytes in buffer ) @cur-col ( -> col* ) .cursor/col LDZ2 cur-len !min2 ( jump to the first line in the buffer ) @zero-row ( -> ) ;data .buffer/offset STZ2 #0000 .buffer/line-offset STZ2 #0000 .cursor/row STZ2 JMP2r ( return the location of the last character in the buffer ) @last-pos ( -> addr* ) .buffer/limit LDZ2 #0001 SUB2 JMP2r ( emit a short as a decimal ) @emit-dec2 ( n* -> ) LITr 00 ( n [0] ) &read ( n [k] ) #000a DIV2k STH2k MUL2 SUB2 STH2r INCr ( n%10 n/10 [k+1] ) DUP2 ORA ?&read POP2 ( top element was 0000 ) &write ( n0 n1 ... nk [k+1] ) NIP #30 ADD #18 DEO LITr 01 SUBr ( n0 ... n{k-1} [k] ) STHkr ?&write POPr JMP2r ( emit a short as a decimal with leading spaces ) @emit-dec2-pad ( n* -> ) LITr 00 ( n [0] ) &read ( n [k] ) #000a DIV2k STH2k MUL2 SUB2 STH2r INCr ( n%10 n/10 [k+1] ) STHkr #05 LTH ?&read POP2 ( top element was 0000 ) &write0 ( n0 n1 ... nk [k+1] ) DUP2 ORA ?emit-dec2/write POP2 sp LITr 01 SUBr STHkr ?&write0 POPr JMP2r ( various string constants used as messages for the user ) @messages [ &null 00 &input-error "Input 20 "error, 20 "file 20 "too 20 "large: 20 00 &bytes 20 "bytes, 00 &save-ok "Successfully 20 "saved 20 00 &save-failed "Failed 20 "to 20 "save 20 00 &lines 20 "lines] 00 &goto-line "Go 20 "to 20 "line: 20 00 &save-prompt "File 20 "Name 20 "to 20 "Write: 20 00 &search-prompt "Text 20 "to 20 "Search 20 "for: 20 00 ®ex-search-prompt "Regex 20 "to 20 "Search 20 "for: 20 00 &quit-prompt "Save 20 "modified 20 "file 20 "(y/n)? 20 00 &unknown-input "Unknown 20 "input: 20 00 &no-matches-found "No 20 "matches 20 "found: 20 00 &term-size-parse-error "Error 20 "parsing 20 "term 20 "size 00 &help-msg "(help: 20 "C-h) 00 ] @help-text 09 "femto 20 "input 20 "reference 09 "(C 20 "is 20 "Ctrl, 20 "M 20 "is 20 "Meta/Alt ") 0d 0a 0d 0a 09 "quit 09 09 "C-x 09 09 "cancel 09 09 "C-g 0d 0a 09 "save 09 09 "C-o 09 09 "undo 09 09 "M-u 0d 0a 0d 0a 09 "move 20 "up 09 09 "C-p 20 "(up) 09 "page 20 "up 09 09 "M-v 20 "(pg-up) 0d 0a 09 "move 20 "down 09 "C-n 20 "(down) 09 "page 20 "down 09 "C-v 20 "(pg-dn) 0d 0a 09 "move 20 "left 09 "C-b 20 "(left) 09 "line 20 "start 09 "C-a 20 "(home) 0d 0a 09 "move 20 "right 09 "C-f 20 "(right) 09 "line 20 "end 09 "C-e 20 "(end) 0d 0a 0d 0a 09 "goto 20 "file 20 "start 09 "M-< 09 09 "left 20 "by 20 "word 09 "M-b 0d 0a 09 "goto 20 "file 20 "end 09 "M-> 09 09 "right 20 "by 20 "word 09 "M-f 0d 0a 09 "goto 20 "line 09 "M-g 09 09 "center 20 "cursor 09 "C-l 0d 0a 0d 0a 09 "search 09 09 "C-s 09 09 "toggle 20 "colors 09 "M-c 0d 0a 09 "regex 20 "search 09 "M-s 09 09 "toggle 20 "tabs 09 "M-t 0d 0a 09 "next 20 "match 09 "C-s 20 "(n) 0d 0a 09 "prev 20 "match 09 "C-r 20 "(p) 0d 0a 09 "end 20 "search 09 "enter 0d 0a 09 "cancel 20 "search 09 "C-g 0d 0a 0d 0a 09 09 09 "press 20 "any 20 "key 20 "to 20 "continue... 0d 0a 00 ( perform the undo action ) @undo ( -> ) #01 .state/in-undo STZ ;undo-stack/pos LDA2 ;undo-stack/data EQU2 ?&noop ;undo-stack/pos LDA2 #0003 SUB2 DUP2 ;undo-stack/pos STA2 LDA2k STH2 ( pos [addr] ) INC2 INC2 LDA STH2r ( c addr ) jump-to-pos DUP #00 EQU ?&delete DUP #0a EQU ?&newline DUP #09 EQU ?&tab !insert &newline POP !newline &tab POP !insert-tab &delete POP !delete &noop BRK ( free up space in the undo stack by evicting the oldest entry ) @u-free ( -> ) ;undo-stack/data STH2k #0003 ADD2 ( st+3 [st] ) &loop LDAk STH2kr STA INC2 INC2r DUP2 ;undo-stack/pos LDA2 LTH2 ?&loop ;undo-stack/pos LDA2k #0003 SUB2 SWP2 STA2 POP2 POP2r JMP2r ( push a new item on the undo stack ) @u-push ( c^ addr* -> ) ;undo-stack/pos DUP2 LDA2 ( c^ addr* top* pos* ) GTH2 ( c^ addr* top>pos^ ) ?&has-room ( c^ addr* ) u-free &has-room ;undo-stack/pos LDA2 ( c^ addr* pos* ) STH2k ( c addr pos [pos] ) STA2 ( c [pos] ) STH2r INC2 INC2 STH2k ( c pos+2 [pos+2] ) STA ( [pos+2] ) STH2r INC2 ( pos+3 ) ;undo-stack/pos STA2 ( [] ) JMP2r ( path to file being edited ) @filename $80 ( stack of data to undo ) ( ) ( each item in the stack consists of: ) ( - 2 bytes: address to jump to ) ( - 1 byte: character to insert, or \0 to delete ) ( ) ( pos points to the next open stack frame. ) ( when pos points to data the stack is empty. ) ( when pos points to pos the stack is full. ) @undo-stack [ &data $180 ( 128 steps ) &pos :undo-stack/data ] ( actual file data to be edited ) @data $ce80 ( end of femto.tal )