po/fr: improve wording for help for --lzma1/--lzma2.

Thanks to Adrien Nader.

AUTHORS

@@ -16,11 +16,11 @@ Authors of XZ Utils
 
     Some scripts have been adapted from gzip. The original versions
     were written by Jean-loup Gailly, Charles Levert, and Paul Eggert.
-    Andrew Dudman helped adapting the script and their man pages for
+    Andrew Dudman helped adapting the scripts and their man pages for
     XZ Utils.
 
-    The GNU Autotools based build system contains files from many authors,
-    which I'm not trying list here.
+    The GNU Autotools-based build system contains files from many authors,
+    which I'm not trying to list here.
 
     Several people have contributed fixes or reported bugs. Most of them
     are mentioned in the file THANKS.

INSTALL

@@ -6,12 +6,14 @@ XZ Utils Installation
     1. Supported platforms
        1.1. Compilers
        1.2. Platform-specific notes
-            1.2.1. IRIX
-            1.2.2. MINIX 3
-            1.2.3. OpenVMS
-            1.2.4. Tru64
-            1.2.5. Windows
-            1.2.6. DOS
+            1.2.1. AIX
+            1.2.2. IRIX
+            1.2.3. MINIX 3
+            1.2.4. OpenVMS
+            1.2.5. Solaris, OpenSolaris, and derivatives
+            1.2.6. Tru64
+            1.2.7. Windows
+            1.2.8. DOS
        1.3. Adding support for new platforms
     2. configure options
        2.1. Static vs. dynamic linking of liblzma
@@ -24,6 +26,8 @@ XZ Utils Installation
        4.2. "No POSIX conforming shell (sh) was found."
        4.3. configure works but build fails at crc32_x86.S
        4.4. Lots of warnings about symbol visibility
+       4.5. "make check" fails
+       4.6. liblzma.so (or similar) not found when running xz
 
 
 0. Preface
@@ -62,23 +66,36 @@ XZ Utils Installation
 
 1.2. Platform-specific notes
 
-1.2.1. IRIX
+1.2.1. AIX
+
+    If you use IBM XL C compiler, pass CC=xlc_r to configure. If
+    you use CC=xlc instead, you must disable threading support
+    with --disable-threads (usually not recommended).
+
+
+1.2.2. IRIX
 
     MIPSpro 7.4.4m has been reported to produce broken code if using
     the -O2 optimization flag ("make check" fails). Using -O1 should
     work.
 
+    A problem has been reported when using shared liblzma. Passing
+    --disable-shared to configure works around this. Alternatively,
+    putting "-64" to CFLAGS to build a 64-bit version might help too.
 
-1.2.2. MINIX 3
+
+1.2.3. MINIX 3
 
     The default install of MINIX 3 includes Amsterdam Compiler Kit (ACK),
     which doesn't support C99. Install GCC to compile XZ Utils.
 
-    MINIX 3.1.8 (and possibly some other versions too) has bugs in
-    /usr/include/stdint.h, which has to be patched before XZ Utils
-    can be compiled correctly. See
+    MINIX 3.1.8 and older have bugs in /usr/include/stdint.h, which has
+    to be patched before XZ Utils can be compiled correctly. See
     <http://gforge.cs.vu.nl/gf/project/minix/tracker/?action=TrackerItemEdit&tracker_item_id=537>.
 
+    MINIX 3.2.0 and later use a different libc and aren't affected by
+    the above bug.
+
     XZ Utils doesn't have code to detect the amount of physical RAM and
     number of CPU cores on MINIX 3.
 
@@ -86,7 +103,7 @@ XZ Utils Installation
     may want to pass gl_cv_cc_visibility=no to configure).
 
 
-1.2.3. OpenVMS
+1.2.4. OpenVMS
 
     XZ Utils can be built for OpenVMS, but the build system files
     are not included in the XZ Utils source package. The required
@@ -96,14 +113,24 @@ XZ Utils Installation
         http://nchrem.tnw.tudelft.nl/openvms/software2.html#xzutils
 
 
-1.2.4. Tru64
+1.2.5. Solaris, OpenSolaris, and derivatives
+
+    The following linker error has been reported on some x86 systems:
+
+        ld: fatal: relocation error: R_386_GOTOFF: ...
+
+    This can be worked around by passing gl_cv_cc_visibility=no
+    as an argument to the configure script.
+
+
+1.2.6. Tru64
 
     If you try to use the native C compiler on Tru64 (passing CC=cc to
     configure), you may need the workaround mention in section 4.1 in
     this file (pass also ac_cv_prog_cc_c99= to configure).
 
 
-1.2.5. Windows
+1.2.7. Windows
 
     Building XZ Utils on Windows is supported under MinGW + MSYS,
     MinGW-w64 + MSYS, and Cygwin. There is windows/build.bash to
@@ -123,7 +150,7 @@ XZ Utils Installation
     windows/README-Windows.txt for details.
 
 
-1.2.6. DOS
+1.2.8. DOS
 
     There is an experimental Makefile in the "dos" directory to build
     XZ Utils on DOS using DJGPP. Support for long file names (LFN) is
@@ -226,6 +253,12 @@ XZ Utils Installation
                 Don't install the scripts xzdiff, xzgrep, xzmore, xzless,
                 and their symlinks.
 
+    --disable-doc
+                Don't install the documentation files to $docdir
+                (often /usr/doc/xz or /usr/local/doc/xz). Man pages
+                will still be installed. The $docdir can be changed
+                with --docdir=DIR.
+
     --disable-assembler
                 liblzma includes some assembler optimizations. Currently
                 there is only assembler code for CRC32 and CRC64 for
@@ -438,3 +471,36 @@ XZ Utils Installation
     resulting binaries, but fewer warnings looks nicer and may allow
     using --enable-werror.
 
+
+4.5. "make check" fails
+
+    If the other tests pass but test_scripts.sh fails, then the problem
+    is in the scripts in src/scripts. Comparing the contents of
+    tests/xzgrep_test_output to tests/xzgrep_expected_output might
+    give a good idea about problems in xzgrep. One possibility is that
+    some tools are missing from the current PATH or the tools lack
+    support for some POSIX features. This can happen at least on
+    Solaris where the tools in /bin may be ancient but good enough
+    tools are available in /usr/xpg4/bin or /usr/xpg6/bin. One fix
+    for this problem is described in section 3.2 of this file.
+
+    If tests other than test_scripts.sh fail, a likely reason is that
+    libtool links the test programs against an installed version of
+    liblzma instead of the version that was just built. This is
+    obviously a bug which seems to happen on some platforms.
+    A workaround is to uninstall the old liblzma versions first.
+
+    If the problem isn't any of those described above, then it's likely
+    a bug in XZ Utils or in the compiler. See the platform-specific
+    notes in this file for possible known problems. Please report
+    a bug if you cannot solve the problem. See README for contact
+    information.
+
+
+4.6. liblzma.so (or similar) not found when running xz
+
+    If you installed the package with "make install" and get an error
+    about liblzma.so (or a similarly named file) being missing, try
+    running "ldconfig" to update the run-time linker cache (if your
+    operating system has such a command).
+

Makefile.am

@@ -5,6 +5,9 @@
 ## You can do whatever you want with this file.
 ##
 
+# Use -n to prevent gzip from adding a timestamp to the .gz headers.
+GZIP_ENV = -9n
+
 DIST_SUBDIRS = lib src po tests debug
 SUBDIRS =
 
@@ -14,6 +17,7 @@ endif
 
 SUBDIRS += src po tests
 
+if COND_DOC
 dist_doc_DATA = \
 	AUTHORS \
 	COPYING \
@@ -29,13 +33,23 @@ dist_doc_DATA = \
 
 examplesdir = $(docdir)/examples
 dist_examples_DATA = \
-	doc/examples/xz_pipe_comp.c \
-	doc/examples/xz_pipe_decomp.c
+	doc/examples/00_README.txt \
+	doc/examples/01_compress_easy.c \
+	doc/examples/02_decompress.c \
+	doc/examples/03_compress_custom.c \
+	doc/examples/Makefile
+
+examplesolddir = $(docdir)/examples_old
+dist_examplesold_DATA = \
+	doc/examples_old/xz_pipe_comp.c \
+	doc/examples_old/xz_pipe_decomp.c
+endif
 
 EXTRA_DIST = \
 	extra \
 	dos \
 	windows \
+	macosx \
 	autogen.sh \
 	Doxyfile.in \
 	COPYING.GPLv2 \

NEWS

@@ -1,6 +1,175 @@
 
-XZ Utils User-Visible Changes
-=============================
+XZ Utils Release Notes
+======================
+
+5.0.8 (2014-12-21)
+
+    * Fixed an old bug in xzgrep that affected OpenBSD and probably
+      a few other operating systems too.
+
+    * Updated French and German translations.
+
+    * Added support for detecting the amount of RAM on AmigaOS/AROS.
+
+    * Minor build system updates.
+
+
+5.0.7 (2014-09-20)
+
+    * Fix regressions introduced in 5.0.6:
+
+        - Fix building with non-GNU make.
+
+        - Fix invalid Libs.private value in liblzma.pc which broke
+          static linking against liblzma if the linker flags were
+          taken from pkg-config.
+
+
+5.0.6 (2014-09-14)
+
+    * xzgrep now exits with status 0 if at least one file matched.
+
+    * A few minor portability and build system fixes
+
+
+5.0.5 (2013-06-30)
+
+    * lzmadec and liblzma's lzma_alone_decoder(): Support decompressing
+      .lzma files that have less common settings in the headers
+      (dictionary size other than 2^n or 2^n + 2^(n-1), or uncompressed
+      size greater than 256 GiB). The limitations existed to avoid false
+      positives when detecting .lzma files. The lc + lp <= 4 limitation
+      still remains since liblzma's LZMA decoder has that limitation.
+
+      NOTE: xz's .lzma support or liblzma's lzma_auto_decoder() are NOT
+      affected by this change. They still consider uncommon .lzma headers
+      as not being in the .lzma format. Changing this would give way too
+      many false positives.
+
+    * xz:
+
+        - Interaction of preset and custom filter chain options was
+          made less illogical. This affects only certain less typical
+          uses cases so few people are expected to notice this change.
+
+          Now when a custom filter chain option (e.g. --lzma2) is
+          specified, all preset options (-0 ... -9, -e) earlier are on
+          the command line are completely forgotten. Similarly, when
+          a preset option is specified, all custom filter chain options
+          earlier on the command line are completely forgotten.
+
+          Example 1: "xz -9 --lzma2=preset=5 -e" is equivalent to "xz -e"
+          which is equivalent to "xz -6e". Earlier -e didn't put xz back
+          into preset mode and thus the example command was equivalent
+          to "xz --lzma2=preset=5".
+
+          Example 2: "xz -9e --lzma2=preset=5 -7" is equivalent to
+          "xz -7". Earlier a custom filter chain option didn't make
+          xz forget the -e option so the example was equivalent to
+          "xz -7e".
+
+        - Fixes and improvements to error handling.
+
+        - Various fixes to the man page.
+
+    * xzless: Fixed to work with "less" versions 448 and later.
+
+    * xzgrep: Made -h an alias for --no-filename.
+
+    * Include the previously missing debug/translation.bash which can
+      be useful for translators.
+
+    * Include a build script for Mac OS X. This has been in the Git
+      repository since 2010 but due to a mistake in Makefile.am the
+      script hasn't been included in a release tarball before.
+
+
+5.0.4 (2012-06-22)
+
+    * liblzma:
+
+        - Fix lzma_index_init(). It could crash if memory allocation
+          failed.
+
+        - Fix the possibility of an incorrect LZMA_BUF_ERROR when a BCJ
+          filter is used and the application only provides exactly as
+          much output space as is the uncompressed size of the file.
+
+        - Fix a bug in doc/examples_old/xz_pipe_decompress.c. It didn't
+          check if the last call to lzma_code() really returned
+          LZMA_STREAM_END, which made the program think that truncated
+          files are valid.
+
+        - New example programs in doc/examples (old programs are now in
+          doc/examples_old). These have more comments and more detailed
+          error handling.
+
+    * Fix "xz -lvv foo.xz". It could crash on some corrupted files.
+
+    * Fix output of "xz --robot -lv" and "xz --robot -lvv" which
+      incorrectly printed the filename also in the "foo (x/x)" format.
+
+    * Fix exit status of "xzdiff foo.xz bar.xz".
+
+    * Fix exit status of "xzgrep foo binary_file".
+
+    * Fix portability to EBCDIC systems.
+
+    * Fix a configure issue on AIX with the XL C compiler. See INSTALL
+      for details.
+
+    * Update French, German, Italian, and Polish translations.
+
+
+5.0.3 (2011-05-21)
+
+    * liblzma fixes:
+
+        - A memory leak was fixed.
+
+        - lzma_stream_buffer_encode() no longer creates an empty .xz
+          Block if encoding an empty buffer. Such an empty Block with
+          LZMA2 data would trigger a bug in 5.0.1 and older (see the
+          first bullet point in 5.0.2 notes). When releasing 5.0.2,
+          I thought that no encoder creates this kind of files but
+          I was wrong.
+
+        - Validate function arguments better in a few functions. Most
+          importantly, specifying an unsupported integrity check to
+          lzma_stream_buffer_encode() no longer creates a corrupt .xz
+          file. Probably no application tries to do that, so this
+          shouldn't be a big problem in practice.
+
+        - Document that lzma_block_buffer_encode(),
+          lzma_easy_buffer_encode(), lzma_stream_encoder(), and
+          lzma_stream_buffer_encode() may return LZMA_UNSUPPORTED_CHECK.
+
+        - The return values of the _memusage() functions are now
+          documented better.
+
+    * Fix command name detection in xzgrep. xzegrep and xzfgrep now
+      correctly use egrep and fgrep instead of grep.
+
+    * French translation was added.
+
+
+5.0.2 (2011-04-01)
+
+    * LZMA2 decompressor now correctly accepts LZMA2 streams with no
+      uncompressed data. Previously it considered them corrupt. The
+      bug can affect applications that use raw LZMA2 streams. It is
+      very unlikely to affect .xz files because no compressor creates
+      .xz files with empty LZMA2 streams. (Empty .xz files are a
+      different thing than empty LZMA2 streams.)
+
+    * "xz --suffix=.foo filename.foo" now refuses to compress the
+      file due to it already having the suffix .foo. It was already
+      documented on the man page, but the code lacked the test.
+
+    * "xzgrep -l foo bar.xz" works now.
+
+    * Polish translation was added.
+
 
 5.0.1 (2011-01-29)
 

README

@@ -5,7 +5,7 @@ XZ Utils
     0. Overview
     1. Documentation
        1.1. Overall documentation
-       1.2. Documentation for command line tools
+       1.2. Documentation for command-line tools
        1.3. Documentation for liblzma
     2. Version numbering
     3. Reporting bugs
@@ -17,21 +17,21 @@ XZ Utils
 0. Overview
 -----------
 
-    XZ Utils provide a general-purpose data compression library and
-    command line tools. The native file format is the .xz format, but
+    XZ Utils provide a general-purpose data-compression library plus
+    command-line tools. The native file format is the .xz format, but
     also the legacy .lzma format is supported. The .xz format supports
-    multiple compression algorithms, which are called "filters" in
+    multiple compression algorithms, which are called "filters" in the
     context of XZ Utils. The primary filter is currently LZMA2. With
     typical files, XZ Utils create about 30 % smaller files than gzip.
 
     To ease adapting support for the .xz format into existing applications
     and scripts, the API of liblzma is somewhat similar to the API of the
-    popular zlib library. For the same reason, the command line tool xz
-    has similar command line syntax than that of gzip.
+    popular zlib library. For the same reason, the command-line tool xz
+    has a command-line syntax similar to that of gzip.
 
-    When aiming for the highest compression ratio, LZMA2 encoder uses
+    When aiming for the highest compression ratio, the LZMA2 encoder uses
     a lot of CPU time and may use, depending on the settings, even
-    hundreds of megabytes of RAM. However, in fast modes, LZMA2 encoder
+    hundreds of megabytes of RAM. However, in fast modes, the LZMA2 encoder
     competes with bzip2 in compression speed, RAM usage, and compression
     ratio.
 
@@ -44,8 +44,8 @@ XZ Utils
     since that needs to be done only once to benefit many people.
 
     With some file types, combining (or "chaining") LZMA2 with an
-    additional filter can improve compression ratio. A filter chain may
-    contain up to four filters, although usually only one two is used.
+    additional filter can improve the compression ratio. A filter chain may
+    contain up to four filters, although usually only one or two are used.
     For example, putting a BCJ (Branch/Call/Jump) filter before LZMA2
     in the filter chain can improve compression ratio of executable files.
 
@@ -88,9 +88,9 @@ XZ Utils
     packages.
 
 
-1.2. Documentation for command line tools
+1.2. Documentation for command-line tools
 
-    The command line tools are documented as man pages. In source code
+    The command-line tools are documented as man pages. In source code
     releases (and possibly also in some binary packages), the man pages
     are also provided in plain text (ASCII only) and PDF formats in the
     directory "doc/man" to make the man pages more accessible to those
@@ -109,8 +109,8 @@ XZ Utils
     written yet.
 
     For now, if you have never used liblzma, libbzip2, or zlib, I
-    recommend learning *basics* of zlib API. Once you know that, it
-    should be easier to learn liblzma.
+    recommend learning the *basics* of the zlib API. Once you know that,
+    it should be easier to learn liblzma.
 
         http://zlib.net/manual.html
         http://zlib.net/zlib_how.html
@@ -124,23 +124,27 @@ XZ Utils
       - X is the major version. When this is incremented, the library
         API and ABI break.
 
-      - Y is the minor version. It is incremented when new features are
-        added without breaking existing API or ABI. Even Y indicates
-        stable release and odd Y indicates unstable (alpha or beta
-        version).
+      - Y is the minor version. It is incremented when new features
+        are added without breaking the existing API or ABI. An even Y
+        indicates a stable release and an odd Y indicates unstable
+        (alpha or beta version).
 
-      - Z is the revision. This has different meaning for stable and
+      - Z is the revision. This has a different meaning for stable and
         unstable releases:
+
           * Stable: Z is incremented when bugs get fixed without adding
-            any new features.
+            any new features. This is intended to be convenient for
+            downstream distributors that want bug fixes but don't want
+            any new features to minimize the risk of introducing new bugs.
+
           * Unstable: Z is just a counter. API or ABI of features added
             in earlier unstable releases having the same X.Y may break.
 
       - S indicates stability of the release. It is missing from the
-        stable releases where Y is an even number. When Y is odd, S
+        stable releases, where Y is an even number. When Y is odd, S
         is either "alpha" or "beta" to make it very clear that such
         versions are not stable releases. The same X.Y.Z combination is
-        not used for more than one stability level i.e. after X.Y.Zalpha,
+        not used for more than one stability level, i.e. after X.Y.Zalpha,
         the next version can be X.Y.(Z+1)beta but not X.Y.Zbeta.
 
 
@@ -176,7 +180,7 @@ XZ Utils
     Don't send core dump files or any executables. If you have a small
     example file(s) (total size less than 256 KiB), please include
     it/them as an attachment. If you have bigger test files, put them
-    online somewhere and include an URL to the file(s) in the bug report.
+    online somewhere and include a URL to the file(s) in the bug report.
 
     Always include the exact version number of XZ Utils in the bug report.
     If you are using a snapshot from the git repository, use "git describe"
@@ -193,7 +197,7 @@ XZ Utils
 
     The messages from the xz tool have been translated into a few
     languages. Before starting to translate into a new language, ask
-    the author that someone else hasn't already started working on it.
+    the author whether someone else hasn't already started working on it.
 
     Test your translation. Testing includes comparing the translated
     output to the original English version by running the same commands
@@ -206,15 +210,15 @@ XZ Utils
         # <Edit the .po file in the po directory.>
         make -C po update-po
         make install
-        bash debug/translations.bash | less
-        bash debug/translations.bash | less -S  # For --list outputs
+        bash debug/translation.bash | less
+        bash debug/translation.bash | less -S  # For --list outputs
 
     Repeat the above as needed (no need to re-run configure though).
 
     Note especially the following:
 
       - The output of --help and --long-help must look nice on
-        a 80-column terminal. It's OK to add extra lines if needed.
+        an 80-column terminal. It's OK to add extra lines if needed.
 
       - In contrast, don't add extra lines to error messages and such.
         They are often preceded with e.g. a filename on the same line,

THANKS

@@ -6,22 +6,32 @@ Some people have helped more, some less, but nevertheless everyone's help
 has been important. :-) In alphabetical order:
   - Mark Adler
   - H. Peter Anvin
+  - Jeff Bastian
   - Nelson H. F. Beebe
   - Karl Berry
   - Anders F. Björklund
   - Emmanuel Blot
+  - Martin Blumenstingl
+  - Jakub Bogusz
+  - Maarten Bosmans
   - Trent W. Buck
+  - James Buren
   - David Burklund
   - Daniel Mealha Cabrita
   - Milo Casagrande
   - Marek Černocký
+  - Tomer Chachamu
+  - Chris Donawa
   - Andrew Dudman
   - Markus Duft
   - İsmail Dönmez
   - Robert Elz
   - Gilles Espinasse
   - Denis Excoffier
+  - Michael Felt
   - Mike Frysinger
+  - Daniel Richard G.
+  - Jason Gorski
   - Juan Manuel Guerrero
   - Joachim Henke
   - Peter Ivanov
@@ -34,33 +44,46 @@ has been important. :-) In alphabetical order:
   - Peter Lawler
   - Hin-Tak Leung
   - Andraž 'ruskie' Levstik
+  - Cary Lewis
+  - Wim Lewis
   - Lorenzo De Liso
+  - Bela Lubkin
+  - Gregory Margo
   - Jim Meyering
+  - Conley Moorhous
   - Rafał Mużyło
   - Adrien Nader
   - Hongbo Ni
   - Jonathan Nieder
   - Andre Noll
   - Peter O'Gorman
+  - Peter Pallinger
   - Igor Pavlov
+  - Diego Elio Pettenò
   - Elbert Pol
   - Mikko Pouru
+  - Pavel Raiskup
   - Robert Readman
   - Bernhard Reutner-Fischer
+  - Eric S. Raymond
   - Cristian Rodríguez
   - Christian von Roques
   - Jukka Salmi
   - Alexandre Sauvé
+  - Benno Schulenberg
   - Andreas Schwab
   - Dan Shechter
   - Stuart Shelton
   - Jonathan Stott
+  - Dan Stromberg
   - Paul Townsend
   - Mohammed Adnène Trojette
   - Alexey Tourbin
   - Patrick J. Volkerding
+  - Martin Väth
   - Christian Weisgerber
   - Bert Wesarg
+  - Fredrik Wikstrom
   - Ralf Wildenhues
   - Charles Wilson
   - Lars Wirzenius

TODO

@@ -12,10 +12,6 @@ Known bugs
     it would be  possible by switching from BT2/BT3/BT4 match finder to
     HC3/HC4.
 
-    The code to detect number of CPU cores doesn't count hyperthreading
-    as multiple cores. In context of xz, it probably should.
-    Hyperthreading is good at least with p7zip.
-
     XZ Utils compress some files significantly worse than LZMA Utils.
     This is due to faster compression presets used by XZ Utils, and
     can often be worked around by using "xz --extreme". With some files

configure.ac

@@ -59,7 +59,7 @@ AM_CFLAGS=
 #############
 
 AC_MSG_CHECKING([if debugging code should be compiled])
-AC_ARG_ENABLE([debug], AC_HELP_STRING([--enable-debug], [Enable debugging code.]),
+AC_ARG_ENABLE([debug], AS_HELP_STRING([--enable-debug], [Enable debugging code.]),
 	[], enable_debug=no)
 if test "x$enable_debug" = xyes; then
 	AC_MSG_RESULT([yes])
@@ -84,7 +84,7 @@ enable_decoder_[]NAME=no
 ])dnl
 
 AC_MSG_CHECKING([which encoders to build])
-AC_ARG_ENABLE([encoders], AC_HELP_STRING([--enable-encoders=LIST],
+AC_ARG_ENABLE([encoders], AS_HELP_STRING([--enable-encoders=LIST],
 		[Comma-separated list of encoders to build. Default=all.
 		Available encoders:]
 			m4_translit(m4_defn([SUPPORTED_FILTERS]), [,], [ ])),
@@ -112,7 +112,7 @@ else
 fi
 
 AC_MSG_CHECKING([which decoders to build])
-AC_ARG_ENABLE([decoders], AC_HELP_STRING([--enable-decoders=LIST],
+AC_ARG_ENABLE([decoders], AS_HELP_STRING([--enable-decoders=LIST],
 		[Comma-separated list of decoders to build. Default=all.
 		Available decoders are the same as available encoders.]),
 	[], [enable_decoders=SUPPORTED_FILTERS])
@@ -195,7 +195,7 @@ m4_foreach([NAME], [SUPPORTED_MATCH_FINDERS],
 ])
 
 AC_MSG_CHECKING([which match finders to build])
-AC_ARG_ENABLE([match-finders], AC_HELP_STRING([--enable-match-finders=LIST],
+AC_ARG_ENABLE([match-finders], AS_HELP_STRING([--enable-match-finders=LIST],
 		[Comma-separated list of match finders to build. Default=all.
 		At least one match finder is required for encoding with
 		the LZMA1 and LZMA2 filters. Available match finders:]
@@ -229,12 +229,12 @@ fi
 
 m4_define([SUPPORTED_CHECKS], [crc32,crc64,sha256])
 
-m4_foreach([NAME], [SUPPORTED_FILTERS],
+m4_foreach([NAME], [SUPPORTED_CHECKS],
 [enable_check_[]NAME=no
 ])dnl
 
 AC_MSG_CHECKING([which integrity checks to build])
-AC_ARG_ENABLE([checks], AC_HELP_STRING([--enable-checks=LIST],
+AC_ARG_ENABLE([checks], AS_HELP_STRING([--enable-checks=LIST],
 		[Comma-separated list of integrity checks to build.
 		Default=all. Available integrity checks:]
 		m4_translit(m4_defn([SUPPORTED_CHECKS]), [,], [ ])),
@@ -260,7 +260,7 @@ else
 	done
 	AC_MSG_RESULT([$enable_checks])
 fi
-if test "x$enable_checks_crc32" = xno ; then
+if test "x$enable_check_crc32" = xno ; then
 	AC_MSG_ERROR([For now, the CRC32 check must always be enabled.])
 fi
 
@@ -274,7 +274,7 @@ m4_foreach([NAME], [SUPPORTED_CHECKS],
 ###########################
 
 AC_MSG_CHECKING([if assembler optimizations should be used])
-AC_ARG_ENABLE([assembler], AC_HELP_STRING([--disable-assembler],
+AC_ARG_ENABLE([assembler], AS_HELP_STRING([--disable-assembler],
 		[Do not use assembler optimizations even if such exist
 		for the architecture.]),
 	[], [enable_assembler=yes])
@@ -297,7 +297,7 @@ case $enable_assembler in
 		;;
 	*)
 		AC_MSG_RESULT([])
-		AC_MSG_ERROR([--enable-assembler accepts only \`yes', \`no', \`x86', or \`x86_64'.])
+		AC_MSG_ERROR([--enable-assembler accepts only `yes', `no', `x86', or `x86_64'.])
 		;;
 esac
 AM_CONDITIONAL(COND_ASM_X86, test "x$enable_assembler" = xx86)
@@ -309,7 +309,7 @@ AM_CONDITIONAL(COND_ASM_X86_64, test "x$enable_assembler" = xx86_64)
 #####################
 
 AC_MSG_CHECKING([if small size is preferred over speed])
-AC_ARG_ENABLE([small], AC_HELP_STRING([--enable-small],
+AC_ARG_ENABLE([small], AS_HELP_STRING([--enable-small],
 		[Make liblzma smaller and a little slower.
 		This is disabled by default to optimize for speed.]),
 	[], [enable_small=no])
@@ -317,7 +317,7 @@ if test "x$enable_small" = xyes; then
 	AC_DEFINE([HAVE_SMALL], [1], [Define to 1 if optimizing for size.])
 elif test "x$enable_small" != xno; then
 	AC_MSG_RESULT([])
-	AC_MSG_ERROR([--enable-small accepts only \`yes' or \`no'])
+	AC_MSG_ERROR([--enable-small accepts only `yes' or `no'])
 fi
 AC_MSG_RESULT([$enable_small])
 AM_CONDITIONAL(COND_SMALL, test "x$enable_small" = xyes)
@@ -328,13 +328,13 @@ AM_CONDITIONAL(COND_SMALL, test "x$enable_small" = xyes)
 #############
 
 AC_MSG_CHECKING([if threading support is wanted])
-AC_ARG_ENABLE([threads], AC_HELP_STRING([--disable-threads],
+AC_ARG_ENABLE([threads], AS_HELP_STRING([--disable-threads],
 		[Disable threading support.
 		This makes some things thread-unsafe.]),
 	[], [enable_threads=yes])
 if test "x$enable_threads" != xyes && test "x$enable_threads" != xno; then
 	AC_MSG_RESULT([])
-	AC_MSG_ERROR([--enable-threads accepts only \`yes' or \`no'])
+	AC_MSG_ERROR([--enable-threads accepts only `yes' or `no'])
 fi
 AC_MSG_RESULT([$enable_threads])
 # We use the actual result a little later.
@@ -349,7 +349,7 @@ AC_MSG_RESULT([$enable_threads])
 # but most systems, on which we don't have any way to determine the amount
 # of RAM, will probably have at least 128 MiB of RAM.
 AC_MSG_CHECKING([how much RAM to assume if the real amount is unknown])
-AC_ARG_ENABLE([assume-ram], AC_HELP_STRING([--enable-assume-ram=SIZE],
+AC_ARG_ENABLE([assume-ram], AS_HELP_STRING([--enable-assume-ram=SIZE],
 		[If and only if the real amount of RAM cannot be determined,
 		assume SIZE MiB. The default is 128 MiB. This affects the
 		default memory usage limit.]),
@@ -369,39 +369,45 @@ AC_DEFINE_UNQUOTED([ASSUME_RAM], [$enable_assume_ram],
 # Components to install #
 #########################
 
-AC_ARG_ENABLE([xz], [AC_HELP_STRING([--disable-xz],
+AC_ARG_ENABLE([xz], [AS_HELP_STRING([--disable-xz],
 		[do not build the xz tool])],
 	[], [enable_xz=yes])
 AM_CONDITIONAL([COND_XZ], [test x$enable_xz != xno])
 
-AC_ARG_ENABLE([xzdec], [AC_HELP_STRING([--disable-xzdec],
+AC_ARG_ENABLE([xzdec], [AS_HELP_STRING([--disable-xzdec],
 		[do not build xzdec])],
 	[], [enable_xzdec=yes])
 AM_CONDITIONAL([COND_XZDEC], [test x$enable_xzdec != xno])
 
-AC_ARG_ENABLE([lzmadec], [AC_HELP_STRING([--disable-lzmadec],
+AC_ARG_ENABLE([lzmadec], [AS_HELP_STRING([--disable-lzmadec],
 		[do not build lzmadec
 		(it exists primarily for LZMA Utils compatibility)])],
 	[], [enable_lzmadec=yes])
 AM_CONDITIONAL([COND_LZMADEC], [test x$enable_lzmadec != xno])
 
-AC_ARG_ENABLE([lzmainfo], [AC_HELP_STRING([--disable-lzmainfo],
+AC_ARG_ENABLE([lzmainfo], [AS_HELP_STRING([--disable-lzmainfo],
 		[do not build lzmainfo
 		(it exists primarily for LZMA Utils compatibility)])],
 	[], [enable_lzmainfo=yes])
 AM_CONDITIONAL([COND_LZMAINFO], [test x$enable_lzmainfo != xno])
 
-AC_ARG_ENABLE([lzma-links], [AC_HELP_STRING([--disable-lzma-links],
+AC_ARG_ENABLE([lzma-links], [AS_HELP_STRING([--disable-lzma-links],
 		[do not create symlinks for LZMA Utils compatibility])],
 	[], [enable_lzma_links=yes])
 AM_CONDITIONAL([COND_LZMALINKS], [test x$enable_lzma_links != xno])
 
-AC_ARG_ENABLE([scripts], [AC_HELP_STRING([--disable-scripts],
+AC_ARG_ENABLE([scripts], [AS_HELP_STRING([--disable-scripts],
 		[do not install the scripts xzdiff, xzgrep, xzless, xzmore,
 		and their symlinks])],
 	[], [enable_scripts=yes])
 AM_CONDITIONAL([COND_SCRIPTS], [test x$enable_scripts != xno])
 
+AC_ARG_ENABLE([doc], [AS_HELP_STRING([--disable-doc],
+		[do not install documentation files to docdir
+		(man pages will still be installed)])],
+	[], [enable_doc=yes])
+AM_CONDITIONAL([COND_DOC], [test x$enable_doc != xno])
+
 
 ###############################################################################
 # Checks for programs.
@@ -416,7 +422,7 @@ fi
 echo
 echo "Initializing Automake:"
 
-AM_INIT_AUTOMAKE([1.10 foreign tar-v7 filename-length-max=99])
+AM_INIT_AUTOMAKE([1.12 foreign tar-v7 filename-length-max=99 serial-tests])
 AC_PROG_LN_S
 
 AC_PROG_CC_C99
@@ -431,10 +437,14 @@ AC_USE_SYSTEM_EXTENSIONS
 if test "x$enable_threads" = xyes; then
 	echo
 	echo "Threading support:"
-	ACX_PTHREAD
+	AX_PTHREAD
 	LIBS="$LIBS $PTHREAD_LIBS"
 	AM_CFLAGS="$AM_CFLAGS $PTHREAD_CFLAGS"
-	CC="$PTHREAD_CC"
+
+	dnl NOTE: PTHREAD_CC is ignored. It would be useful on AIX, but
+	dnl it's tricky to get it right together with AC_PROG_CC_C99.
+	dnl Thus, this is handled by telling the user in INSTALL to set
+	dnl the correct CC manually.
 fi
 
 echo
@@ -456,7 +466,7 @@ AM_CONDITIONAL([COND_SHARED], [test "x$enable_shared" != xno])
 
 echo
 echo "Initializing gettext:"
-AM_GNU_GETTEXT_VERSION([0.16.1])
+AM_GNU_GETTEXT_VERSION([0.18])
 AM_GNU_GETTEXT([external])
 
 ###############################################################################
@@ -494,7 +504,7 @@ AC_TYPE_UINTPTR_T
 AC_CHECK_SIZEOF([size_t])
 
 # The command line tool can copy high resolution timestamps if such
-# information is availabe in struct stat. Otherwise one second accuracy
+# information is available in struct stat. Otherwise one second accuracy
 # is used.
 AC_CHECK_MEMBERS([
 	struct stat.st_atim.tv_nsec,
@@ -556,6 +566,7 @@ if test "$GCC" = yes ; then
 	for NEW_FLAG in \
 			-Wall \
 			-Wextra \
+			-Wvla \
 			-Wformat=2 \
 			-Winit-self \
 			-Wmissing-include-dirs \
@@ -577,8 +588,9 @@ if test "$GCC" = yes ; then
 	do
 		AC_MSG_CHECKING([if $CC accepts $NEW_FLAG])
 		OLD_CFLAGS="$CFLAGS"
-		CFLAGS="$CFLAGS $NEW_FLAG"
-		AC_COMPILE_IFELSE([AC_LANG_SOURCE([void foo(void) { }])], [
+		CFLAGS="$CFLAGS $NEW_FLAG -Werror"
+		AC_COMPILE_IFELSE([AC_LANG_SOURCE(
+				[void foo(void); void foo(void) { }])], [
 			AM_CFLAGS="$AM_CFLAGS $NEW_FLAG"
 			AC_MSG_RESULT([yes])
 		], [
@@ -588,7 +600,7 @@ if test "$GCC" = yes ; then
 	done
 
 	AC_ARG_ENABLE([werror],
-		AC_HELP_STRING([--enable-werror], [Enable -Werror to abort
+		AS_HELP_STRING([--enable-werror], [Enable -Werror to abort
 			compilation on all compiler warnings.]),
 		[], [enable_werror=no])
 	if test "x$enable_werror" = "xyes"; then
@@ -620,20 +632,19 @@ AC_CONFIG_FILES([
 	po/Makefile.in
 	lib/Makefile
 	src/Makefile
-	src/liblzma/liblzma.pc
 	src/liblzma/Makefile
 	src/liblzma/api/Makefile
 	src/xz/Makefile
 	src/xzdec/Makefile
 	src/lzmainfo/Makefile
 	src/scripts/Makefile
-	src/scripts/xzdiff
-	src/scripts/xzgrep
-	src/scripts/xzmore
-	src/scripts/xzless
 	tests/Makefile
 	debug/Makefile
 ])
+AC_CONFIG_FILES([src/scripts/xzdiff], [chmod +x src/scripts/xzdiff])
+AC_CONFIG_FILES([src/scripts/xzgrep], [chmod +x src/scripts/xzgrep])
+AC_CONFIG_FILES([src/scripts/xzmore], [chmod +x src/scripts/xzmore])
+AC_CONFIG_FILES([src/scripts/xzless], [chmod +x src/scripts/xzless])
 
 AC_OUTPUT
 

debug/Makefile.am

@@ -5,6 +5,9 @@
 ## You can do whatever you want with this file.
 ##
 
+EXTRA_DIST = \
+	translation.bash
+
 noinst_PROGRAMS = \
 	repeat \
 	sync_flush \

debug/README

@@ -3,7 +3,7 @@ Debug tools
 -----------
 
     This directory contains a few tiny programs that may be helpful when
-    debugging LZMA Utils.
+    debugging XZ Utils.
 
     These tools are not meant to be installed. Often one needs to edit
     the source code a little to make the programs do the wanted things.

doc/examples/00_README.txt

@@ -0,0 +1,27 @@
+
+liblzma example programs
+========================
+
+Introduction
+
+    The examples are written so that the same comments aren't
+    repeated (much) in later files.
+
+    On POSIX systems, the examples should build by just typing "make".
+
+    The examples that use stdin or stdout don't set stdin and stdout
+    to binary mode. On systems where it matters (e.g. Windows) it is
+    possible that the examples won't work without modification.
+
+
+List of examples
+
+    01_compress_easy.c                  Multi-call compression using
+                                        a compression preset
+
+    02_decompress.c                     Multi-call decompression
+
+    03_compress_custom.c                Like 01_compress_easy.c but using
+                                        a custom filter chain
+                                        (x86 BCJ + LZMA2)
+

doc/examples/01_compress_easy.c

@@ -0,0 +1,297 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file       01_compress_easy.c
+/// \brief      Compress from stdin to stdout in multi-call mode
+///
+/// Usage:      ./01_compress_easy PRESET < INFILE > OUTFILE
+///
+/// Example:    ./01_compress_easy 6 < foo > foo.xz
+//
+//  Author:     Lasse Collin
+//
+//  This file has been put into the public domain.
+//  You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#include <stdbool.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <lzma.h>
+
+
+static void
+show_usage_and_exit(const char *argv0)
+{
+	fprintf(stderr, "Usage: %s PRESET < INFILE > OUTFILE\n"
+			"PRESET is a number 0-9 and can optionally be "
+			"followed by `e' to indicate extreme preset\n",
+			argv0);
+	exit(EXIT_FAILURE);
+}
+
+
+static uint32_t
+get_preset(int argc, char **argv)
+{
+	// One argument whose first char must be 0-9.
+	if (argc != 2 || argv[1][0] < '0' || argv[1][0] > '9')
+		show_usage_and_exit(argv[0]);
+
+	// Calculate the preste level 0-9.
+	uint32_t preset = argv[1][0] - '0';
+
+	// If there is a second char, it must be 'e'. It will set
+	// the LZMA_PRESET_EXTREME flag.
+	if (argv[1][1] != '\0') {
+		if (argv[1][1] != 'e' || argv[1][2] != '\0')
+			show_usage_and_exit(argv[0]);
+
+		preset |= LZMA_PRESET_EXTREME;
+	}
+
+	return preset;
+}
+
+
+static bool
+init_encoder(lzma_stream *strm, uint32_t preset)
+{
+	// Initialize the encoder using a preset. Set the integrity to check
+	// to CRC64, which is the default in the xz command line tool. If
+	// the .xz file needs to be decompressed with XZ Embedded, use
+	// LZMA_CHECK_CRC32 instead.
+	lzma_ret ret = lzma_easy_encoder(strm, preset, LZMA_CHECK_CRC64);
+
+	// Return successfully if the initialization went fine.
+	if (ret == LZMA_OK)
+		return true;
+
+	// Something went wrong. The possible errors are documented in
+	// lzma/container.h (src/liblzma/api/lzma/container.h in the source
+	// package or e.g. /usr/include/lzma/container.h depending on the
+	// install prefix).
+	const char *msg;
+	switch (ret) {
+	case LZMA_MEM_ERROR:
+		msg = "Memory allocation failed";
+		break;
+
+	case LZMA_OPTIONS_ERROR:
+		msg = "Specified preset is not supported";
+		break;
+
+	case LZMA_UNSUPPORTED_CHECK:
+		msg = "Specified integrity check is not supported";
+		break;
+
+	default:
+		// This is most likely LZMA_PROG_ERROR indicating a bug in
+		// this program or in liblzma. It is inconvenient to have a
+		// separate error message for errors that should be impossible
+		// to occur, but knowing the error code is important for
+		// debugging. That's why it is good to print the error code
+		// at least when there is no good error message to show.
+		msg = "Unknown error, possibly a bug";
+		break;
+	}
+
+	fprintf(stderr, "Error initializing the encoder: %s (error code %u)\n",
+			msg, ret);
+	return false;
+}
+
+
+static bool
+compress(lzma_stream *strm, FILE *infile, FILE *outfile)
+{
+	// This will be LZMA_RUN until the end of the input file is reached.
+	// This tells lzma_code() when there will be no more input.
+	lzma_action action = LZMA_RUN;
+
+	// Buffers to temporarily hold uncompressed input
+	// and compressed output.
+	uint8_t inbuf[BUFSIZ];
+	uint8_t outbuf[BUFSIZ];
+
+	// Initialize the input and output pointers. Initializing next_in
+	// and avail_in isn't really necessary when we are going to encode
+	// just one file since LZMA_STREAM_INIT takes care of initializing
+	// those already. But it doesn't hurt much and it will be needed
+	// if encoding more than one file like we will in 02_decompress.c.
+	//
+	// While we don't care about strm->total_in or strm->total_out in this
+	// example, it is worth noting that initializing the encoder will
+	// always reset total_in and total_out to zero. But the encoder
+	// initialization doesn't touch next_in, avail_in, next_out, or
+	// avail_out.
+	strm->next_in = NULL;
+	strm->avail_in = 0;
+	strm->next_out = outbuf;
+	strm->avail_out = sizeof(outbuf);
+
+	// Loop until the file has been successfully compressed or until
+	// an error occurs.
+	while (true) {
+		// Fill the input buffer if it is empty.
+		if (strm->avail_in == 0 && !feof(infile)) {
+			strm->next_in = inbuf;
+			strm->avail_in = fread(inbuf, 1, sizeof(inbuf),
+					infile);
+
+			if (ferror(infile)) {
+				fprintf(stderr, "Read error: %s\n",
+						strerror(errno));
+				return false;
+			}
+
+			// Once the end of the input file has been reached,
+			// we need to tell lzma_code() that no more input
+			// will be coming and that it should finish the
+			// encoding.
+			if (feof(infile))
+				action = LZMA_FINISH;
+		}
+
+		// Tell liblzma do the actual encoding.
+		//
+		// This reads up to strm->avail_in bytes of input starting
+		// from strm->next_in. avail_in will be decremented and
+		// next_in incremented by an equal amount to match the
+		// number of input bytes consumed.
+		//
+		// Up to strm->avail_out bytes of compressed output will be
+		// written starting from strm->next_out. avail_out and next_out
+		// will be incremented by an equal amount to match the number
+		// of output bytes written.
+		//
+		// The encoder has to do internal buffering, which means that
+		// it may take quite a bit of input before the same data is
+		// available in compressed form in the output buffer.
+		lzma_ret ret = lzma_code(strm, action);
+
+		// If the output buffer is full or if the compression finished
+		// successfully, write the data from the output bufffer to
+		// the output file.
+		if (strm->avail_out == 0 || ret == LZMA_STREAM_END) {
+			// When lzma_code() has returned LZMA_STREAM_END,
+			// the output buffer is likely to be only partially
+			// full. Calculate how much new data there is to
+			// be written to the output file.
+			size_t write_size = sizeof(outbuf) - strm->avail_out;
+
+			if (fwrite(outbuf, 1, write_size, outfile)
+					!= write_size) {
+				fprintf(stderr, "Write error: %s\n",
+						strerror(errno));
+				return false;
+			}
+
+			// Reset next_out and avail_out.
+			strm->next_out = outbuf;
+			strm->avail_out = sizeof(outbuf);
+		}
+
+		// Normally the return value of lzma_code() will be LZMA_OK
+		// until everything has been encoded.
+		if (ret != LZMA_OK) {
+			// Once everything has been encoded successfully, the
+			// return value of lzma_code() will be LZMA_STREAM_END.
+			//
+			// It is important to check for LZMA_STREAM_END. Do not
+			// assume that getting ret != LZMA_OK would mean that
+			// everything has gone well.
+			if (ret == LZMA_STREAM_END)
+				return true;
+
+			// It's not LZMA_OK nor LZMA_STREAM_END,
+			// so it must be an error code. See lzma/base.h
+			// (src/liblzma/api/lzma/base.h in the source package
+			// or e.g. /usr/include/lzma/base.h depending on the
+			// install prefix) for the list and documentation of
+			// possible values. Most values listen in lzma_ret
+			// enumeration aren't possible in this example.
+			const char *msg;
+			switch (ret) {
+			case LZMA_MEM_ERROR:
+				msg = "Memory allocation failed";
+				break;
+
+			case LZMA_DATA_ERROR:
+				// This error is returned if the compressed
+				// or uncompressed size get near 8 EiB
+				// (2^63 bytes) because that's where the .xz
+				// file format size limits currently are.
+				// That is, the possibility of this error
+				// is mostly theoretical unless you are doing
+				// something very unusual.
+				//
+				// Note that strm->total_in and strm->total_out
+				// have nothing to do with this error. Changing
+				// those variables won't increase or decrease
+				// the chance of getting this error.
+				msg = "File size limits exceeded";
+				break;
+
+			default:
+				// This is most likely LZMA_PROG_ERROR, but
+				// if this program is buggy (or liblzma has
+				// a bug), it may be e.g. LZMA_BUF_ERROR or
+				// LZMA_OPTIONS_ERROR too.
+				//
+				// It is inconvenient to have a separate
+				// error message for errors that should be
+				// impossible to occur, but knowing the error
+				// code is important for debugging. That's why
+				// it is good to print the error code at least
+				// when there is no good error message to show.
+				msg = "Unknown error, possibly a bug";
+				break;
+			}
+
+			fprintf(stderr, "Encoder error: %s (error code %u)\n",
+					msg, ret);
+			return false;
+		}
+	}
+}
+
+
+extern int
+main(int argc, char **argv)
+{
+	// Get the preset number from the command line.
+	uint32_t preset = get_preset(argc, argv);
+
+	// Initialize a lzma_stream structure. When it is allocated on stack,
+	// it is simplest to use LZMA_STREAM_INIT macro like below. When it
+	// is allocated on heap, using memset(strmptr, 0, sizeof(*strmptr))
+	// works (as long as NULL pointers are represented with zero bits
+	// as they are on practically all computers today).
+	lzma_stream strm = LZMA_STREAM_INIT;
+
+	// Initialize the encoder. If it succeeds, compress from
+	// stdin to stdout.
+	bool success = init_encoder(&strm, preset);
+	if (success)
+		success = compress(&strm, stdin, stdout);
+
+	// Free the memory allocated for the encoder. If we were encoding
+	// multiple files, this would only need to be done after the last
+	// file. See 02_decompress.c for handling of multiple files.
+	//
+	// It is OK to call lzma_end() multiple times or when it hasn't been
+	// actually used except initialized with LZMA_STREAM_INIT.
+	lzma_end(&strm);
+
+	// Close stdout to catch possible write errors that can occur
+	// when pending data is flushed from the stdio buffers.
+	if (fclose(stdout)) {
+		fprintf(stderr, "Write error: %s\n", strerror(errno));
+		success = false;
+	}
+
+	return success ? EXIT_SUCCESS : EXIT_FAILURE;
+}

doc/examples/02_decompress.c

@@ -0,0 +1,287 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file       02_decompress.c
+/// \brief      Decompress .xz files to stdout
+///
+/// Usage:      ./02_decompress INPUT_FILES... > OUTFILE
+///
+/// Example:    ./02_decompress foo.xz bar.xz > foobar
+//
+//  Author:     Lasse Collin
+//
+//  This file has been put into the public domain.
+//  You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#include <stdbool.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <lzma.h>
+
+
+static bool
+init_decoder(lzma_stream *strm)
+{
+	// Initialize a .xz decoder. The decoder supports a memory usage limit
+	// and a set of flags.
+	//
+	// The memory usage of the decompressor depends on the settings used
+	// to compress a .xz file. It can vary from less than a megabyte to
+	// a few gigabytes, but in practice (at least for now) it rarely
+	// exceeds 65 MiB because that's how much memory is required to
+	// decompress files created with "xz -9". Settings requiring more
+	// memory take extra effort to use and don't (at least for now)
+	// provide significantly better compression in most cases.
+	//
+	// Memory usage limit is useful if it is important that the
+	// decompressor won't consume gigabytes of memory. The need
+	// for limiting depends on the application. In this example,
+	// no memory usage limiting is used. This is done by setting
+	// the limit to UINT64_MAX.
+	//
+	// The .xz format allows concatenating compressed files as is:
+	//
+	//     echo foo | xz > foobar.xz
+	//     echo bar | xz >> foobar.xz
+	//
+	// When decompressing normal standalone .xz files, LZMA_CONCATENATED
+	// should always be used to support decompression of concatenated
+	// .xz files. If LZMA_CONCATENATED isn't used, the decoder will stop
+	// after the first .xz stream. This can be useful when .xz data has
+	// been embedded inside another file format.
+	//
+	// Flags other than LZMA_CONCATENATED are supported too, and can
+	// be combined with bitwise-or. See lzma/container.h
+	// (src/liblzma/api/lzma/container.h in the source package or e.g.
+	// /usr/include/lzma/container.h depending on the install prefix)
+	// for details.
+	lzma_ret ret = lzma_stream_decoder(
+			strm, UINT64_MAX, LZMA_CONCATENATED);
+
+	// Return successfully if the initialization went fine.
+	if (ret == LZMA_OK)
+		return true;
+
+	// Something went wrong. The possible errors are documented in
+	// lzma/container.h (src/liblzma/api/lzma/container.h in the source
+	// package or e.g. /usr/include/lzma/container.h depending on the
+	// install prefix).
+	//
+	// Note that LZMA_MEMLIMIT_ERROR is never possible here. If you
+	// specify a very tiny limit, the error will be delayed until
+	// the first headers have been parsed by a call to lzma_code().
+	const char *msg;
+	switch (ret) {
+	case LZMA_MEM_ERROR:
+		msg = "Memory allocation failed";
+		break;
+
+	case LZMA_OPTIONS_ERROR:
+		msg = "Unsupported decompressor flags";
+		break;
+
+	default:
+		// This is most likely LZMA_PROG_ERROR indicating a bug in
+		// this program or in liblzma. It is inconvenient to have a
+		// separate error message for errors that should be impossible
+		// to occur, but knowing the error code is important for
+		// debugging. That's why it is good to print the error code
+		// at least when there is no good error message to show.
+		msg = "Unknown error, possibly a bug";
+		break;
+	}
+
+	fprintf(stderr, "Error initializing the decoder: %s (error code %u)\n",
+			msg, ret);
+	return false;
+}
+
+
+static bool
+decompress(lzma_stream *strm, const char *inname, FILE *infile, FILE *outfile)
+{
+	// When LZMA_CONCATENATED flag was used when initializing the decoder,
+	// we need to tell lzma_code() when there will be no more input.
+	// This is done by setting action to LZMA_FINISH instead of LZMA_RUN
+	// in the same way as it is done when encoding.
+	//
+	// When LZMA_CONCATENATED isn't used, there is no need to use
+	// LZMA_FINISH to tell when all the input has been read, but it
+	// is still OK to use it if you want. When LZMA_CONCATENATED isn't
+	// used, the decoder will stop after the first .xz stream. In that
+	// case some unused data may be left in strm->next_in.
+	lzma_action action = LZMA_RUN;
+
+	uint8_t inbuf[BUFSIZ];
+	uint8_t outbuf[BUFSIZ];
+
+	strm->next_in = NULL;
+	strm->avail_in = 0;
+	strm->next_out = outbuf;
+	strm->avail_out = sizeof(outbuf);
+
+	while (true) {
+		if (strm->avail_in == 0 && !feof(infile)) {
+			strm->next_in = inbuf;
+			strm->avail_in = fread(inbuf, 1, sizeof(inbuf),
+					infile);
+
+			if (ferror(infile)) {
+				fprintf(stderr, "%s: Read error: %s\n",
+						inname, strerror(errno));
+				return false;
+			}
+
+			// Once the end of the input file has been reached,
+			// we need to tell lzma_code() that no more input
+			// will be coming. As said before, this isn't required
+			// if the LZMA_CONATENATED flag isn't used when
+			// initializing the decoder.
+			if (feof(infile))
+				action = LZMA_FINISH;
+		}
+
+		lzma_ret ret = lzma_code(strm, action);
+
+		if (strm->avail_out == 0 || ret == LZMA_STREAM_END) {
+			size_t write_size = sizeof(outbuf) - strm->avail_out;
+
+			if (fwrite(outbuf, 1, write_size, outfile)
+					!= write_size) {
+				fprintf(stderr, "Write error: %s\n",
+						strerror(errno));
+				return false;
+			}
+
+			strm->next_out = outbuf;
+			strm->avail_out = sizeof(outbuf);
+		}
+
+		if (ret != LZMA_OK) {
+			// Once everything has been decoded successfully, the
+			// return value of lzma_code() will be LZMA_STREAM_END.
+			//
+			// It is important to check for LZMA_STREAM_END. Do not
+			// assume that getting ret != LZMA_OK would mean that
+			// everything has gone well or that when you aren't
+			// getting more output it must have successfully
+			// decoded everything.
+			if (ret == LZMA_STREAM_END)
+				return true;
+
+			// It's not LZMA_OK nor LZMA_STREAM_END,
+			// so it must be an error code. See lzma/base.h
+			// (src/liblzma/api/lzma/base.h in the source package
+			// or e.g. /usr/include/lzma/base.h depending on the
+			// install prefix) for the list and documentation of
+			// possible values. Many values listen in lzma_ret
+			// enumeration aren't possible in this example, but
+			// can be made possible by enabling memory usage limit
+			// or adding flags to the decoder initialization.
+			const char *msg;
+			switch (ret) {
+			case LZMA_MEM_ERROR:
+				msg = "Memory allocation failed";
+				break;
+
+			case LZMA_FORMAT_ERROR:
+				// .xz magic bytes weren't found.
+				msg = "The input is not in the .xz format";
+				break;
+
+			case LZMA_OPTIONS_ERROR:
+				// For example, the headers specify a filter
+				// that isn't supported by this liblzma
+				// version (or it hasn't been enabled when
+				// building liblzma, but no-one sane does
+				// that unless building liblzma for an
+				// embedded system). Upgrading to a newer
+				// liblzma might help.
+				//
+				// Note that it is unlikely that the file has
+				// accidentally became corrupt if you get this
+				// error. The integrity of the .xz headers is
+				// always verified with a CRC32, so
+				// unintentionally corrupt files can be
+				// distinguished from unsupported files.
+				msg = "Unsupported compression options";
+				break;
+
+			case LZMA_DATA_ERROR:
+				msg = "Compressed file is corrupt";
+				break;
+
+			case LZMA_BUF_ERROR:
+				// Typically this error means that a valid
+				// file has got truncated, but it might also
+				// be a damaged part in the file that makes
+				// the decoder think the file is truncated.
+				// If you prefer, you can use the same error
+				// message for this as for LZMA_DATA_ERROR.
+				msg = "Compressed file is truncated or "
+						"otherwise corrupt";
+				break;
+
+			default:
+				// This is most likely LZMA_PROG_ERROR.
+				msg = "Unknown error, possibly a bug";
+				break;
+			}
+
+			fprintf(stderr, "%s: Decoder error: "
+					"%s (error code %u)\n",
+					inname, msg, ret);
+			return false;
+		}
+	}
+}
+
+
+extern int
+main(int argc, char **argv)
+{
+	if (argc <= 1) {
+		fprintf(stderr, "Usage: %s FILES...\n", argv[0]);
+		return EXIT_FAILURE;
+	}
+
+	lzma_stream strm = LZMA_STREAM_INIT;
+
+	bool success = true;
+
+	// Try to decompress all files.
+	for (int i = 1; i < argc; ++i) {
+		if (!init_decoder(&strm)) {
+			// Decoder initialization failed. There's no point
+			// to retry it so we need to exit.
+			success = false;
+			break;
+		}
+
+		FILE *infile = fopen(argv[i], "rb");
+
+		if (infile == NULL) {
+			fprintf(stderr, "%s: Error opening the "
+					"input file: %s\n",
+					argv[i], strerror(errno));
+			success = false;
+		} else {
+			success &= decompress(&strm, argv[i], infile, stdout);
+			fclose(infile);
+		}
+	}
+
+	// Free the memory allocated for the decoder. This only needs to be
+	// done after the last file.
+	lzma_end(&strm);
+
+	if (fclose(stdout)) {
+		fprintf(stderr, "Write error: %s\n", strerror(errno));
+		success = false;
+	}
+
+	return success ? EXIT_SUCCESS : EXIT_FAILURE;
+}

doc/examples/03_compress_custom.c

@@ -0,0 +1,193 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file       03_compress_custom.c
+/// \brief      Compress in multi-call mode using x86 BCJ and LZMA2
+///
+/// Usage:      ./03_compress_custom < INFILE > OUTFILE
+///
+/// Example:    ./03_compress_custom < foo > foo.xz
+//
+//  Author:     Lasse Collin
+//
+//  This file has been put into the public domain.
+//  You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#include <stdbool.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <lzma.h>
+
+
+static bool
+init_encoder(lzma_stream *strm)
+{
+	// Use the default preset (6) for LZMA2.
+	//
+	// The lzma_options_lzma structure and the lzma_lzma_preset() function
+	// are declared in lzma/lzma.h (src/liblzma/api/lzma/lzma.h in the
+	// source package or e.g. /usr/include/lzma/lzma.h depending on
+	// the install prefix).
+	lzma_options_lzma opt_lzma2;
+	if (lzma_lzma_preset(&opt_lzma2, LZMA_PRESET_DEFAULT)) {
+		// It should never fail because the default preset
+		// (and presets 0-9 optionally with LZMA_PRESET_EXTREME)
+		// are supported by all stable liblzma versions.
+		//
+		// (The encoder initialization later in this function may
+		// still fail due to unsupported preset *if* the features
+		// required by the preset have been disabled at build time,
+		// but no-one does such things except on embedded systems.)
+		fprintf(stderr, "Unsupported preset, possibly a bug\n");
+		return false;
+	}
+
+	// Now we could customize the LZMA2 options if we wanted. For example,
+	// we could set the the dictionary size (opt_lzma2.dict_size) to
+	// something else than the default (8 MiB) of the default preset.
+	// See lzma/lzma.h for details of all LZMA2 options.
+	//
+	// The x86 BCJ filter will try to modify the x86 instruction stream so
+	// that LZMA2 can compress it better. The x86 BCJ filter doesn't need
+	// any options so it will be set to NULL below.
+	//
+	// Construct the filter chain. The uncompressed data goes first to
+	// the first filter in the array, in this case the x86 BCJ filter.
+	// The array is always terminated by setting .id = LZMA_VLI_UNKNOWN.
+	//
+	// See lzma/filter.h for more information about the lzma_filter
+	// structure.
+	lzma_filter filters[] = {
+		{ .id = LZMA_FILTER_X86, .options = NULL },
+		{ .id = LZMA_FILTER_LZMA2, .options = &opt_lzma2 },
+		{ .id = LZMA_VLI_UNKNOWN, .options = NULL },
+	};
+
+	// Initialize the encoder using the custom filter chain.
+	lzma_ret ret = lzma_stream_encoder(strm, filters, LZMA_CHECK_CRC64);
+
+	if (ret == LZMA_OK)
+		return true;
+
+	const char *msg;
+	switch (ret) {
+	case LZMA_MEM_ERROR:
+		msg = "Memory allocation failed";
+		break;
+
+	case LZMA_OPTIONS_ERROR:
+		// We are no longer using a plain preset so this error
+		// message has been edited accordingly compared to
+		// 01_compress_easy.c.
+		msg = "Specified filter chain is not supported";
+		break;
+
+	case LZMA_UNSUPPORTED_CHECK:
+		msg = "Specified integrity check is not supported";
+		break;
+
+	default:
+		msg = "Unknown error, possibly a bug";
+		break;
+	}
+
+	fprintf(stderr, "Error initializing the encoder: %s (error code %u)\n",
+			msg, ret);
+	return false;
+}
+
+
+// This function is identical to the one in 01_compress_easy.c.
+static bool
+compress(lzma_stream *strm, FILE *infile, FILE *outfile)
+{
+	lzma_action action = LZMA_RUN;
+
+	uint8_t inbuf[BUFSIZ];
+	uint8_t outbuf[BUFSIZ];
+
+	strm->next_in = NULL;
+	strm->avail_in = 0;
+	strm->next_out = outbuf;
+	strm->avail_out = sizeof(outbuf);
+
+	while (true) {
+		if (strm->avail_in == 0 && !feof(infile)) {
+			strm->next_in = inbuf;
+			strm->avail_in = fread(inbuf, 1, sizeof(inbuf),
+					infile);
+
+			if (ferror(infile)) {
+				fprintf(stderr, "Read error: %s\n",
+						strerror(errno));
+				return false;
+			}
+
+			if (feof(infile))
+				action = LZMA_FINISH;
+		}
+
+		lzma_ret ret = lzma_code(strm, action);
+
+		if (strm->avail_out == 0 || ret == LZMA_STREAM_END) {
+			size_t write_size = sizeof(outbuf) - strm->avail_out;
+
+			if (fwrite(outbuf, 1, write_size, outfile)
+					!= write_size) {
+				fprintf(stderr, "Write error: %s\n",
+						strerror(errno));
+				return false;
+			}
+
+			strm->next_out = outbuf;
+			strm->avail_out = sizeof(outbuf);
+		}
+
+		if (ret != LZMA_OK) {
+			if (ret == LZMA_STREAM_END)
+				return true;
+
+			const char *msg;
+			switch (ret) {
+			case LZMA_MEM_ERROR:
+				msg = "Memory allocation failed";
+				break;
+
+			case LZMA_DATA_ERROR:
+				msg = "File size limits exceeded";
+				break;
+
+			default:
+				msg = "Unknown error, possibly a bug";
+				break;
+			}
+
+			fprintf(stderr, "Encoder error: %s (error code %u)\n",
+					msg, ret);
+			return false;
+		}
+	}
+}
+
+
+extern int
+main(void)
+{
+	lzma_stream strm = LZMA_STREAM_INIT;
+
+	bool success = init_encoder(&strm);
+	if (success)
+		success = compress(&strm, stdin, stdout);
+
+	lzma_end(&strm);
+
+	if (fclose(stdout)) {
+		fprintf(stderr, "Write error: %s\n", strerror(errno));
+		success = false;
+	}
+
+	return success ? EXIT_SUCCESS : EXIT_FAILURE;
+}

doc/examples/Makefile

@@ -0,0 +1,23 @@
+#
+# Author: Lasse Collin
+#
+# This file has been put into the public domain.
+# You can do whatever you want with this file.
+#
+
+CC = c99
+CFLAGS = -g
+LDFLAGS = -llzma
+
+PROGS = \
+	01_compress_easy \
+	02_decompress \
+	03_compress_custom
+
+all: $(PROGS)
+
+.c:
+	$(CC) $(CFLAGS) -o $@ $< $(LDFLAGS)
+
+clean:
+	-rm -f $(PROGS)

doc/examples_old/xz_pipe_decomp.c

@@ -1,7 +1,7 @@
 /*
  * xz_pipe_decomp.c
  * A simple example of pipe-only xz decompressor implementation.
- * version: 2010-07-12 - by Daniel Mealha Cabrita
+ * version: 2012-06-14 - by Daniel Mealha Cabrita
  * Not copyrighted -- provided to the public domain.
  *
  * Compiling:
@@ -101,6 +101,14 @@ int xz_decompress (FILE *in_file, FILE *out_file)
 		} while (strm.avail_out == 0);
 	}
 
+	/* Bug fix (2012-06-14): If no errors were detected, check
+	   that the last lzma_code() call returned LZMA_STREAM_END.
+	   If not, the file is probably truncated. */
+	if ((ret == RET_OK) && (ret_xz != LZMA_STREAM_END)) {
+		fprintf (stderr, "Input truncated or corrupt\n");
+		ret = RET_ERROR_DECOMPRESSION;
+	}
+
 	lzma_end (&strm);
 	return ret;
 }

doc/faq.txt

@@ -26,7 +26,7 @@ Q:  There are many LZMA related projects. How does XZ Utils relate to them?
 A:  7-Zip and LZMA SDK are the original projects. LZMA SDK is roughly
     a subset of the 7-Zip source tree.
 
-    p7zip is 7-Zip's command line tools ported to POSIX-like systems.
+    p7zip is 7-Zip's command-line tools ported to POSIX-like systems.
 
     LZMA Utils provide a gzip-like lzma tool for POSIX-like systems.
     LZMA Utils are based on LZMA SDK. XZ Utils are the successor to
@@ -42,7 +42,7 @@ Q:  Why is liblzma named liblzma if its primary file format is .xz?
 A:  When the designing of the .xz format began, the idea was to replace
     the .lzma format and use the same .lzma suffix. It would have been
     quite OK to reuse the suffix when there were very few .lzma files
-    around. However, the old .lzma format become popular before the
+    around. However, the old .lzma format became popular before the
     new format was finished. The new format was renamed to .xz but the
     name of liblzma wasn't changed.
 
@@ -73,7 +73,7 @@ A:  For now, no. Since XZ Utils supports the .lzma format, it's usually
 
     Technically, there is a way to make the conversion relatively fast
     (roughly twice the time that normal decompression takes). Writing
-    such a tool would take quite a bit time though, and would probably
+    such a tool would take quite a bit of time though, and would probably
     be useful to only a few people. If you really want such a conversion
     tool, contact Lasse Collin and offer some money.
 
@@ -84,7 +84,7 @@ Q:  I have installed xz, but my tar doesn't recognize .tar.xz files.
 A:  xz -dc foo.tar.xz | tar xf -
 
 
-Q:  Can I recover parts of a broken .xz file (e.g. corrupted CD-R)?
+Q:  Can I recover parts of a broken .xz file (e.g. a corrupted CD-R)?
 
 A:  It may be possible if the file consists of multiple blocks, which
     typically is not the case if the file was created in single-threaded
@@ -94,7 +94,7 @@ A:  It may be possible if the file consists of multiple blocks, which
 Q:  Is (some part of) XZ Utils patented?
 
 A:  Lasse Collin is not aware of any patents that could affect XZ Utils.
-    However, due to nature of software patents, it's not possible to
+    However, due to the nature of software patents, it's not possible to
     guarantee that XZ Utils isn't affected by any third party patent(s).
 
 
@@ -105,8 +105,8 @@ A:  The .xz format is documented in xz-file-format.txt. It is a container
     filters.
 
     Documenting LZMA and LZMA2 is planned, but for now, there is no other
-    documentation that the source code. Before you begin, you should know
-    the basics of LZ77 and range coding algorithms. LZMA is based on LZ77,
+    documentation than the source code. Before you begin, you should know
+    the basics of LZ77 and range-coding algorithms. LZMA is based on LZ77,
     but LZMA is a lot more complex. Range coding is used to compress
     the final bitstream like Huffman coding is used in Deflate.
 
@@ -148,7 +148,7 @@ A:  See the documentation in XZ Embedded. In short, something like
 
         xz --check=crc32 --powerpc --lzma2=preset=6e,dict=64KiB
 
-    Adjust dictionary size to get a good compromise between
+    Adjust the dictionary size to get a good compromise between
     compression ratio and decompressor memory usage. Note that
     in single-call decompression mode of XZ Embedded, a big
     dictionary doesn't increase memory usage.
@@ -184,10 +184,10 @@ A:  It is planned and has been taken into account when designing
     The third method is pigz-style threading (I use that name, because
     pigz <http://www.zlib.net/pigz/> uses that method). It doesn't
     affect compression ratio significantly and scales to many cores.
-    The memory usage scales linearly when threads are added. It isn't
-    significant with pigz, because Deflate uses only 32 KiB dictionary,
+    The memory usage scales linearly when threads are added. This isn't
+    significant with pigz, because Deflate uses only a 32 KiB dictionary,
     but with LZMA2 the memory usage will increase dramatically just like
-    with the independent blocks method. There is also a constant
+    with the independent-blocks method. There is also a constant
     computational overhead, which may make pigz-method a bit dull on
     dual-core compared to the parallel match finder method, but with more
     cores the overhead is not a big deal anymore.
@@ -197,7 +197,7 @@ A:  It is planned and has been taken into account when designing
     can cut the memory usage by 50 %.
 
     It is possible that the single-threaded method will be modified to
-    create files indentical to the pigz-style method. We'll see once
+    create files identical to the pigz-style method. We'll see once
     pigz-style threading has been implemented in liblzma.
 
 

doc/history.txt

@@ -4,12 +4,12 @@ History of LZMA Utils and XZ Utils
 
 Tukaani distribution
 
-    In 2005, there was a small group working on Tukaani distribution, which
-    was a Slackware fork. One of the project goals was to fit the distro on
-    a single 700 MiB ISO-9660 image. Using LZMA instead of gzip helped a
-    lot. Roughly speaking, one could fit data that took 1000 MiB in gzipped
-    form into 700 MiB with LZMA. Naturally compression ratio varied across
-    packages, but this was what we got on average.
+    In 2005, there was a small group working on the Tukaani distribution,
+    which was a Slackware fork. One of the project's goals was to fit the
+    distro on a single 700 MiB ISO-9660 image. Using LZMA instead of gzip
+    helped a lot. Roughly speaking, one could fit data that took 1000 MiB
+    in gzipped form into 700 MiB with LZMA. Naturally, the compression
+    ratio varied across packages, but this was what we got on average.
 
     Slackware packages have traditionally had .tgz as the filename suffix,
     which is an abbreviation of .tar.gz. A logical naming for LZMA
@@ -30,13 +30,13 @@ Tukaani distribution
 First steps of LZMA Utils
 
     The first version of LZMA Utils (4.22.0) included a shell script called
-    lzmash. It was wrapper that had gzip-like command line interface. It
+    lzmash. It was a wrapper that had a gzip-like command-line interface. It
     used the LZMA_Alone tool from LZMA SDK to do all the real work. zgrep,
-    zdiff, and related scripts from gzip were adapted work with LZMA and
+    zdiff, and related scripts from gzip were adapted to work with LZMA and
     were part of the first LZMA Utils release too.
 
     LZMA Utils 4.22.0 included also lzmadec, which was a small (less than
-    10 KiB) decoder-only command line tool. It was written on top of the
+    10 KiB) decoder-only command-line tool. It was written on top of the
     decoder-only C code found from the LZMA SDK. lzmadec was convenient in
     situations where LZMA_Alone (a few hundred KiB) would be too big.
 
@@ -48,33 +48,34 @@ Second generation
     The lzmash script was an ugly and not very secure hack. The last
     version of LZMA Utils to use lzmash was 4.27.1.
 
-    LZMA Utils 4.32.0beta1 introduced a new lzma command line tool written
+    LZMA Utils 4.32.0beta1 introduced a new lzma command-line tool written
     by Ville Koskinen. It was written in C++, and used the encoder and
-    decoder from C++ LZMA SDK with little modifications. This tool replaced
-    both the lzmash script and the LZMA_Alone command line tool in LZMA
-    Utils.
+    decoder from C++ LZMA SDK with some little modifications. This tool
+    replaced both the lzmash script and the LZMA_Alone command-line tool
+    in LZMA Utils.
 
     Introducing this new tool caused some temporary incompatibilities,
-    because LZMA_Alone executable was simply named lzma like the new
-    command line tool, but they had completely different command line
+    because the LZMA_Alone executable was simply named lzma like the new
+    command-line tool, but they had a completely different command-line
     interface. The file format was still the same.
 
     Lasse wrote liblzmadec, which was a small decoder-only library based
-    on the C code found from LZMA SDK. liblzmadec had API similar to zlib,
-    although there were some significant differences, which made it
+    on the C code found from LZMA SDK. liblzmadec had an API similar to
+    zlib, although there were some significant differences, which made it
     non-trivial to use it in some applications designed for zlib and
     libbzip2.
 
-    The lzmadec command line tool was converted to use liblzmadec.
+    The lzmadec command-line tool was converted to use liblzmadec.
 
-    Alexandre Sauvé helped converting build system to use GNU Autotools.
-    This made is easier to test for certain less portable features needed
-    by the new command line tool.
+    Alexandre Sauvé helped converting the build system to use GNU
+    Autotools. This made it easier to test for certain less portable
+    features needed by the new command-line tool.
 
-    Since the new command line tool never got completely finished (for
-    example, it didn't support LZMA_OPT environment variable), the intent
-    was to not call 4.32.x stable. Similarly, liblzmadec wasn't polished,
-    but appeared to work well enough, so some people started using it too.
+    Since the new command-line tool never got completely finished (for
+    example, it didn't support the LZMA_OPT environment variable), the
+    intent was to not call 4.32.x stable. Similarly, liblzmadec wasn't
+    polished, but appeared to work well enough, so some people started
+    using it too.
 
     Because the development of the third generation of LZMA Utils was
     delayed considerably (3-4 years), the 4.32.x branch had to be kept
@@ -85,16 +86,16 @@ Second generation
 
 File format problems
 
-    The file format used by LZMA_Alone was primitive. It was designed for
-    embedded systems in mind, and thus provided only minimal set of
-    features. The two biggest problems for non-embedded use were lack of
-    magic bytes and integrity check.
+    The file format used by LZMA_Alone was primitive. It was designed with
+    embedded systems in mind, and thus provided only a minimal set of
+    features. The two biggest problems for non-embedded use were the lack
+    of magic bytes and an integrity check.
 
     Igor and Lasse started developing a new file format with some help
     from Ville Koskinen. Also Mark Adler, Mikko Pouru, H. Peter Anvin,
     and Lars Wirzenius helped with some minor things at some point of the
     development. Designing the new format took quite a long time (actually,
-    too long time would be more appropriate expression). It was mostly
+    too long a time would be a more appropriate expression). It was mostly
     because Lasse was quite slow at getting things done due to personal
     reasons.
 
@@ -102,7 +103,7 @@ File format problems
     that was already used by the old file format. Switching to the new
     format wouldn't have caused much trouble when the old format wasn't
     used by many people. But since the development of the new format took
-    so long time, the old format got quite popular, and it was decided
+    such a long time, the old format got quite popular, and it was decided
     that the new file format must use a different suffix.
 
     It was decided to use .xz as the suffix of the new file format. The
@@ -125,13 +126,13 @@ Transition to XZ Utils
     The early versions of XZ Utils were called LZMA Utils. The first
     releases were 4.42.0alphas. They dropped the rest of the C++ LZMA SDK.
     The code was still directly based on LZMA SDK but ported to C and
-    converted from callback API to stateful API. Later, Igor Pavlov made
-    C version of the LZMA encoder too; these ports from C++ to C were
-    independent in LZMA SDK and LZMA Utils.
+    converted from a callback API to a stateful API. Later, Igor Pavlov
+    made a C version of the LZMA encoder too; these ports from C++ to C
+    were independent in LZMA SDK and LZMA Utils.
 
     The core of the new LZMA Utils was liblzma, a compression library with
-    zlib-like API. liblzma supported both the old and new file format. The
-    gzip-like lzma command line tool was rewritten to use liblzma.
+    a zlib-like API. liblzma supported both the old and new file format.
+    The gzip-like lzma command-line tool was rewritten to use liblzma.
 
     The new LZMA Utils code base was renamed to XZ Utils when the name
     of the new file format had been decided. The liblzma compression
@@ -139,7 +140,7 @@ Transition to XZ Utils
     caused unnecessary breakage in applications already using the early
     liblzma snapshots.
 
-    The xz command line tool can emulate the gzip-like lzma tool by
+    The xz command-line tool can emulate the gzip-like lzma tool by
     creating appropriate symlinks (e.g. lzma -> xz). Thus, practically
     all scripts using the lzma tool from LZMA Utils will work as is with
     XZ Utils (and will keep using the old .lzma format). Still, the .lzma

doc/lzma-file-format.txt

@@ -40,7 +40,7 @@ The .lzma File Format
 
 0.2. Changes
 
-        Last modified: 2009-05-01 11:15+0300
+        Last modified: 2011-04-12 11:55+0300
 
 
 1. File Format
@@ -161,6 +161,6 @@ The .lzma File Format
         XZ Utils - The next generation of LZMA Utils
         http://tukaani.org/xz/
 
-        The .xz file format - The successor of the the .lzma format
+        The .xz file format - The successor of the .lzma format
         http://tukaani.org/xz/xz-file-format.txt
 

dos/Makefile

@@ -16,7 +16,7 @@ CC = gcc
 STRIP = strip
 CPPFLAGS =
 CFLAGS = -g -Wall -Wextra -Wfatal-errors -march=i386 -mtune=i686 -O2
-LDFLAGS =
+LDFLAGS = -lemu
 
 # NOTE: -fgnu89-inline is needed on DJGPP 2.04 beta and GCC >= 4.3.0
 # because time.h uses GNU-style "extern inline".

m4/acx_pthread.m4

@@ -1,279 +0,0 @@
-##### http://autoconf-archive.cryp.to/acx_pthread.html
-#
-# SYNOPSIS
-#
-#   ACX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]])
-#
-# DESCRIPTION
-#
-#   This macro figures out how to build C programs using POSIX threads.
-#   It sets the PTHREAD_LIBS output variable to the threads library and
-#   linker flags, and the PTHREAD_CFLAGS output variable to any special
-#   C compiler flags that are needed. (The user can also force certain
-#   compiler flags/libs to be tested by setting these environment
-#   variables.)
-#
-#   Also sets PTHREAD_CC to any special C compiler that is needed for
-#   multi-threaded programs (defaults to the value of CC otherwise).
-#   (This is necessary on AIX to use the special cc_r compiler alias.)
-#
-#   NOTE: You are assumed to not only compile your program with these
-#   flags, but also link it with them as well. e.g. you should link
-#   with $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS
-#   $LIBS
-#
-#   If you are only building threads programs, you may wish to use
-#   these variables in your default LIBS, CFLAGS, and CC:
-#
-#          LIBS="$PTHREAD_LIBS $LIBS"
-#          CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
-#          CC="$PTHREAD_CC"
-#
-#   In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute
-#   constant has a nonstandard name, defines PTHREAD_CREATE_JOINABLE to
-#   that name (e.g. PTHREAD_CREATE_UNDETACHED on AIX).
-#
-#   ACTION-IF-FOUND is a list of shell commands to run if a threads
-#   library is found, and ACTION-IF-NOT-FOUND is a list of commands to
-#   run it if it is not found. If ACTION-IF-FOUND is not specified, the
-#   default action will define HAVE_PTHREAD.
-#
-#   Please let the authors know if this macro fails on any platform, or
-#   if you have any other suggestions or comments. This macro was based
-#   on work by SGJ on autoconf scripts for FFTW (http://www.fftw.org/)
-#   (with help from M. Frigo), as well as ac_pthread and hb_pthread
-#   macros posted by Alejandro Forero Cuervo to the autoconf macro
-#   repository. We are also grateful for the helpful feedback of
-#   numerous users.
-#
-# LAST MODIFICATION
-#
-#   2007-07-29
-#
-# COPYLEFT
-#
-#   Copyright (c) 2007 Steven G. Johnson <stevenj@alum.mit.edu>
-#
-#   This program is free software: you can redistribute it and/or
-#   modify it under the terms of the GNU General Public License as
-#   published by the Free Software Foundation, either version 3 of the
-#   License, or (at your option) any later version.
-#
-#   This program is distributed in the hope that it will be useful, but
-#   WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-#   General Public License for more details.
-#
-#   You should have received a copy of the GNU General Public License
-#   along with this program. If not, see
-#   <http://www.gnu.org/licenses/>.
-#
-#   As a special exception, the respective Autoconf Macro's copyright
-#   owner gives unlimited permission to copy, distribute and modify the
-#   configure scripts that are the output of Autoconf when processing
-#   the Macro. You need not follow the terms of the GNU General Public
-#   License when using or distributing such scripts, even though
-#   portions of the text of the Macro appear in them. The GNU General
-#   Public License (GPL) does govern all other use of the material that
-#   constitutes the Autoconf Macro.
-#
-#   This special exception to the GPL applies to versions of the
-#   Autoconf Macro released by the Autoconf Macro Archive. When you
-#   make and distribute a modified version of the Autoconf Macro, you
-#   may extend this special exception to the GPL to apply to your
-#   modified version as well.
-
-AC_DEFUN([ACX_PTHREAD], [
-AC_REQUIRE([AC_CANONICAL_HOST])
-AC_LANG_SAVE
-AC_LANG_C
-acx_pthread_ok=no
-
-# We used to check for pthread.h first, but this fails if pthread.h
-# requires special compiler flags (e.g. on True64 or Sequent).
-# It gets checked for in the link test anyway.
-
-# First of all, check if the user has set any of the PTHREAD_LIBS,
-# etcetera environment variables, and if threads linking works using
-# them:
-if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then
-        save_CFLAGS="$CFLAGS"
-        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
-        save_LIBS="$LIBS"
-        LIBS="$PTHREAD_LIBS $LIBS"
-        AC_MSG_CHECKING([for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS])
-        AC_TRY_LINK_FUNC(pthread_join, acx_pthread_ok=yes)
-        AC_MSG_RESULT($acx_pthread_ok)
-        if test x"$acx_pthread_ok" = xno; then
-                PTHREAD_LIBS=""
-                PTHREAD_CFLAGS=""
-        fi
-        LIBS="$save_LIBS"
-        CFLAGS="$save_CFLAGS"
-fi
-
-# We must check for the threads library under a number of different
-# names; the ordering is very important because some systems
-# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
-# libraries is broken (non-POSIX).
-
-# Create a list of thread flags to try.  Items starting with a "-" are
-# C compiler flags, and other items are library names, except for "none"
-# which indicates that we try without any flags at all, and "pthread-config"
-# which is a program returning the flags for the Pth emulation library.
-
-acx_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
-
-# The ordering *is* (sometimes) important.  Some notes on the
-# individual items follow:
-
-# pthreads: AIX (must check this before -lpthread)
-# none: in case threads are in libc; should be tried before -Kthread and
-#       other compiler flags to prevent continual compiler warnings
-# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
-# -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
-# lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
-# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads)
-# -pthreads: Solaris/gcc
-# -mthreads: Mingw32/gcc, Lynx/gcc
-# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
-#      doesn't hurt to check since this sometimes defines pthreads too;
-#      also defines -D_REENTRANT)
-#      ... -mt is also the pthreads flag for HP/aCC
-# pthread: Linux, etcetera
-# --thread-safe: KAI C++
-# pthread-config: use pthread-config program (for GNU Pth library)
-
-case "${host_cpu}-${host_os}" in
-        *solaris*)
-
-        # On Solaris (at least, for some versions), libc contains stubbed
-        # (non-functional) versions of the pthreads routines, so link-based
-        # tests will erroneously succeed.  (We need to link with -pthreads/-mt/
-        # -lpthread.)  (The stubs are missing pthread_cleanup_push, or rather
-        # a function called by this macro, so we could check for that, but
-        # who knows whether they'll stub that too in a future libc.)  So,
-        # we'll just look for -pthreads and -lpthread first:
-
-        acx_pthread_flags="-pthreads pthread -mt -pthread $acx_pthread_flags"
-        ;;
-esac
-
-if test x"$acx_pthread_ok" = xno; then
-for flag in $acx_pthread_flags; do
-
-        case $flag in
-                none)
-                AC_MSG_CHECKING([whether pthreads work without any flags])
-                ;;
-
-                -*)
-                AC_MSG_CHECKING([whether pthreads work with $flag])
-                PTHREAD_CFLAGS="$flag"
-                ;;
-
-		pthread-config)
-		AC_CHECK_PROG(acx_pthread_config, pthread-config, yes, no)
-		if test x"$acx_pthread_config" = xno; then continue; fi
-		PTHREAD_CFLAGS="`pthread-config --cflags`"
-		PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
-		;;
-
-                *)
-                AC_MSG_CHECKING([for the pthreads library -l$flag])
-                PTHREAD_LIBS="-l$flag"
-                ;;
-        esac
-
-        save_LIBS="$LIBS"
-        save_CFLAGS="$CFLAGS"
-        LIBS="$PTHREAD_LIBS $LIBS"
-        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
-
-        # Check for various functions.  We must include pthread.h,
-        # since some functions may be macros.  (On the Sequent, we
-        # need a special flag -Kthread to make this header compile.)
-        # We check for pthread_join because it is in -lpthread on IRIX
-        # while pthread_create is in libc.  We check for pthread_attr_init
-        # due to DEC craziness with -lpthreads.  We check for
-        # pthread_cleanup_push because it is one of the few pthread
-        # functions on Solaris that doesn't have a non-functional libc stub.
-        # We try pthread_create on general principles.
-        AC_TRY_LINK([#include <pthread.h>],
-                    [pthread_t th; pthread_join(th, 0);
-                     pthread_attr_init(0); pthread_cleanup_push(0, 0);
-                     pthread_create(0,0,0,0); pthread_cleanup_pop(0); ],
-                    [acx_pthread_ok=yes])
-
-        LIBS="$save_LIBS"
-        CFLAGS="$save_CFLAGS"
-
-        AC_MSG_RESULT($acx_pthread_ok)
-        if test "x$acx_pthread_ok" = xyes; then
-                break;
-        fi
-
-        PTHREAD_LIBS=""
-        PTHREAD_CFLAGS=""
-done
-fi
-
-# Various other checks:
-if test "x$acx_pthread_ok" = xyes; then
-        save_LIBS="$LIBS"
-        LIBS="$PTHREAD_LIBS $LIBS"
-        save_CFLAGS="$CFLAGS"
-        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
-
-        # Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
-	AC_MSG_CHECKING([for joinable pthread attribute])
-	attr_name=unknown
-	for attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
-	    AC_TRY_LINK([#include <pthread.h>], [int attr=$attr; return attr;],
-                        [attr_name=$attr; break])
-	done
-        AC_MSG_RESULT($attr_name)
-        if test "$attr_name" != PTHREAD_CREATE_JOINABLE; then
-            AC_DEFINE_UNQUOTED(PTHREAD_CREATE_JOINABLE, $attr_name,
-                               [Define to necessary symbol if this constant
-                                uses a non-standard name on your system.])
-        fi
-
-        AC_MSG_CHECKING([if more special flags are required for pthreads])
-        flag=no
-        case "${host_cpu}-${host_os}" in
-            *-aix* | *-freebsd* | *-darwin*) flag="-D_THREAD_SAFE";;
-            *solaris* | *-osf* | *-hpux*) flag="-D_REENTRANT";;
-        esac
-        AC_MSG_RESULT(${flag})
-        if test "x$flag" != xno; then
-            PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS"
-        fi
-
-        LIBS="$save_LIBS"
-        CFLAGS="$save_CFLAGS"
-
-        # More AIX lossage: must compile with xlc_r or cc_r
-	if test x"$GCC" != xyes; then
-          AC_CHECK_PROGS(PTHREAD_CC, xlc_r cc_r, ${CC})
-        else
-          PTHREAD_CC=$CC
-	fi
-else
-        PTHREAD_CC="$CC"
-fi
-
-AC_SUBST(PTHREAD_LIBS)
-AC_SUBST(PTHREAD_CFLAGS)
-AC_SUBST(PTHREAD_CC)
-
-# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
-if test x"$acx_pthread_ok" = xyes; then
-        ifelse([$1],,AC_DEFINE(HAVE_PTHREAD,1,[Define if you have POSIX threads libraries and header files.]),[$1])
-        :
-else
-        acx_pthread_ok=no
-        $2
-fi
-AC_LANG_RESTORE
-])dnl ACX_PTHREAD

m4/ax_pthread.m4

@@ -0,0 +1,332 @@
+# ===========================================================================
+#        http://www.gnu.org/software/autoconf-archive/ax_pthread.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+#   AX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]])
+#
+# DESCRIPTION
+#
+#   This macro figures out how to build C programs using POSIX threads. It
+#   sets the PTHREAD_LIBS output variable to the threads library and linker
+#   flags, and the PTHREAD_CFLAGS output variable to any special C compiler
+#   flags that are needed. (The user can also force certain compiler
+#   flags/libs to be tested by setting these environment variables.)
+#
+#   Also sets PTHREAD_CC to any special C compiler that is needed for
+#   multi-threaded programs (defaults to the value of CC otherwise). (This
+#   is necessary on AIX to use the special cc_r compiler alias.)
+#
+#   NOTE: You are assumed to not only compile your program with these flags,
+#   but also link it with them as well. e.g. you should link with
+#   $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS $LIBS
+#
+#   If you are only building threads programs, you may wish to use these
+#   variables in your default LIBS, CFLAGS, and CC:
+#
+#     LIBS="$PTHREAD_LIBS $LIBS"
+#     CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+#     CC="$PTHREAD_CC"
+#
+#   In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute constant
+#   has a nonstandard name, defines PTHREAD_CREATE_JOINABLE to that name
+#   (e.g. PTHREAD_CREATE_UNDETACHED on AIX).
+#
+#   Also HAVE_PTHREAD_PRIO_INHERIT is defined if pthread is found and the
+#   PTHREAD_PRIO_INHERIT symbol is defined when compiling with
+#   PTHREAD_CFLAGS.
+#
+#   ACTION-IF-FOUND is a list of shell commands to run if a threads library
+#   is found, and ACTION-IF-NOT-FOUND is a list of commands to run it if it
+#   is not found. If ACTION-IF-FOUND is not specified, the default action
+#   will define HAVE_PTHREAD.
+#
+#   Please let the authors know if this macro fails on any platform, or if
+#   you have any other suggestions or comments. This macro was based on work
+#   by SGJ on autoconf scripts for FFTW (http://www.fftw.org/) (with help
+#   from M. Frigo), as well as ac_pthread and hb_pthread macros posted by
+#   Alejandro Forero Cuervo to the autoconf macro repository. We are also
+#   grateful for the helpful feedback of numerous users.
+#
+#   Updated for Autoconf 2.68 by Daniel Richard G.
+#
+# LICENSE
+#
+#   Copyright (c) 2008 Steven G. Johnson <stevenj@alum.mit.edu>
+#   Copyright (c) 2011 Daniel Richard G. <skunk@iSKUNK.ORG>
+#
+#   This program is free software: you can redistribute it and/or modify it
+#   under the terms of the GNU General Public License as published by the
+#   Free Software Foundation, either version 3 of the License, or (at your
+#   option) any later version.
+#
+#   This program is distributed in the hope that it will be useful, but
+#   WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+#   Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License along
+#   with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+#   As a special exception, the respective Autoconf Macro's copyright owner
+#   gives unlimited permission to copy, distribute and modify the configure
+#   scripts that are the output of Autoconf when processing the Macro. You
+#   need not follow the terms of the GNU General Public License when using
+#   or distributing such scripts, even though portions of the text of the
+#   Macro appear in them. The GNU General Public License (GPL) does govern
+#   all other use of the material that constitutes the Autoconf Macro.
+#
+#   This special exception to the GPL applies to versions of the Autoconf
+#   Macro released by the Autoconf Archive. When you make and distribute a
+#   modified version of the Autoconf Macro, you may extend this special
+#   exception to the GPL to apply to your modified version as well.
+
+#serial 21
+
+AU_ALIAS([ACX_PTHREAD], [AX_PTHREAD])
+AC_DEFUN([AX_PTHREAD], [
+AC_REQUIRE([AC_CANONICAL_HOST])
+AC_LANG_PUSH([C])
+ax_pthread_ok=no
+
+# We used to check for pthread.h first, but this fails if pthread.h
+# requires special compiler flags (e.g. on True64 or Sequent).
+# It gets checked for in the link test anyway.
+
+# First of all, check if the user has set any of the PTHREAD_LIBS,
+# etcetera environment variables, and if threads linking works using
+# them:
+if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then
+        save_CFLAGS="$CFLAGS"
+        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+        save_LIBS="$LIBS"
+        LIBS="$PTHREAD_LIBS $LIBS"
+        AC_MSG_CHECKING([for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS])
+        AC_TRY_LINK_FUNC([pthread_join], [ax_pthread_ok=yes])
+        AC_MSG_RESULT([$ax_pthread_ok])
+        if test x"$ax_pthread_ok" = xno; then
+                PTHREAD_LIBS=""
+                PTHREAD_CFLAGS=""
+        fi
+        LIBS="$save_LIBS"
+        CFLAGS="$save_CFLAGS"
+fi
+
+# We must check for the threads library under a number of different
+# names; the ordering is very important because some systems
+# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
+# libraries is broken (non-POSIX).
+
+# Create a list of thread flags to try.  Items starting with a "-" are
+# C compiler flags, and other items are library names, except for "none"
+# which indicates that we try without any flags at all, and "pthread-config"
+# which is a program returning the flags for the Pth emulation library.
+
+ax_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
+
+# The ordering *is* (sometimes) important.  Some notes on the
+# individual items follow:
+
+# pthreads: AIX (must check this before -lpthread)
+# none: in case threads are in libc; should be tried before -Kthread and
+#       other compiler flags to prevent continual compiler warnings
+# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
+# -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
+# lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
+# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads)
+# -pthreads: Solaris/gcc
+# -mthreads: Mingw32/gcc, Lynx/gcc
+# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
+#      doesn't hurt to check since this sometimes defines pthreads too;
+#      also defines -D_REENTRANT)
+#      ... -mt is also the pthreads flag for HP/aCC
+# pthread: Linux, etcetera
+# --thread-safe: KAI C++
+# pthread-config: use pthread-config program (for GNU Pth library)
+
+case ${host_os} in
+        solaris*)
+
+        # On Solaris (at least, for some versions), libc contains stubbed
+        # (non-functional) versions of the pthreads routines, so link-based
+        # tests will erroneously succeed.  (We need to link with -pthreads/-mt/
+        # -lpthread.)  (The stubs are missing pthread_cleanup_push, or rather
+        # a function called by this macro, so we could check for that, but
+        # who knows whether they'll stub that too in a future libc.)  So,
+        # we'll just look for -pthreads and -lpthread first:
+
+        ax_pthread_flags="-pthreads pthread -mt -pthread $ax_pthread_flags"
+        ;;
+
+        darwin*)
+        ax_pthread_flags="-pthread $ax_pthread_flags"
+        ;;
+esac
+
+# Clang doesn't consider unrecognized options an error unless we specify
+# -Werror. We throw in some extra Clang-specific options to ensure that
+# this doesn't happen for GCC, which also accepts -Werror.
+
+AC_MSG_CHECKING([if compiler needs -Werror to reject unknown flags])
+save_CFLAGS="$CFLAGS"
+ax_pthread_extra_flags="-Werror"
+CFLAGS="$CFLAGS $ax_pthread_extra_flags -Wunknown-warning-option -Wsizeof-array-argument"
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([int foo(void);],[foo()])],
+                  [AC_MSG_RESULT([yes])],
+                  [ax_pthread_extra_flags=
+                   AC_MSG_RESULT([no])])
+CFLAGS="$save_CFLAGS"
+
+if test x"$ax_pthread_ok" = xno; then
+for flag in $ax_pthread_flags; do
+
+        case $flag in
+                none)
+                AC_MSG_CHECKING([whether pthreads work without any flags])
+                ;;
+
+                -*)
+                AC_MSG_CHECKING([whether pthreads work with $flag])
+                PTHREAD_CFLAGS="$flag"
+                ;;
+
+                pthread-config)
+                AC_CHECK_PROG([ax_pthread_config], [pthread-config], [yes], [no])
+                if test x"$ax_pthread_config" = xno; then continue; fi
+                PTHREAD_CFLAGS="`pthread-config --cflags`"
+                PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
+                ;;
+
+                *)
+                AC_MSG_CHECKING([for the pthreads library -l$flag])
+                PTHREAD_LIBS="-l$flag"
+                ;;
+        esac
+
+        save_LIBS="$LIBS"
+        save_CFLAGS="$CFLAGS"
+        LIBS="$PTHREAD_LIBS $LIBS"
+        CFLAGS="$CFLAGS $PTHREAD_CFLAGS $ax_pthread_extra_flags"
+
+        # Check for various functions.  We must include pthread.h,
+        # since some functions may be macros.  (On the Sequent, we
+        # need a special flag -Kthread to make this header compile.)
+        # We check for pthread_join because it is in -lpthread on IRIX
+        # while pthread_create is in libc.  We check for pthread_attr_init
+        # due to DEC craziness with -lpthreads.  We check for
+        # pthread_cleanup_push because it is one of the few pthread
+        # functions on Solaris that doesn't have a non-functional libc stub.
+        # We try pthread_create on general principles.
+        AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <pthread.h>
+                        static void routine(void *a) { a = 0; }
+                        static void *start_routine(void *a) { return a; }],
+                       [pthread_t th; pthread_attr_t attr;
+                        pthread_create(&th, 0, start_routine, 0);
+                        pthread_join(th, 0);
+                        pthread_attr_init(&attr);
+                        pthread_cleanup_push(routine, 0);
+                        pthread_cleanup_pop(0) /* ; */])],
+                [ax_pthread_ok=yes],
+                [])
+
+        LIBS="$save_LIBS"
+        CFLAGS="$save_CFLAGS"
+
+        AC_MSG_RESULT([$ax_pthread_ok])
+        if test "x$ax_pthread_ok" = xyes; then
+                break;
+        fi
+
+        PTHREAD_LIBS=""
+        PTHREAD_CFLAGS=""
+done
+fi
+
+# Various other checks:
+if test "x$ax_pthread_ok" = xyes; then
+        save_LIBS="$LIBS"
+        LIBS="$PTHREAD_LIBS $LIBS"
+        save_CFLAGS="$CFLAGS"
+        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+
+        # Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
+        AC_MSG_CHECKING([for joinable pthread attribute])
+        attr_name=unknown
+        for attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
+            AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <pthread.h>],
+                           [int attr = $attr; return attr /* ; */])],
+                [attr_name=$attr; break],
+                [])
+        done
+        AC_MSG_RESULT([$attr_name])
+        if test "$attr_name" != PTHREAD_CREATE_JOINABLE; then
+            AC_DEFINE_UNQUOTED([PTHREAD_CREATE_JOINABLE], [$attr_name],
+                               [Define to necessary symbol if this constant
+                                uses a non-standard name on your system.])
+        fi
+
+        AC_MSG_CHECKING([if more special flags are required for pthreads])
+        flag=no
+        case ${host_os} in
+            aix* | freebsd* | darwin*) flag="-D_THREAD_SAFE";;
+            osf* | hpux*) flag="-D_REENTRANT";;
+            solaris*)
+            if test "$GCC" = "yes"; then
+                flag="-D_REENTRANT"
+            else
+                # TODO: What about Clang on Solaris?
+                flag="-mt -D_REENTRANT"
+            fi
+            ;;
+        esac
+        AC_MSG_RESULT([$flag])
+        if test "x$flag" != xno; then
+            PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS"
+        fi
+
+        AC_CACHE_CHECK([for PTHREAD_PRIO_INHERIT],
+            [ax_cv_PTHREAD_PRIO_INHERIT], [
+                AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <pthread.h>]],
+                                                [[int i = PTHREAD_PRIO_INHERIT;]])],
+                    [ax_cv_PTHREAD_PRIO_INHERIT=yes],
+                    [ax_cv_PTHREAD_PRIO_INHERIT=no])
+            ])
+        AS_IF([test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes"],
+            [AC_DEFINE([HAVE_PTHREAD_PRIO_INHERIT], [1], [Have PTHREAD_PRIO_INHERIT.])])
+
+        LIBS="$save_LIBS"
+        CFLAGS="$save_CFLAGS"
+
+        # More AIX lossage: compile with *_r variant
+        if test "x$GCC" != xyes; then
+            case $host_os in
+                aix*)
+                AS_CASE(["x/$CC"],
+                  [x*/c89|x*/c89_128|x*/c99|x*/c99_128|x*/cc|x*/cc128|x*/xlc|x*/xlc_v6|x*/xlc128|x*/xlc128_v6],
+                  [#handle absolute path differently from PATH based program lookup
+                   AS_CASE(["x$CC"],
+                     [x/*],
+                     [AS_IF([AS_EXECUTABLE_P([${CC}_r])],[PTHREAD_CC="${CC}_r"])],
+                     [AC_CHECK_PROGS([PTHREAD_CC],[${CC}_r],[$CC])])])
+                ;;
+            esac
+        fi
+fi
+
+test -n "$PTHREAD_CC" || PTHREAD_CC="$CC"
+
+AC_SUBST([PTHREAD_LIBS])
+AC_SUBST([PTHREAD_CFLAGS])
+AC_SUBST([PTHREAD_CC])
+
+# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
+if test x"$ax_pthread_ok" = xyes; then
+        ifelse([$1],,[AC_DEFINE([HAVE_PTHREAD],[1],[Define if you have POSIX threads libraries and header files.])],[$1])
+        :
+else
+        ax_pthread_ok=no
+        $2
+fi
+AC_LANG_POP
+])dnl AX_PTHREAD

m4/tuklib_physmem.m4

@@ -53,7 +53,8 @@ AC_CACHE_CHECK([how to detect the amount of physical memory],
 # a non-compilable text instead of #error to generate an error.
 AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
 #if defined(_WIN32) || defined(__CYGWIN__) || defined(__OS2__) \
-		|| defined(__DJGPP__) || defined(__VMS)
+		|| defined(__DJGPP__) || defined(__VMS) \
+		|| defined(AMIGA) || defined(__AROS__)
 int main(void) { return 0; }
 #else
 compile error

macosx/build.sh

@@ -0,0 +1,113 @@
+#!/bin/sh
+
+###############################################################################
+# Author: Anders F Björklund <afb@users.sourceforge.net>
+#
+# This file has been put into the public domain.
+# You can do whatever you want with this file.
+###############################################################################
+
+mkdir -p Root
+mkdir -p Resources
+
+# Abort immediately if something goes wrong.
+set -e
+
+GCC="gcc-4.2"
+SDK="/Developer/SDKs/MacOSX10.5.sdk"
+MDT="10.5"
+GTT=i686-apple-darwin9
+
+ARCHES1="-arch ppc -arch ppc64 -arch i386 -arch x86_64"
+ARCHES2="-arch ppc -arch i386"
+PKGFORMAT="10.5" # xar
+
+# avoid "unknown required load command: 0x80000022" from linking on Snow Leopard
+uname -r | grep ^1 >/dev/null && LDFLAGS="$LDFLAGS -Wl,-no_compact_linkedit"
+
+# Clean up if it was already configured.
+[ -f Makefile ] && make distclean
+
+# Build the regular fat program
+
+CC="$GCC" \
+CFLAGS="-O2 -g $ARCHES1 -isysroot $SDK -mmacosx-version-min=$MDT" \
+../configure --disable-dependency-tracking --disable-xzdec --disable-lzmadec $GTT
+
+make
+
+make check
+
+make DESTDIR=`pwd`/Root install
+
+make distclean
+
+# Build the size-optimized program
+
+CC="$GCC" \
+CFLAGS="-Os -g $ARCHES2 -isysroot $SDK -mmacosx-version-min=$MDT" \
+../configure --disable-dependency-tracking --disable-shared --disable-nls --disable-encoders --enable-small --disable-threads $GTT
+
+make -C src/liblzma
+make -C src/xzdec
+make -C src/xzdec DESTDIR=`pwd`/Root install
+
+cp -a ../extra Root/usr/local/share/doc/xz
+
+make distclean
+
+# Move development files to different package
+
+test -d liblzma && rm -r liblzma
+mkdir -p liblzma/usr/local
+
+mv Root/usr/local/include liblzma/usr/local
+mv Root/usr/local/lib liblzma/usr/local
+
+mkdir -p Root/usr/local/lib
+cp -p liblzma/usr/local/lib/liblzma.5.dylib Root/usr/local/lib
+mkdir -p liblzma/usr/local/share/doc/xz
+mv Root/usr/local/share/doc/xz/examples* liblzma/usr/local/share/doc/xz
+
+# Strip debugging symbols and make relocatable
+
+for bin in xz lzmainfo xzdec lzmadec; do
+    strip -S Root/usr/local/bin/$bin
+    install_name_tool -change /usr/local/lib/liblzma.5.dylib @executable_path/../lib/liblzma.5.dylib Root/usr/local/bin/$bin
+done
+
+for lib in liblzma.5.dylib; do
+    strip -S Root/usr/local/lib/$lib
+    install_name_tool -id @executable_path/../lib/liblzma.5.dylib Root/usr/local/lib/$lib
+done
+
+# Create tarball, but without the HFS+ attrib
+
+rmdir debug lib po src/liblzma/api src/liblzma src/lzmainfo src/scripts src/xz src/xzdec src tests
+
+( cd Root/usr/local; COPY_EXTENDED_ATTRIBUTES_DISABLE=true COPYFILE_DISABLE=true tar cvjf ../../../XZ.tbz * )
+( cd liblzma; COPY_EXTENDED_ATTRIBUTES_DISABLE=true COPYFILE_DISABLE=true tar cvjf ../liblzma.tbz ./usr/local )
+
+# Include documentation files for package
+
+cp -p ../README Resources/ReadMe.txt
+cp -p ../COPYING Resources/License.txt
+
+# Make an Installer.app package
+
+ID="org.tukaani.xz"
+VERSION=`cd ..; sh build-aux/version.sh`
+PACKAGEMAKER=/Developer/Applications/Utilities/PackageMaker.app/Contents/MacOS/PackageMaker
+$PACKAGEMAKER -r Root/usr/local -l /usr/local -e Resources -i $ID -n $VERSION -t XZ -o XZ.pkg -g $PKGFORMAT --verbose
+$PACKAGEMAKER -r liblzma -w -k -i $ID.liblzma -n $VERSION -o liblzma.pkg -g $PKGFORMAT --verbose
+
+# Put the package in a disk image
+
+if [ "$PKGFORMAT" != "10.5" ]; then
+hdiutil create -fs HFS+ -format UDZO -quiet -srcfolder XZ.pkg -ov XZ.dmg
+hdiutil internet-enable -yes -quiet XZ.dmg
+fi
+
+echo
+echo "Build completed successfully."
+echo

po/LINGUAS

@@ -1,3 +1,5 @@
 cs
 de
+fr
 it
+pl

po/de.po

@@ -1,14 +1,14 @@
 # XZ Utils German translation
 # This file is put in the public domain.
-# Andre Noll <maan@systemlinux.org>, 2010.
+# Andre Noll <maan@tuebingen.mpg.de>, 2010.
 #
 msgid ""
 msgstr ""
 "Project-Id-Version: XZ Utils 4.999.9beta\n"
 "Report-Msgid-Bugs-To: lasse.collin@tukaani.org\n"
-"POT-Creation-Date: 2010-09-11 17:07+0200\n"
+"POT-Creation-Date: 2012-05-29 17:20+0200\n"
 "PO-Revision-Date: 2010-09-07 20:27+0200\n"
-"Last-Translator:  <maan@systemlinux.org>\n"
+"Last-Translator:  <maan@tuebingen.mpg.de>\n"
 "Language-Team: German\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -96,7 +96,7 @@ msgid "%s: File seems to have been moved, not removing"
 msgstr ""
 "%s: Datei scheint umbenannt worden zu sein, daher wird sie nicht gelöscht"
 
-#: src/xz/file_io.c:144 src/xz/file_io.c:590
+#: src/xz/file_io.c:144 src/xz/file_io.c:589
 #, c-format
 msgid "%s: Cannot remove: %s"
 msgstr "%s: Kann nicht löschen: %s"
@@ -126,59 +126,59 @@ msgstr "%s: Überspringe symbolischen Verweis"
 msgid "%s: Is a directory, skipping"
 msgstr "%s: Überspringe Verzeichnis"
 
-#: src/xz/file_io.c:462
+#: src/xz/file_io.c:461
 #, c-format
 msgid "%s: Not a regular file, skipping"
 msgstr "%s: Keine reguläre Datei, überspringe"
 
-#: src/xz/file_io.c:479
+#: src/xz/file_io.c:478
 #, c-format
 msgid "%s: File has setuid or setgid bit set, skipping"
 msgstr "%s: Datei hat das setuid oder setgid Bit gesetzt, überspringe"
 
-#: src/xz/file_io.c:486
+#: src/xz/file_io.c:485
 #, c-format
 msgid "%s: File has sticky bit set, skipping"
 msgstr "%s: Datei hat sticky Bit gesetzt, überspringe"
 
-#: src/xz/file_io.c:493
+#: src/xz/file_io.c:492
 #, c-format
 msgid "%s: Input file has more than one hard link, skipping"
 msgstr "%s: Eingabedatei hat mehr als einen hard link, überspringe"
 
-#: src/xz/file_io.c:714
+#: src/xz/file_io.c:713
 #, c-format
 msgid "Error restoring the O_APPEND flag to standard output: %s"
 msgstr ""
 "Fehler beim Wiederherstellen des O_APPEND flags bei Standard Output: %s"
 
-#: src/xz/file_io.c:726
+#: src/xz/file_io.c:725
 #, c-format
 msgid "%s: Closing the file failed: %s"
-msgstr "%s: Fehler beim Schießen der Datei: %s"
+msgstr "%s: Fehler beim Schließen der Datei: %s"
 
-#: src/xz/file_io.c:762 src/xz/file_io.c:946
+#: src/xz/file_io.c:761 src/xz/file_io.c:945
 #, c-format
 msgid "%s: Seeking failed when trying to create a sparse file: %s"
 msgstr ""
 "%s: Positionierungsfehler beim Versuch eine sparse Datei zu erzeugen: %s"
 
-#: src/xz/file_io.c:821
+#: src/xz/file_io.c:820
 #, c-format
 msgid "%s: Read error: %s"
 msgstr "%s: Lesefehler: %s"
 
-#: src/xz/file_io.c:844
+#: src/xz/file_io.c:843
 #, c-format
 msgid "%s: Error seeking the file: %s"
 msgstr "%s: Fehler beim Lesen der Dateinamen: %s"
 
-#: src/xz/file_io.c:854
+#: src/xz/file_io.c:853
 #, c-format
 msgid "%s: Unexpected end of file"
 msgstr "%s: Unerwartetes Ende der Datei"
 
-#: src/xz/file_io.c:904
+#: src/xz/file_io.c:903
 #, c-format
 msgid "%s: Write error: %s"
 msgstr "%s: Schreibfehler: %s"
@@ -212,7 +212,7 @@ msgstr "Kein"
 #. but the Check ID is known (here 2). This and other "Unknown-N"
 #. strings are used in tables, so the width must not exceed ten
 #. columns with a fixed-width font. It's OK to omit the dash if
-#. you need space for one extra letter.
+#. you need space for one extra letter, but don't use spaces.
 #: src/xz/list.c:69
 msgid "Unknown-2"
 msgstr "Unbek.2"
@@ -275,41 +275,41 @@ msgstr "%s: Zu klein um ein gültiges .xz file zu sein"
 #. to Ratio, the columns are right aligned. Check and Filename
 #. are left aligned. If you need longer words, it's OK to
 #. use two lines here. Test with "xz -l foo.xz".
-#: src/xz/list.c:612
+#: src/xz/list.c:603
 msgid "Strms  Blocks   Compressed Uncompressed  Ratio  Check   Filename"
 msgstr " Str.  Blöcke       Kompr.     Unkompr.  Verh.  Check   Dateiname"
 
-#: src/xz/list.c:652
+#: src/xz/list.c:643
 #, c-format
 msgid "  Streams:            %s\n"
 msgstr "  Ströme:              %s\n"
 
-#: src/xz/list.c:654
+#: src/xz/list.c:645
 #, c-format
 msgid "  Blocks:             %s\n"
 msgstr "  Blöcke:              %s\n"
 
-#: src/xz/list.c:656
+#: src/xz/list.c:647
 #, c-format
 msgid "  Compressed size:    %s\n"
 msgstr "  Größe komprimiert:   %s\n"
 
-#: src/xz/list.c:659
+#: src/xz/list.c:650
 #, c-format
 msgid "  Uncompressed size:  %s\n"
 msgstr "  Größe unkomprimiert: %s\n"
 
-#: src/xz/list.c:662
+#: src/xz/list.c:653
 #, c-format
 msgid "  Ratio:              %s\n"
 msgstr "  Verhältnis:          %s\n"
 
-#: src/xz/list.c:664
+#: src/xz/list.c:655
 #, c-format
 msgid "  Check:              %s\n"
 msgstr "  Check:               %s\n"
 
-#: src/xz/list.c:665
+#: src/xz/list.c:656
 #, c-format
 msgid "  Stream padding:     %s\n"
 msgstr "  Strom Auffüllung:    %s\n"
@@ -317,7 +317,7 @@ msgstr "  Strom Auffüllung:    %s\n"
 #. TRANSLATORS: The second line is column headings. All except
 #. Check are right aligned; Check is left aligned. Test with
 #. "xz -lv foo.xz".
-#: src/xz/list.c:693
+#: src/xz/list.c:684
 msgid ""
 "  Streams:\n"
 "    Stream    Blocks      CompOffset    UncompOffset        CompSize      "
@@ -329,7 +329,7 @@ msgstr ""
 
 #. TRANSLATORS: The second line is column headings. All
 #. except Check are right aligned; Check is left aligned.
-#: src/xz/list.c:748
+#: src/xz/list.c:739
 #, c-format
 msgid ""
 "  Blocks:\n"
@@ -347,53 +347,53 @@ msgstr ""
 #. are right aligned. %*s is replaced with 0-120
 #. spaces to make the CheckVal column wide enough.
 #. Test with "xz -lvv foo.xz".
-#: src/xz/list.c:760
+#: src/xz/list.c:751
 #, c-format
 msgid "      CheckVal %*s Header  Flags        CompSize    MemUsage  Filters"
 msgstr "      CheckWert %*s  Kopf  Schalter    KompGröße    Speicher  Filter"
 
-#: src/xz/list.c:838 src/xz/list.c:1007
+#: src/xz/list.c:829 src/xz/list.c:998
 #, c-format
 msgid "  Memory needed:      %s MiB\n"
 msgstr "  Benötigter Speicher: %s MiB\n"
 
-#: src/xz/list.c:840 src/xz/list.c:1009
+#: src/xz/list.c:831 src/xz/list.c:1000
 #, c-format
 msgid "  Sizes in headers:   %s\n"
 msgstr "  Größe in Köpfen:     %s\n"
 
-#: src/xz/list.c:841 src/xz/list.c:1010
+#: src/xz/list.c:832 src/xz/list.c:1001
 msgid "Yes"
 msgstr "Ja"
 
-#: src/xz/list.c:841 src/xz/list.c:1010
+#: src/xz/list.c:832 src/xz/list.c:1001
 msgid "No"
 msgstr "Nein"
 
 #. TRANSLATORS: %s is an integer. Only the plural form of this
 #. message is used (e.g. "2 files"). Test with "xz -l foo.xz bar.xz".
-#: src/xz/list.c:986
+#: src/xz/list.c:977
 #, c-format
 msgid "%s file\n"
 msgid_plural "%s files\n"
 msgstr[0] "%s Datei\n"
 msgstr[1] "%s Dateien\n"
 
-#: src/xz/list.c:999
+#: src/xz/list.c:990
 msgid "Totals:"
 msgstr "Gesamt:"
 
-#: src/xz/list.c:1000
+#: src/xz/list.c:991
 #, c-format
 msgid "  Number of files:    %s\n"
 msgstr "   Anzahl Dateien:     %s\n"
 
-#: src/xz/list.c:1072
+#: src/xz/list.c:1063
 msgid "--list works only on .xz files (--format=xz or --format=auto)"
 msgstr ""
 "--list funktioniert nur mit .xz Dateien (--format=xz oder --format=auto)"
 
-#: src/xz/list.c:1078
+#: src/xz/list.c:1069
 msgid "--list does not support reading from standard input"
 msgstr "--list unterstützt kein Lesen der Standardeingabe"
 
@@ -428,60 +428,73 @@ msgstr ""
 "Lesen der Standardeingabe ist nicht möglich, wenn die Dateinamen auch von "
 "der Standardeingabe gelesen werden"
 
-#: src/xz/message.c:800 src/xz/message.c:844
+#. TRANSLATORS: This is the program name in the beginning
+#. of the line in messages. Usually it becomes "xz: ".
+#. This is a translatable string because French needs
+#. a space before a colon.
+#: src/xz/message.c:733
+#, c-format
+msgid "%s: "
+msgstr ""
+
+#: src/xz/message.c:796 src/xz/message.c:846
 msgid "Internal error (bug)"
 msgstr "Interner Fehler (Bug)"
 
-#: src/xz/message.c:807
+#: src/xz/message.c:803
 msgid "Cannot establish signal handlers"
 msgstr "Kann Signal Routine nicht setzen"
 
-#: src/xz/message.c:816
+#: src/xz/message.c:812
 msgid "No integrity check; not verifying file integrity"
 msgstr "Kein Integritäts-Check; werde Datei-Integrität nicht überprüfen"
 
-#: src/xz/message.c:819
+#: src/xz/message.c:815
 msgid "Unsupported type of integrity check; not verifying file integrity"
 msgstr ""
 "Typ des Integritäts-Checks nicht unterstützt; werde Datei-Integrität nicht "
 "überprüfen"
 
-#: src/xz/message.c:826
+#: src/xz/message.c:822
 msgid "Memory usage limit reached"
 msgstr "Speicher-Limit erreicht"
 
-#: src/xz/message.c:829
+#: src/xz/message.c:825
 msgid "File format not recognized"
 msgstr "Datei Format nicht erkannt"
 
-#: src/xz/message.c:832
+#: src/xz/message.c:828
 msgid "Unsupported options"
 msgstr "Optionen nicht unterstützt"
 
-#: src/xz/message.c:835
+#: src/xz/message.c:831
 msgid "Compressed data is corrupt"
 msgstr "Komprimierte Daten sind korrupt"
 
-#: src/xz/message.c:838
+#: src/xz/message.c:834
 msgid "Unexpected end of input"
 msgstr "Unerwartetes Eingabe Ende"
 
-#: src/xz/message.c:886
+#: src/xz/message.c:867
+msgid "%s MiB of memory is required. The limiter is disabled."
+msgstr "%s MiB Speicher wird benötigt. Der Begrenzer ist deaktiviert."
+
+#: src/xz/message.c:895
 #, c-format
 msgid "%s MiB of memory is required. The limit is %s."
 msgstr "%s MiB Speicher wird benötigt. Limit ist %s."
 
-#: src/xz/message.c:1053
+#: src/xz/message.c:1062
 #, c-format
 msgid "%s: Filter chain: %s\n"
 msgstr "%s: Filter Kette: %s\n"
 
-#: src/xz/message.c:1063
+#: src/xz/message.c:1072
 #, c-format
 msgid "Try `%s --help' for more information."
 msgstr "Versuchen Sie `%s --help' für mehr Informationen."
 
-#: src/xz/message.c:1089
+#: src/xz/message.c:1098
 #, c-format
 msgid ""
 "Usage: %s [OPTION]... [FILE]...\n"
@@ -492,18 +505,18 @@ msgstr ""
 "Komprimiert oder dekomprimiert .xz DATEI(EN).\n"
 "\n"
 
-#: src/xz/message.c:1096
+#: src/xz/message.c:1105
 msgid ""
 "Mandatory arguments to long options are mandatory for short options too.\n"
 msgstr ""
 "Obligatorische Argumente für lange Optionen sind auch für kurze Optionen\n"
 "zwingend.\n"
 
-#: src/xz/message.c:1100
+#: src/xz/message.c:1109
 msgid " Operation mode:\n"
 msgstr " Operationsmodus:\n"
 
-#: src/xz/message.c:1103
+#: src/xz/message.c:1112
 msgid ""
 "  -z, --compress      force compression\n"
 "  -d, --decompress    force decompression\n"
@@ -515,7 +528,7 @@ msgstr ""
 "  -t, --test            überprüfe Datei Integrität\n"
 "  -l, --list            liste Datei Informationen"
 
-#: src/xz/message.c:1109
+#: src/xz/message.c:1118
 msgid ""
 "\n"
 " Operation modifiers:\n"
@@ -523,7 +536,7 @@ msgstr ""
 "\n"
 " Operationsmodifikatoren:\n"
 
-#: src/xz/message.c:1112
+#: src/xz/message.c:1121
 msgid ""
 "  -k, --keep          keep (don't delete) input files\n"
 "  -f, --force         force overwrite of output file and (de)compress links\n"
@@ -535,7 +548,7 @@ msgstr ""
 "  -c, --stdout          schreibe nach Standard Output und lösche nicht die\n"
 "                        Eingabedateien"
 
-#: src/xz/message.c:1118
+#: src/xz/message.c:1127
 msgid ""
 "      --no-sparse     do not create sparse files when decompressing\n"
 "  -S, --suffix=.SUF   use the suffix `.SUF' on compressed files\n"
@@ -554,7 +567,7 @@ msgstr ""
 "      --files0=[DATEI]  wie --files, aber benutze den Null Charakter als "
 "Trenner"
 
-#: src/xz/message.c:1126
+#: src/xz/message.c:1135
 msgid ""
 "\n"
 " Basic file format and compression options:\n"
@@ -562,7 +575,7 @@ msgstr ""
 "\n"
 " Grundlegende Optionen für Dateiformat und Kompression:\n"
 
-#: src/xz/message.c:1128
+#: src/xz/message.c:1137
 msgid ""
 "  -F, --format=FMT    file format to encode or decode; possible values are\n"
 "                      `auto' (default), `xz', `lzma', and `raw'\n"
@@ -578,7 +591,7 @@ msgstr ""
 "`crc32',\n"
 "                        `crc64' (Voreinstellung), oder `sha256'"
 
-#: src/xz/message.c:1135
+#: src/xz/message.c:1144
 msgid ""
 "  -0 ... -9           compression preset; default is 6; take compressor "
 "*and*\n"
@@ -591,7 +604,7 @@ msgstr ""
 "des\n"
 "                        Dekomprimierers, wenn Sie 7-9 benutzen!"
 
-#: src/xz/message.c:1139
+#: src/xz/message.c:1148
 msgid ""
 "  -e, --extreme       try to improve compression ratio by using more CPU "
 "time;\n"
@@ -602,7 +615,7 @@ msgstr ""
 "                        verhältnis zu verbessern. Das beeinflusst nicht den\n"
 "                        Speicherbedarf des Dekomprimierers."
 
-#: src/xz/message.c:1144
+#: src/xz/message.c:1153
 #, no-c-format
 msgid ""
 "      --memlimit-compress=LIMIT\n"
@@ -619,7 +632,7 @@ msgstr ""
 "RAM,\n"
 "                        oder 0 für Grundeinstellungen."
 
-#: src/xz/message.c:1151
+#: src/xz/message.c:1160
 msgid ""
 "      --no-adjust     if compression settings exceed the memory usage "
 "limit,\n"
@@ -631,7 +644,7 @@ msgstr ""
 "statt\n"
 "                        die Einstellungen nach unten anzupassen."
 
-#: src/xz/message.c:1157
+#: src/xz/message.c:1166
 msgid ""
 "\n"
 " Custom filter chain for compression (alternative for using presets):"
@@ -639,7 +652,7 @@ msgstr ""
 "\n"
 " User-definierte Filter Kette für Kompression (alternativ zu Voreinstellung):"
 
-#: src/xz/message.c:1166
+#: src/xz/message.c:1175
 msgid ""
 "\n"
 "  --lzma1[=OPTS]      LZMA1 or LZMA2; OPTS is a comma-separated list of zero "
@@ -683,7 +696,7 @@ msgstr ""
 "                          depth=NUM  Maximale Suchtiefe; 0=automatisch\n"
 "                                     (Voreinstellung)"
 
-#: src/xz/message.c:1181
+#: src/xz/message.c:1190
 msgid ""
 "\n"
 "  --x86[=OPTS]        x86 BCJ filter (32-bit and 64-bit)\n"
@@ -706,7 +719,7 @@ msgstr ""
 "                          start=NUM  Start-Offset für Konversion\n"
 "                          (Voreinstellung=0)"
 
-#: src/xz/message.c:1193
+#: src/xz/message.c:1202
 msgid ""
 "\n"
 "  --delta[=OPTS]      Delta filter; valid OPTS (valid values; default):\n"
@@ -720,7 +733,7 @@ msgstr ""
 "voneinander\n"
 "                                    subtrahiert werden (1-256; 1)"
 
-#: src/xz/message.c:1201
+#: src/xz/message.c:1210
 msgid ""
 "\n"
 " Other options:\n"
@@ -728,7 +741,7 @@ msgstr ""
 "\n"
 " Andere Optionen:\n"
 
-#: src/xz/message.c:1204
+#: src/xz/message.c:1213
 msgid ""
 "  -q, --quiet         suppress warnings; specify twice to suppress errors "
 "too\n"
@@ -740,25 +753,25 @@ msgstr ""
 "noch\n"
 "                        gesprächiger zu sein"
 
-#: src/xz/message.c:1209
+#: src/xz/message.c:1218
 msgid "  -Q, --no-warn       make warnings not affect the exit status"
 msgstr "  -Q, --no-warn         Warnungen verändern nicht den exit status"
 
-#: src/xz/message.c:1211
+#: src/xz/message.c:1220
 msgid ""
 "      --robot         use machine-parsable messages (useful for scripts)"
 msgstr ""
 "      --robot           benutze Maschinen-lesbare Meldungen (nützlich für\n"
 "                        Skripte)"
 
-#: src/xz/message.c:1214
+#: src/xz/message.c:1223
 msgid ""
 "      --info-memory   display the total amount of RAM and the currently "
 "active\n"
 "                      memory usage limits, and exit"
 msgstr "      --info-memory     zeige Speicherlimit an und terminiere"
 
-#: src/xz/message.c:1217
+#: src/xz/message.c:1226
 msgid ""
 "  -h, --help          display the short help (lists only the basic options)\n"
 "  -H, --long-help     display this long help and exit"
@@ -767,7 +780,7 @@ msgstr ""
 "                        Optionen)\n"
 "  -H, --long-help       zeige diese lange Hilfe an und terminiere"
 
-#: src/xz/message.c:1221
+#: src/xz/message.c:1230
 msgid ""
 "  -h, --help          display this short help and exit\n"
 "  -H, --long-help     display the long help (lists also the advanced options)"
@@ -777,11 +790,11 @@ msgstr ""
 "fortgeschrittene\n"
 "                        Optionen an)"
 
-#: src/xz/message.c:1226
+#: src/xz/message.c:1235
 msgid "  -V, --version       display the version number and exit"
 msgstr "  -V, --version         zeige Versionsnummer an und terminiere"
 
-#: src/xz/message.c:1228
+#: src/xz/message.c:1237
 msgid ""
 "\n"
 "With no FILE, or when FILE is -, read standard input.\n"
@@ -794,15 +807,14 @@ msgstr ""
 #. for this package. Please add _another line_ saying
 #. "Report translation bugs to <...>\n" with the email or WWW
 #. address for translation bugs. Thanks.
-#: src/xz/message.c:1234
+#: src/xz/message.c:1243
 #, c-format
 msgid "Report bugs to <%s> (in English or Finnish).\n"
 msgstr ""
 "Melde Bugs an <%s> (in englisch oder finnisch).\n"
-"Melde Übersetzungsfehler an <maan@systemlinux.org> (in englisch oder "
-"deutsch).\n"
+"Melde Übersetzungsfehler an <maan@tuebingen.mpg.de> (in englisch oder deutsch).\n"
 
-#: src/xz/message.c:1236
+#: src/xz/message.c:1245
 #, c-format
 msgid "%s home page: <%s>\n"
 msgstr "%s Homepage: <%s>\n"
@@ -840,7 +852,7 @@ msgstr ""
 "Der ausgewählte Algorithmus zum Auffinden von Übereinstimmungen braucht "
 "mindestens nice=%<PRIu32>"
 
-#: src/xz/suffix.c:79 src/xz/suffix.c:164
+#: src/xz/suffix.c:101 src/xz/suffix.c:194
 #, c-format
 msgid ""
 "%s: With --format=raw, --suffix=.SUF is required unless writing to stdout"
@@ -848,17 +860,17 @@ msgstr ""
 "%s: Mit --format=raw ist --sufix=.SUF notwendig, falls nicht nach stdout "
 "geschrieben wird"
 
-#: src/xz/suffix.c:99
+#: src/xz/suffix.c:121
 #, c-format
 msgid "%s: Filename has an unknown suffix, skipping"
 msgstr "%s: Dateiname hat unbekannte Endung, überspringe"
 
-#: src/xz/suffix.c:154
+#: src/xz/suffix.c:175 src/xz/suffix.c:184
 #, c-format
 msgid "%s: File already has `%s' suffix, skipping"
 msgstr "%s: Datei hat bereits `%s' Endung, überspringe"
 
-#: src/xz/suffix.c:205
+#: src/xz/suffix.c:235
 #, c-format
 msgid "%s: Invalid filename suffix"
 msgstr "%s: Ungültige Datei Endung"

po/fr.po

@@ -0,0 +1,841 @@
+# XZ Utils French Translation
+# This file is put in the public domain.
+# Adrien Nader <adrien@notk.org>, 2011-2014.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: xz-utils\n"
+"Report-Msgid-Bugs-To: lasse.collin@tukaani.org\n"
+"POT-Creation-Date: 2014-12-20 20:45+0200\n"
+"PO-Revision-Date: 2010-09-24 21;12+0200\n"
+"Last-Translator: Adrien Nader <adrien@notk.org>\n"
+"Language-Team: None\n"
+"Language: fr\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n"
+
+#: src/xz/args.c:333
+#, c-format
+msgid "%s: Unknown file format type"
+msgstr "%s : Format de fichier inconnu"
+
+#: src/xz/args.c:356 src/xz/args.c:364
+#, c-format
+msgid "%s: Unsupported integrity check type"
+msgstr "%s : Type de vérification d'intégrité inconnu"
+
+#: src/xz/args.c:382
+msgid "Only one file can be specified with `--files' or `--files0'."
+msgstr "Un seul fichier peut être spécifié avec `--files' ou `--files0'."
+
+#: src/xz/args.c:445
+#, c-format
+msgid "The environment variable %s contains too many arguments"
+msgstr "La variable d'environnement %s contient trop d'arguments"
+
+#: src/xz/coder.c:99
+msgid "Maximum number of filters is four"
+msgstr "Le nombre maximal de filtres est quatre"
+
+#: src/xz/coder.c:118
+msgid "Memory usage limit is too low for the given filter setup."
+msgstr "La limite d'utilisation mémoire est trop basse pour la configuration de filtres donnée."
+
+#: src/xz/coder.c:139
+msgid "Using a preset in raw mode is discouraged."
+msgstr "Utiliser un préréglage en mode `raw' est déconseillé."
+
+#: src/xz/coder.c:141
+msgid "The exact options of the presets may vary between software versions."
+msgstr "Le détail des préréglages peut varier entre différentes versions du logiciel."
+
+#: src/xz/coder.c:164
+msgid "The .lzma format supports only the LZMA1 filter"
+msgstr "Le format .lzma ne prend en charge que le filtre LZMA1"
+
+#: src/xz/coder.c:172
+msgid "LZMA1 cannot be used with the .xz format"
+msgstr "Le filtre LZMA1 ne peut être utilisé avec le format .xz"
+
+#: src/xz/coder.c:189
+msgid "Unsupported filter chain or filter options"
+msgstr "Enchaînement ou options de filtres non pris en charge"
+
+#: src/xz/coder.c:197
+#, c-format
+msgid "Decompression will need %s MiB of memory."
+msgstr "La décompression nécessitera %s MiB de mémoire."
+
+#: src/xz/coder.c:254
+#, c-format
+msgid "Adjusted LZMA%c dictionary size from %s MiB to %s MiB to not exceed the memory usage limit of %s MiB"
+msgstr "Taille du dictionnaire LZMA%c réduite de %s MiB à %s MiB pour ne pas dépasser la limite d'utilisation mémoire de %s MiB"
+
+#. TRANSLATORS: When compression or decompression finishes,
+#. and xz is going to remove the source file, xz first checks
+#. if the source file still exists, and if it does, does its
+#. device and inode numbers match what xz saw when it opened
+#. the source file. If these checks fail, this message is
+#. shown, %s being the filename, and the file is not deleted.
+#. The check for device and inode numbers is there, because
+#. it is possible that the user has put a new file in place
+#. of the original file, and in that case it obviously
+#. shouldn't be removed.
+#: src/xz/file_io.c:138
+#, c-format
+msgid "%s: File seems to have been moved, not removing"
+msgstr "%s : Le fichier a apparemment été déplacé, suppression annulée"
+
+#: src/xz/file_io.c:145 src/xz/file_io.c:586
+#, c-format
+msgid "%s: Cannot remove: %s"
+msgstr "%s : Impossible de supprimer : %s"
+
+#: src/xz/file_io.c:170
+#, c-format
+msgid "%s: Cannot set the file owner: %s"
+msgstr "%s : Impossible de modifier le propriétaire du fichier : %s"
+
+#: src/xz/file_io.c:176
+#, c-format
+msgid "%s: Cannot set the file group: %s"
+msgstr "%s : Impossible de modifier le groupe propriétaire du fichier : %s"
+
+#: src/xz/file_io.c:195
+#, c-format
+msgid "%s: Cannot set the file permissions: %s"
+msgstr "%s : Impossible de modifier les permissions du fichier : %s"
+
+#: src/xz/file_io.c:338 src/xz/file_io.c:417
+#, c-format
+msgid "%s: Is a symbolic link, skipping"
+msgstr "%s est un lien symbolique : ignoré"
+
+#: src/xz/file_io.c:452
+#, c-format
+msgid "%s: Is a directory, skipping"
+msgstr "%s est un répertoire : ignoré"
+
+#: src/xz/file_io.c:458
+#, c-format
+msgid "%s: Not a regular file, skipping"
+msgstr "%s n'est pas un fichier régulier : ignoré"
+
+#: src/xz/file_io.c:475
+#, c-format
+msgid "%s: File has setuid or setgid bit set, skipping"
+msgstr "%s : Le fichier possède les bits `setuid' ou `setgid' : ignoré"
+
+#: src/xz/file_io.c:482
+#, c-format
+msgid "%s: File has sticky bit set, skipping"
+msgstr "%s : Le fichier possède le bit `sticky' : ignoré"
+
+#: src/xz/file_io.c:489
+#, c-format
+msgid "%s: Input file has more than one hard link, skipping"
+msgstr "%s : Le fichier d'entrée a plus d'un lien matériel : ignoré"
+
+#: src/xz/file_io.c:711
+#, c-format
+msgid "Error restoring the O_APPEND flag to standard output: %s"
+msgstr "Impossible de rétablir le drapeau O_APPEND sur la sortie standard : %s"
+
+#: src/xz/file_io.c:723
+#, c-format
+msgid "%s: Closing the file failed: %s"
+msgstr "%s : Impossible de fermer le fichier : %s"
+
+#: src/xz/file_io.c:759 src/xz/file_io.c:943
+#, c-format
+msgid "%s: Seeking failed when trying to create a sparse file: %s"
+msgstr "%s : Impossible de se déplacer dans le fichier pour créer un 'sparse file' : %s"
+
+#: src/xz/file_io.c:818
+#, c-format
+msgid "%s: Read error: %s"
+msgstr "%s : Erreur d'écriture : %s"
+
+#: src/xz/file_io.c:841
+#, c-format
+msgid "%s: Error seeking the file: %s"
+msgstr "%s : Impossible de se déplacer dans le fichier : %s"
+
+#: src/xz/file_io.c:851
+#, c-format
+msgid "%s: Unexpected end of file"
+msgstr "%s : Fin de fichier inattendue"
+
+#: src/xz/file_io.c:901
+#, c-format
+msgid "%s: Write error: %s"
+msgstr "%s : Erreur d'écriture : %s"
+
+#: src/xz/hardware.c:100
+msgid "Disabled"
+msgstr "Désactivé"
+
+#. TRANSLATORS: Test with "xz --info-memory" to see if
+#. the alignment looks nice.
+#: src/xz/hardware.c:119
+msgid "Total amount of physical memory (RAM): "
+msgstr "Quantité totale de mémoire physique (RAM) :  "
+
+#: src/xz/hardware.c:121
+msgid "Memory usage limit for compression:    "
+msgstr "Limite d'utilisation pour la compression :   "
+
+#: src/xz/hardware.c:123
+msgid "Memory usage limit for decompression:  "
+msgstr "Limite d'utilisation pour la décompression : "
+
+#. TRANSLATORS: Indicates that there is no integrity check.
+#. This string is used in tables, so the width must not
+#. exceed ten columns with a fixed-width font.
+#: src/xz/list.c:62
+msgid "None"
+msgstr "Aucune"
+
+#. TRANSLATORS: Indicates that integrity check name is not known,
+#. but the Check ID is known (here 2). This and other "Unknown-N"
+#. strings are used in tables, so the width must not exceed ten
+#. columns with a fixed-width font. It's OK to omit the dash if
+#. you need space for one extra letter, but don't use spaces.
+#: src/xz/list.c:69
+msgid "Unknown-2"
+msgstr "Inconnue-2"
+
+#: src/xz/list.c:70
+msgid "Unknown-3"
+msgstr "Inconnue-3"
+
+#: src/xz/list.c:72
+msgid "Unknown-5"
+msgstr "Inconnue-5"
+
+#: src/xz/list.c:73
+msgid "Unknown-6"
+msgstr "Inconnue-6"
+
+#: src/xz/list.c:74
+msgid "Unknown-7"
+msgstr "Inconnue-7"
+
+#: src/xz/list.c:75
+msgid "Unknown-8"
+msgstr "Inconnue-8"
+
+#: src/xz/list.c:76
+msgid "Unknown-9"
+msgstr "Inconnue-9"
+
+#: src/xz/list.c:78
+msgid "Unknown-11"
+msgstr "Inconnue-11"
+
+#: src/xz/list.c:79
+msgid "Unknown-12"
+msgstr "Inconnue-12"
+
+#: src/xz/list.c:80
+msgid "Unknown-13"
+msgstr "Inconnue-13"
+
+#: src/xz/list.c:81
+msgid "Unknown-14"
+msgstr "Inconnue-14"
+
+#: src/xz/list.c:82
+msgid "Unknown-15"
+msgstr "Inconnue-15"
+
+#: src/xz/list.c:126
+#, c-format
+msgid "%s: File is empty"
+msgstr "%s : Le fichier est vide"
+
+#: src/xz/list.c:131
+#, c-format
+msgid "%s: Too small to be a valid .xz file"
+msgstr "%s : Trop petit pour être un fichier xz valide."
+
+#. TRANSLATORS: These are column headings. From Strms (Streams)
+#. to Ratio, the columns are right aligned. Check and Filename
+#. are left aligned. If you need longer words, it's OK to
+#. use two lines here. Test with "xz -l foo.xz".
+#: src/xz/list.c:629
+msgid "Strms  Blocks   Compressed Uncompressed  Ratio  Check   Filename"
+msgstr "Flux    Blocs    Compressé  Décompressé  Ratio  Vérif.  Nom de fichier"
+
+#: src/xz/list.c:669
+#, c-format
+msgid "  Streams:            %s\n"
+msgstr "  Flux :                            %s\n"
+
+#: src/xz/list.c:671
+#, c-format
+msgid "  Blocks:             %s\n"
+msgstr "  Blocs :                           %s\n"
+
+#: src/xz/list.c:673
+#, c-format
+msgid "  Compressed size:    %s\n"
+msgstr "  Taille données avec compression : %s\n"
+
+#: src/xz/list.c:676
+#, c-format
+msgid "  Uncompressed size:  %s\n"
+msgstr "  Taille données sans compression : %s\n"
+
+#: src/xz/list.c:679
+#, c-format
+msgid "  Ratio:              %s\n"
+msgstr "  Ratio :                           %s\n"
+
+#: src/xz/list.c:681
+#, c-format
+msgid "  Check:              %s\n"
+msgstr "  Vérification :                    %s\n"
+
+#: src/xz/list.c:682
+#, c-format
+msgid "  Stream padding:     %s\n"
+msgstr "  Octets de rembourrage du flux :   %s\n"
+
+#. TRANSLATORS: The second line is column headings. All except
+#. Check are right aligned; Check is left aligned. Test with
+#. "xz -lv foo.xz".
+#: src/xz/list.c:710
+msgid ""
+"  Streams:\n"
+"    Stream    Blocks      CompOffset    UncompOffset        CompSize      UncompSize  Ratio  Check      Padding"
+msgstr ""
+"  Flux :\n"
+"      Flux     Blocs    PositionComp  PositionDécomp      TailleComp    TailleDécomp  Ratio  Vérif.    Bourrage"
+
+#. TRANSLATORS: The second line is column headings. All
+#. except Check are right aligned; Check is left aligned.
+#: src/xz/list.c:765
+#, c-format
+msgid ""
+"  Blocks:\n"
+"    Stream     Block      CompOffset    UncompOffset       TotalSize      UncompSize  Ratio  Check"
+msgstr ""
+"  Blocs :\n"
+"      Flux      Bloc    PositionComp  PositionDécomp       TailleTot    TailleDécomp  Ratio  Vérif."
+
+#. TRANSLATORS: These are additional column headings
+#. for the most verbose listing mode. CheckVal
+#. (Check value), Flags, and Filters are left aligned.
+#. Header (Block Header Size), CompSize, and MemUsage
+#. are right aligned. %*s is replaced with 0-120
+#. spaces to make the CheckVal column wide enough.
+#. Test with "xz -lvv foo.xz".
+#: src/xz/list.c:777
+#, c-format
+msgid "      CheckVal %*s Header  Flags        CompSize    MemUsage  Filters"
+msgstr "     ValVérif %*sEn-tête  Drapeaux   TailleComp     UtilMém  Filtres"
+
+#: src/xz/list.c:855 src/xz/list.c:1024
+#, c-format
+msgid "  Memory needed:      %s MiB\n"
+msgstr "  Mémoire nécessaire :              %s MiB\n"
+
+#: src/xz/list.c:857 src/xz/list.c:1026
+#, c-format
+msgid "  Sizes in headers:   %s\n"
+msgstr "  Tailles stockées dans l'en-tête : %s\n"
+
+#: src/xz/list.c:858 src/xz/list.c:1027
+msgid "Yes"
+msgstr "Oui"
+
+#: src/xz/list.c:858 src/xz/list.c:1027
+msgid "No"
+msgstr "Non"
+
+#. TRANSLATORS: %s is an integer. Only the plural form of this
+#. message is used (e.g. "2 files"). Test with "xz -l foo.xz bar.xz".
+#: src/xz/list.c:1003
+#, c-format
+msgid "%s file\n"
+msgid_plural "%s files\n"
+msgstr[0] "%s fichier\n"
+msgstr[1] "%s fichiers\n"
+
+#: src/xz/list.c:1016
+msgid "Totals:"
+msgstr "Totaux :"
+
+#: src/xz/list.c:1017
+#, c-format
+msgid "  Number of files:    %s\n"
+msgstr "  Nombre de fichiers : %s\n"
+
+#: src/xz/list.c:1089
+msgid "--list works only on .xz files (--format=xz or --format=auto)"
+msgstr "--list ne marche que sur les fichiers .xz (--format=xz ou --format=auto)"
+
+#: src/xz/list.c:1095
+msgid "--list does not support reading from standard input"
+msgstr "--list est incompatible avec la lecture sur l'entrée standard"
+
+#: src/xz/main.c:89
+#, c-format
+msgid "%s: Error reading filenames: %s"
+msgstr "%s : Erreur lors de la lecture des noms de fichiers : %s"
+
+#: src/xz/main.c:96
+#, c-format
+msgid "%s: Unexpected end of input when reading filenames"
+msgstr "%s : Fin des données inattendue lors de la lecture des noms de fichiers"
+
+#: src/xz/main.c:120
+#, c-format
+msgid "%s: Null character found when reading filenames; maybe you meant to use `--files0' instead of `--files'?"
+msgstr "%s : Caractère NULL détecté lors de la lecture des noms de fichiers ; peut-être pensiez-vous à `--files0' plutot qu'a `--files' ?"
+
+#: src/xz/main.c:174
+msgid "Compression and decompression with --robot are not supported yet."
+msgstr "La compression et la décompression ne marchent pas encore avec --robot."
+
+#: src/xz/main.c:231
+msgid "Cannot read data from standard input when reading filenames from standard input"
+msgstr "Impossible de lire à la fois les données et les noms de fichiers depuis l'entrée standard"
+
+#. TRANSLATORS: This is the program name in the beginning
+#. of the line in messages. Usually it becomes "xz: ".
+#. This is a translatable string because French needs
+#. a space before a colon.
+#: src/xz/message.c:733
+#, c-format
+msgid "%s: "
+msgstr "%s : "
+
+#: src/xz/message.c:796 src/xz/message.c:846
+msgid "Internal error (bug)"
+msgstr "Erreur interne (bug)"
+
+#: src/xz/message.c:803
+msgid "Cannot establish signal handlers"
+msgstr "Impossible d'installer le gestionnaire de signaux"
+
+#: src/xz/message.c:812
+msgid "No integrity check; not verifying file integrity"
+msgstr "Pas de données de vérification d'intégrité ; vérification non effectuée"
+
+#: src/xz/message.c:815
+msgid "Unsupported type of integrity check; not verifying file integrity"
+msgstr "Méthode de vérification d'intégrité non prise en charge ; vérification non effectuée"
+
+#: src/xz/message.c:822
+msgid "Memory usage limit reached"
+msgstr "Limite d'utilisation mémoire atteinte"
+
+#: src/xz/message.c:825
+msgid "File format not recognized"
+msgstr "Format de fichier inconnu"
+
+#: src/xz/message.c:828
+msgid "Unsupported options"
+msgstr "Options non prises en charge"
+
+#: src/xz/message.c:831
+msgid "Compressed data is corrupt"
+msgstr "Les données compressées sont corrompues"
+
+#: src/xz/message.c:834
+msgid "Unexpected end of input"
+msgstr "Fin des données inattendue "
+
+#: src/xz/message.c:867
+#, c-format
+msgid "%s MiB of memory is required. The limiter is disabled."
+msgstr "%s MiB de mémoire sont nécessaires. La limite est désactivée."
+
+#: src/xz/message.c:895
+#, c-format
+msgid "%s MiB of memory is required. The limit is %s."
+msgstr "%s MiB de mémoire sont nécessaires, la limite étant %s."
+
+#: src/xz/message.c:1062
+#, c-format
+msgid "%s: Filter chain: %s\n"
+msgstr "%s : Enchaînement de filtres : %s\n"
+
+#: src/xz/message.c:1072
+#, c-format
+msgid "Try `%s --help' for more information."
+msgstr "Éxécutez `%s --help' pour obtenir davantage d'informations."
+
+#: src/xz/message.c:1098
+#, c-format
+msgid ""
+"Usage: %s [OPTION]... [FILE]...\n"
+"Compress or decompress FILEs in the .xz format.\n"
+"\n"
+msgstr ""
+"Utilisation : %s [OPTION]... [FICHIER]...\n"
+"Compresse ou decompresse FICHIER(s) au format .xz.\n"
+"\n"
+
+#: src/xz/message.c:1105
+msgid "Mandatory arguments to long options are mandatory for short options too.\n"
+msgstr ""
+"Les arguments obligatoires pour les options longues le sont aussi pour les\n"
+"options courtes.\n"
+
+#: src/xz/message.c:1109
+msgid " Operation mode:\n"
+msgstr " Mode d'opération :\n"
+
+#: src/xz/message.c:1112
+msgid ""
+"  -z, --compress      force compression\n"
+"  -d, --decompress    force decompression\n"
+"  -t, --test          test compressed file integrity\n"
+"  -l, --list          list information about .xz files"
+msgstr ""
+"  -z, --compress      forcer le mode compression\n"
+"  -d, --decompress    forcer le mode décompression\n"
+"  -t, --test          tester l'intégrité du fichier compressé\n"
+"  -l, --list          lister les informations sur les fichiers .xz"
+
+#: src/xz/message.c:1118
+msgid ""
+"\n"
+" Operation modifiers:\n"
+msgstr ""
+"\n"
+" Modificateurs :\n"
+
+#: src/xz/message.c:1121
+msgid ""
+"  -k, --keep          keep (don't delete) input files\n"
+"  -f, --force         force overwrite of output file and (de)compress links\n"
+"  -c, --stdout        write to standard output and don't delete input files"
+msgstr ""
+"  -k, --keep          ne pas supprimer les fichiers d'entrée\n"
+"  -f, --force         forcer l'écrasement éventuel du fichier de sortie et\n"
+"                      (dé)compresser les liens symboliques\n"
+"  -c, --stdout        écrire sur la sortie standard et ne pas supprimer les\n"
+"                      fichiers d'entrée"
+
+#: src/xz/message.c:1127
+msgid ""
+"      --no-sparse     do not create sparse files when decompressing\n"
+"  -S, --suffix=.SUF   use the suffix `.SUF' on compressed files\n"
+"      --files[=FILE]  read filenames to process from FILE; if FILE is\n"
+"                      omitted, filenames are read from the standard input;\n"
+"                      filenames must be terminated with the newline character\n"
+"      --files0[=FILE] like --files but use the null character as terminator"
+msgstr ""
+"      --no-sparse     ne pas créer de 'sparse file' lors de la décompression\n"
+"  -S, --suffix=.SUF   utiliser le suffixe `.SUF' pour les fichiers compressés\n"
+"      --files[=FILE]  lire les fichiers sur lesquels opérer depuis FILE ; si\n"
+"                      FILE est omis, ceux-ci sont lus depuis l'entrée standard\n"
+"                      et doivent être suivis d'un caractère retour à la ligne\n"
+"      --files0[=FILE] comme --files mais avec un caractère null comme séparateur"
+
+#: src/xz/message.c:1135
+msgid ""
+"\n"
+" Basic file format and compression options:\n"
+msgstr ""
+"\n"
+" Options basiques de format de fichier et de compression :\n"
+
+#: src/xz/message.c:1137
+msgid ""
+"  -F, --format=FMT    file format to encode or decode; possible values are\n"
+"                      `auto' (default), `xz', `lzma', and `raw'\n"
+"  -C, --check=CHECK   integrity check type: `none' (use with caution),\n"
+"                      `crc32', `crc64' (default), or `sha256'"
+msgstr ""
+"  -F, --format=FMT    format du fichier à encoder ou décoder ; sont acceptés :\n"
+"                      `auto' (par défaut), `xz', `lzma' et `raw'\n"
+"  -C, --check=CHECK   type de vérification d'intégrité : `none' (à utiliser avec\n"
+"                      précaution), `crc32', `crc64' (par défaut) ou `sha256'"
+
+#: src/xz/message.c:1144
+msgid ""
+"  -0 ... -9           compression preset; default is 6; take compressor *and*\n"
+"                      decompressor memory usage into account before using 7-9!"
+msgstr ""
+"  -0 ... -9           préréglage de compression : 6 par défaut ; pensez à\n"
+"                      l'utilisation mémoire du compresseur *et* du décompresseur\n"
+"                      avant d'utiliser 7, 8 ou 9 !"
+
+#: src/xz/message.c:1148
+msgid ""
+"  -e, --extreme       try to improve compression ratio by using more CPU time;\n"
+"                      does not affect decompressor memory requirements"
+msgstr ""
+"  -e, --extreme       essayer d'améliorer la compression en utilisant davantage\n"
+"                      de temps processeur ;\n"
+"                      n'affecte pas les besoins mémoire du décompresseur"
+
+#: src/xz/message.c:1153
+#, no-c-format
+msgid ""
+"      --memlimit-compress=LIMIT\n"
+"      --memlimit-decompress=LIMIT\n"
+"  -M, --memlimit=LIMIT\n"
+"                      set memory usage limit for compression, decompression,\n"
+"                      or both; LIMIT is in bytes, % of RAM, or 0 for defaults"
+msgstr ""
+"      --memlimit-compress=LIMIT\n"
+"      --memlimit-decompress=LIMIT\n"
+"  -M, --memlimit=LIMIT\n"
+"                      règle la limite d'utilisation mémoire pour la compression,\n"
+"                      décompression ou les deux ; LIMIT est en octets,\n"
+"                      pourcentage de RAM, ou 0 pour la valeur par défaut"
+
+#: src/xz/message.c:1160
+msgid ""
+"      --no-adjust     if compression settings exceed the memory usage limit,\n"
+"                      give an error instead of adjusting the settings downwards"
+msgstr ""
+"      --no-adjust     si les réglages de compression dépassent la limite\n"
+"                      d'utilisation mémoire, renvoyer une erreur plutôt que de\n"
+"                      diminuer les réglages"
+
+#: src/xz/message.c:1166
+msgid ""
+"\n"
+" Custom filter chain for compression (alternative for using presets):"
+msgstr ""
+"\n"
+" Chaîne de filtres de compression personnalisée (en lieu des préréglages) :"
+
+#: src/xz/message.c:1175
+msgid ""
+"\n"
+"  --lzma1[=OPTS]      LZMA1 or LZMA2; OPTS is a comma-separated list of zero or\n"
+"  --lzma2[=OPTS]      more of the following options (valid values; default):\n"
+"                        preset=PRE reset options to a preset (0-9[e])\n"
+"                        dict=NUM   dictionary size (4KiB - 1536MiB; 8MiB)\n"
+"                        lc=NUM     number of literal context bits (0-4; 3)\n"
+"                        lp=NUM     number of literal position bits (0-4; 0)\n"
+"                        pb=NUM     number of position bits (0-4; 2)\n"
+"                        mode=MODE  compression mode (fast, normal; normal)\n"
+"                        nice=NUM   nice length of a match (2-273; 64)\n"
+"                        mf=NAME    match finder (hc3, hc4, bt2, bt3, bt4; bt4)\n"
+"                        depth=NUM  maximum search depth; 0=automatic (default)"
+msgstr ""
+"\n"
+"  --lzma1[=OPTS]      LZMA1/2 ; OPTS est une liste d'options parmi les suivantes\n"
+"  --lzma2[=OPTS]      (entre parenthèses : valeurs valides et par défaut) :\n"
+"                        preset=PRE remettre les options à un préréglage (0-9[e])\n"
+"                        dict=NUM   taille dictionnaire (4KiB - 1536MiB ; 8MiB)\n"
+"                        lc=NUM     nombre de 'literal context bits' (0-4 ; 3)\n"
+"                        lp=NUM     nombre de 'literal position bits' (0-4 ; 0)\n"
+"                        pb=NUM     nombre de 'position bits' (0-4 ; 2)\n"
+"                        mode=MODE  mode de compression (fast, normal ; normal)\n"
+"                        nice=NUM   nice length of a match (2-273; 64)\n"
+"                        mf=NAME    'match finder' (hc3, hc4, bt2, bt3, bt4; bt4)\n"
+"                        depth=NUM  profondeur de recherche maximale ;\n"
+"                                      0=automatique (par défaut)"
+
+#: src/xz/message.c:1190
+msgid ""
+"\n"
+"  --x86[=OPTS]        x86 BCJ filter (32-bit and 64-bit)\n"
+"  --powerpc[=OPTS]    PowerPC BCJ filter (big endian only)\n"
+"  --ia64[=OPTS]       IA-64 (Itanium) BCJ filter\n"
+"  --arm[=OPTS]        ARM BCJ filter (little endian only)\n"
+"  --armthumb[=OPTS]   ARM-Thumb BCJ filter (little endian only)\n"
+"  --sparc[=OPTS]      SPARC BCJ filter\n"
+"                      Valid OPTS for all BCJ filters:\n"
+"                        start=NUM  start offset for conversions (default=0)"
+msgstr ""
+"\n"
+"  --x86[=OPTS]        filtre BCJ x86 (32-bit et 64-bit)\n"
+"  --powerpc[=OPTS]    filtre BCJ PowerPC ('big endian' uniquement)\n"
+"  --ia64[=OPTS]       filtre BCJ IA-64 (Itanium)\n"
+"  --arm[=OPTS]        filtre BCJ ARM ('little endian' uniquement)\n"
+"  --armthumb[=OPTS]   filtre BCJ ARM-Thumb ('little endian' uniquement)\n"
+"  --sparc[=OPTS]      filtre BCJ SPARC\n"
+"                      OPTS valides pour tous les filtres BCJ :\n"
+"                        start=NUM  position de début de la conversion (défaut=0)"
+
+#: src/xz/message.c:1202
+msgid ""
+"\n"
+"  --delta[=OPTS]      Delta filter; valid OPTS (valid values; default):\n"
+"                        dist=NUM   distance between bytes being subtracted\n"
+"                                   from each other (1-256; 1)"
+msgstr ""
+"\n"
+"  --delta[=OPTS]      Filtre delta ; OPTS valides (vals. valides ; par défaut) :\n"
+"                        dist=NUM   distance entre les octets soustraits les\n"
+"                                   uns aux autres (1-256 ; 1)"
+
+#: src/xz/message.c:1210
+msgid ""
+"\n"
+" Other options:\n"
+msgstr ""
+"\n"
+" Autres options :\n"
+
+#: src/xz/message.c:1213
+msgid ""
+"  -q, --quiet         suppress warnings; specify twice to suppress errors too\n"
+"  -v, --verbose       be verbose; specify twice for even more verbose"
+msgstr ""
+"  -q, --quiet         masquer les avertissements ; spécifier deux fois pour\n"
+"                      aussi masquer les erreurs\n"
+"  -v, --verbose       être bavard ; spécifier deux fois pour l'être davantage"
+
+#: src/xz/message.c:1218
+msgid "  -Q, --no-warn       make warnings not affect the exit status"
+msgstr "  -Q, --no-warn       les avertissements ne modifient pas le code de sortie"
+
+#: src/xz/message.c:1220
+msgid "      --robot         use machine-parsable messages (useful for scripts)"
+msgstr ""
+"      --robot         utiliser des messages lisibles par un programme\n"
+"                      (utile pour les scripts)"
+
+#: src/xz/message.c:1223
+msgid ""
+"      --info-memory   display the total amount of RAM and the currently active\n"
+"                      memory usage limits, and exit"
+msgstr ""
+"      --info-memory   afficher la quantité totale de RAM ainsi que la limite\n"
+"                      actuelle d'utilisation mémoire puis quitter"
+
+#: src/xz/message.c:1226
+msgid ""
+"  -h, --help          display the short help (lists only the basic options)\n"
+"  -H, --long-help     display this long help and exit"
+msgstr ""
+"  -h, --help          afficher l'aide courte (ne liste que les options de base)\n"
+"  -H, --long-help     afficher l'aide longue (ceci) puis quitter"
+
+#: src/xz/message.c:1230
+msgid ""
+"  -h, --help          display this short help and exit\n"
+"  -H, --long-help     display the long help (lists also the advanced options)"
+msgstr ""
+"  -h, --help          afficher l'aide courte (ceci) puis quitter\n"
+"  -H, --long-help     afficher l'aide longue (liste aussi les options avancées)"
+
+#: src/xz/message.c:1235
+msgid "  -V, --version       display the version number and exit"
+msgstr "  -V, --version       afficher le numéro de version puis quitter"
+
+#: src/xz/message.c:1237
+msgid ""
+"\n"
+"With no FILE, or when FILE is -, read standard input.\n"
+msgstr ""
+"\n"
+"Sans FILE ou quand FILE est -, lire l'entrée standard.\n"
+
+#. TRANSLATORS: This message indicates the bug reporting address
+#. for this package. Please add _another line_ saying
+#. "Report translation bugs to <...>\n" with the email or WWW
+#. address for translation bugs. Thanks.
+#: src/xz/message.c:1243
+#, c-format
+msgid "Report bugs to <%s> (in English or Finnish).\n"
+msgstr ""
+"Signaler les bogues à <%s> (en anglais ou en finlandais).\n"
+"Signaler les bogues de traduction à <adrien@notk.org>.\n"
+
+#: src/xz/message.c:1245
+#, c-format
+msgid "%s home page: <%s>\n"
+msgstr "Page du projet %s : <%s>\n"
+
+#: src/xz/options.c:86
+#, c-format
+msgid "%s: Options must be `name=value' pairs separated with commas"
+msgstr "%s: Les options doivent être des paires `nom=valeur' séparées par des virgules"
+
+#: src/xz/options.c:93
+#, c-format
+msgid "%s: Invalid option name"
+msgstr "%s : Nom d'option invalide"
+
+#: src/xz/options.c:113
+#, c-format
+msgid "%s: Invalid option value"
+msgstr "%s : Valeur d'option invalide"
+
+#: src/xz/options.c:247
+#, c-format
+msgid "Unsupported LZMA1/LZMA2 preset: %s"
+msgstr "Préréglage LZMA1/LZMA2 non reconnu : %s"
+
+#: src/xz/options.c:355
+msgid "The sum of lc and lp must not exceed 4"
+msgstr "La somme de lc et lp ne doit pas dépasser 4"
+
+#: src/xz/options.c:359
+#, c-format
+msgid "The selected match finder requires at least nice=%<PRIu32>"
+msgstr "Le `match finder' choisi nécessite au moins nice=%<PRIu32>"
+
+#: src/xz/suffix.c:101 src/xz/suffix.c:194
+#, c-format
+msgid "%s: With --format=raw, --suffix=.SUF is required unless writing to stdout"
+msgstr "%s : Avec --format=raw, --suffix=.SUF est nécessaire sauf lors de l'écriture vers stdout"
+
+#: src/xz/suffix.c:121
+#, c-format
+msgid "%s: Filename has an unknown suffix, skipping"
+msgstr "%s : Le fichier a un suffixe inconnu, ignoré"
+
+#: src/xz/suffix.c:175 src/xz/suffix.c:184
+#, c-format
+msgid "%s: File already has `%s' suffix, skipping"
+msgstr "%s : Le fichier a déjà le suffixe '%s', ignoré"
+
+#: src/xz/suffix.c:235
+#, c-format
+msgid "%s: Invalid filename suffix"
+msgstr "%s: Suffixe de nom de fichier invalide"
+
+#: src/xz/util.c:71
+#, c-format
+msgid "%s: Value is not a non-negative decimal integer"
+msgstr "%s : La valeur n'est pas un entier décimal non négatif"
+
+#: src/xz/util.c:113
+#, c-format
+msgid "%s: Invalid multiplier suffix"
+msgstr "%s : Suffixe multiplicateur invalide"
+
+#: src/xz/util.c:115
+msgid "Valid suffixes are `KiB' (2^10), `MiB' (2^20), and `GiB' (2^30)."
+msgstr "Les suffixes valides sont 'KiB' (2^10), 'MiB' (2^20) et 'GiB' (2^30)."
+
+#: src/xz/util.c:132
+#, c-format
+msgid "Value of the option `%s' must be in the range [%<PRIu64>, %<PRIu64>]"
+msgstr "La valeur de l'option '%s' doit être inclue entre %<PRIu64> et %<PRIu64>"
+
+#: src/xz/util.c:257
+msgid "Empty filename, skipping"
+msgstr "Nom de fichier vide, ignoré"
+
+#: src/xz/util.c:271
+msgid "Compressed data cannot be read from a terminal"
+msgstr "Les données compressées ne peuvent pas être lues depuis un terminal"
+
+#: src/xz/util.c:284
+msgid "Compressed data cannot be written to a terminal"
+msgstr "Les données compressées ne peuvent pas être écrites dans un terminal"
+
+#: src/common/tuklib_exit.c:39
+msgid "Writing to standard output failed"
+msgstr "Impossible d'écrire vers la sortie standard"
+
+#: src/common/tuklib_exit.c:42
+msgid "Unknown error"
+msgstr "Erreur inconnue"

po/it.po

@@ -2,26 +2,28 @@
 # This file is in the public domain
 # Gruppo traduzione italiano di Ubuntu-it <gruppo-traduzione@ubuntu-it.org>, 2009, 2010
 # Lorenzo De Liso <blackz@ubuntu.com>, 2010.
-# Milo Casagrande <milo@ubuntu.com>, 2009, 2010.
+# Milo Casagrande <milo@ubuntu.com>, 2009, 2010, 2011, 2012.
+#
 msgid ""
 msgstr ""
 "Project-Id-Version: xz-utils\n"
 "Report-Msgid-Bugs-To: lasse.collin@tukaani.org\n"
-"POT-Creation-Date: 2010-09-10 14:50+0300\n"
-"PO-Revision-Date: 2010-09-16 21:32+0200\n"
+"POT-Creation-Date: 2012-05-29 13:50+0300\n"
+"PO-Revision-Date: 2012-05-31 09:57+0800\n"
 "Last-Translator: Milo Casagrande <milo@ubuntu.com>\n"
 "Language-Team: Italian <tp@lists.linux.it>\n"
+"Language: it\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
+"Content-Transfer-Encoding: 8-bit\n"
 "X-Launchpad-Export-Date: 2010-08-16 19:16+0000\n"
 "X-Generator: Launchpad (build Unknown)\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"Plural-Forms: nplurals=2; plural=(n!=1);\n"
 
 #: src/xz/args.c:333
 #, c-format
 msgid "%s: Unknown file format type"
-msgstr "%s: tipo di formato del file sconosciutoN"
+msgstr "%s: tipo di formato del file sconosciuto"
 
 #: src/xz/args.c:356 src/xz/args.c:364
 #, c-format
@@ -97,7 +99,7 @@ msgstr ""
 msgid "%s: File seems to have been moved, not removing"
 msgstr "%s: sembra che il file sia stato spostato, non viene rimosso"
 
-#: src/xz/file_io.c:144 src/xz/file_io.c:590
+#: src/xz/file_io.c:144 src/xz/file_io.c:589
 #, c-format
 msgid "%s: Cannot remove: %s"
 msgstr "%s: impossibile rimuovere: %s"
@@ -127,58 +129,58 @@ msgstr "%s: è un collegamento simbolico, viene saltato"
 msgid "%s: Is a directory, skipping"
 msgstr "%s: è una directory, viene saltata"
 
-#: src/xz/file_io.c:462
+#: src/xz/file_io.c:461
 #, c-format
 msgid "%s: Not a regular file, skipping"
 msgstr "%s: non è un file regolare, viene saltato"
 
-#: src/xz/file_io.c:479
+#: src/xz/file_io.c:478
 #, c-format
 msgid "%s: File has setuid or setgid bit set, skipping"
 msgstr "%s: il file ha il bit setuid o setgid impostato, viene saltato"
 
-#: src/xz/file_io.c:486
+#: src/xz/file_io.c:485
 #, c-format
 msgid "%s: File has sticky bit set, skipping"
 msgstr "%s: il file ha lo sticky bit impostato, viene saltato"
 
-#: src/xz/file_io.c:493
+#: src/xz/file_io.c:492
 #, c-format
 msgid "%s: Input file has more than one hard link, skipping"
 msgstr "%s: il file di input ha più di un collegamento fisico, viene saltato"
 
-#: src/xz/file_io.c:714
+#: src/xz/file_io.c:713
 #, c-format
 msgid "Error restoring the O_APPEND flag to standard output: %s"
 msgstr "Errore nel ripristinare la flag O_APPEND sullo standard output: %s"
 
-#: src/xz/file_io.c:726
+#: src/xz/file_io.c:725
 #, c-format
 msgid "%s: Closing the file failed: %s"
 msgstr "%s: chiusura del file non riuscita: %s"
 
-#: src/xz/file_io.c:762 src/xz/file_io.c:946
+#: src/xz/file_io.c:761 src/xz/file_io.c:945
 #, c-format
 msgid "%s: Seeking failed when trying to create a sparse file: %s"
 msgstr ""
 "%s: posizionamento non riuscito nel tentativo di creare un file sparso: %s"
 
-#: src/xz/file_io.c:821
+#: src/xz/file_io.c:820
 #, c-format
 msgid "%s: Read error: %s"
 msgstr "%s: errore di lettura: %s"
 
-#: src/xz/file_io.c:844
+#: src/xz/file_io.c:843
 #, c-format
 msgid "%s: Error seeking the file: %s"
 msgstr "%s: errore nel cercare il file: %s"
 
-#: src/xz/file_io.c:854
+#: src/xz/file_io.c:853
 #, c-format
 msgid "%s: Unexpected end of file"
 msgstr "%s: fine del file inaspettata"
 
-#: src/xz/file_io.c:904
+#: src/xz/file_io.c:903
 #, c-format
 msgid "%s: Write error: %s"
 msgstr "%s: errore di scrittura: %s"
@@ -212,7 +214,7 @@ msgstr "Nessuno"
 #. but the Check ID is known (here 2). This and other "Unknown-N"
 #. strings are used in tables, so the width must not exceed ten
 #. columns with a fixed-width font. It's OK to omit the dash if
-#. you need space for one extra letter.
+#. you need space for one extra letter, but don't use spaces.
 #: src/xz/list.c:69
 msgid "Unknown-2"
 msgstr "Sconosc2"
@@ -275,41 +277,41 @@ msgstr "%s: troppo piccolo per essere un file .xz valido"
 #. to Ratio, the columns are right aligned. Check and Filename
 #. are left aligned. If you need longer words, it's OK to
 #. use two lines here. Test with "xz -l foo.xz".
-#: src/xz/list.c:612
+#: src/xz/list.c:603
 msgid "Strms  Blocks   Compressed Uncompressed  Ratio  Check   Filename"
 msgstr " Strm  Blocc.    Compresso     Estratto  Rapp.  Contr   Nome file"
 
-#: src/xz/list.c:652
+#: src/xz/list.c:643
 #, c-format
 msgid "  Streams:            %s\n"
 msgstr "  Stream:               %s\n"
 
-#: src/xz/list.c:654
+#: src/xz/list.c:645
 #, c-format
 msgid "  Blocks:             %s\n"
 msgstr "  Blocchi:              %s\n"
 
-#: src/xz/list.c:656
+#: src/xz/list.c:647
 #, c-format
 msgid "  Compressed size:    %s\n"
 msgstr "  Dim. compresso:       %s\n"
 
-#: src/xz/list.c:659
+#: src/xz/list.c:650
 #, c-format
 msgid "  Uncompressed size:  %s\n"
 msgstr "  Dim. estratto:        %s\n"
 
-#: src/xz/list.c:662
+#: src/xz/list.c:653
 #, c-format
 msgid "  Ratio:              %s\n"
 msgstr "  Rapporto:             %s\n"
 
-#: src/xz/list.c:664
+#: src/xz/list.c:655
 #, c-format
 msgid "  Check:              %s\n"
 msgstr "  Controllo:            %s\n"
 
-#: src/xz/list.c:665
+#: src/xz/list.c:656
 #, c-format
 msgid "  Stream padding:     %s\n"
 msgstr "  Padding dello stream: %s\n"
@@ -317,7 +319,7 @@ msgstr "  Padding dello stream: %s\n"
 #. TRANSLATORS: The second line is column headings. All except
 #. Check are right aligned; Check is left aligned. Test with
 #. "xz -lv foo.xz".
-#: src/xz/list.c:693
+#: src/xz/list.c:684
 msgid ""
 "  Streams:\n"
 "    Stream    Blocks      CompOffset    UncompOffset        CompSize      "
@@ -329,7 +331,7 @@ msgstr ""
 
 #. TRANSLATORS: The second line is column headings. All
 #. except Check are right aligned; Check is left aligned.
-#: src/xz/list.c:748
+#: src/xz/list.c:739
 #, c-format
 msgid ""
 "  Blocks:\n"
@@ -347,52 +349,52 @@ msgstr ""
 #. are right aligned. %*s is replaced with 0-120
 #. spaces to make the CheckVal column wide enough.
 #. Test with "xz -lvv foo.xz".
-#: src/xz/list.c:760
+#: src/xz/list.c:751
 #, c-format
 msgid "      CheckVal %*s Header  Flags        CompSize    MemUsage  Filters"
 msgstr "      Val.cont %*s Header  Flag       Dim.compr.    Uso mem.  Filtri"
 
-#: src/xz/list.c:838 src/xz/list.c:1007
+#: src/xz/list.c:829 src/xz/list.c:998
 #, c-format
 msgid "  Memory needed:      %s MiB\n"
 msgstr "  Memoria necessaria:   %s MiB\n"
 
-#: src/xz/list.c:840 src/xz/list.c:1009
+#: src/xz/list.c:831 src/xz/list.c:1000
 #, c-format
 msgid "  Sizes in headers:   %s\n"
 msgstr "  Dim. negli header:    %s\n"
 
-#: src/xz/list.c:841 src/xz/list.c:1010
+#: src/xz/list.c:832 src/xz/list.c:1001
 msgid "Yes"
 msgstr "Sì"
 
-#: src/xz/list.c:841 src/xz/list.c:1010
+#: src/xz/list.c:832 src/xz/list.c:1001
 msgid "No"
 msgstr "No"
 
 #. TRANSLATORS: %s is an integer. Only the plural form of this
 #. message is used (e.g. "2 files"). Test with "xz -l foo.xz bar.xz".
-#: src/xz/list.c:986
+#: src/xz/list.c:977
 #, c-format
 msgid "%s file\n"
 msgid_plural "%s files\n"
 msgstr[0] "%s file\n"
 msgstr[1] "%s file\n"
 
-#: src/xz/list.c:999
+#: src/xz/list.c:990
 msgid "Totals:"
 msgstr "Totali:"
 
-#: src/xz/list.c:1000
+#: src/xz/list.c:991
 #, c-format
 msgid "  Number of files:    %s\n"
 msgstr "  Numero di file:       %s\n"
 
-#: src/xz/list.c:1072
+#: src/xz/list.c:1063
 msgid "--list works only on .xz files (--format=xz or --format=auto)"
 msgstr "--list funziona solamente con file .xz (--format=xz o --format=auto)"
 
-#: src/xz/list.c:1078
+#: src/xz/list.c:1069
 msgid "--list does not support reading from standard input"
 msgstr "--list non è in grado di leggere dallo standard input"
 
@@ -427,61 +429,75 @@ msgstr ""
 "Impossibile leggere i dati dallo standard input durante la lettura dei nomi "
 "dei file dallo standard input"
 
-#: src/xz/message.c:800 src/xz/message.c:844
+#. TRANSLATORS: This is the program name in the beginning
+#. of the line in messages. Usually it becomes "xz: ".
+#. This is a translatable string because French needs
+#. a space before a colon.
+#: src/xz/message.c:733
+#, c-format
+msgid "%s: "
+msgstr "%s: "
+
+#: src/xz/message.c:796 src/xz/message.c:846
 msgid "Internal error (bug)"
 msgstr "Errore interno (bug)"
 
-#: src/xz/message.c:807
+#: src/xz/message.c:803
 msgid "Cannot establish signal handlers"
 msgstr "Impossibile stabilire i gestori dei segnali"
 
-#: src/xz/message.c:816
+#: src/xz/message.c:812
 msgid "No integrity check; not verifying file integrity"
 msgstr ""
 "Nessun controllo d'integrità; l'integrità del file non viene verificata"
 
-#: src/xz/message.c:819
+#: src/xz/message.c:815
 msgid "Unsupported type of integrity check; not verifying file integrity"
 msgstr ""
 "Tipo di controllo di integrità non supportato; l'integrità del file non "
 "viene verificata"
 
-#: src/xz/message.c:826
+#: src/xz/message.c:822
 msgid "Memory usage limit reached"
 msgstr "Limite di utilizzo della memoria raggiunto"
 
-#: src/xz/message.c:829
+#: src/xz/message.c:825
 msgid "File format not recognized"
 msgstr "Formato di file non riconosciuto"
 
-#: src/xz/message.c:832
+#: src/xz/message.c:828
 msgid "Unsupported options"
 msgstr "Opzioni non supportate"
 
-#: src/xz/message.c:835
+#: src/xz/message.c:831
 msgid "Compressed data is corrupt"
 msgstr "I dati compressi sono danneggiati"
 
-#: src/xz/message.c:838
+#: src/xz/message.c:834
 msgid "Unexpected end of input"
 msgstr "Fine dell'input non attesa"
 
-#: src/xz/message.c:886
+#: src/xz/message.c:867
+#, c-format
+msgid "%s MiB of memory is required. The limiter is disabled."
+msgstr "%s MiB di memoria sono richiesti. Alcun limite impostato."
+
+#: src/xz/message.c:895
 #, c-format
 msgid "%s MiB of memory is required. The limit is %s."
 msgstr "%s MiB di memoria sono richiesti. Il limite è %s."
 
-#: src/xz/message.c:1053
+#: src/xz/message.c:1062
 #, c-format
 msgid "%s: Filter chain: %s\n"
 msgstr "%s: catena di filtri: %s\n"
 
-#: src/xz/message.c:1063
+#: src/xz/message.c:1072
 #, c-format
 msgid "Try `%s --help' for more information."
 msgstr "Provare \"%s --help\" per maggiori informazioni."
 
-#: src/xz/message.c:1089
+#: src/xz/message.c:1098
 #, c-format
 msgid ""
 "Usage: %s [OPTION]... [FILE]...\n"
@@ -492,18 +508,18 @@ msgstr ""
 "Comprime o estrae i FILE nel formato .xz.\n"
 "\n"
 
-#: src/xz/message.c:1096
+#: src/xz/message.c:1105
 msgid ""
 "Mandatory arguments to long options are mandatory for short options too.\n"
 msgstr ""
 "Gli argomenti obbligatori per le opzioni lunghe lo sono anche per quelle "
 "brevi.\n"
 
-#: src/xz/message.c:1100
+#: src/xz/message.c:1109
 msgid " Operation mode:\n"
 msgstr " Modalità di operazione:\n"
 
-#: src/xz/message.c:1103
+#: src/xz/message.c:1112
 msgid ""
 "  -z, --compress      force compression\n"
 "  -d, --decompress    force decompression\n"
@@ -515,7 +531,7 @@ msgstr ""
 "  -t, --test          Verifica l'integrità dei file compressi\n"
 "  -l, --list          Elenca informazioni sui file .xz"
 
-#: src/xz/message.c:1109
+#: src/xz/message.c:1118
 msgid ""
 "\n"
 " Operation modifiers:\n"
@@ -523,7 +539,7 @@ msgstr ""
 "\n"
 " Modificatori di operazioni:\n"
 
-#: src/xz/message.c:1112
+#: src/xz/message.c:1121
 msgid ""
 "  -k, --keep          keep (don't delete) input files\n"
 "  -f, --force         force overwrite of output file and (de)compress links\n"
@@ -536,7 +552,7 @@ msgstr ""
 "  -c, --stdout        Scrive sullo standard output e non elimina i file di "
 "input"
 
-#: src/xz/message.c:1118
+#: src/xz/message.c:1127
 msgid ""
 "      --no-sparse     do not create sparse files when decompressing\n"
 "  -S, --suffix=.SUF   use the suffix `.SUF' on compressed files\n"
@@ -556,7 +572,7 @@ msgstr ""
 "                      di newline\n"
 "      --files0=[FILE] Come --files ma usa il carattere null come terminatore"
 
-#: src/xz/message.c:1126
+#: src/xz/message.c:1135
 msgid ""
 "\n"
 " Basic file format and compression options:\n"
@@ -564,7 +580,7 @@ msgstr ""
 "\n"
 " Formato file di base e opzioni di compressione:\n"
 
-#: src/xz/message.c:1128
+#: src/xz/message.c:1137
 msgid ""
 "  -F, --format=FMT    file format to encode or decode; possible values are\n"
 "                      `auto' (default), `xz', `lzma', and `raw'\n"
@@ -579,12 +595,12 @@ msgstr ""
 "attenzione),\n"
 "                      \"crc32\", \"crc64\" (predefinito) o \"sha256\""
 
-#: src/xz/message.c:1135
+#: src/xz/message.c:1144
 msgid ""
 "  -0 ... -9           compression preset; default is 6; take compressor "
 "*and*\n"
-"                      decompressor memory usage into account before using 7-"
-"9!"
+"                      decompressor memory usage into account before using "
+"7-9!"
 msgstr ""
 "  -0 ... -9           Preset di compressione; predefinito è 6; tenere a "
 "mente\n"
@@ -592,7 +608,7 @@ msgstr ""
 "prima\n"
 "                      di usare 7-9"
 
-#: src/xz/message.c:1139
+#: src/xz/message.c:1148
 msgid ""
 "  -e, --extreme       try to improve compression ratio by using more CPU "
 "time;\n"
@@ -603,7 +619,7 @@ msgstr ""
 "di\n"
 "                      memoria in fase di estrazione"
 
-#: src/xz/message.c:1144
+#: src/xz/message.c:1153
 #, no-c-format
 msgid ""
 "      --memlimit-compress=LIMIT\n"
@@ -621,7 +637,7 @@ msgstr ""
 "byte,\n"
 "                      % della memoria RAM oppure 0 per il valore predefinito"
 
-#: src/xz/message.c:1151
+#: src/xz/message.c:1160
 msgid ""
 "      --no-adjust     if compression settings exceed the memory usage "
 "limit,\n"
@@ -633,7 +649,7 @@ msgstr ""
 "                      utilizzo della memoria, lancia un errore invece di\n"
 "                      utilizzare valori più piccoli"
 
-#: src/xz/message.c:1157
+#: src/xz/message.c:1166
 msgid ""
 "\n"
 " Custom filter chain for compression (alternative for using presets):"
@@ -642,7 +658,7 @@ msgstr ""
 " Catena di filtri personalizzati per la compressione (alternative per\n"
 " l'utilizzo di preset):"
 
-#: src/xz/message.c:1166
+#: src/xz/message.c:1175
 msgid ""
 "\n"
 "  --lzma1[=OPTS]      LZMA1 or LZMA2; OPTS is a comma-separated list of zero "
@@ -672,8 +688,8 @@ msgstr ""
 "                                   (4KiB - 1536MiB; 8MiB)\n"
 "                        lc=NUM     Numero di bit letterali di contesto (0-4; "
 "3)\n"
-"                        lp=NUM     Numero di bit letterali di posizione (0-"
-"4; 0)\n"
+"                        lp=NUM     Numero di bit letterali di posizione "
+"(0-4; 0)\n"
 "                        pb=NUM     Numero di bit di posizione (0-4; 2)\n"
 "                        mode=MODE  Modalità di compressione\n"
 "                                   (fast, normal; normal)\n"
@@ -685,7 +701,7 @@ msgstr ""
 "0=automatica\n"
 "                                   (predefinito)"
 
-#: src/xz/message.c:1181
+#: src/xz/message.c:1190
 msgid ""
 "\n"
 "  --x86[=OPTS]        x86 BCJ filter (32-bit and 64-bit)\n"
@@ -708,7 +724,7 @@ msgstr ""
 "                      start=NUM Offset iniziale per le conversioni\n"
 "                                (predefinito=0)"
 
-#: src/xz/message.c:1193
+#: src/xz/message.c:1202
 msgid ""
 "\n"
 "  --delta[=OPTS]      Delta filter; valid OPTS (valid values; default):\n"
@@ -720,7 +736,7 @@ msgstr ""
 "                      dist=NUM   Distanza tra byte sottratti\n"
 "                                 gli uni dagli altri (1-256; 1)"
 
-#: src/xz/message.c:1201
+#: src/xz/message.c:1210
 msgid ""
 "\n"
 " Other options:\n"
@@ -728,7 +744,7 @@ msgstr ""
 "\n"
 " Altre opzioni:\n"
 
-#: src/xz/message.c:1204
+#: src/xz/message.c:1213
 msgid ""
 "  -q, --quiet         suppress warnings; specify twice to suppress errors "
 "too\n"
@@ -741,16 +757,16 @@ msgstr ""
 "ancora\n"
 "                      più prolisso"
 
-#: src/xz/message.c:1209
+#: src/xz/message.c:1218
 msgid "  -Q, --no-warn       make warnings not affect the exit status"
 msgstr "  -Q, --no-warn       Gli avvisi non influenzano lo stato d'uscita"
 
-#: src/xz/message.c:1211
+#: src/xz/message.c:1220
 msgid ""
 "      --robot         use machine-parsable messages (useful for scripts)"
 msgstr "      --robot         Usa messaggi analizzabili (utile per gli script)"
 
-#: src/xz/message.c:1214
+#: src/xz/message.c:1223
 msgid ""
 "      --info-memory   display the total amount of RAM and the currently "
 "active\n"
@@ -760,7 +776,7 @@ msgstr ""
 "attuale\n"
 "                      attivo di utilizzo della memore ed esce"
 
-#: src/xz/message.c:1217
+#: src/xz/message.c:1226
 msgid ""
 "  -h, --help          display the short help (lists only the basic options)\n"
 "  -H, --long-help     display this long help and exit"
@@ -768,7 +784,7 @@ msgstr ""
 "  -h, --help          Stampa l'aiuto breve (elenca solo le opzioni di base)\n"
 "  -H, --long-help     Stampa questo lungo aiuto ed esce"
 
-#: src/xz/message.c:1221
+#: src/xz/message.c:1230
 msgid ""
 "  -h, --help          display this short help and exit\n"
 "  -H, --long-help     display the long help (lists also the advanced options)"
@@ -776,11 +792,11 @@ msgstr ""
 "  -h, --help          Stampa questo breve aiuto ed esce\n"
 "  -H, --long-help     Stampa l'aiuto lungo (elenca anche le opzioni avanzate)"
 
-#: src/xz/message.c:1226
+#: src/xz/message.c:1235
 msgid "  -V, --version       display the version number and exit"
 msgstr "  -V, --version       Stampa il numero della versione ed esce"
 
-#: src/xz/message.c:1228
+#: src/xz/message.c:1237
 msgid ""
 "\n"
 "With no FILE, or when FILE is -, read standard input.\n"
@@ -792,14 +808,14 @@ msgstr ""
 #. for this package. Please add _another line_ saying
 #. "Report translation bugs to <...>\n" with the email or WWW
 #. address for translation bugs. Thanks.
-#: src/xz/message.c:1234
+#: src/xz/message.c:1243
 #, c-format
 msgid "Report bugs to <%s> (in English or Finnish).\n"
 msgstr ""
 "Segnalare i bug a <%s> (in inglese o finlandese).\n"
 "Segnalare i bug di traduzione a <tp@lists.linux.it>.\n"
 
-#: src/xz/message.c:1236
+#: src/xz/message.c:1245
 #, c-format
 msgid "%s home page: <%s>\n"
 msgstr "Sito web di %s: <%s>\n"
@@ -833,10 +849,10 @@ msgstr "La somma di lc e lp non deve superare 4"
 #, c-format
 msgid "The selected match finder requires at least nice=%<PRIu32>"
 msgstr ""
-"Lo strumento per cercare corrispondenze selezionato richiede almeno nice=%"
-"<PRIu32>"
+"Lo strumento per cercare corrispondenze selezionato richiede almeno nice="
+"%<PRIu32>"
 
-#: src/xz/suffix.c:79 src/xz/suffix.c:164
+#: src/xz/suffix.c:101 src/xz/suffix.c:194
 #, c-format
 msgid ""
 "%s: With --format=raw, --suffix=.SUF is required unless writing to stdout"
@@ -844,17 +860,17 @@ msgstr ""
 "%s: con --format=raw, --suffix=.SUF è richiesto a meno che non si scriva "
 "sullo stdout"
 
-#: src/xz/suffix.c:99
+#: src/xz/suffix.c:121
 #, c-format
 msgid "%s: Filename has an unknown suffix, skipping"
 msgstr "%s: il nome del file ha un suffisso sconosciuto, viene saltato"
 
-#: src/xz/suffix.c:154
+#: src/xz/suffix.c:175 src/xz/suffix.c:184
 #, c-format
 msgid "%s: File already has `%s' suffix, skipping"
 msgstr "%s: il file ha già il suffisso \"%s\", viene saltato"
 
-#: src/xz/suffix.c:205
+#: src/xz/suffix.c:235
 #, c-format
 msgid "%s: Invalid filename suffix"
 msgstr "%s: suffisso del nome del file non valido"
@@ -878,8 +894,8 @@ msgstr ""
 #, c-format
 msgid "Value of the option `%s' must be in the range [%<PRIu64>, %<PRIu64>]"
 msgstr ""
-"Il valore dell'opzione \"%s\" deve essere nell'intervallo [%<PRIu64>, %"
-"<PRIu64>]"
+"Il valore dell'opzione \"%s\" deve essere nell'intervallo [%<PRIu64>, "
+"%<PRIu64>]"
 
 #: src/xz/util.c:247
 msgid "Empty filename, skipping"

po/pl.po

@@ -0,0 +1,839 @@
+# Polish translation for xz.
+# This file is in the public domain.
+# Jakub Bogusz <qboosh@pld-linux.org>, 2011-2012.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: xz 5.0.2\n"
+"Report-Msgid-Bugs-To: lasse.collin@tukaani.org\n"
+"POT-Creation-Date: 2012-05-29 13:50+0300\n"
+"PO-Revision-Date: 2012-05-29 18:15+0200\n"
+"Last-Translator: Jakub Bogusz <qboosh@pld-linux.org>\n"
+"Language-Team: Polish <translation-team-pl@lists.sourceforge.net>\n"
+"Language: pl\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
+
+#: src/xz/args.c:333
+#, c-format
+msgid "%s: Unknown file format type"
+msgstr "%s: Nieznany typ formatu pliku"
+
+#: src/xz/args.c:356 src/xz/args.c:364
+#, c-format
+msgid "%s: Unsupported integrity check type"
+msgstr "%s: Nieobsługiwany typ kontroli spójności"
+
+#: src/xz/args.c:382
+msgid "Only one file can be specified with `--files' or `--files0'."
+msgstr "Wraz z opcją `--files' lub `--files0' można podać tylko jeden plik."
+
+#: src/xz/args.c:445
+#, c-format
+msgid "The environment variable %s contains too many arguments"
+msgstr "Zmienna środowiskowa %s zawiera zbyt dużo argumentów"
+
+#: src/xz/coder.c:95
+msgid "Maximum number of filters is four"
+msgstr "Maksymalna liczba filtrów to cztery"
+
+#: src/xz/coder.c:108
+msgid "Memory usage limit is too low for the given filter setup."
+msgstr "Limit użycia pamięci jest zbyt mały dla podanej konfiguracji filtra."
+
+#: src/xz/coder.c:129
+msgid "Using a preset in raw mode is discouraged."
+msgstr "Użycie ustawień predefiniowanych w trybie surowym jest odradzane."
+
+#: src/xz/coder.c:131
+msgid "The exact options of the presets may vary between software versions."
+msgstr "Dokładne opcje ustawień predefiniowanych mogą różnić się między wersjami oprogramowania."
+
+#: src/xz/coder.c:157
+msgid "The .lzma format supports only the LZMA1 filter"
+msgstr "Format .lzma obsługuje tylko filtr LZMA1"
+
+#: src/xz/coder.c:165
+msgid "LZMA1 cannot be used with the .xz format"
+msgstr "LZMA1 nie może być używany z formatem .xz"
+
+#: src/xz/coder.c:182
+msgid "Unsupported filter chain or filter options"
+msgstr "Nieobsługiwany łańcuch filtrów lub opcje filtra"
+
+#: src/xz/coder.c:190
+#, c-format
+msgid "Decompression will need %s MiB of memory."
+msgstr "Dekompresja będzie wymagała %s MiB pamięci."
+
+#: src/xz/coder.c:247
+#, c-format
+msgid "Adjusted LZMA%c dictionary size from %s MiB to %s MiB to not exceed the memory usage limit of %s MiB"
+msgstr "Skorygowano rozmiar słownika LZMA%c z %s MiB do %s MiB aby nie przekroczyć limitu użycia pamięci %s MiB"
+
+#. TRANSLATORS: When compression or decompression finishes,
+#. and xz is going to remove the source file, xz first checks
+#. if the source file still exists, and if it does, does its
+#. device and inode numbers match what xz saw when it opened
+#. the source file. If these checks fail, this message is
+#. shown, %s being the filename, and the file is not deleted.
+#. The check for device and inode numbers is there, because
+#. it is possible that the user has put a new file in place
+#. of the original file, and in that case it obviously
+#. shouldn't be removed.
+#: src/xz/file_io.c:137
+#, c-format
+msgid "%s: File seems to have been moved, not removing"
+msgstr "%s: Plik wygląda na przeniesiony, nie zostanie usunięty"
+
+#: src/xz/file_io.c:144 src/xz/file_io.c:589
+#, c-format
+msgid "%s: Cannot remove: %s"
+msgstr "%s: Nie można usunąć: %s"
+
+#: src/xz/file_io.c:169
+#, c-format
+msgid "%s: Cannot set the file owner: %s"
+msgstr "%s: Nie można ustawić właściciela pliku: %s"
+
+#: src/xz/file_io.c:175
+#, c-format
+msgid "%s: Cannot set the file group: %s"
+msgstr "%s: Nie można ustawić grupy pliku: %s"
+
+#: src/xz/file_io.c:194
+#, c-format
+msgid "%s: Cannot set the file permissions: %s"
+msgstr "%s: Nie można ustawić uprawnień pliku: %s"
+
+#: src/xz/file_io.c:337 src/xz/file_io.c:420
+#, c-format
+msgid "%s: Is a symbolic link, skipping"
+msgstr "%s: Jest dowiązaniem symbolicznym, pominięto"
+
+#: src/xz/file_io.c:455
+#, c-format
+msgid "%s: Is a directory, skipping"
+msgstr "%s: Jest katalogiem, pominięto"
+
+#: src/xz/file_io.c:461
+#, c-format
+msgid "%s: Not a regular file, skipping"
+msgstr "%s: Nie jest zwykłym plikiem, pominięto"
+
+#: src/xz/file_io.c:478
+#, c-format
+msgid "%s: File has setuid or setgid bit set, skipping"
+msgstr "%s: Plik ma ustawiony bit setuid lub setgid, pominięto"
+
+#: src/xz/file_io.c:485
+#, c-format
+msgid "%s: File has sticky bit set, skipping"
+msgstr "%s: Plik ma ustawiony bit sticky, pominięto"
+
+#: src/xz/file_io.c:492
+#, c-format
+msgid "%s: Input file has more than one hard link, skipping"
+msgstr "%s: Plik wejściowy ma więcej niż jedno dowiązanie zwykłe, pominięto"
+
+#: src/xz/file_io.c:713
+#, c-format
+msgid "Error restoring the O_APPEND flag to standard output: %s"
+msgstr "Błąd podczas odtwarzania flagi O_APPEND dla standardowego wyjścia: %s"
+
+#: src/xz/file_io.c:725
+#, c-format
+msgid "%s: Closing the file failed: %s"
+msgstr "%s: Zamknięcie pliku nie powiodło się: %s"
+
+#: src/xz/file_io.c:761 src/xz/file_io.c:945
+#, c-format
+msgid "%s: Seeking failed when trying to create a sparse file: %s"
+msgstr "%s: Zmiana pozycji nie powiodła się podczas próby utworzenia pliku rzadkiego: %s"
+
+#: src/xz/file_io.c:820
+#, c-format
+msgid "%s: Read error: %s"
+msgstr "%s: Błąd odczytu: %s"
+
+#: src/xz/file_io.c:843
+#, c-format
+msgid "%s: Error seeking the file: %s"
+msgstr "%s: Błąd podczas zmiany pozycji w pliku: %s"
+
+#: src/xz/file_io.c:853
+#, c-format
+msgid "%s: Unexpected end of file"
+msgstr "%s: Nieoczekiwany koniec pliku"
+
+#: src/xz/file_io.c:903
+#, c-format
+msgid "%s: Write error: %s"
+msgstr "%s: Błąd zapisu: %s"
+
+#: src/xz/hardware.c:100
+msgid "Disabled"
+msgstr "Wyłączony"
+
+#. TRANSLATORS: Test with "xz --info-memory" to see if
+#. the alignment looks nice.
+#: src/xz/hardware.c:119
+msgid "Total amount of physical memory (RAM): "
+msgstr "Całkowita ilość pamięci fizycznej (RAM): "
+
+#: src/xz/hardware.c:121
+msgid "Memory usage limit for compression:    "
+msgstr "Limit użycia pamięci dla kompresji:      "
+
+#: src/xz/hardware.c:123
+msgid "Memory usage limit for decompression:  "
+msgstr "Limit użycia pamięci dla dekompresji:    "
+
+#. TRANSLATORS: Indicates that there is no integrity check.
+#. This string is used in tables, so the width must not
+#. exceed ten columns with a fixed-width font.
+#: src/xz/list.c:62
+msgid "None"
+msgstr "Brak"
+
+#. TRANSLATORS: Indicates that integrity check name is not known,
+#. but the Check ID is known (here 2). This and other "Unknown-N"
+#. strings are used in tables, so the width must not exceed ten
+#. columns with a fixed-width font. It's OK to omit the dash if
+#. you need space for one extra letter, but don't use spaces.
+#: src/xz/list.c:69
+msgid "Unknown-2"
+msgstr "Nieznany-2"
+
+#: src/xz/list.c:70
+msgid "Unknown-3"
+msgstr "Nieznany-3"
+
+#: src/xz/list.c:72
+msgid "Unknown-5"
+msgstr "Nieznany-5"
+
+#: src/xz/list.c:73
+msgid "Unknown-6"
+msgstr "Nieznany-6"
+
+#: src/xz/list.c:74
+msgid "Unknown-7"
+msgstr "Nieznany-7"
+
+#: src/xz/list.c:75
+msgid "Unknown-8"
+msgstr "Nieznany-8"
+
+#: src/xz/list.c:76
+msgid "Unknown-9"
+msgstr "Nieznany-9"
+
+#: src/xz/list.c:78
+msgid "Unknown-11"
+msgstr "Nieznany11"
+
+#: src/xz/list.c:79
+msgid "Unknown-12"
+msgstr "Nieznany12"
+
+#: src/xz/list.c:80
+msgid "Unknown-13"
+msgstr "Nieznany13"
+
+#: src/xz/list.c:81
+msgid "Unknown-14"
+msgstr "Nieznany14"
+
+#: src/xz/list.c:82
+msgid "Unknown-15"
+msgstr "Nieznany15"
+
+#: src/xz/list.c:126
+#, c-format
+msgid "%s: File is empty"
+msgstr "%s: Plik jest pusty"
+
+#: src/xz/list.c:131
+#, c-format
+msgid "%s: Too small to be a valid .xz file"
+msgstr "%s: Za mały na poprawny plik .xz"
+
+#. TRANSLATORS: These are column headings. From Strms (Streams)
+#. to Ratio, the columns are right aligned. Check and Filename
+#. are left aligned. If you need longer words, it's OK to
+#. use two lines here. Test with "xz -l foo.xz".
+#: src/xz/list.c:603
+msgid "Strms  Blocks   Compressed Uncompressed  Ratio  Check   Filename"
+msgstr "Strum.  Bloki    Spakowany  Rozpakowany  Wsp.  Kontrola Nazwa pliku"
+
+#: src/xz/list.c:643
+#, c-format
+msgid "  Streams:            %s\n"
+msgstr "  Strumienie:            %s\n"
+
+#: src/xz/list.c:645
+#, c-format
+msgid "  Blocks:             %s\n"
+msgstr "  Bloki:                 %s\n"
+
+#: src/xz/list.c:647
+#, c-format
+msgid "  Compressed size:    %s\n"
+msgstr "  Rozmiar spakowany:     %s\n"
+
+#: src/xz/list.c:650
+#, c-format
+msgid "  Uncompressed size:  %s\n"
+msgstr "  Rozmiar rozpakowany:   %s\n"
+
+#: src/xz/list.c:653
+#, c-format
+msgid "  Ratio:              %s\n"
+msgstr "  Współczynnik:          %s\n"
+
+#: src/xz/list.c:655
+#, c-format
+msgid "  Check:              %s\n"
+msgstr "  Kontrola spójności:    %s\n"
+
+#: src/xz/list.c:656
+#, c-format
+msgid "  Stream padding:     %s\n"
+msgstr "  Wyrównanie strumienia: %s\n"
+
+#. TRANSLATORS: The second line is column headings. All except
+#. Check are right aligned; Check is left aligned. Test with
+#. "xz -lv foo.xz".
+#: src/xz/list.c:684
+msgid ""
+"  Streams:\n"
+"    Stream    Blocks      CompOffset    UncompOffset        CompSize      UncompSize  Ratio  Check      Padding"
+msgstr ""
+"  Strumienie:\n"
+"  Strumień     Bloki    Offset spak.    Offset rozp.        Rozm.spak.    Rozm.rozp.  Wsp.   Kontrola   Wyrównanie"
+
+#. TRANSLATORS: The second line is column headings. All
+#. except Check are right aligned; Check is left aligned.
+#: src/xz/list.c:739
+#, c-format
+msgid ""
+"  Blocks:\n"
+"    Stream     Block      CompOffset    UncompOffset       TotalSize      UncompSize  Ratio  Check"
+msgstr ""
+"  Bloki:\n"
+"  Strumień      Blok    Offset spak.    Offset rozp.  Rozm.całkowity      Rozm.rozp.  Wsp.   Kontrola"
+
+#. TRANSLATORS: These are additional column headings
+#. for the most verbose listing mode. CheckVal
+#. (Check value), Flags, and Filters are left aligned.
+#. Header (Block Header Size), CompSize, and MemUsage
+#. are right aligned. %*s is replaced with 0-120
+#. spaces to make the CheckVal column wide enough.
+#. Test with "xz -lvv foo.xz".
+#: src/xz/list.c:751
+#, c-format
+msgid "      CheckVal %*s Header  Flags        CompSize    MemUsage  Filters"
+msgstr "   S.kontr. %*sNagłówek Flagi     Rozm. spak.  Uż.pamięci  Filtry"
+
+#: src/xz/list.c:829 src/xz/list.c:998
+#, c-format
+msgid "  Memory needed:      %s MiB\n"
+msgstr "  Wymagana pamięć:       %s MiB\n"
+
+#: src/xz/list.c:831 src/xz/list.c:1000
+#, c-format
+msgid "  Sizes in headers:   %s\n"
+msgstr "  Rozmiar w nagłówkach:  %s\n"
+
+#: src/xz/list.c:832 src/xz/list.c:1001
+msgid "Yes"
+msgstr "Tak"
+
+#: src/xz/list.c:832 src/xz/list.c:1001
+msgid "No"
+msgstr "Nie"
+
+#. TRANSLATORS: %s is an integer. Only the plural form of this
+#. message is used (e.g. "2 files"). Test with "xz -l foo.xz bar.xz".
+#: src/xz/list.c:977
+#, c-format
+msgid "%s file\n"
+msgid_plural "%s files\n"
+msgstr[0] "%s plik\n"
+msgstr[1] "%s pliki\n"
+msgstr[2] "%s plików\n"
+
+#: src/xz/list.c:990
+msgid "Totals:"
+msgstr "Sumarycznie:"
+
+#: src/xz/list.c:991
+#, c-format
+msgid "  Number of files:    %s\n"
+msgstr "  Liczba plików:         %s\n"
+
+#: src/xz/list.c:1063
+msgid "--list works only on .xz files (--format=xz or --format=auto)"
+msgstr "--list działa tylko z plikami .xz (--format=xz lub --format=auto)"
+
+#: src/xz/list.c:1069
+msgid "--list does not support reading from standard input"
+msgstr "--list nie obsługuje odczytu ze standardowego wejścia"
+
+#: src/xz/main.c:89
+#, c-format
+msgid "%s: Error reading filenames: %s"
+msgstr "%s: Błąd odczytu nazw plików: %s"
+
+#: src/xz/main.c:96
+#, c-format
+msgid "%s: Unexpected end of input when reading filenames"
+msgstr "%s: Nieoczekiwany koniec wejścia podczas odczytu nazw plików"
+
+#: src/xz/main.c:120
+#, c-format
+msgid "%s: Null character found when reading filenames; maybe you meant to use `--files0' instead of `--files'?"
+msgstr "%s: Napotkano znak NUL podczas odczytu nazw plików; może miało być `--files0' zamiast `--files'?"
+
+#: src/xz/main.c:174
+msgid "Compression and decompression with --robot are not supported yet."
+msgstr "Kompresja i dekompresja z opcją --robot nie jest jeszcze obsługiwana."
+
+#: src/xz/main.c:231
+msgid "Cannot read data from standard input when reading filenames from standard input"
+msgstr "Nie można odczytać danych ze standardowego wejścia przy czytaniu nazw plików ze standardowego wejścia"
+
+#. TRANSLATORS: This is the program name in the beginning
+#. of the line in messages. Usually it becomes "xz: ".
+#. This is a translatable string because French needs
+#. a space before a colon.
+#: src/xz/message.c:733
+#, c-format
+msgid "%s: "
+msgstr "%s: "
+
+#: src/xz/message.c:796 src/xz/message.c:846
+msgid "Internal error (bug)"
+msgstr "Błąd wewnętrzny"
+
+#: src/xz/message.c:803
+msgid "Cannot establish signal handlers"
+msgstr "Nie można ustawić obsługi sygnałów"
+
+#: src/xz/message.c:812
+msgid "No integrity check; not verifying file integrity"
+msgstr "Brak kontroli spójności; poprawność plików nie będzie weryfikowana"
+
+#: src/xz/message.c:815
+msgid "Unsupported type of integrity check; not verifying file integrity"
+msgstr "Nieobsługiwany typ kontroli spójności; poprawność plików nie będzie weryfikowana"
+
+#: src/xz/message.c:822
+msgid "Memory usage limit reached"
+msgstr "Osiągnięto limit użycia pamięci"
+
+#: src/xz/message.c:825
+msgid "File format not recognized"
+msgstr "Nie rozpoznany format pliku"
+
+#: src/xz/message.c:828
+msgid "Unsupported options"
+msgstr "Nieobsługiwane opcje"
+
+#: src/xz/message.c:831
+msgid "Compressed data is corrupt"
+msgstr "Dane skompresowane są uszkodzone"
+
+#: src/xz/message.c:834
+msgid "Unexpected end of input"
+msgstr "Nieoczekiwany koniec wejścia"
+
+#: src/xz/message.c:867
+#, c-format
+msgid "%s MiB of memory is required. The limiter is disabled."
+msgstr "Wymagane jest %s MiB pamięci. Limit jest wyłączony."
+
+#: src/xz/message.c:895
+#, c-format
+msgid "%s MiB of memory is required. The limit is %s."
+msgstr "Wymagane jest %s MiB pamięci. Limit to %s."
+
+#: src/xz/message.c:1062
+#, c-format
+msgid "%s: Filter chain: %s\n"
+msgstr "%s: Łańcuch filtrów: %s\n"
+
+#: src/xz/message.c:1072
+#, c-format
+msgid "Try `%s --help' for more information."
+msgstr "Polecenie `%s --help' pokaże więcej informacji."
+
+#: src/xz/message.c:1098
+#, c-format
+msgid ""
+"Usage: %s [OPTION]... [FILE]...\n"
+"Compress or decompress FILEs in the .xz format.\n"
+"\n"
+msgstr ""
+"Składnia: %s [OPCJA]... [PLIK]...\n"
+"Kompresja lub dekompresja PLIKÓW w formacie .xz.\n"
+"\n"
+
+#: src/xz/message.c:1105
+msgid "Mandatory arguments to long options are mandatory for short options too.\n"
+msgstr ""
+"Argumenty obowiązkowe dla opcji długich są obowiązkowe również dla opcji\n"
+"krótkich.\n"
+
+#: src/xz/message.c:1109
+msgid " Operation mode:\n"
+msgstr " Tryb pracy:\n"
+
+#: src/xz/message.c:1112
+msgid ""
+"  -z, --compress      force compression\n"
+"  -d, --decompress    force decompression\n"
+"  -t, --test          test compressed file integrity\n"
+"  -l, --list          list information about .xz files"
+msgstr ""
+"  -z, --compress      wymuszenie kompresji\n"
+"  -d, --decompress    wymuszenie dekompresji\n"
+"  -t, --test          sprawdzenie spójności plików skompresowanych\n"
+"  -l, --list          wypisanie informacji o plikach .xz"
+
+#: src/xz/message.c:1118
+msgid ""
+"\n"
+" Operation modifiers:\n"
+msgstr ""
+"\n"
+" Modyfikatory operacji:\n"
+
+#: src/xz/message.c:1121
+msgid ""
+"  -k, --keep          keep (don't delete) input files\n"
+"  -f, --force         force overwrite of output file and (de)compress links\n"
+"  -c, --stdout        write to standard output and don't delete input files"
+msgstr ""
+"  -k, --keep          zachowanie (nieusuwanie) plików wejściowych\n"
+"  -f, --force         nadpisywanie plików wyjściowych i (de)kompresja dowiązań\n"
+"  -c, --stdout        zapis na standardowe wyjście, nieusuwanie plików wej."
+
+#: src/xz/message.c:1127
+msgid ""
+"      --no-sparse     do not create sparse files when decompressing\n"
+"  -S, --suffix=.SUF   use the suffix `.SUF' on compressed files\n"
+"      --files[=FILE]  read filenames to process from FILE; if FILE is\n"
+"                      omitted, filenames are read from the standard input;\n"
+"                      filenames must be terminated with the newline character\n"
+"      --files0[=FILE] like --files but use the null character as terminator"
+msgstr ""
+"      --no-sparse     nietworzenie plików rzadkich podczas dekompresji\n"
+"  -S, --suffix=.ROZ   użycie rozszerzenia `.ROZ' dla plików skompresowanych\n"
+"      --files[=PLIK]  odczyt nazw plików do przetworzenia z PLIKU; jeśli PLIK\n"
+"                      nie został podany, nazwy są czytane ze standardowego\n"
+"                      wejścia; muszą być zakończone znakiem nowej linii\n"
+"      --files0[=PLIK] podobnie do --files, ale znakiem kończącym musi być NUL"
+
+#: src/xz/message.c:1135
+msgid ""
+"\n"
+" Basic file format and compression options:\n"
+msgstr ""
+"\n"
+" Podstawowe opcje formatu pliku i kompresji:\n"
+
+#: src/xz/message.c:1137
+msgid ""
+"  -F, --format=FMT    file format to encode or decode; possible values are\n"
+"                      `auto' (default), `xz', `lzma', and `raw'\n"
+"  -C, --check=CHECK   integrity check type: `none' (use with caution),\n"
+"                      `crc32', `crc64' (default), or `sha256'"
+msgstr ""
+"  -F, --format=FORM   format pliki do kodowania lub dekodowania; możliwe to\n"
+"                      `auto' (domyślny), `xz', 'lzma' i `raw'\n"
+"  -C, --check=TEST    typ kontroli spójności: `none' (ostrożnie!),\n"
+"                      `crc32', `crc64' (domyślny) lub `sha256'"
+
+#: src/xz/message.c:1144
+msgid ""
+"  -0 ... -9           compression preset; default is 6; take compressor *and*\n"
+"                      decompressor memory usage into account before using 7-9!"
+msgstr ""
+"  -0 ... -9           predefiniowane opcje kompresji; domyślna to 6; przed\n"
+"                      użyciem wartości 7-9 należy wziąć pod uwagę wykorzystanie\n"
+"                      pamięci przy kompresji *oraz* dekompresji!"
+
+#: src/xz/message.c:1148
+msgid ""
+"  -e, --extreme       try to improve compression ratio by using more CPU time;\n"
+"                      does not affect decompressor memory requirements"
+msgstr ""
+"  -e, --extreme       próba poprawy współczynnika kompresji z użyciem większej\n"
+"                      ilości czasu procesora; nie wpływa na wymagania\n"
+"                      pamięciowe dekompresora"
+
+#: src/xz/message.c:1153
+#, no-c-format
+msgid ""
+"      --memlimit-compress=LIMIT\n"
+"      --memlimit-decompress=LIMIT\n"
+"  -M, --memlimit=LIMIT\n"
+"                      set memory usage limit for compression, decompression,\n"
+"                      or both; LIMIT is in bytes, % of RAM, or 0 for defaults"
+msgstr ""
+"      --memlimit-compress=LIMIT\n"
+"      --memlimit-decompress=LIMIT\n"
+"  -M, --memlimit=LIMIT\n"
+"                      ustawienie limitu użycia pamięci dla kompresji,\n"
+"                      dekompresji lub obu; LIMIT jest w bajtach, % RAM lub 0\n"
+"                      dla limitów domyślnych"
+
+#: src/xz/message.c:1160
+msgid ""
+"      --no-adjust     if compression settings exceed the memory usage limit,\n"
+"                      give an error instead of adjusting the settings downwards"
+msgstr ""
+"      --no-adjust     jeśli ustawienia kompresji przekraczają limit użycia\n"
+"                      pamięci, zostanie zgłoszony błąd zamiast zmniejszania\n"
+"                      ustawień"
+
+#: src/xz/message.c:1166
+msgid ""
+"\n"
+" Custom filter chain for compression (alternative for using presets):"
+msgstr ""
+"\n"
+" Łańcuch własnych filtrów do kompresji (alternatywa do używania -0 .. -9):"
+
+#: src/xz/message.c:1175
+msgid ""
+"\n"
+"  --lzma1[=OPTS]      LZMA1 or LZMA2; OPTS is a comma-separated list of zero or\n"
+"  --lzma2[=OPTS]      more of the following options (valid values; default):\n"
+"                        preset=PRE reset options to a preset (0-9[e])\n"
+"                        dict=NUM   dictionary size (4KiB - 1536MiB; 8MiB)\n"
+"                        lc=NUM     number of literal context bits (0-4; 3)\n"
+"                        lp=NUM     number of literal position bits (0-4; 0)\n"
+"                        pb=NUM     number of position bits (0-4; 2)\n"
+"                        mode=MODE  compression mode (fast, normal; normal)\n"
+"                        nice=NUM   nice length of a match (2-273; 64)\n"
+"                        mf=NAME    match finder (hc3, hc4, bt2, bt3, bt4; bt4)\n"
+"                        depth=NUM  maximum search depth; 0=automatic (default)"
+msgstr ""
+"\n"
+"  --lzma1[=OPCJE]     LZMA1 lub LZMA2; OPCJE to oddzielona przecinkami lista\n"
+"  --lzma2[=OPCJE]     zera lub więcej następujących opcji (w nawiasach wartości\n"
+"                      poprawne; domyślne):\n"
+"                        preset=PRE ustawienie opcji na predefiniowane (0-9[e])\n"
+"                        dict=ILE   rozmiar słownika (4KiB - 1536MiB; 8MiB)\n"
+"                        lc=ILE     liczba bitów kontekstu literału (0-4; 3)\n"
+"                        lp=ILE     liczba bitów pozycji literału (0-4; 0)\n"
+"                        pp=ILE     liczba bitów pozycji (0-4; 2)\n"
+"                        mode=TRYB  tryb kompresji (fast, normal; normal)\n"
+"                        nice=ILE   długość dopasowania (2-273; 64)\n"
+"                        mf=NAZWA   dopasowywacz (hc3, hc4, bt2, bt3, bt4; bt4)\n"
+"                        depth=ILE  maks. głębokość szukania; 0=auto (domyślne)"
+
+#: src/xz/message.c:1190
+msgid ""
+"\n"
+"  --x86[=OPTS]        x86 BCJ filter (32-bit and 64-bit)\n"
+"  --powerpc[=OPTS]    PowerPC BCJ filter (big endian only)\n"
+"  --ia64[=OPTS]       IA-64 (Itanium) BCJ filter\n"
+"  --arm[=OPTS]        ARM BCJ filter (little endian only)\n"
+"  --armthumb[=OPTS]   ARM-Thumb BCJ filter (little endian only)\n"
+"  --sparc[=OPTS]      SPARC BCJ filter\n"
+"                      Valid OPTS for all BCJ filters:\n"
+"                        start=NUM  start offset for conversions (default=0)"
+msgstr ""
+"\n"
+"  --x86[=OPCJE]       Filtr BCJ x86 (32-bitowy lub 64-bitowy)\n"
+"  --powerpc[=OPCJE]   Filtr BCJ PowerPC (tylko big-endian)\n"
+"  --ia64[=OPCJE]      Filtr BCJ IA-64 (Itanium)\n"
+"  --arm[=OPCJE]       Filtr BCJ ARM (tylko little-endian)\n"
+"  --armthumb[=OPCJE]  Filtr BCJ ARM-Thumb (tylko little-endian)\n"
+"  --sparc[=OPCJE]     Filtr BCJ SPARC\n"
+"                      Poprawne OPCJE dla wszystkich filtrów BCJ:\n"
+"                        start=ILE  offset początku konwersji (domyślnie=0)"
+
+#: src/xz/message.c:1202
+msgid ""
+"\n"
+"  --delta[=OPTS]      Delta filter; valid OPTS (valid values; default):\n"
+"                        dist=NUM   distance between bytes being subtracted\n"
+"                                   from each other (1-256; 1)"
+msgstr ""
+"\n"
+"  --delta[=OPCJE]     Filtr delta; poprawne OPCJE (poprawne wart.; domyślne):\n"
+"                        dist=ILE   odległość między bajtami odejmowanymi od\n"
+"                                   siebie (1-256; 1)"
+
+#: src/xz/message.c:1210
+msgid ""
+"\n"
+" Other options:\n"
+msgstr ""
+"\n"
+" Inne opcje:\n"
+
+#: src/xz/message.c:1213
+msgid ""
+"  -q, --quiet         suppress warnings; specify twice to suppress errors too\n"
+"  -v, --verbose       be verbose; specify twice for even more verbose"
+msgstr ""
+"  -q, --quiet         pominięcie ostrzeżeń; dwukrotne podanie pomija też błędy\n"
+"  -v, --verbose       więcej informacji; dwukrotne podanie to jeszcze więcej"
+
+#: src/xz/message.c:1218
+msgid "  -Q, --no-warn       make warnings not affect the exit status"
+msgstr "  -Q, --no-warn       ostrzeżenia nie mają wpływu na status zakończenia"
+
+#: src/xz/message.c:1220
+msgid "      --robot         use machine-parsable messages (useful for scripts)"
+msgstr "      --robot         komunikaty w formacie dla maszyny (do skryptów)"
+
+#: src/xz/message.c:1223
+msgid ""
+"      --info-memory   display the total amount of RAM and the currently active\n"
+"                      memory usage limits, and exit"
+msgstr ""
+"      --info-memory   wyświetlenie całkowitej ilości pamięci RAM oraz aktualnie\n"
+"                      aktywnych limitów pamięci i zakończenie pracy"
+
+#: src/xz/message.c:1226
+msgid ""
+"  -h, --help          display the short help (lists only the basic options)\n"
+"  -H, --long-help     display this long help and exit"
+msgstr ""
+"  -h, --help          wyświetlenie krótkiego opisu (tylko podstawowe opcje)\n"
+"  -H, --long-help     wyświetlenie tego długiego opisu i zakończenie"
+
+#: src/xz/message.c:1230
+msgid ""
+"  -h, --help          display this short help and exit\n"
+"  -H, --long-help     display the long help (lists also the advanced options)"
+msgstr ""
+"  -h, --help          wyświetlenie tego krótkiego opisu i zakończenie\n"
+"  -H, --long-help     wyświetlenie długiego opisu (także opcje zaawansowane)"
+
+#: src/xz/message.c:1235
+msgid "  -V, --version       display the version number and exit"
+msgstr "  -V, --version       wyświetlenie informacji o wersji i zakończenie"
+
+#: src/xz/message.c:1237
+msgid ""
+"\n"
+"With no FILE, or when FILE is -, read standard input.\n"
+msgstr ""
+"\n"
+"Jeśli nie podano PLIKU lub PLIK to -, czytane jest standardowe wejście.\n"
+
+#. TRANSLATORS: This message indicates the bug reporting address
+#. for this package. Please add _another line_ saying
+#. "Report translation bugs to <...>\n" with the email or WWW
+#. address for translation bugs. Thanks.
+#: src/xz/message.c:1243
+#, c-format
+msgid "Report bugs to <%s> (in English or Finnish).\n"
+msgstr ""
+"Błędy prosimy zgłaszać na adres <%s>\n"
+"(w języku angielskim lub fińskim).\n"
+"Błędy w tłumaczeniu prosimy zgłaszać na adres\n"
+"<translation-team-pl@lists.sourceforge.net>.\n"
+
+#: src/xz/message.c:1245
+#, c-format
+msgid "%s home page: <%s>\n"
+msgstr "Strona domowa %s: <%s>\n"
+
+#: src/xz/options.c:86
+#, c-format
+msgid "%s: Options must be `name=value' pairs separated with commas"
+msgstr "%s: Opcje muszą być parami `nazwa=wartość' rozdzielonymi przecinkami"
+
+#: src/xz/options.c:93
+#, c-format
+msgid "%s: Invalid option name"
+msgstr "%s: Błędna nazwa opcji"
+
+#: src/xz/options.c:113
+#, c-format
+msgid "%s: Invalid option value"
+msgstr "%s: Błędna wartość opcji"
+
+#: src/xz/options.c:247
+#, c-format
+msgid "Unsupported LZMA1/LZMA2 preset: %s"
+msgstr "Nieobsługiwane ustawienie predefiniowane LZMA1/LZMA2: %s"
+
+#: src/xz/options.c:355
+msgid "The sum of lc and lp must not exceed 4"
+msgstr "Suma lc i lp nie może przekroczyć 4"
+
+#: src/xz/options.c:359
+#, c-format
+msgid "The selected match finder requires at least nice=%<PRIu32>"
+msgstr "Wybrany dopasowywacz wymaga przynajmniej nice=%<PRIu32>"
+
+#: src/xz/suffix.c:101 src/xz/suffix.c:194
+#, c-format
+msgid "%s: With --format=raw, --suffix=.SUF is required unless writing to stdout"
+msgstr "%s: Przy --format=raw i zapisie do pliku wymagana jest opcja --suffix=.ROZ"
+
+#: src/xz/suffix.c:121
+#, c-format
+msgid "%s: Filename has an unknown suffix, skipping"
+msgstr "%s: Nazwa pliku ma nieznane rozszerzenie, pominięto"
+
+#: src/xz/suffix.c:175 src/xz/suffix.c:184
+#, c-format
+msgid "%s: File already has `%s' suffix, skipping"
+msgstr "%s: Plik już ma rozszerzenie `%s', pominięto"
+
+#: src/xz/suffix.c:235
+#, c-format
+msgid "%s: Invalid filename suffix"
+msgstr "%s: Błędne rozszerzenie nazwy pliku"
+
+#: src/xz/util.c:61
+#, c-format
+msgid "%s: Value is not a non-negative decimal integer"
+msgstr "%s: Wartość nie jest nieujemną liczbą całkowitą"
+
+#: src/xz/util.c:103
+#, c-format
+msgid "%s: Invalid multiplier suffix"
+msgstr "%s: Błędny przyrostek mnożnika"
+
+#: src/xz/util.c:105
+msgid "Valid suffixes are `KiB' (2^10), `MiB' (2^20), and `GiB' (2^30)."
+msgstr "Poprawne przyrostki to `KiB' (2^10), `MiB' (2^20) i `GiB' (2^30)."
+
+#: src/xz/util.c:122
+#, c-format
+msgid "Value of the option `%s' must be in the range [%<PRIu64>, %<PRIu64>]"
+msgstr "Wartość opcji `%s' musi być w przedziale [%<PRIu64>, %<PRIu64>]"
+
+#: src/xz/util.c:247
+msgid "Empty filename, skipping"
+msgstr "Pusta nazwa pliku, pominięto"
+
+#: src/xz/util.c:261
+msgid "Compressed data cannot be read from a terminal"
+msgstr "Dane skompresowane nie mogą być czytane z terminala"
+
+#: src/xz/util.c:274
+msgid "Compressed data cannot be written to a terminal"
+msgstr "Dane skompresowane nie mogą być zapisywane na terminal"
+
+#: src/common/tuklib_exit.c:39
+msgid "Writing to standard output failed"
+msgstr "Zapis na standardowe wyjście nie powiódł się"
+
+#: src/common/tuklib_exit.c:42
+msgid "Unknown error"
+msgstr "Nieznany błąd"

src/common/sysdefs.h

@@ -103,9 +103,12 @@
 #	define UINT64_MAX UINT64_C(18446744073709551615)
 #endif
 
-// Interix has broken header files, which typedef size_t to unsigned long,
+// Incorrect(?) SIZE_MAX:
+//   - Interix headers typedef size_t to unsigned long,
 //     but a few lines later define SIZE_MAX to INT32_MAX.
-#ifdef __INTERIX
+//   - SCO OpenServer (x86) headers typedef size_t to unsigned int
+//     but define SIZE_MAX to INT32_MAX.
+#if defined(__INTERIX) || defined(_SCO_DS)
 #	undef SIZE_MAX
 #endif
 

src/common/tuklib_open_stdxxx.c

@@ -39,12 +39,14 @@ tuklib_open_stdxxx(int err_status)
 					| (i == 0 ? O_WRONLY : O_RDONLY));
 
 			if (fd != i) {
+				if (fd != -1)
+					(void)close(fd);
+
 				// Something went wrong. Exit with the
 				// exit status we were given. Don't try
 				// to print an error message, since stderr
 				// may very well be non-existent. This
 				// error should be extremely rare.
-				(void)close(fd);
 				exit(err_status);
 			}
 		}

src/common/tuklib_physmem.c

@@ -33,6 +33,10 @@
 #	include <syidef.h>
 #	include <ssdef.h>
 
+#elif defined(AMIGA) || defined(__AROS__)
+#	define __USE_INLINE__
+#	include <proto/exec.h>
+
 // AIX
 #elif defined(TUKLIB_PHYSMEM_AIX)
 #	include <sys/systemcfg.h>
@@ -119,6 +123,9 @@ tuklib_physmem(void)
 	if (LIB$GETSYI(&val, &vms_mem, 0, 0, 0, 0) == SS$_NORMAL)
 		ret = (uint64_t)vms_mem * 8192;
 
+#elif defined(AMIGA) || defined(__AROS__)
+	ret = AvailMem(MEMF_TOTAL);
+
 #elif defined(TUKLIB_PHYSMEM_AIX)
 	ret = _system_configuration.physmem;
 

src/liblzma/Makefile.am

@@ -24,7 +24,7 @@ liblzma_la_CPPFLAGS = \
 	-I$(top_srcdir)/src/liblzma/simple \
 	-I$(top_srcdir)/src/common \
 	-DTUKLIB_SYMBOL_PREFIX=lzma_
-liblzma_la_LDFLAGS = -no-undefined -version-info 5:0:0
+liblzma_la_LDFLAGS = -no-undefined -version-info 5:8:0
 
 include $(srcdir)/common/Makefile.inc
 include $(srcdir)/check/Makefile.inc
@@ -88,3 +88,23 @@ endif
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = liblzma.pc
 EXTRA_DIST += liblzma.pc.in
+
+pc_verbose = $(pc_verbose_@AM_V@)
+pc_verbose_ = $(pc_verbose_@AM_DEFAULT_V@)
+pc_verbose_0 = @echo "  PC      " $@;
+
+liblzma.pc: $(srcdir)/liblzma.pc.in
+	$(AM_V_at)rm -f $@
+	$(pc_verbose)sed \
+		-e 's,@prefix[@],$(prefix),g' \
+		-e 's,@exec_prefix[@],$(exec_prefix),g' \
+		-e 's,@libdir[@],$(libdir),g' \
+		-e 's,@includedir[@],$(includedir),g' \
+		-e 's,@PACKAGE_URL[@],$(PACKAGE_URL),g' \
+		-e 's,@PACKAGE_VERSION[@],$(PACKAGE_VERSION),g' \
+		-e 's,@PTHREAD_CFLAGS[@],$(PTHREAD_CFLAGS),g' \
+		-e 's,@PTHREAD_LIBS[@],$(PTHREAD_LIBS),g' \
+		< $(srcdir)/liblzma.pc.in > $@ || { rm -f $@; exit 1; }
+
+clean-local:
+	rm -f liblzma.pc

src/liblzma/api/lzma/block.h

@@ -318,6 +318,9 @@ extern LZMA_API(lzma_ret) lzma_block_header_encode(
  * The size of the Block Header must have already been decoded with
  * lzma_block_header_size_decode() macro and stored to block->header_size.
  *
+ * The integrity check type from Stream Header must have been stored
+ * to block->check.
+ *
  * block->filters must have been allocated, but they don't need to be
  * initialized (possible existing filter options are not freed).
  *
@@ -483,6 +486,7 @@ extern LZMA_API(size_t) lzma_block_buffer_bound(size_t uncompressed_size)
  *
  * \return      - LZMA_OK: Encoding was successful.
  *              - LZMA_BUF_ERROR: Not enough output buffer space.
+ *              - LZMA_UNSUPPORTED_CHECK
  *              - LZMA_OPTIONS_ERROR
  *              - LZMA_MEM_ERROR
  *              - LZMA_DATA_ERROR

src/liblzma/api/lzma/container.h

@@ -66,6 +66,10 @@
  * This function is a wrapper for lzma_raw_encoder_memusage().
  *
  * \param       preset  Compression preset (level and possible flags)
+ *
+ * \return      Number of bytes of memory required for the given
+ *              preset when encoding. If an error occurs, for example
+ *              due to unsupported preset, UINT64_MAX is returned.
  */
 extern LZMA_API(uint64_t) lzma_easy_encoder_memusage(uint32_t preset)
 		lzma_nothrow lzma_attr_pure;
@@ -77,6 +81,11 @@ extern LZMA_API(uint64_t) lzma_easy_encoder_memusage(uint32_t preset)
  * This function is a wrapper for lzma_raw_decoder_memusage().
  *
  * \param       preset  Compression preset (level and possible flags)
+ *
+ * \return      Number of bytes of memory required to decompress a file
+ *              that was compressed using the given preset. If an error
+ *              occurs, for example due to unsupported preset, UINT64_MAX
+ *              is returned.
  */
 extern LZMA_API(uint64_t) lzma_easy_decoder_memusage(uint32_t preset)
 		lzma_nothrow lzma_attr_pure;
@@ -148,6 +157,7 @@ extern LZMA_API(lzma_ret) lzma_easy_encoder(
  *
  * \return      - LZMA_OK: Encoding was successful.
  *              - LZMA_BUF_ERROR: Not enough output buffer space.
+ *              - LZMA_UNSUPPORTED_CHECK
  *              - LZMA_OPTIONS_ERROR
  *              - LZMA_MEM_ERROR
  *              - LZMA_DATA_ERROR
@@ -171,6 +181,7 @@ extern LZMA_API(lzma_ret) lzma_easy_buffer_encode(
  *
  * \return      - LZMA_OK: Initialization was successful.
  *              - LZMA_MEM_ERROR
+ *              - LZMA_UNSUPPORTED_CHECK
  *              - LZMA_OPTIONS_ERROR
  *              - LZMA_PROG_ERROR
  */
@@ -250,6 +261,7 @@ extern LZMA_API(size_t) lzma_stream_buffer_bound(size_t uncompressed_size)
  *
  * \return      - LZMA_OK: Encoding was successful.
  *              - LZMA_BUF_ERROR: Not enough output buffer space.
+ *              - LZMA_UNSUPPORTED_CHECK
  *              - LZMA_OPTIONS_ERROR
  *              - LZMA_MEM_ERROR
  *              - LZMA_DATA_ERROR

src/liblzma/api/lzma/filter.h

@@ -131,7 +131,9 @@ extern LZMA_API(lzma_ret) lzma_filters_copy(const lzma_filter *src,
  *                          .id == LZMA_VLI_UNKNOWN.
  *
  * \return      Number of bytes of memory required for the given
- *              filter chain when encoding.
+ *              filter chain when encoding. If an error occurs,
+ *              for example due to unsupported filter chain,
+ *              UINT64_MAX is returned.
  */
 extern LZMA_API(uint64_t) lzma_raw_encoder_memusage(const lzma_filter *filters)
 		lzma_nothrow lzma_attr_pure;
@@ -148,7 +150,9 @@ extern LZMA_API(uint64_t) lzma_raw_encoder_memusage(const lzma_filter *filters)
  *                          .id == LZMA_VLI_UNKNOWN.
  *
  * \return      Number of bytes of memory required for the given
- *              filter chain when decoding.
+ *              filter chain when decoding. If an error occurs,
+ *              for example due to unsupported filter chain,
+ *              UINT64_MAX is returned.
  */
 extern LZMA_API(uint64_t) lzma_raw_decoder_memusage(const lzma_filter *filters)
 		lzma_nothrow lzma_attr_pure;

src/liblzma/api/lzma/version.h

@@ -22,7 +22,7 @@
  */
 #define LZMA_VERSION_MAJOR 5
 #define LZMA_VERSION_MINOR 0
-#define LZMA_VERSION_PATCH 0
+#define LZMA_VERSION_PATCH 8
 #define LZMA_VERSION_STABILITY LZMA_VERSION_STABILITY_STABLE
 
 #ifndef LZMA_VERSION_COMMIT

src/liblzma/check/crc32_fast.c

@@ -20,7 +20,7 @@
 #include "crc_macros.h"
 
 
-// If you make any changes, do some bench marking! Seemingly unrelated
+// If you make any changes, do some benchmarking! Seemingly unrelated
 // changes can very easily ruin the performance (and very probably is
 // very compiler dependent).
 extern LZMA_API(uint32_t)

src/liblzma/check/sha256.c

@@ -6,7 +6,6 @@
 /// \todo       Crypto++ has x86 ASM optimizations. They use SSE so if they
 ///             are imported to liblzma, SSE instructions need to be used
 ///             conditionally to keep the code working on older boxes.
-///             We could also support using some external libary for SHA-256.
 //
 //  This code is based on the code found from 7-Zip, which has a modified
 //  version of the SHA-256 found from Crypto++ <http://www.cryptopp.com/>.
@@ -81,7 +80,7 @@ static const uint32_t SHA256_K[64] = {
 
 
 static void
-transform(uint32_t state[static 8], const uint32_t data[static 16])
+transform(uint32_t state[8], const uint32_t data[16])
 {
 	uint32_t W[16];
 	uint32_t T[8];

src/liblzma/common/alone_decoder.c

@@ -26,6 +26,11 @@ struct lzma_coder_s {
 		SEQ_CODE,
 	} sequence;
 
+	/// If true, reject files that are unlikely to be .lzma files.
+	/// If false, more non-.lzma files get accepted and will give
+	/// LZMA_DATA_ERROR either immediately or after a few output bytes.
+	bool picky;
+
 	/// Position in the header fields
 	size_t pos;
 
@@ -46,7 +51,7 @@ struct lzma_coder_s {
 
 static lzma_ret
 alone_decode(lzma_coder *coder,
-		lzma_allocator *allocator lzma_attribute((unused)),
+		lzma_allocator *allocator lzma_attribute((__unused__)),
 		const uint8_t *restrict in, size_t *restrict in_pos,
 		size_t in_size, uint8_t *restrict out,
 		size_t *restrict out_pos, size_t out_size,
@@ -68,13 +73,13 @@ alone_decode(lzma_coder *coder,
 				|= (size_t)(in[*in_pos]) << (coder->pos * 8);
 
 		if (++coder->pos == 4) {
-			if (coder->options.dict_size != UINT32_MAX) {
+			if (coder->picky && coder->options.dict_size
+					!= UINT32_MAX) {
 				// A hack to ditch tons of false positives:
 				// We allow only dictionary sizes that are
 				// 2^n or 2^n + 2^(n-1). LZMA_Alone created
 				// only files with 2^n, but accepts any
-				// dictionary size. If someone complains, this
-				// will be reconsidered.
+				// dictionary size.
 				uint32_t d = coder->options.dict_size - 1;
 				d |= d >> 2;
 				d |= d >> 3;
@@ -103,9 +108,9 @@ alone_decode(lzma_coder *coder,
 
 		// Another hack to ditch false positives: Assume that
 		// if the uncompressed size is known, it must be less
-		// than 256 GiB. Again, if someone complains, this
-		// will be reconsidered.
-		if (coder->uncompressed_size != LZMA_VLI_UNKNOWN
+		// than 256 GiB.
+		if (coder->picky
+				&& coder->uncompressed_size != LZMA_VLI_UNKNOWN
 				&& coder->uncompressed_size
 					>= (LZMA_VLI_C(1) << 38))
 			return LZMA_FORMAT_ERROR;
@@ -189,7 +194,7 @@ alone_decoder_memconfig(lzma_coder *coder, uint64_t *memusage,
 
 extern lzma_ret
 lzma_alone_decoder_init(lzma_next_coder *next, lzma_allocator *allocator,
-		uint64_t memlimit)
+		uint64_t memlimit, bool picky)
 {
 	lzma_next_coder_init(&lzma_alone_decoder_init, next, allocator);
 
@@ -208,6 +213,7 @@ lzma_alone_decoder_init(lzma_next_coder *next, lzma_allocator *allocator,
 	}
 
 	next->coder->sequence = SEQ_PROPERTIES;
+	next->coder->picky = picky;
 	next->coder->pos = 0;
 	next->coder->options.dict_size = 0;
 	next->coder->options.preset_dict = NULL;
@@ -223,7 +229,7 @@ lzma_alone_decoder_init(lzma_next_coder *next, lzma_allocator *allocator,
 extern LZMA_API(lzma_ret)
 lzma_alone_decoder(lzma_stream *strm, uint64_t memlimit)
 {
-	lzma_next_strm_init(lzma_alone_decoder_init, strm, memlimit);
+	lzma_next_strm_init(lzma_alone_decoder_init, strm, memlimit, false);
 
 	strm->internal->supported_actions[LZMA_RUN] = true;
 	strm->internal->supported_actions[LZMA_FINISH] = true;

src/liblzma/common/alone_decoder.h

@@ -16,7 +16,8 @@
 #include "common.h"
 
 
-extern lzma_ret lzma_alone_decoder_init(lzma_next_coder *next,
-		lzma_allocator *allocator, uint64_t memlimit);
+extern lzma_ret lzma_alone_decoder_init(
+		lzma_next_coder *next, lzma_allocator *allocator,
+		uint64_t memlimit, bool picky);
 
 #endif

src/liblzma/common/alone_encoder.c

@@ -32,7 +32,7 @@ struct lzma_coder_s {
 
 static lzma_ret
 alone_encode(lzma_coder *coder,
-		lzma_allocator *allocator lzma_attribute((unused)),
+		lzma_allocator *allocator lzma_attribute((__unused__)),
 		const uint8_t *restrict in, size_t *restrict in_pos,
 		size_t in_size, uint8_t *restrict out,
 		size_t *restrict out_pos, size_t out_size,
@@ -103,7 +103,7 @@ alone_encoder_init(lzma_next_coder *next, lzma_allocator *allocator,
 	if (options->dict_size < LZMA_DICT_SIZE_MIN)
 		return LZMA_OPTIONS_ERROR;
 
-	// Round up to to the next 2^n or 2^n + 2^(n - 1) depending on which
+	// Round up to the next 2^n or 2^n + 2^(n - 1) depending on which
 	// one is the next unless it is UINT32_MAX. While the header would
 	// allow any 32-bit integer, we do this to keep the decoder of liblzma
 	// accepting the resulting files.

src/liblzma/common/auto_decoder.c

@@ -54,7 +54,7 @@ auto_decode(lzma_coder *coder, lzma_allocator *allocator,
 					coder->memlimit, coder->flags));
 		} else {
 			return_if_error(lzma_alone_decoder_init(&coder->next,
-					allocator, coder->memlimit));
+					allocator, coder->memlimit, true));
 
 			// If the application wants to know about missing
 			// integrity check or about the check in general, we

src/liblzma/common/block_buffer_encoder.c

@@ -226,16 +226,23 @@ lzma_block_buffer_encode(lzma_block *block, lzma_allocator *allocator,
 		const uint8_t *in, size_t in_size,
 		uint8_t *out, size_t *out_pos, size_t out_size)
 {
-	// Sanity checks
-	if (block == NULL || block->filters == NULL
-			|| (in == NULL && in_size != 0) || out == NULL
+	// Validate the arguments.
+	if (block == NULL || (in == NULL && in_size != 0) || out == NULL
 			|| out_pos == NULL || *out_pos > out_size)
 		return LZMA_PROG_ERROR;
 
-	// Check the version field.
+	// The contents of the structure may depend on the version so
+	// check the version before validating the contents of *block.
 	if (block->version != 0)
 		return LZMA_OPTIONS_ERROR;
 
+	if ((unsigned int)(block->check) > LZMA_CHECK_ID_MAX
+			|| block->filters == NULL)
+		return LZMA_PROG_ERROR;
+
+	if (!lzma_check_is_supported(block->check))
+		return LZMA_UNSUPPORTED_CHECK;
+
 	// Size of a Block has to be a multiple of four, so limit the size
 	// here already. This way we don't need to check it again when adding
 	// Block Padding.
@@ -243,8 +250,7 @@ lzma_block_buffer_encode(lzma_block *block, lzma_allocator *allocator,
 
 	// Get the size of the Check field.
 	const size_t check_size = lzma_check_size(block->check);
-	if (check_size == UINT32_MAX)
-		return LZMA_PROG_ERROR;
+	assert(check_size != UINT32_MAX);
 
 	// Reserve space for the Check field.
 	if (out_size - *out_pos <= check_size)

src/liblzma/common/block_encoder.c

@@ -144,7 +144,7 @@ block_encoder_end(lzma_coder *coder, lzma_allocator *allocator)
 
 static lzma_ret
 block_encoder_update(lzma_coder *coder, lzma_allocator *allocator,
-		const lzma_filter *filters lzma_attribute((unused)),
+		const lzma_filter *filters lzma_attribute((__unused__)),
 		const lzma_filter *reversed_filters)
 {
 	if (coder->sequence != SEQ_CODE)
@@ -161,6 +161,11 @@ lzma_block_encoder_init(lzma_next_coder *next, lzma_allocator *allocator,
 {
 	lzma_next_coder_init(&lzma_block_encoder_init, next, allocator);
 
+	if (block == NULL)
+		return LZMA_PROG_ERROR;
+
+	// The contents of the structure may depend on the version so
+	// check the version first.
 	if (block->version != 0)
 		return LZMA_OPTIONS_ERROR;
 

src/liblzma/common/common.c

@@ -35,7 +35,7 @@ lzma_version_string(void)
 // Memory allocation //
 ///////////////////////
 
-extern void * lzma_attribute((malloc))
+extern void * lzma_attribute((__malloc__)) lzma_attr_alloc_size(1)
 lzma_alloc(size_t size, lzma_allocator *allocator)
 {
 	// Some malloc() variants return NULL if called with size == 0.

src/liblzma/common/common.h

@@ -205,7 +205,7 @@ struct lzma_internal_s {
 
 /// Allocates memory
 extern void *lzma_alloc(size_t size, lzma_allocator *allocator)
-		lzma_attribute((malloc)) lzma_attr_alloc_size(1);
+		lzma_attribute((__malloc__)) lzma_attr_alloc_size(1);
 
 /// Frees memory
 extern void lzma_free(void *ptr, lzma_allocator *allocator);

src/liblzma/common/filter_common.c

@@ -43,7 +43,7 @@ static const struct {
 		.changes_size = true,
 	},
 #endif
-#ifdef HAVE_DECODER_LZMA2
+#if defined(HAVE_ENCODER_LZMA2) || defined(HAVE_DECODER_LZMA2)
 	{
 		.id = LZMA_FILTER_LZMA2,
 		.options_size = sizeof(lzma_options_lzma),
@@ -52,7 +52,7 @@ static const struct {
 		.changes_size = true,
 	},
 #endif
-#ifdef HAVE_DECODER_X86
+#if defined(HAVE_ENCODER_X86) || defined(HAVE_DECODER_X86)
 	{
 		.id = LZMA_FILTER_X86,
 		.options_size = sizeof(lzma_options_bcj),
@@ -70,7 +70,7 @@ static const struct {
 		.changes_size = false,
 	},
 #endif
-#ifdef HAVE_DECODER_IA64
+#if defined(HAVE_ENCODER_IA64) || defined(HAVE_DECODER_IA64)
 	{
 		.id = LZMA_FILTER_IA64,
 		.options_size = sizeof(lzma_options_bcj),

src/liblzma/common/index.c

@@ -398,10 +398,13 @@ extern LZMA_API(lzma_index *)
 lzma_index_init(lzma_allocator *allocator)
 {
 	lzma_index *i = index_init_plain(allocator);
+	if (i == NULL)
+		return NULL;
+
 	index_stream *s = index_stream_init(0, 0, 1, 0, allocator);
-	if (i == NULL || s == NULL) {
-		index_stream_end(s, allocator);
+	if (s == NULL) {
 		lzma_free(i, allocator);
+		return NULL;
 	}
 
 	index_tree_append(&i->streams, &s->node);

src/liblzma/common/index_decoder.c

@@ -56,10 +56,11 @@ struct lzma_coder_s {
 static lzma_ret
 index_decode(lzma_coder *coder, lzma_allocator *allocator,
 		const uint8_t *restrict in, size_t *restrict in_pos,
-		size_t in_size, uint8_t *restrict out lzma_attribute((unused)),
-		size_t *restrict out_pos lzma_attribute((unused)),
-		size_t out_size lzma_attribute((unused)),
-		lzma_action action lzma_attribute((unused)))
+		size_t in_size,
+		uint8_t *restrict out lzma_attribute((__unused__)),
+		size_t *restrict out_pos lzma_attribute((__unused__)),
+		size_t out_size lzma_attribute((__unused__)),
+		lzma_action action lzma_attribute((__unused__)))
 {
 	// Similar optimization as in index_encoder.c
 	const size_t in_start = *in_pos;

src/liblzma/common/index_encoder.c

@@ -42,12 +42,13 @@ struct lzma_coder_s {
 
 static lzma_ret
 index_encode(lzma_coder *coder,
-		lzma_allocator *allocator lzma_attribute((unused)),
-		const uint8_t *restrict in lzma_attribute((unused)),
-		size_t *restrict in_pos lzma_attribute((unused)),
-		size_t in_size lzma_attribute((unused)),
+		lzma_allocator *allocator lzma_attribute((__unused__)),
+		const uint8_t *restrict in lzma_attribute((__unused__)),
+		size_t *restrict in_pos lzma_attribute((__unused__)),
+		size_t in_size lzma_attribute((__unused__)),
 		uint8_t *restrict out, size_t *restrict out_pos,
-		size_t out_size, lzma_action action lzma_attribute((unused)))
+		size_t out_size,
+		lzma_action action lzma_attribute((__unused__)))
 {
 	// Position where to start calculating CRC32. The idea is that we
 	// need to call lzma_crc32() only once per call to index_encode().

src/liblzma/common/stream_buffer_encoder.c

@@ -51,6 +51,9 @@ lzma_stream_buffer_encode(lzma_filter *filters, lzma_check check,
 			|| out_pos_ptr == NULL || *out_pos_ptr > out_size)
 		return LZMA_PROG_ERROR;
 
+	if (!lzma_check_is_supported(check))
+		return LZMA_UNSUPPORTED_CHECK;
+
 	// Note for the paranoids: Index encoder prevents the Stream from
 	// getting too big and still being accepted with LZMA_OK, and Block
 	// encoder catches if the input is too big. So we don't need to
@@ -81,24 +84,30 @@ lzma_stream_buffer_encode(lzma_filter *filters, lzma_check check,
 
 	out_pos += LZMA_STREAM_HEADER_SIZE;
 
-	// Block
+	// Encode a Block but only if there is at least one byte of input.
 	lzma_block block = {
 		.version = 0,
 		.check = check,
 		.filters = filters,
 	};
 
+	if (in_size > 0)
 		return_if_error(lzma_block_buffer_encode(&block, allocator,
 				in, in_size, out, &out_pos, out_size));
 
 	// Index
 	{
-		// Create an Index with one Record.
+		// Create an Index. It will have one Record if there was
+		// at least one byte of input to encode. Otherwise the
+		// Index will be empty.
 		lzma_index *i = lzma_index_init(allocator);
 		if (i == NULL)
 			return LZMA_MEM_ERROR;
 
-		lzma_ret ret = lzma_index_append(i, allocator,
+		lzma_ret ret = LZMA_OK;
+
+		if (in_size > 0)
+			ret = lzma_index_append(i, allocator,
 					lzma_block_unpadded_size(&block),
 					block.uncompressed_size);
 

src/liblzma/common/stream_encoder.c

@@ -280,6 +280,7 @@ lzma_stream_encoder_init(lzma_next_coder *next, lzma_allocator *allocator,
 		next->end = &stream_encoder_end;
 		next->update = &stream_encoder_update;
 
+		next->coder->filters[0].id = LZMA_VLI_UNKNOWN;
 		next->coder->block_encoder = LZMA_NEXT_CODER_INIT;
 		next->coder->index_encoder = LZMA_NEXT_CODER_INIT;
 		next->coder->index = NULL;
@@ -289,7 +290,6 @@ lzma_stream_encoder_init(lzma_next_coder *next, lzma_allocator *allocator,
 	next->coder->sequence = SEQ_STREAM_HEADER;
 	next->coder->block_options.version = 0;
 	next->coder->block_options.check = check;
-	next->coder->filters[0].id = LZMA_VLI_UNKNOWN;
 
 	// Initialize the Index
 	lzma_index_end(next->coder->index, allocator);

src/liblzma/delta/delta_encoder.c

@@ -85,7 +85,7 @@ delta_encode(lzma_coder *coder, lzma_allocator *allocator,
 
 static lzma_ret
 delta_encoder_update(lzma_coder *coder, lzma_allocator *allocator,
-		const lzma_filter *filters_null lzma_attribute((unused)),
+		const lzma_filter *filters_null lzma_attribute((__unused__)),
 		const lzma_filter *reversed_filters)
 {
 	// Delta doesn't and will never support changing the options in

src/liblzma/lz/lz_decoder.c

@@ -126,7 +126,7 @@ decode_buffer(lzma_coder *coder,
 
 static lzma_ret
 lz_decode(lzma_coder *coder,
-		lzma_allocator *allocator lzma_attribute((unused)),
+		lzma_allocator *allocator lzma_attribute((__unused__)),
 		const uint8_t *restrict in, size_t *restrict in_pos,
 		size_t in_size, uint8_t *restrict out,
 		size_t *restrict out_pos, size_t out_size,

src/liblzma/lz/lz_encoder.c

@@ -480,7 +480,7 @@ lz_encoder_end(lzma_coder *coder, lzma_allocator *allocator)
 
 static lzma_ret
 lz_encoder_update(lzma_coder *coder, lzma_allocator *allocator,
-		const lzma_filter *filters_null lzma_attribute((unused)),
+		const lzma_filter *filters_null lzma_attribute((__unused__)),
 		const lzma_filter *reversed_filters)
 {
 	if (coder->lz.options_update == NULL)

src/liblzma/lz/lz_encoder_hash.h

@@ -39,7 +39,7 @@
 // Endianness doesn't matter in hash_2_calc() (no effect on the output).
 #ifdef TUKLIB_FAST_UNALIGNED_ACCESS
 #	define hash_2_calc() \
-		const uint32_t hash_value = *(const uint16_t *)(cur);
+		const uint32_t hash_value = *(const uint16_t *)(cur)
 #else
 #	define hash_2_calc() \
 		const uint32_t hash_value \

src/liblzma/lzma/lzma2_decoder.c

@@ -67,6 +67,10 @@ lzma2_decode(lzma_coder *restrict coder, lzma_dict *restrict dict,
 		const uint32_t control = in[*in_pos];
 		++*in_pos;
 
+		// End marker
+		if (control == 0x00)
+			return LZMA_STREAM_END;
+
 		if (control >= 0xE0 || control == 1) {
 			// Dictionary reset implies that next LZMA chunk has
 			// to set new properties.
@@ -104,10 +108,6 @@ lzma2_decode(lzma_coder *restrict coder, lzma_dict *restrict dict,
 							&coder->options);
 			}
 		} else {
-			// End marker
-			if (control == 0x00)
-				return LZMA_STREAM_END;
-
 			// Invalid control values
 			if (control > 2)
 				return LZMA_DATA_ERROR;

src/liblzma/lzma/lzma2_encoder.c

@@ -374,7 +374,7 @@ lzma_lzma2_props_encode(const void *options, uint8_t *out)
 	const lzma_options_lzma *const opt = options;
 	uint32_t d = my_max(opt->dict_size, LZMA_DICT_SIZE_MIN);
 
-	// Round up to to the next 2^n - 1 or 2^n + 2^(n - 1) - 1 depending
+	// Round up to the next 2^n - 1 or 2^n + 2^(n - 1) - 1 depending
 	// on which one is the next:
 	--d;
 	d |= d >> 2;

src/liblzma/lzma/lzma_encoder_presets.c

@@ -30,14 +30,16 @@ lzma_lzma_preset(lzma_options_lzma *options, uint32_t preset)
 	options->lp = LZMA_LP_DEFAULT;
 	options->pb = LZMA_PB_DEFAULT;
 
-	options->dict_size = UINT32_C(1) << (uint8_t []){
-			18, 20, 21, 22, 22, 23, 23, 24, 25, 26 }[level];
+	static const uint8_t dict_pow2[]
+			= { 18, 20, 21, 22, 22, 23, 23, 24, 25, 26 };
+	options->dict_size = UINT32_C(1) << dict_pow2[level];
 
 	if (level <= 3) {
 		options->mode = LZMA_MODE_FAST;
 		options->mf = level == 0 ? LZMA_MF_HC3 : LZMA_MF_HC4;
 		options->nice_len = level <= 1 ? 128 : 273;
-		options->depth = (uint8_t []){ 4, 8, 24, 48 }[level];
+		static const uint8_t depths[] = { 4, 8, 24, 48 };
+		options->depth = depths[level];
 	} else {
 		options->mode = LZMA_MODE_NORMAL;
 		options->mf = LZMA_MF_BT4;

src/liblzma/simple/arm.c

@@ -15,7 +15,7 @@
 
 
 static size_t
-arm_code(lzma_simple *simple lzma_attribute((unused)),
+arm_code(lzma_simple *simple lzma_attribute((__unused__)),
 		uint32_t now_pos, bool is_encoder,
 		uint8_t *buffer, size_t size)
 {

src/liblzma/simple/armthumb.c

@@ -15,7 +15,7 @@
 
 
 static size_t
-armthumb_code(lzma_simple *simple lzma_attribute((unused)),
+armthumb_code(lzma_simple *simple lzma_attribute((__unused__)),
 		uint32_t now_pos, bool is_encoder,
 		uint8_t *buffer, size_t size)
 {

src/liblzma/simple/ia64.c

@@ -15,7 +15,7 @@
 
 
 static size_t
-ia64_code(lzma_simple *simple lzma_attribute((unused)),
+ia64_code(lzma_simple *simple lzma_attribute((__unused__)),
 		uint32_t now_pos, bool is_encoder,
 		uint8_t *buffer, size_t size)
 {

src/liblzma/simple/powerpc.c

@@ -15,7 +15,7 @@
 
 
 static size_t
-powerpc_code(lzma_simple *simple lzma_attribute((unused)),
+powerpc_code(lzma_simple *simple lzma_attribute((__unused__)),
 		uint32_t now_pos, bool is_encoder,
 		uint8_t *buffer, size_t size)
 {

src/liblzma/simple/simple_coder.c

@@ -35,9 +35,6 @@ copy_or_code(lzma_coder *coder, lzma_allocator *allocator,
 
 	} else {
 		// Call the next coder in the chain to provide us some data.
-		// We don't care about uncompressed_size here, because
-		// the next filter in the chain will do it for us (since
-		// we don't change the size of the data).
 		const lzma_ret ret = coder->next.code(
 				coder->next.coder, allocator,
 				in, in_pos, in_size,
@@ -110,7 +107,7 @@ simple_code(lzma_coder *coder, lzma_allocator *allocator,
 	// filtered if the buffer sizes used by the application are reasonable.
 	const size_t out_avail = out_size - *out_pos;
 	const size_t buf_avail = coder->size - coder->pos;
-	if (out_avail > buf_avail) {
+	if (out_avail > buf_avail || buf_avail == 0) {
 		// Store the old position so that we know from which byte
 		// to start filtering.
 		const size_t out_start = *out_pos;
@@ -212,7 +209,7 @@ simple_coder_end(lzma_coder *coder, lzma_allocator *allocator)
 
 static lzma_ret
 simple_coder_update(lzma_coder *coder, lzma_allocator *allocator,
-		const lzma_filter *filters_null lzma_attribute((unused)),
+		const lzma_filter *filters_null lzma_attribute((__unused__)),
 		const lzma_filter *reversed_filters)
 {
 	// No update support, just call the next filter in the chain.

src/liblzma/simple/simple_private.h

@@ -22,8 +22,7 @@ struct lzma_coder_s {
 	/// Next filter in the chain
 	lzma_next_coder next;
 
-	/// True if the next coder in the chain has returned LZMA_STREAM_END
-	/// or if we have processed uncompressed_size bytes.
+	/// True if the next coder in the chain has returned LZMA_STREAM_END.
 	bool end_was_reached;
 
 	/// True if filter() should encode the data; false to decode.

src/liblzma/simple/sparc.c

@@ -15,7 +15,7 @@
 
 
 static size_t
-sparc_code(lzma_simple *simple lzma_attribute((unused)),
+sparc_code(lzma_simple *simple lzma_attribute((__unused__)),
 		uint32_t now_pos, bool is_encoder,
 		uint8_t *buffer, size_t size)
 {

src/lzmainfo/lzmainfo.1

@@ -4,14 +4,14 @@
 .\" This file has been put into the public domain.
 .\" You can do whatever you want with this file.
 .\"
-.TH LZMAINFO 1 "2010-09-27" "Tukaani" "XZ Utils"
+.TH LZMAINFO 1 "2013-06-30" "Tukaani" "XZ Utils"
 .SH NAME
 lzmainfo \- show information stored in the .lzma file header
 .SH SYNOPSIS
 .B lzmainfo
 .RB [ \-\-help ]
 .RB [ \-\-version ]
-.RI [ file ]...
+.RI [ file... ]
 .SH DESCRIPTION
 .B lzmainfo
 shows information stored in the

src/lzmainfo/lzmainfo.c

@@ -26,7 +26,7 @@
 #endif
 
 
-static void lzma_attribute((noreturn))
+static void lzma_attribute((__noreturn__))
 help(void)
 {
 	printf(
@@ -45,7 +45,7 @@ _("Usage: %s [--help] [--version] [FILE]...\n"
 }
 
 
-static void lzma_attribute((noreturn))
+static void lzma_attribute((__noreturn__))
 version(void)
 {
 	puts("lzmainfo (" PACKAGE_NAME ") " LZMA_VERSION_STRING);

src/scripts/xzdiff.in

@@ -120,10 +120,12 @@ elif test $# -eq 2; then
                 ( ($xz2 -cdfq -- "$2" 4>&-; echo $? >&4) 3>&- 5<&- </dev/null |
                 eval "$cmp" /dev/fd/5 - >&3) 5<&0
             )
+            cmp_status=$?
             case $xz_status in
               *[1-9]*) xz_status=1;;
               *) xz_status=0;;
             esac
+            (exit $cmp_status)
           else
             F=`expr "/$2" : '.*/\(.*\)[-.][ablmtxz2]*$'` || F=$prog
             tmp=

src/scripts/xzgrep.in

@@ -27,7 +27,7 @@
 xz='@xz@ --format=auto'
 unset GZIP BZIP BZIP2
 
-case ${0##/*} in
+case ${0##*/} in
   *egrep*) prog=xzegrep; grep=${GREP:-egrep};;
   *fgrep*) prog=xzfgrep; grep=${GREP:-fgrep};;
   *)       prog=xzgrep; grep=${GREP:-grep};;
@@ -35,7 +35,7 @@ esac
 
 version="$prog (@PACKAGE_NAME@) @VERSION@"
 
-usage="Usage: ${0##/*} [OPTION]... [-e] PATTERN [FILE]...
+usage="Usage: ${0##*/} [OPTION]... [-e] PATTERN [FILE]...
 Look for instances of PATTERN in the input FILEs, using their
 uncompressed contents if they are compressed.
 
@@ -106,10 +106,12 @@ while test $# -ne 0; do
     with_filename=1
     continue;;
   (-l | --files-with-*)
-    files_with_matches=1;;
+    files_with_matches=1
+    continue;;
   (-L | --files-witho*)
-    files_without_matches=1;;
-  (--no-f*)
+    files_without_matches=1
+    continue;;
+  (-h | --no-f*)
     no_filename=1;;
   (-V | --v | --ve | --ver | --vers | --versi | --versio | --version)
     echo "$version" || exit 2
@@ -126,6 +128,10 @@ while test $# -ne 0; do
   grep="$grep $option$optarg"
 done
 
+if test $files_with_matches -eq 1 || test $files_without_matches -eq 1; then
+  grep="$grep -q"
+fi
+
 eval "set -- $operands "'${1+"$@"}'
 
 if test $have_pat -eq 0; then
@@ -143,7 +149,9 @@ if test $# -eq 0; then
 fi
 
 exec 3>&1
-res=0
+
+# res=1 means that no file matched yet
+res=1
 
 for i; do
   case $i in
@@ -156,9 +164,9 @@ for i; do
     exec 5>&1
     ($uncompress -- "$i" 5>&-; echo $? >&5) 3>&- |
     if test $files_with_matches -eq 1; then
-      eval "$grep" -q && { printf '%s\n' "$i" || exit 2; }
+      eval "$grep" && { printf '%s\n' "$i" || exit 2; }
     elif test $files_without_matches -eq 1; then
-      eval "$grep" -q || {
+      eval "$grep" || {
         r=$?
         if test $r -eq 1; then
           printf '%s\n' "$i" || r=2
@@ -190,7 +198,17 @@ for i; do
     fi >&3 5>&-
   )
   r=$?
-  test "$xz_status" -eq 0 || test "$xz_status" -eq 2 || r=2
-  test $res -lt $r && res=$r
+
+  # fail occured previously, nothing worse can happen
+  test $res -gt 1 && continue
+
+  test "$xz_status" -eq 0 || test "$xz_status" -eq 2 \
+      || test "$(kill -l "$xz_status" 2> /dev/null)" = "PIPE" || r=2
+
+  # still no match
+  test $r -eq 1 && continue
+
+  # 0 == match, >=2 == fail
+  res=$r
 done
 exit $res

src/scripts/xzless.in

@@ -46,7 +46,7 @@ if test "${LESSMETACHARS+set}" != set; then
 	LESSMETACHARS="$space$tab$nl'"';*?"()<>[|&^`#\$%=~'
 fi
 
-if test "$(less -V | { read ver && echo ${ver#less }; })" -ge 429; then
+if test "$(less -V | { read less ver re && echo ${ver}; })" -ge 429; then
 	# less 429 or later: LESSOPEN pipe will be used on
 	# standard input if $LESSOPEN begins with |-.
 	LESSOPEN="|-$xz -cdfq -- %s"

src/scripts/xzmore.1

@@ -4,15 +4,15 @@
 .\"
 .\" License: GNU GPLv2+
 .\"
-.TH XZMORE 1 "2010-09-27" "Tukaani" "XZ Utils"
+.TH XZMORE 1 "2013-06-30" "Tukaani" "XZ Utils"
 .SH NAME
 xzmore, lzmore \- view xz or lzma compressed (text) files
 .SH SYNOPSIS
 .B xzmore
-.RI [ "filename ..." ]
+.RI [ file... ]
 .br
 .B lzmore
-.RI [ "filename ..." ]
+.RI [ file... ]
 .SH DESCRIPTION
 .B  xzmore
 is a filter which allows examination of

src/xz/args.c

@@ -438,7 +438,7 @@ parse_environment(args_info *args, char *argv0, const char *varname)
 		} else if (prev_was_space) {
 			prev_was_space = false;
 
-			// Keep argc small enough to fit into a singed int
+			// Keep argc small enough to fit into a signed int
 			// and to keep it usable for memory allocation.
 			if (++argc == my_min(
 					INT_MAX, SIZE_MAX / sizeof(char *)))

src/xz/coder.c

@@ -37,15 +37,10 @@ static io_buf in_buf;
 static io_buf out_buf;
 
 /// Number of filters. Zero indicates that we are using a preset.
-static size_t filters_count = 0;
+static uint32_t filters_count = 0;
 
 /// Number of the preset (0-9)
-static size_t preset_number = 6;
-
-/// If a preset is used (no custom filter chain) and preset_extreme is true,
-/// a significantly slower compression is used to achieve slightly better
-/// compression ratio.
-static bool preset_extreme = false;
+static uint32_t preset_number = LZMA_PRESET_DEFAULT;
 
 /// Integrity check type
 static lzma_check check;
@@ -63,11 +58,9 @@ coder_set_check(lzma_check new_check)
 }
 
 
-extern void
-coder_set_preset(size_t new_preset)
+static void
+forget_filter_chain(void)
 {
-	preset_number = new_preset;
-
 	// Setting a preset makes us forget a possibly defined custom
 	// filter chain.
 	while (filters_count > 0) {
@@ -80,10 +73,21 @@ coder_set_preset(size_t new_preset)
 }
 
 
+extern void
+coder_set_preset(uint32_t new_preset)
+{
+	preset_number &= ~LZMA_PRESET_LEVEL_MASK;
+	preset_number |= new_preset;
+	forget_filter_chain();
+	return;
+}
+
+
 extern void
 coder_set_extreme(void)
 {
-	preset_extreme = true;
+	preset_number |= LZMA_PRESET_EXTREME;
+	forget_filter_chain();
 	return;
 }
 
@@ -98,11 +102,17 @@ coder_add_filter(lzma_vli id, void *options)
 	filters[filters_count].options = options;
 	++filters_count;
 
+	// Setting a custom filter chain makes us forget the preset options.
+	// This makes a difference if one specifies e.g. "xz -9 --lzma2 -e"
+	// where the custom filter chain resets the preset level back to
+	// the default 6, making the example equivalent to "xz -6e".
+	preset_number = LZMA_PRESET_DEFAULT;
+
 	return;
 }
 
 
-static void lzma_attribute((noreturn))
+static void lzma_attribute((__noreturn__))
 memlimit_too_small(uint64_t memory_usage)
 {
 	message(V_ERROR, _("Memory usage limit is too low for the given "
@@ -134,9 +144,6 @@ coder_set_compression_settings(void)
 		}
 
 		// Get the preset for LZMA1 or LZMA2.
-		if (preset_extreme)
-			preset_number |= LZMA_PRESET_EXTREME;
-
 		if (lzma_lzma_preset(&opt_lzma, preset_number))
 			message_bug();
 
@@ -193,9 +200,9 @@ coder_set_compression_settings(void)
 	}
 
 	if (memory_usage > memory_limit) {
-		// If --no-auto-adjust was used or we didn't find LZMA1 or
+		// If --no-adjust was used or we didn't find LZMA1 or
 		// LZMA2 as the last filter, give an error immediately.
-		// --format=raw implies --no-auto-adjust.
+		// --format=raw implies --no-adjust.
 		if (!opt_auto_adjust || opt_format == FORMAT_RAW)
 			memlimit_too_small(memory_usage);
 
@@ -284,7 +291,10 @@ coder_set_compression_settings(void)
 static bool
 is_format_xz(void)
 {
-	return strm.avail_in >= 6 && memcmp(in_buf.u8, "\3757zXZ", 6) == 0;
+	// Specify the magic as hex to be compatible with EBCDIC systems.
+	static const uint8_t magic[6] = { 0xFD, 0x37, 0x7A, 0x58, 0x5A, 0x00 };
+	return strm.avail_in >= sizeof(magic)
+			&& memcmp(in_buf.u8, magic, sizeof(magic)) == 0;
 }
 
 

src/xz/coder.h

@@ -46,7 +46,7 @@ extern bool opt_auto_adjust;
 extern void coder_set_check(lzma_check check);
 
 /// Set preset number
-extern void coder_set_preset(size_t new_preset);
+extern void coder_set_preset(uint32_t new_preset);
 
 /// Enable extreme mode
 extern void coder_set_extreme(void);

src/xz/file_io.c

@@ -41,9 +41,10 @@ static bool warn_fchown;
 static bool try_sparse = true;
 
 #ifndef TUKLIB_DOSLIKE
-/// File status flags of standard output. This is used by io_open_dest()
-/// and io_close_dest().
-static int stdout_flags = 0;
+/// Original file status flags of standard output. This is used by
+/// io_open_dest() and io_close_dest() to save and restore the flags.
+static int stdout_flags;
+static bool restore_stdout_flags = false;
 #endif
 
 
@@ -53,7 +54,7 @@ static bool io_write_buf(file_pair *pair, const uint8_t *buf, size_t size);
 extern void
 io_init(void)
 {
-	// Make sure that stdin, stdout, and and stderr are connected to
+	// Make sure that stdin, stdout, and stderr are connected to
 	// a valid file descriptor. Exit immediately with exit code ERROR
 	// if we cannot make the file descriptors valid. Maybe we should
 	// print an error message, but our stderr could be screwed anyway.
@@ -397,10 +398,6 @@ io_open_src_real(file_pair *pair)
 			was_symlink = true;
 
 #	elif defined(__NetBSD__)
-		// As of 2010-09-05, NetBSD doesn't document what errno is
-		// used with O_NOFOLLOW. It is EFTYPE though, and I
-		// understood that is very unlikely to change even though
-		// it is undocumented.
 		if (errno == EFTYPE)
 			was_symlink = true;
 
@@ -441,7 +438,7 @@ io_open_src_real(file_pair *pair)
 
 		flags &= ~O_NONBLOCK;
 
-		if (fcntl(pair->src_fd, F_SETFL, flags))
+		if (fcntl(pair->src_fd, F_SETFL, flags) == -1)
 			goto error_msg;
 	}
 #endif
@@ -634,11 +631,11 @@ io_open_dest_real(file_pair *pair)
 			if (!S_ISREG(pair->dest_st.st_mode))
 				return false;
 
-			const int flags = fcntl(STDOUT_FILENO, F_GETFL);
-			if (flags == -1)
+			stdout_flags = fcntl(STDOUT_FILENO, F_GETFL);
+			if (stdout_flags == -1)
 				return false;
 
-			if (flags & O_APPEND) {
+			if (stdout_flags & O_APPEND) {
 				// Creating a sparse file is not possible
 				// when O_APPEND is active (it's used by
 				// shell's >> redirection). As I understand
@@ -657,12 +654,14 @@ io_open_dest_real(file_pair *pair)
 					return false;
 
 				if (fcntl(STDOUT_FILENO, F_SETFL,
-						stdout_flags & ~O_APPEND))
+						stdout_flags & ~O_APPEND)
+						== -1)
 					return false;
 
-				// Remember the flags so that io_close_dest()
-				// can restore them.
-				stdout_flags = flags;
+				// Disabling O_APPEND succeeded. Mark
+				// that the flags should be restored
+				// in io_close_dest().
+				restore_stdout_flags = true;
 
 			} else if (lseek(STDOUT_FILENO, 0, SEEK_CUR)
 					!= pair->dest_st.st_size) {
@@ -703,13 +702,12 @@ io_close_dest(file_pair *pair, bool success)
 {
 #ifndef TUKLIB_DOSLIKE
 	// If io_open_dest() has disabled O_APPEND, restore it here.
-	if (stdout_flags != 0) {
+	if (restore_stdout_flags) {
 		assert(pair->dest_fd == STDOUT_FILENO);
 
-		const int fail = fcntl(STDOUT_FILENO, F_SETFL, stdout_flags);
-		stdout_flags = 0;
+		restore_stdout_flags = false;
 
-		if (fail) {
+		if (fcntl(STDOUT_FILENO, F_SETFL, stdout_flags) == -1) {
 			message_error(_("Error restoring the O_APPEND flag "
 					"to standard output: %s"),
 					strerror(errno));
@@ -882,7 +880,7 @@ io_write_buf(file_pair *pair, const uint8_t *buf, size_t size)
 		if (amount == -1) {
 			if (errno == EINTR) {
 				if (user_abort)
-					return -1;
+					return true;
 
 				continue;
 			}

src/xz/hardware.h

@@ -35,4 +35,4 @@ extern void hardware_memlimit_set(uint64_t new_memlimit,
 extern uint64_t hardware_memlimit_get(enum operation_mode mode);
 
 /// Display the amount of RAM and memory usage limits and exit.
-extern void hardware_memlimit_show(void) lzma_attribute((noreturn));
+extern void hardware_memlimit_show(void) lzma_attribute((__noreturn__));

src/xz/list.c

@@ -203,6 +203,20 @@ parse_indexes(xz_file_info *xfi, file_pair *pair)
 			goto error;
 		}
 
+		// Check that the Stream Footer doesn't specify something
+		// that we don't support. This can only happen if the xz
+		// version is older than liblzma and liblzma supports
+		// something new.
+		//
+		// It is enough to check Stream Footer. Stream Header must
+		// match when it is compared against Stream Footer with
+		// lzma_stream_flags_compare().
+		if (footer_flags.version != 0) {
+			message_error("%s: %s", pair->src_name,
+					message_strm(LZMA_OPTIONS_ERROR));
+			goto error;
+		}
+
 		// Check that the size of the Index field looks sane.
 		lzma_vli index_size = footer_flags.backward_size;
 		if ((lzma_vli)(pos) < index_size + LZMA_STREAM_HEADER_SIZE) {
@@ -382,14 +396,9 @@ parse_block_header(file_pair *pair, const lzma_index_iter *iter,
 	if (buf.u8[0] == 0)
 		goto data_error;
 
-	lzma_block block;
-	lzma_filter filters[LZMA_FILTERS_MAX + 1];
-
-	// Initialize the pointers so that they can be passed to free().
-	for (size_t i = 0; i < ARRAY_SIZE(filters); ++i)
-		filters[i].options = NULL;
-
 	// Initialize the block structure and decode Block Header Size.
+	lzma_filter filters[LZMA_FILTERS_MAX + 1];
+	lzma_block block;
 	block.version = 0;
 	block.check = iter->stream.flags->check;
 	block.filters = filters;
@@ -434,9 +443,25 @@ parse_block_header(file_pair *pair, const lzma_index_iter *iter,
 	switch (lzma_block_compressed_size(&block,
 			iter->block.unpadded_size)) {
 	case LZMA_OK:
+		// Validate also block.uncompressed_size if it is present.
+		// If it isn't present, there's no need to set it since
+		// we aren't going to actually decompress the Block; if
+		// we were decompressing, then we should set it so that
+		// the Block decoder could validate the Uncompressed Size
+		// that was stored in the Index.
+		if (block.uncompressed_size == LZMA_VLI_UNKNOWN
+				|| block.uncompressed_size
+					== iter->block.uncompressed_size)
 			break;
 
+		// If the above fails, the file is corrupt so
+		// LZMA_DATA_ERROR is a good error code.
+
 	case LZMA_DATA_ERROR:
+		// Free the memory allocated by lzma_block_header_decode().
+		for (size_t i = 0; filters[i].id != LZMA_VLI_UNKNOWN; ++i)
+			free(filters[i].options);
+
 		goto data_error;
 
 	default:
@@ -466,14 +491,6 @@ data_error:
 	// Show the error message.
 	message_error("%s: %s", pair->src_name,
 			message_strm(LZMA_DATA_ERROR));
-
-	// Free the memory allocated by lzma_block_header_decode().
-	// This is truly needed only if we get here after a succcessful
-	// call to lzma_block_header_decode() but it doesn't hurt to
-	// always do it.
-	for (size_t i = 0; filters[i].id != LZMA_VLI_UNKNOWN; ++i)
-		free(filters[i].options);
-
 	return true;
 }
 

src/xz/message.c

@@ -94,7 +94,7 @@ static volatile sig_atomic_t progress_needs_updating = false;
 
 /// Signal handler for SIGALRM
 static void
-progress_signal_handler(int sig lzma_attribute((unused)))
+progress_signal_handler(int sig lzma_attribute((__unused__)))
 {
 	progress_needs_updating = true;
 	return;
@@ -211,7 +211,7 @@ message_set_files(unsigned int files)
 static void
 print_filename(void)
 {
-	if (files_total != 1 || filename != stdin_filename) {
+	if (!opt_robot && (files_total != 1 || filename != stdin_filename)) {
 		signals_block();
 
 		FILE *file = opt_mode == MODE_LIST ? stdout : stderr;
@@ -726,7 +726,11 @@ vmessage(enum message_verbosity v, const char *fmt, va_list ap)
 
 		progress_flush(false);
 
-		fprintf(stderr, "%s: ", progname);
+		// TRANSLATORS: This is the program name in the beginning
+		// of the line in messages. Usually it becomes "xz: ".
+		// This is a translatable string because French needs
+		// a space before a colon.
+		fprintf(stderr, _("%s: "), progname);
 		vfprintf(stderr, fmt, ap);
 		fputc('\n', stderr);
 
@@ -855,6 +859,17 @@ message_mem_needed(enum message_verbosity v, uint64_t memusage)
 	// the user might need to +1 MiB to get high enough limit.)
 	memusage = round_up_to_mib(memusage);
 
+	uint64_t memlimit = hardware_memlimit_get(opt_mode);
+
+	// Handle the case when there is no memory usage limit.
+	// This way we don't print a weird message with a huge number.
+	if (memlimit == UINT64_MAX) {
+		message(v, _("%s MiB of memory is required. "
+				"The limiter is disabled."),
+				uint64_to_str(memusage, 0));
+		return;
+	}
+
 	// With US-ASCII:
 	// 2^64 with thousand separators + " MiB" suffix + '\0' = 26 + 4 + 1
 	// But there may be multibyte chars so reserve enough space.
@@ -863,7 +878,6 @@ message_mem_needed(enum message_verbosity v, uint64_t memusage)
 	// Show the memory usage limit as MiB unless it is less than 1 MiB.
 	// This way it's easy to notice errors where one has typed
 	// --memory=123 instead of --memory=123MiB.
-	uint64_t memlimit = hardware_memlimit_get(opt_mode);
 	if (memlimit < (UINT32_C(1) << 20)) {
 		snprintf(memlimitstr, sizeof(memlimitstr), "%s B",
 				uint64_to_str(memlimit, 1));

src/xz/message.h

@@ -45,7 +45,7 @@ extern enum message_verbosity message_verbosity_get(void);
 ///
 /// This doesn't touch the exit status.
 extern void message(enum message_verbosity verbosity, const char *fmt, ...)
-		lzma_attribute((format(printf, 2, 3)));
+		lzma_attribute((__format__(__printf__, 2, 3)));
 
 
 /// \brief      Prints a warning and possibly sets exit status
@@ -53,7 +53,7 @@ extern void message(enum message_verbosity verbosity, const char *fmt, ...)
 /// The message is printed only if verbosity level is at least V_WARNING.
 /// The exit status is set to WARNING unless it was already at ERROR.
 extern void message_warning(const char *fmt, ...)
-		lzma_attribute((format(printf, 1, 2)));
+		lzma_attribute((__format__(__printf__, 1, 2)));
 
 
 /// \brief      Prints an error message and sets exit status
@@ -61,25 +61,25 @@ extern void message_warning(const char *fmt, ...)
 /// The message is printed only if verbosity level is at least V_ERROR.
 /// The exit status is set to ERROR.
 extern void message_error(const char *fmt, ...)
-		lzma_attribute((format(printf, 1, 2)));
+		lzma_attribute((__format__(__printf__, 1, 2)));
 
 
 /// \brief      Prints an error message and exits with EXIT_ERROR
 ///
 /// The message is printed only if verbosity level is at least V_ERROR.
 extern void message_fatal(const char *fmt, ...)
-		lzma_attribute((format(printf, 1, 2)))
-		lzma_attribute((noreturn));
+		lzma_attribute((__format__(__printf__, 1, 2)))
+		lzma_attribute((__noreturn__));
 
 
 /// Print an error message that an internal error occurred and exit with
 /// EXIT_ERROR.
-extern void message_bug(void) lzma_attribute((noreturn));
+extern void message_bug(void) lzma_attribute((__noreturn__));
 
 
 /// Print a message that establishing signal handlers failed, and exit with
 /// exit status ERROR.
-extern void message_signal_handler(void) lzma_attribute((noreturn));
+extern void message_signal_handler(void) lzma_attribute((__noreturn__));
 
 
 /// Convert lzma_ret to a string.
@@ -116,11 +116,11 @@ extern void message_try_help(void);
 
 
 /// Prints the version number to stdout and exits with exit status SUCCESS.
-extern void message_version(void) lzma_attribute((noreturn));
+extern void message_version(void) lzma_attribute((__noreturn__));
 
 
 /// Print the help message.
-extern void message_help(bool long_help) lzma_attribute((noreturn));
+extern void message_help(bool long_help) lzma_attribute((__noreturn__));
 
 
 /// \brief      Set the total number of files to be processed

src/xz/options.c

@@ -31,8 +31,8 @@ typedef struct {
 } option_map;
 
 
-/// Parses option=value pairs that are separated with colons, semicolons,
-/// or commas: opt=val:opt=val;opt=val,opt=val
+/// Parses option=value pairs that are separated with commas:
+/// opt=val,opt=val,opt=val
 ///
 /// Each option is a string, that is converted to an integer using the
 /// index where the option string is in the array.
@@ -150,7 +150,7 @@ enum {
 
 static void
 set_delta(void *options, uint32_t key, uint64_t value,
-		const char *valuestr lzma_attribute((unused)))
+		const char *valuestr lzma_attribute((__unused__)))
 {
 	lzma_options_delta *opt = options;
 	switch (key) {
@@ -194,7 +194,7 @@ enum {
 
 static void
 set_bcj(void *options, uint32_t key, uint64_t value,
-		const char *valuestr lzma_attribute((unused)))
+		const char *valuestr lzma_attribute((__unused__)))
 {
 	lzma_options_bcj *opt = options;
 	switch (key) {
@@ -241,7 +241,7 @@ enum {
 };
 
 
-static void lzma_attribute((noreturn))
+static void lzma_attribute((__noreturn__))
 error_lzma_preset(const char *valuestr)
 {
 	message_fatal(_("Unsupported LZMA1/LZMA2 preset: %s"), valuestr);

src/xz/signals.c

@@ -77,17 +77,19 @@ signals_init(void)
 		sigaddset(&hooked_signals, message_progress_sigs[i]);
 #endif
 
-	struct sigaction sa;
+	// Using "my_sa" because "sa" may conflict with a sockaddr variable
+	// from system headers on Solaris.
+	struct sigaction my_sa;
 
 	// All the signals that we handle we also blocked while the signal
 	// handler runs.
-	sa.sa_mask = hooked_signals;
+	my_sa.sa_mask = hooked_signals;
 
 	// Don't set SA_RESTART, because we want EINTR so that we can check
 	// for user_abort and cleanup before exiting. We block the signals
 	// for which we have established a handler when we don't want EINTR.
-	sa.sa_flags = 0;
-	sa.sa_handler = &signal_handler;
+	my_sa.sa_flags = 0;
+	my_sa.sa_handler = &signal_handler;
 
 	for (size_t i = 0; i < ARRAY_SIZE(sigs); ++i) {
 		// If the parent process has left some signals ignored,
@@ -98,7 +100,7 @@ signals_init(void)
 			continue;
 
 		// Establish the signal handler.
-		if (sigaction(sigs[i], &sa, NULL))
+		if (sigaction(sigs[i], &my_sa, NULL))
 			message_signal_handler();
 	}
 
@@ -179,7 +181,7 @@ signals_exit(void)
 // console window.
 
 static BOOL WINAPI
-signal_handler(DWORD type lzma_attribute((unused)))
+signal_handler(DWORD type lzma_attribute((__unused__)))
 {
 	// Since we don't get a signal number which we could raise() at
 	// signals_exit() like on POSIX, just set the exit status to

src/xz/suffix.c

@@ -21,12 +21,6 @@
 static char *custom_suffix = NULL;
 
 
-struct suffix_pair {
-	const char *compressed;
-	const char *uncompressed;
-};
-
-
 /// \brief      Test if the char is a directory separator
 static bool
 is_dir_sep(char c)
@@ -86,7 +80,10 @@ test_suffix(const char *suffix, const char *src_name, size_t src_len)
 static char *
 uncompressed_name(const char *src_name, const size_t src_len)
 {
-	static const struct suffix_pair suffixes[] = {
+	static const struct {
+		const char *compressed;
+		const char *uncompressed;
+	} suffixes[] = {
 		{ ".xz",    "" },
 		{ ".txz",   ".tar" }, // .txz abbreviation for .txt.gz is rare.
 		{ ".lzma",  "" },
@@ -145,25 +142,25 @@ static char *
 compressed_name(const char *src_name, const size_t src_len)
 {
 	// The order of these must match the order in args.h.
-	static const struct suffix_pair all_suffixes[][3] = {
+	static const char *const all_suffixes[][3] = {
 		{
-			{ ".xz",    "" },
-			{ ".txz",   ".tar" },
-			{ NULL, NULL }
+			".xz",
+			".txz",
+			NULL
 		}, {
-			{ ".lzma",  "" },
-			{ ".tlz",   ".tar" },
-			{ NULL,     NULL }
+			".lzma",
+			".tlz",
+			NULL
 /*
 		}, {
-			{ ".gz",    "" },
-			{ ".tgz",   ".tar" },
-			{ NULL,     NULL }
+			".gz",
+			".tgz",
+			NULL
 */
 		}, {
 			// --format=raw requires specifying the suffix
 			// manually or using stdout.
-			{ NULL,     NULL }
+			NULL
 		}
 	};
 
@@ -171,14 +168,22 @@ compressed_name(const char *src_name, const size_t src_len)
 	assert(opt_format != FORMAT_AUTO);
 
 	const size_t format = opt_format - 1;
-	const struct suffix_pair *const suffixes = all_suffixes[format];
+	const char *const *suffixes = all_suffixes[format];
 
-	for (size_t i = 0; suffixes[i].compressed != NULL; ++i) {
-		if (test_suffix(suffixes[i].compressed, src_name, src_len)
-				!= 0) {
+	for (size_t i = 0; suffixes[i] != NULL; ++i) {
+		if (test_suffix(suffixes[i], src_name, src_len) != 0) {
 			message_warning(_("%s: File already has `%s' "
 					"suffix, skipping"), src_name,
-					suffixes[i].compressed);
+					suffixes[i]);
+			return NULL;
+		}
+	}
+
+	if (custom_suffix != NULL) {
+		if (test_suffix(custom_suffix, src_name, src_len) != 0) {
+			message_warning(_("%s: File already has `%s' "
+					"suffix, skipping"), src_name,
+					custom_suffix);
 			return NULL;
 		}
 	}
@@ -193,7 +198,7 @@ compressed_name(const char *src_name, const size_t src_len)
 	}
 
 	const char *suffix = custom_suffix != NULL
-			? custom_suffix : suffixes[0].compressed;
+			? custom_suffix : suffixes[0];
 	const size_t suffix_len = strlen(suffix);
 
 	char *dest_name = xmalloc(src_len + suffix_len + 1);
@@ -227,7 +232,7 @@ suffix_set(const char *suffix)
 	// Empty suffix and suffixes having a directory separator are
 	// rejected. Such suffixes would break things later.
 	if (suffix[0] == '\0' || has_dir_sep(suffix))
-		message_fatal(_("%s: Invalid filename suffix"), optarg);
+		message_fatal(_("%s: Invalid filename suffix"), suffix);
 
 	// Replace the old custom_suffix (if any) with the new suffix.
 	free(custom_suffix);

src/xz/util.c

@@ -26,9 +26,19 @@ xrealloc(void *ptr, size_t size)
 {
 	assert(size > 0);
 
+	// Save ptr so that we can free it if realloc fails.
+	// The point is that message_fatal ends up calling stdio functions
+	// which in some libc implementations might allocate memory from
+	// the heap. Freeing ptr improves the chances that there's free
+	// memory for stdio functions if they need it.
+	void *p = ptr;
 	ptr = realloc(ptr, size);
-	if (ptr == NULL)
-		message_fatal("%s", strerror(errno));
+
+	if (ptr == NULL) {
+		const int saved_errno = errno;
+		free(p);
+		message_fatal("%s", strerror(saved_errno));
+	}
 
 	return ptr;
 }

src/xz/util.h

@@ -20,11 +20,11 @@
 
 /// \brief      Safe realloc() that never returns NULL
 extern void *xrealloc(void *ptr, size_t size)
-		lzma_attribute((malloc)) lzma_attr_alloc_size(2);
+		lzma_attribute((__malloc__)) lzma_attr_alloc_size(2);
 
 
 /// \brief      Safe strdup() that never returns NULL
-extern char *xstrdup(const char *src) lzma_attribute((malloc));
+extern char *xstrdup(const char *src) lzma_attribute((__malloc__));
 
 
 /// \brief      Fancy version of strtoull()
@@ -102,7 +102,7 @@ extern const char *uint64_to_nicestr(uint64_t value,
 /// A maximum of *left bytes is written starting from *pos. *pos and *left
 /// are updated accordingly.
 extern void my_snprintf(char **pos, size_t *left, const char *fmt, ...)
-		lzma_attribute((format(printf, 3, 4)));
+		lzma_attribute((__format__(__printf__, 3, 4)));
 
 
 /// \brief      Check if filename is empty and print an error message

src/xz/xz.1

@@ -5,16 +5,17 @@
 .\" This file has been put into the public domain.
 .\" You can do whatever you want with this file.
 .\"
-.TH XZ 1 "2010-10-04" "Tukaani" "XZ Utils"
+.TH XZ 1 "2013-06-21" "Tukaani" "XZ Utils"
 .
 .SH NAME
 xz, unxz, xzcat, lzma, unlzma, lzcat \- Compress or decompress .xz and .lzma files
 .
 .SH SYNOPSIS
 .B xz
-.RI [ option ]...
-.RI [ file ]...
-.PP
+.RI [ option... ]
+.RI [ file... ]
+.
+.SH COMMAND ALIASES
 .B unxz
 is equivalent to
 .BR "xz \-\-decompress" .
@@ -708,7 +709,7 @@ be dramatically higher than that of the single-threaded mode.
 DecMem contains the decompressor memory requirements.
 That is, the compression settings determine
 the memory requirements of the decompressor.
-The exact decompressor memory usage is slighly more than
+The exact decompressor memory usage is slightly more than
 the LZMA2 dictionary size, but the values in the table
 have been rounded up to the next full MiB.
 .RE
@@ -866,7 +867,7 @@ This is equivalent to specifying \fB\-\-memlimit\-compress=\fIlimit
 \fB\-\-memlimit\-decompress=\fIlimit\fR.
 .TP
 .B \-\-no\-adjust
-Display an error and exit if the compression settings exceed the
+Display an error and exit if the compression settings exceed
 the memory usage limit.
 The default is to adjust the settings downwards so
 that the memory usage limit is not exceeded.
@@ -897,11 +898,14 @@ if threading will be enabled by default.
 .SS "Custom compressor filter chains"
 A custom filter chain allows specifying
 the compression settings in detail instead of relying on
-the settings associated to the preset levels.
+the settings associated to the presets.
 When a custom filter chain is specified,
-the compression preset level options
-(\fB\-0\fR ... \fB\-9\fR and \fB\-\-extreme\fR) are
-silently ignored.
+preset options (\fB\-0\fR ... \fB\-9\fR and \fB\-\-extreme\fR)
+earlier on the command line are forgotten.
+If a preset option is specified
+after one or more custom filter chain options,
+the new preset takes effect and
+the custom filter chain options specified earlier are forgotten.
 .PP
 A filter chain is comparable to piping on the command line.
 When compressing, the uncompressed input goes to the first filter,
@@ -934,6 +938,15 @@ Extra commas in
 are ignored.
 Every option has a default value, so you need to
 specify only those you want to change.
+.PP
+To see the whole filter chain and
+.IR options ,
+use
+.B "xz \-vv"
+(that is, use
+.B \-\-verbose
+twice).
+This works also for viewing the filter chain options used by presets.
 .TP
 \fB\-\-lzma1\fR[\fB=\fIoptions\fR]
 .PD 0
@@ -976,13 +989,12 @@ The only supported modifier is currently
 .BR e ,
 which matches
 .BR \-\-extreme .
-The default
-.I preset
-is
-.BR 6 ,
-from which the default values for the rest of the LZMA1 or LZMA2
+If no
+.B preset
+is specified, the default values of LZMA1 or LZMA2
 .I options
-are taken.
+are taken from the preset
+.BR 6 .
 .TP
 .BI dict= size
 Dictionary (history buffer)
@@ -1578,7 +1590,7 @@ is supported only together with
 .BR \-\-info\-memory ,
 and
 .BR \-\-list .
-It will be supported for normal compression and
+It will be supported for compression and
 decompression in the future.
 .
 .SS Version
@@ -1836,6 +1848,25 @@ headers.
 .PD
 .PP
 The columns of the
+.B summary
+lines:
+.PD 0
+.RS
+.IP 2. 4
+Amount of memory (in bytes) required to decompress
+this file with this
+.B xz
+version
+.IP 3. 4
+.B yes
+or
+.B no
+indicating if all block headers have both compressed size and
+uncompressed size stored in them
+.RE
+.PD
+.PP
+The columns of the
 .B totals
 line:
 .PD 0
@@ -2160,14 +2191,15 @@ The output can vary even between different
 builds of the same XZ Utils version,
 if different build options are used.
 .PP
-The above means that implementing
+The above means that once
 .B \-\-rsyncable
-to create rsyncable
-.B .xz
-files is not going to happen without
-freezing a part of the encoder
-implementation, which can then be used with
-.BR \-\-rsyncable .
+has been implemented,
+the resulting files won't necessarily be rsyncable
+unless both old and new files have been compressed
+with the same xz version.
+This problem can be fixed if a part of the encoder
+implementation is frozen to keep rsyncable output
+stable across xz versions.
 .
 .SS "Embedded .xz decompressors"
 Embedded

src/xzdec/Makefile.am

@@ -59,7 +59,14 @@ endif
 if COND_LZMADEC
 bin_PROGRAMS += lzmadec
 
-# FIXME: If xzdec is disabled, this will create a dangling symlink.
+# Create the symlink lzmadec.1->xzdec.1 only if xzdec.1 was installed.
+# This is better than creating a dangling symlink, especially
+# because creating the link may fail due to the directory being missing.
+#
+# FIXME: The correct solution would be to install xzdec.1 as lzmadec.1
+# but I don't know what is the sane way to do it and since this is a bit
+# unusual situation anyway, it's not that important.
+if COND_XZDEC
 install-data-hook:
 	cd $(DESTDIR)$(mandir)/man1 && \
 	target=`echo xzdec | sed '$(transform)'` && \
@@ -72,3 +79,4 @@ uninstall-hook:
 	link=`echo lzmadec | sed '$(transform)'` && \
 	rm -f $$link.1
 endif
+endif

src/xzdec/xzdec.1

@@ -4,17 +4,17 @@
 .\" This file has been put into the public domain.
 .\" You can do whatever you want with this file.
 .\"
-.TH XZDEC 1 "2010-09-27" "Tukaani" "XZ Utils"
+.TH XZDEC 1 "2013-06-30" "Tukaani" "XZ Utils"
 .SH NAME
 xzdec, lzmadec \- Small .xz and .lzma decompressors
 .SH SYNOPSIS
 .B xzdec
-.RI [ option ]...
-.RI [ file ]...
+.RI [ option... ]
+.RI [ file... ]
 .br
 .B lzmadec
-.RI [ option ]...
-.RI [ file ]...
+.RI [ option... ]
+.RI [ file... ]
 .SH DESCRIPTION
 .B xzdec
 is a liblzma-based decompression-only tool for

src/xzdec/xzdec.c

@@ -40,7 +40,7 @@
 static unsigned int display_errors = 2;
 
 
-static void lzma_attribute((format(printf, 1, 2)))
+static void lzma_attribute((__format__(__printf__, 1, 2)))
 my_errorf(const char *fmt, ...)
 {
 	va_list ap;
@@ -57,18 +57,18 @@ my_errorf(const char *fmt, ...)
 }
 
 
-static void lzma_attribute((noreturn))
+static void lzma_attribute((__noreturn__))
 help(void)
 {
 	printf(
 "Usage: %s [OPTION]... [FILE]...\n"
-"Uncompress files in the ." TOOL_FORMAT " format to the standard output.\n"
+"Decompress files in the ." TOOL_FORMAT " format to standard output.\n"
 "\n"
-"  -c, --stdout       (ignored)\n"
-"  -d, --decompress   (ignored)\n"
-"  -k, --keep         (ignored)\n"
+"  -d, --decompress   (ignored, only decompression is supported)\n"
+"  -k, --keep         (ignored, files are never deleted)\n"
+"  -c, --stdout       (ignored, output is always written to standard output)\n"
 "  -q, --quiet        specify *twice* to suppress errors\n"
-"  -Q, --no-warn      (ignored)\n"
+"  -Q, --no-warn      (ignored, the exit status 2 is never used)\n"
 "  -h, --help         display this help and exit\n"
 "  -V, --version      display the version number and exit\n"
 "\n"
@@ -81,7 +81,7 @@ PACKAGE_NAME " home page: <" PACKAGE_URL ">\n", progname);
 }
 
 
-static void lzma_attribute((noreturn))
+static void lzma_attribute((__noreturn__))
 version(void)
 {
 	printf(TOOL_FORMAT "dec (" PACKAGE_NAME ") " LZMA_VERSION_STRING "\n"

tests/Makefile.am

@@ -10,9 +10,11 @@ EXTRA_DIST = \
 	tests.h \
 	test_files.sh \
 	test_compress.sh \
+	test_scripts.sh \
 	bcj_test.c \
 	compress_prepared_bcj_sparc \
-	compress_prepared_bcj_x86
+	compress_prepared_bcj_x86 \
+	xzgrep_expected_output
 
 AM_CPPFLAGS = \
 	-I$(top_srcdir)/src/common \
@@ -33,7 +35,8 @@ check_PROGRAMS = \
 	test_stream_flags \
 	test_filter_flags \
 	test_block_header \
-	test_index
+	test_index \
+	test_bcj_exact_size
 
 TESTS = \
 	test_check \
@@ -41,8 +44,14 @@ TESTS = \
 	test_filter_flags \
 	test_block_header \
 	test_index \
+	test_bcj_exact_size \
 	test_files.sh \
 	test_compress.sh
 
+if COND_SCRIPTS
+TESTS += test_scripts.sh
+endif
+
 clean-local:
-	-rm -f compress_generated_*
+	-rm -f compress_generated_* \
+		xzgrep_test_output xzgrep_test_1.xz xzgrep_test_2.xz

tests/create_compress_files.c

@@ -79,7 +79,8 @@ static void
 write_abc(FILE *file)
 {
 	for (size_t i = 0; i < 12345; ++i)
-		fwrite("abc\n", 4, 1, file);
+		if (fwrite("abc\n", 4, 1, file) != 1)
+			exit(1);
 }
 
 

tests/files/README

@@ -87,6 +87,10 @@
     uncompressed with dictionary reset, and third is LZMA with new
     properties but without dictionary reset.
 
+    good-1-lzma2-5.xz has an empty LZMA2 stream with only the end of
+    payload marker. XZ Utils 5.0.1 and older incorrectly see this file
+    as corrupt.
+
     good-1-3delta-lzma2.xz has three Delta filters and LZMA2.
 
 
@@ -184,6 +188,10 @@
 
     bad-1-block_header-5.xz has zero as Compressed Size in Block Header.
 
+    bad-1-block_header-6.xz has corrupt Block Header which may crash
+    xz -lvv in XZ Utils 5.0.3 and earlier. It was fixed in the commit
+    c0297445064951807803457dca1611b3c47e7f0f.
+
     bad-2-index-1.xz has wrong Unpadded Sizes in Index.
 
     bad-2-index-2.xz has wrong Uncompressed Sizes in Index.

tests/test_bcj_exact_size.c

@@ -0,0 +1,112 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file       test_bcj_exact_size.c
+/// \brief      Tests BCJ decoding when the output size is known
+///
+/// These tests fail with XZ Utils 5.0.3 and earlier.
+//
+//  Author:     Lasse Collin
+//
+//  This file has been put into the public domain.
+//  You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#include "tests.h"
+
+
+/// Something to be compressed
+static const uint8_t in[16] = "0123456789ABCDEF";
+
+/// in[] after compression
+static uint8_t compressed[1024];
+static size_t compressed_size = 0;
+
+/// Output buffer for decompressing compressed[]
+static uint8_t out[sizeof(in)];
+
+
+static void
+compress(void)
+{
+	// Compress with PowerPC BCJ and LZMA2. PowerPC BCJ is used because
+	// it has fixed 4-byte alignment which makes triggering the potential
+	// bug easy.
+	lzma_options_lzma opt_lzma2;
+	succeed(lzma_lzma_preset(&opt_lzma2, 0));
+
+	lzma_filter filters[3] = {
+		{ .id = LZMA_FILTER_POWERPC, .options = NULL },
+		{ .id = LZMA_FILTER_LZMA2, .options = &opt_lzma2 },
+		{ .id = LZMA_VLI_UNKNOWN, .options = NULL },
+	};
+
+	expect(lzma_stream_buffer_encode(filters, LZMA_CHECK_CRC32, NULL,
+			in, sizeof(in),
+			compressed, &compressed_size, sizeof(compressed))
+			== LZMA_OK);
+}
+
+
+static void
+decompress(void)
+{
+	lzma_stream strm = LZMA_STREAM_INIT;
+	expect(lzma_stream_decoder(&strm, 10 << 20, 0) == LZMA_OK);
+
+	strm.next_in = compressed;
+	strm.next_out = out;
+
+	while (true) {
+		if (strm.total_in < compressed_size)
+			strm.avail_in = 1;
+
+		const lzma_ret ret = lzma_code(&strm, LZMA_RUN);
+		if (ret == LZMA_STREAM_END) {
+			expect(strm.total_in == compressed_size);
+			expect(strm.total_out == sizeof(in));
+			return;
+		}
+
+		expect(ret == LZMA_OK);
+
+		if (strm.total_out < sizeof(in))
+			strm.avail_out = 1;
+	}
+}
+
+
+static void
+decompress_empty(void)
+{
+	// An empty file with one Block using PowerPC BCJ and LZMA2.
+	static const uint8_t empty_bcj_lzma2[] = {
+		0xFD, 0x37, 0x7A, 0x58, 0x5A, 0x00, 0x00, 0x01,
+		0x69, 0x22, 0xDE, 0x36, 0x02, 0x01, 0x05, 0x00,
+		0x21, 0x01, 0x00, 0x00, 0x7F, 0xE0, 0xF1, 0xC8,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		0x00, 0x01, 0x11, 0x00, 0x3B, 0x96, 0x5F, 0x73,
+		0x90, 0x42, 0x99, 0x0D, 0x01, 0x00, 0x00, 0x00,
+		0x00, 0x01, 0x59, 0x5A
+	};
+
+	// Decompress without giving any output space.
+	uint64_t memlimit = 1 << 20;
+	size_t in_pos = 0;
+	size_t out_pos = 0;
+	expect(lzma_stream_buffer_decode(&memlimit, 0, NULL,
+			empty_bcj_lzma2, &in_pos, sizeof(empty_bcj_lzma2),
+			out, &out_pos, 0) == LZMA_OK);
+	expect(in_pos == sizeof(empty_bcj_lzma2));
+	expect(out_pos == 0);
+}
+
+
+extern int
+main(void)
+{
+	compress();
+	decompress();
+	decompress_empty();
+	return 0;
+}

tests/test_block.c

@@ -1,52 +0,0 @@
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file       test_block.c
-/// \brief      Tests Block coders
-//
-//  Author:     Lasse Collin
-//
-//  This file has been put into the public domain.
-//  You can do whatever you want with this file.
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#include "tests.h"
-
-
-static uint8_t text[] = "Hello world!";
-static uint8_t buffer[4096];
-static lzma_options_block block_options;
-static lzma_stream strm = LZMA_STREAM_INIT;
-
-
-static void
-test1(void)
-{
-
-}
-
-
-int
-main()
-{
-	lzma_init();
-
-	block_options = (lzma_options_block){
-		.check_type = LZMA_CHECK_NONE,
-		.has_eopm = true,
-		.has_uncompressed_size_in_footer = false,
-		.has_backward_size = false,
-		.handle_padding = false,
-		.total_size = LZMA_VLI_UNKNOWN,
-		.compressed_size = LZMA_VLI_UNKNOWN,
-		.uncompressed_size = LZMA_VLI_UNKNOWN,
-		.header_size = 5,
-	};
-	block_options.filters[0].id = LZMA_VLI_UNKNOWN;
-	block_options.filters[0].options = NULL;
-
-
-	lzma_end(&strm);
-
-	return 0;
-}

tests/test_scripts.sh

@@ -0,0 +1,76 @@
+#!/bin/sh
+
+###############################################################################
+#
+# Author: Jonathan Nieder
+#
+# This file has been put into the public domain.
+# You can do whatever you want with this file.
+#
+###############################################################################
+
+# If scripts weren't built, this test is skipped.
+XZ=../src/xz/xz
+XZDIFF=../src/scripts/xzdiff
+XZGREP=../src/scripts/xzgrep
+
+for i in XZ XZDIFF XZGREP; do
+	eval test -x "\$$i" && continue
+	(exit 77)
+	exit 77
+done
+
+PATH=`pwd`/../src/xz:$PATH
+export PATH
+
+test -z "$srcdir" && srcdir=.
+preimage=$srcdir/files/good-1-check-crc32.xz
+samepostimage=$srcdir/files/good-1-check-crc64.xz
+otherpostimage=$srcdir/files/good-1-lzma2-1.xz
+
+"$XZDIFF" "$preimage" "$samepostimage" >/dev/null
+status=$?
+if test "$status" != 0 ; then
+	echo "xzdiff with no changes exited with status $status != 0"
+	(exit 1)
+	exit 1
+fi
+
+"$XZDIFF" "$preimage" "$otherpostimage" >/dev/null
+status=$?
+if test "$status" != 1 ; then
+	echo "xzdiff with changes exited with status $status != 1"
+	(exit 1)
+	exit 1
+fi
+
+"$XZDIFF" "$preimage" "$srcdir/files/missing.xz" >/dev/null 2>&1
+status=$?
+if test "$status" != 2 ; then
+	echo "xzdiff with missing operand exited with status $status != 2"
+	(exit 1)
+	exit 1
+fi
+
+# The exit status must be 0 when a match was found at least from one file,
+# and 1 when no match was found in any file.
+cp "$srcdir/files/good-1-lzma2-1.xz" xzgrep_test_1.xz
+cp "$srcdir/files/good-2-lzma2.xz" xzgrep_test_2.xz
+for pattern in el Hello NOMATCH; do
+	for opts in "" "-l" "-h" "-H"; do
+		echo "=> xzgrep $opts $pattern <="
+		"$XZGREP" $opts $pattern xzgrep_test_1.xz xzgrep_test_2.xz
+		echo retval $?
+	done
+done > xzgrep_test_output 2>&1
+
+if cmp -s "$srcdir/xzgrep_expected_output" xzgrep_test_output ; then
+	:
+else
+	echo "unexpected output from xzgrep"
+	(exit 1)
+	exit 1
+fi
+
+(exit 0)
+exit 0

tests/xzgrep_expected_output

@@ -0,0 +1,39 @@
+=> xzgrep  el <=
+xzgrep_test_1.xz:elit, sed do eiusmod tempor incididunt ut 
+xzgrep_test_1.xz:in voluptate velit esse cillum dolore eu 
+xzgrep_test_2.xz:Hello
+retval 0
+=> xzgrep -l el <=
+xzgrep_test_1.xz
+xzgrep_test_2.xz
+retval 0
+=> xzgrep -h el <=
+elit, sed do eiusmod tempor incididunt ut 
+in voluptate velit esse cillum dolore eu 
+Hello
+retval 0
+=> xzgrep -H el <=
+xzgrep_test_1.xz:elit, sed do eiusmod tempor incididunt ut 
+xzgrep_test_1.xz:in voluptate velit esse cillum dolore eu 
+xzgrep_test_2.xz:Hello
+retval 0
+=> xzgrep  Hello <=
+xzgrep_test_2.xz:Hello
+retval 0
+=> xzgrep -l Hello <=
+xzgrep_test_2.xz
+retval 0
+=> xzgrep -h Hello <=
+Hello
+retval 0
+=> xzgrep -H Hello <=
+xzgrep_test_2.xz:Hello
+retval 0
+=> xzgrep  NOMATCH <=
+retval 1
+=> xzgrep -l NOMATCH <=
+retval 1
+=> xzgrep -h NOMATCH <=
+retval 1
+=> xzgrep -H NOMATCH <=
+retval 1