po/fr: improve wording for help for --lzma1/--lzma2.

Thanks to Adrien Nader.

.codespellrc

@@ -1,24 +0,0 @@
-[codespell]
-
-# Skip all translation files and a few other autogenerated files.
-# The autotool files should have their typos fixed in the upstream, but
-# until then we will blacklist them here.
-skip = *.po,*.pot,./po4a/man,./doc/api,./configure,./autom4te.cache,./m4/libtool.m4,./build-aux/depcomp,./build-aux/ltmain.sh,./build-aux/config.guess,./build-aux/config.rpath,./m4/po.m4,./build-aux/config.sub
-
-# Ignore false positive matching words. Ideally codespell would allow
-# ignoring words for specific files, but that does not appear to be
-# supported. Instead we need to hope we do not make these typos.
-# Additionally, the ignored words must be specified lower-case even though
-# some of the false positives only occurred upper-case.
-# ANS - used as a variable name in xzmore.in.
-# bu - groff syntax for creating a bullet list item, used in xz.1.
-# te - groff syntax, used in xz.1.
-# caf - command line options for tar example, used in xz.1.
-ignore-words-list = ans,bu,te,caf
-
-# Add extra dictionaries to help improvement comments, docs, etc.
-builtin = clear,rare,informal,usage,names
-
-# Always default to highest interactive level to avoid accidentally
-# changing a false positive or picking the wrong replacement.
-interactive = 3

.github/SECURITY.md

@@ -1,23 +0,0 @@
-# Security Policy
-
-## Supported Versions
-
-We provide security updates to the development branch and the stable
-branches. Security patches for old releases are available on the
-[project website](https://xz.tukaani.org/xz-utils/).
-
-## Reporting a Vulnerability
-
-If you discover a security vulnerability in this project, please
-report it privately. **Do not disclose it as a public issue.** This gives
-us time to work with you to fix the issue before public exposure, reducing
-the chance that the exploit will be used before a patch is released.
-
-You may submit a report by emailing us at
-[xz@tukaani.org](mailto:xz@tukaani.org), or through
-[Security Advisories](https://github.com/tukaani-project/xz/security/advisories/new).
-While both options are available, we prefer email.
-
-This project is maintained by a team of volunteers on a reasonable-effort
-basis. As such, please give us 90 days to work on a fix before
-public exposure.

.github/workflows/ci.yml

@@ -1,160 +0,0 @@
-# SPDX-License-Identifier: 0BSD
-
-#############################################################################
-#
-# Author: Jia Tan
-#
-#############################################################################
-
-name: CI
-
-on:
-  # Triggers the workflow on push or pull request events but only for the master branch
-  push:
-    branches: [ master ]
-  pull_request:
-    branches: [ master ]
-
-  # Allows running workflow manually
-  workflow_dispatch:
-
-jobs:
-  POSIX:
-    strategy:
-      matrix:
-        os: [ubuntu-latest, macos-latest]
-        build_system: [autotools, cmake]
-    runs-on: ${{ matrix.os }}
-    steps:
-      - uses: actions/checkout@8ade135a41bc03ea155e62e844d188df1ea18608 #v4.1.0
-
-      ########################
-      # Install Dependencies #
-      ########################
-
-      # Install Autotools on Linux
-      - name: Install Dependencies
-        if: ${{ matrix.os == 'ubuntu-latest' && matrix.build_system == 'autotools' }}
-        run: |
-            sudo apt-get update
-            sudo apt-get install -y autoconf automake build-essential po4a autopoint gcc-multilib doxygen musl-tools
-
-      # Install Autotools on Mac
-      - name: Install Dependencies
-        if: ${{ matrix.os == 'macos-latest' && matrix.build_system == 'autotools' }}
-        run: brew install autoconf automake libtool po4a doxygen
-
-      # Install CMake on Linux
-      - name: Install Dependencies
-        if: ${{ matrix.os == 'ubuntu-latest' && matrix.build_system == 'cmake' }}
-        run: |
-            sudo apt-get update
-            sudo apt-get install -y build-essential cmake musl-tools
-
-      # Install CMake on Mac
-      - name: Install Dependencies
-        if: ${{ matrix.os == 'macos-latest' && matrix.build_system == 'cmake' }}
-        run: brew install cmake
-
-      ##################
-      # Build and Test #
-      ##################
-
-      # -b specifies the build system to use.
-      # -p specifies the phase (build or test) to help narrow down an error
-      #    if one occurs.
-      #
-      # The first two builds/tests are only run on Autotools Linux and
-      # affect the CFLAGS. Resetting the CFLAGS requires clearing the
-      # config cache between runs, so the tests that require CFLAGS are
-      # done first.
-      - name: Build 32-bit
-        if: ${{ matrix.os == 'ubuntu-latest' && matrix.build_system == 'autotools' }}
-        run: ./build-aux/ci_build.sh -b autotools -p build -f "-m32"
-      - name: Test 32-bit
-        if: ${{ matrix.os == 'ubuntu-latest' && matrix.build_system == 'autotools' }}
-        run: |
-            ./build-aux/ci_build.sh -b autotools -p test -f "-m32" -n 32_bit
-            cd ../xz_build && make distclean
-
-      # ifunc must be disabled for this test because __attribute__ ifunc is
-      # incompatible with -fsanitize=address.
-      #
-      # The sandbox must also be disabled because it will prevent access to
-      # the /proc/ filesystem on Linux, which is used by the sanitizer's
-      # instrumentation.
-      - name: Build with -fsanitize=address,undefined
-        if: ${{ matrix.os == 'ubuntu-latest' && matrix.build_system == 'autotools' }}
-        run: ./build-aux/ci_build.sh -b autotools -p build -f "-fsanitize=address,undefined" -d ifunc,sandbox
-      - name: Test with -fsanitize=address,undefined
-        if: ${{ matrix.os == 'ubuntu-latest' && matrix.build_system == 'autotools' }}
-        run: |
-            ./build-aux/ci_build.sh -b autotools -p test -f "-fsanitize=address,undefined" -d ifunc,sandbox
-            cd ../xz_build && make distclean
-
-      # musl libc has some slight differences compared to glibc, including
-      # the lack of ifunc support. This tests if the ifunc detection
-      # functions properly since musl-gcc can compile with ifunc support,
-      # but will fail at runtime.
-      - name: Build with musl libc
-        if: ${{ matrix.os == 'ubuntu-latest'}}
-        run: ./build-aux/ci_build.sh -b ${{ matrix.build_system }} -p build -m "/usr/bin/musl-gcc"
-      - name: Test with musl libc
-        if: ${{ matrix.os == 'ubuntu-latest'}}
-        run: |
-            ./build-aux/ci_build.sh -b ${{ matrix.build_system }} -p test -m "/usr/bin/musl-gcc"
-      - name: Clean up musl libc run
-        if: ${{ matrix.os == 'ubuntu-latest' && matrix.build_system == 'autotools' }}
-        run: cd ../xz_build && make distclean
-
-      - name: Build with full features
-        run: ./build-aux/ci_build.sh -b ${{ matrix.build_system }} -p build
-      - name: Test with full features
-        run: ./build-aux/ci_build.sh -b ${{ matrix.build_system }} -p test -n full_features
-
-      - name: Build without encoders
-        run: ./build-aux/ci_build.sh -b ${{ matrix.build_system }} -d encoders,shared -p build
-      - name: Test without encoders
-        run: ./build-aux/ci_build.sh -b ${{ matrix.build_system }} -d encoders,shared -p test -n no_encoders
-
-      - name: Build without decoders
-        run: ./build-aux/ci_build.sh -b ${{ matrix.build_system }} -d decoders,shared -p build
-      - name: Test without decoders
-        run: ./build-aux/ci_build.sh -b ${{ matrix.build_system }} -d decoders,shared -p test -n no_decoders
-
-      - name: Build without threads
-        run: ./build-aux/ci_build.sh -b ${{ matrix.build_system }} -d threads,shared -p build
-      - name: Test without threads
-        run: ./build-aux/ci_build.sh -b ${{ matrix.build_system }} -d threads,shared -p test -n no_threads
-
-      - name: Build without BCJ filters
-        run: ./build-aux/ci_build.sh -b ${{ matrix.build_system }} -d bcj,shared,nls -p build
-      - name: Test without BCJ filters
-        run: ./build-aux/ci_build.sh -b ${{ matrix.build_system }} -d bcj,shared,nls -p test -n no_bcj
-
-      - name: Build without Delta filters
-        run: ./build-aux/ci_build.sh -b ${{ matrix.build_system }} -d delta,shared,nls -p build
-      - name: Test without Delta filters
-        run: ./build-aux/ci_build.sh -b ${{ matrix.build_system }} -d delta,shared,nls -p test -n no_delta
-
-      - name: Build without sha256 check
-        run: ./build-aux/ci_build.sh -b ${{ matrix.build_system }} -c crc32,crc64 -d shared,nls -p build
-      - name: Test without sha256 check
-        run: ./build-aux/ci_build.sh -b ${{ matrix.build_system }} -c crc32,crc64 -d shared,nls -p test -n no_sha256
-
-      - name: Build without crc64 check
-        run: ./build-aux/ci_build.sh -b ${{ matrix.build_system }} -c crc32,sha256 -d shared,nls -p build
-      - name: Test without crc64 check
-        run: ./build-aux/ci_build.sh -b ${{ matrix.build_system }} -c crc32,sha256 -d shared,nls -p test -n no_crc64
-
-      - name: Build small
-        run: ./build-aux/ci_build.sh -b ${{ matrix.build_system }} -d small -p build
-      - name: Test small
-        run: ./build-aux/ci_build.sh -b ${{ matrix.build_system }} -d small -p test -n small
-
-      # Attempt to upload the test logs as artifacts if any step has failed
-      - uses: actions/upload-artifact@c7d193f32edcb7bfad88892161225aeda64e9392 #v4.0.0
-        if: ${{ failure() }}
-        with:
-          name: ${{ matrix.os }} ${{ matrix.build_system }} Test Logs
-          path: build-aux/artifacts

.github/workflows/windows-ci.yml

@@ -1,124 +0,0 @@
-# SPDX-License-Identifier: 0BSD
-
-#############################################################################
-#
-# Author: Jia Tan
-#
-#############################################################################
-
-name: Windows-CI
-
-# Only run the Windows CI manually since it takes much longer than the others.
-on: workflow_dispatch
-
-jobs:
-  POSIX:
-    strategy:
-      matrix:
-        # Test different environments since the code may change between
-        # them and we want to ensure that we support all potential users.
-        # clang64 builds are currently broken when building static libraries
-        # due to a bug in ldd search path:
-        # https://github.com/llvm/llvm-project/issues/67779
-        # TODO - re-enable clang64 when this is resolved.
-        msys2_env: [mingw64, mingw32, ucrt64, msys]
-        build_system: [autotools, cmake]
-
-    # Set the shell to be msys2 as a default to avoid setting it for
-    # every individual run command.
-    defaults:
-      run:
-        shell: msys2 {0}
-
-    runs-on: windows-latest
-
-    steps:
-      #####################
-      # Setup Environment #
-      #####################
-
-      # Rely on the msys2 GitHub Action to set up the msys2 environment.
-      - name: Setup MSYS2
-        uses: msys2/setup-msys2@27b3aa77f672cb6b3054121cfd80c3d22ceebb1d #v2.20.1
-        with:
-          msystem: ${{ matrix.msys2_env }}
-          update: true
-          install: pactoys make
-
-      - name: Checkout code
-        # Need to explicitly set the shell here since we set the default
-        # shell as msys2 earlier. This avoids an extra msys2 dependency on
-        # git.
-        shell: powershell
-        # Avoid Windows line endings. Otherwise test_scripts.sh will fail
-        # because the expected output is stored in the test framework as a
-        # text file and will not match the output from xzgrep.
-        run: git config --global core.autocrlf false
-
-      - uses: actions/checkout@8ade135a41bc03ea155e62e844d188df1ea18608 #v4.1.0
-
-
-      ########################
-      # Install Dependencies #
-      ########################
-
-        # The pacman repository has a different naming scheme for default
-        # msys packages than the others. The pacboy tool allows installing
-        # the packages possible in matrix setup without a burdensome amount
-        # of ifs.
-      - name: Install Dependencies
-        if: ${{ matrix.msys2_env == 'msys' && matrix.build_system == 'autotools' }}
-        run: pacman --noconfirm -S --needed autotools base-devel doxygen gettext-devel gcc
-
-      - name: Install Dependencies
-        if: ${{ matrix.msys2_env != 'msys' && matrix.build_system == 'autotools' }}
-        run: pacboy --noconfirm -S --needed autotools:p toolchain:p doxygen:p
-
-      - name: Install Dependencies
-        if: ${{ matrix.msys2_env == 'msys' && matrix.build_system == 'cmake' }}
-        run: pacman --noconfirm -S --needed cmake base-devel gcc
-
-      - name: Install Dependencies
-        if: ${{ matrix.msys2_env != 'msys' && matrix.build_system == 'cmake' }}
-        run: pacboy --noconfirm -S --needed cmake:p toolchain:p
-
-      ##################
-      # Build and Test #
-      ##################
-
-      - name: Build with full features
-        run: ./build-aux/ci_build.sh -a "--no-po4a" -b ${{ matrix.build_system }} -p build
-      - name: Test with full features
-        run: ./build-aux/ci_build.sh -a "--no-po4a" -b ${{ matrix.build_system }} -p test -n full_features
-
-      - name: Build without threads
-        run: ./build-aux/ci_build.sh -a "--no-po4a" -b ${{ matrix.build_system }} -d threads,shared -p build
-      - name: Test without threads
-        run: ./build-aux/ci_build.sh -a "--no-po4a" -b ${{ matrix.build_system }} -d threads,shared -p test -n no_threads
-
-      - name: Build without encoders
-        run: ./build-aux/ci_build.sh -a "--no-po4a" -b ${{ matrix.build_system }} -d encoders,shared -p build
-      - name: Test without encoders
-        run: ./build-aux/ci_build.sh -a "--no-po4a" -b ${{ matrix.build_system }} -d encoders,shared -p test -n no_encoders
-
-      - name: Build without decoders
-        run: ./build-aux/ci_build.sh -a "--no-po4a" -b ${{ matrix.build_system }} -d decoders,shared -p build
-      - name: Test without decoders
-        run: ./build-aux/ci_build.sh -a "--no-po4a" -b ${{ matrix.build_system }} -d decoders,shared -p test -n no_decoders
-
-      - name: Build with only crc32 check
-        run: ./build-aux/ci_build.sh -a "--no-po4a" -b ${{ matrix.build_system }} -c crc32 -d shared,nls -p build
-      - name: Test with only crc32 check
-        run: ./build-aux/ci_build.sh -a "--no-po4a" -b ${{ matrix.build_system }} -c crc32 -d shared,nls -p test -n crc32_only
-
-
-      ###############
-      # Upload Logs #
-      ###############
-
-      # Upload the test logs as artifacts if any step has failed.
-      - uses: actions/upload-artifact@c7d193f32edcb7bfad88892161225aeda64e9392 #v4.0.0
-        if: ${{ failure() }}
-        with:
-          name: ${{ matrix.msys2_env }} ${{ matrix.build_system }} Test Logs
-          path: build-aux/artifacts

.gitignore

@@ -1,13 +1,9 @@
 *~
 *.bak
 *.bak[0-9]
-.gdb_history
 
 .deps
 .libs
-*.a
-*.gcda
-*.gcno
 *.la
 *.lo
 *.o
@@ -25,7 +21,6 @@ Makefile.in
 /libtool
 /stamp-h1
 
-build-aux/artifacts
 build-aux/compile
 build-aux/config.guess
 build-aux/config.rpath
@@ -34,12 +29,6 @@ build-aux/depcomp
 build-aux/install-sh
 build-aux/ltmain.sh
 build-aux/missing
-build-aux/test-driver
-
-coverage
-
-/doc/internal
-/doc/api
 
 /src/liblzma/liblzma.pc
 /src/lzmainfo/lzmainfo
@@ -52,28 +41,15 @@ coverage
 /src/scripts/xzless
 /src/scripts/xzmore
 
-/tests/*.log
-/tests/*.trs
 /tests/compress_generated_abc
 /tests/compress_generated_random
 /tests/compress_generated_text
 /tests/create_compress_files
-/tests/test_bcj_exact_size
 /tests/test_block_header
 /tests/test_check
 /tests/test_filter_flags
-/tests/test_filter_str
-/tests/test_hardware
 /tests/test_index
-/tests/test_index_hash
-/tests/test_lzip_decoder
-/tests/test_microlzma
-/tests/test_memlimit
 /tests/test_stream_flags
-/tests/test_vli
-/tests/xzgrep_test_1.xz
-/tests/xzgrep_test_2.xz
-/tests/xzgrep_test_output
 
 /lib/Makefile
 /tests/Makefile
@@ -86,29 +62,3 @@ coverage
 /src/liblzma/api/Makefile
 /src/lzmainfo/Makefile
 /src/xzdec/Makefile
-
-/CMakeCache.txt
-/CMakeFiles
-/CTestTestfile.cmake
-/cmake_install.cmake
-/DartConfiguration.tcl
-/liblzma-config-version.cmake
-/liblzma-config.cmake
-/lzcat
-/lzcat.1
-/lzma
-/lzma.1
-/Testing
-/tests_bin/
-/unlzma
-/unlzma.1
-/unxz
-/unxz.1
-/xz
-/xzcat
-/xzcat.1
-/xzdec
-
-/windows/*/.vs
-/windows/*/liblzma.vcxproj.user
-/.vscode/

AUTHORS

@@ -3,51 +3,25 @@ Authors of XZ Utils
 ===================
 
     XZ Utils is developed and maintained by Lasse Collin
-    <lasse.collin@tukaani.org> and Jia Tan <jiat0218@gmail.com>.
+    <lasse.collin@tukaani.org>.
 
     Major parts of liblzma are based on code written by Igor Pavlov,
-    specifically the LZMA SDK <https://7-zip.org/sdk.html>. Without
+    specifically the LZMA SDK <http://7-zip.org/sdk.html>. Without
     this code, XZ Utils wouldn't exist.
 
-    The SHA-256 implementation in liblzma is based on code written by
+    The SHA-256 implementation in liblzma is based on the code found from
-    Wei Dai in Crypto++ Library <https://www.cryptopp.com/>.
+    7-Zip <http://7-zip.org/>, which has a modified version of the SHA-256
+    code found from Crypto++ <http://www.cryptopp.com/>. The SHA-256 code
+    in Crypto++ was written by Kevin Springle and Wei Dai.
 
-    A few scripts have been adapted from GNU gzip. The original
+    Some scripts have been adapted from gzip. The original versions
-    versions were written by Jean-loup Gailly, Charles Levert, and
+    were written by Jean-loup Gailly, Charles Levert, and Paul Eggert.
-    Paul Eggert. Andrew Dudman helped adapting the scripts and their
+    Andrew Dudman helped adapting the scripts and their man pages for
-    man pages for XZ Utils.
+    XZ Utils.
 
-    The initial version of the threaded .xz decompressor was written
+    The GNU Autotools-based build system contains files from many authors,
-    by Sebastian Andrzej Siewior.
+    which I'm not trying to list here.
 
-    The initial version of the .lz (lzip) decoder was written
+    Several people have contributed fixes or reported bugs. Most of them
-    by Michał Górny.
+    are mentioned in the file THANKS.
-
-    Architecture-specific CRC optimizations were contributed by
-    Ilya Kurdyukov, Hans Jansen, and Chenxi Mao.
-
-    Other authors:
-      - Jonathan Nieder
-      - Joachim Henke
-
-    Many people have contributed improvements or reported bugs.
-    Most of these people are mentioned in the file THANKS.
-
-    The translations of the command line tools and man pages have been
-    contributed by many people via the Translation Project:
-
-      - https://translationproject.org/domain/xz.html
-      - https://translationproject.org/domain/xz-man.html
-
-    The authors of the translated man pages are in the header comments
-    of the man page files. In the source package, the authors of the
-    translations are in po/*.po and po4a/*.po files.
-
-    Third-party code whose authors aren't listed here:
-
-      - GNU getopt_long() in the 'lib' directory is included for
-        platforms that don't have a usable getopt_long().
-
-      - The build system files from GNU Autoconf, GNU Automake,
-        GNU Libtool, GNU Gettext, Autoconf Archive, and related files.
 

COPYING

@@ -6,95 +6,60 @@ XZ Utils Licensing
     is a rough summary of which licenses apply to which parts of this
     package (but check the individual files to be sure!):
 
-      - liblzma is under the BSD Zero Clause License (0BSD).
+      - liblzma is in the public domain.
 
-      - The command line tools xz, xzdec, lzmadec, and lzmainfo are
+      - xz, xzdec, and lzmadec command line tools are in the public
-        under 0BSD except that, on systems that don't have a usable
+        domain unless GNU getopt_long had to be compiled and linked
-        getopt_long, GNU getopt_long is compiled and linked in from the
+        in from the lib directory. The getopt_long code is under
-        'lib' directory. The getopt_long code is under GNU LGPLv2.1+.
+        GNU LGPLv2.1+.
 
       - The scripts to grep, diff, and view compressed files have been
-        adapted from GNU gzip. These scripts (xzgrep, xzdiff, xzless,
+        adapted from gzip. These scripts and their documentation are
-        and xzmore) are under GNU GPLv2+. The man pages of the scripts
+        under GNU GPLv2+.
-        are under 0BSD; they aren't based on the man pages of GNU gzip.
 
-      - Most of the XZ Utils specific documentation that is in
+      - All the documentation in the doc directory and most of the
-        plain text files (like README, INSTALL, PACKAGERS, NEWS,
+        XZ Utils specific documentation files in other directories
-        and ChangeLog) are under 0BSD unless stated otherwise in
+        are in the public domain.
-        the file itself. The files xz-file-format.txt and
-        lzma-file-format.xt are in the public domain but may
-        be distributed under the terms of 0BSD too.
 
-      - Doxygen-generated HTML version of the liblzma API documentation:
+      - Translated messages are in the public domain.
-        While Doxygen is under the GNU GPLv2, the license information
-        in Doxygen includes the following exception:
 
-            Documents produced by doxygen are derivative works
+      - The build system contains public domain files, and files that
-            derived from the input used in their production;
+        are under GNU GPLv2+ or GNU GPLv3+. None of these files end up
-            they are not affected by this license.
+        in the binaries being built.
 
-        Note: The JavaScript files (under the MIT license) have
+      - Test files and test code in the tests directory, and debugging
-        been removed from the Doxygen output.
+        utilities in the debug directory are in the public domain.
 
-      - The XZ logo (xz-logo.png) included in the Doxygen-generated
+      - The extra directory may contain public domain files, and files
-        documentation is under the Creative Commons BY-SA 4.0 license.
+        that are under various free software licenses.
 
-      - Translated messages and man pages are under 0BSD except that
+    You can do whatever you want with the files that have been put into
-        some old translations are in the public domain.
+    the public domain. If you find public domain legally problematic,
+    take the previous sentence as a license grant. If you still find
+    the lack of copyright legally problematic, you have too many
+    lawyers.
 
-      - Test files and test code in the 'tests' directory, and
+    As usual, this software is provided "as is", without any warranty.
-        debugging utilities in the 'debug' directory are under
-        the BSD Zero Clause License (0BSD).
 
-      - The GNU Autotools based build system contains files that are
+    If you copy significant amounts of public domain code from XZ Utils
-        under GNU GPLv2+, GNU GPLv3+, and a few permissive licenses.
-        These files don't affect the licensing of the binaries being
-        built.
-
-      - The extra directory contain files that are under various
-        free software licenses.
-
-    For the files under the BSD Zero Clause License (0BSD), if
-    a copyright notice is needed, the following is sufficient:
-
-        Copyright (C) The XZ Utils authors and contributors
-
-    If you copy significant amounts of 0BSD-licensed code from XZ Utils
     into your project, acknowledging this somewhere in your software is
     polite (especially if it is proprietary, non-free software), but
-    it is not legally required by the license terms. Here is an example
+    naturally it is not legally required. Here is an example of a good
-    of a good notice to put into "about box" or into documentation:
+    notice to put into "about box" or into documentation:
 
-        This software includes code from XZ Utils
+        This software includes code from XZ Utils <http://tukaani.org/xz/>.
-        <https://xz.tukaani.org/xz-utils/>.
 
     The following license texts are included in the following files:
-      - COPYING.0BSD: BSD Zero Clause License
       - COPYING.LGPLv2.1: GNU Lesser General Public License version 2.1
       - COPYING.GPLv2: GNU General Public License version 2
       - COPYING.GPLv3: GNU General Public License version 3
-      - COPYING.CC-BY-SA-4.0: Creative Commons Attribution-ShareAlike 4.0
-                              International Public License
 
-    A note about old XZ Utils releases:
+    Note that the toolchain (compiler, linker etc.) may add some code
+    pieces that are copyrighted. Thus, it is possible that e.g. liblzma
+    binary wouldn't actually be in the public domain in its entirety
+    even though it contains no copyrighted code from the XZ Utils source
+    package.
 
-        XZ Utils releases 5.4.6 and older and 5.5.1alpha have a
+    If you have questions, don't hesitate to ask the author(s) for more
-        significant amount of code put into the public domain and
+    information.
-        that obviously remains so. The switch from public domain to
-        0BSD for newer releases was made in Febrary 2024 because
-        public domain has (real or perceived) legal ambiguities in
-        some jurisdictions.
-
-        There is very little *practical* difference between public
-        domain and 0BSD. The main difference likely is that one
-        shouldn't claim that 0BSD-licensed code is in the public
-        domain; 0BSD-licensed code is copyrighted but available under
-        an extremely permissive license. Neither 0BSD nor public domain
-        require retaining or reproducing author, copyright holder, or
-        license notices when distributing the software. (Compare to,
-        for example, BSD 2-Clause "Simplified" License which does have
-        such requirements.)
-
-    If you have questions, don't hesitate to ask for more information.
-    The contact information is in the README file.
 

COPYING.0BSD

@@ -1,11 +0,0 @@
-Permission to use, copy, modify, and/or distribute this
-software for any purpose with or without fee is hereby granted.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
-WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL
-THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR
-CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
-NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
-CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

COPYING.CC-BY-SA-4.0

@@ -1,427 +0,0 @@
-Attribution-ShareAlike 4.0 International
-
-=======================================================================
-
-Creative Commons Corporation ("Creative Commons") is not a law firm and
-does not provide legal services or legal advice. Distribution of
-Creative Commons public licenses does not create a lawyer-client or
-other relationship. Creative Commons makes its licenses and related
-information available on an "as-is" basis. Creative Commons gives no
-warranties regarding its licenses, any material licensed under their
-terms and conditions, or any related information. Creative Commons
-disclaims all liability for damages resulting from their use to the
-fullest extent possible.
-
-Using Creative Commons Public Licenses
-
-Creative Commons public licenses provide a standard set of terms and
-conditions that creators and other rights holders may use to share
-original works of authorship and other material subject to copyright
-and certain other rights specified in the public license below. The
-following considerations are for informational purposes only, are not
-exhaustive, and do not form part of our licenses.
-
-     Considerations for licensors: Our public licenses are
-     intended for use by those authorized to give the public
-     permission to use material in ways otherwise restricted by
-     copyright and certain other rights. Our licenses are
-     irrevocable. Licensors should read and understand the terms
-     and conditions of the license they choose before applying it.
-     Licensors should also secure all rights necessary before
-     applying our licenses so that the public can reuse the
-     material as expected. Licensors should clearly mark any
-     material not subject to the license. This includes other CC-
-     licensed material, or material used under an exception or
-     limitation to copyright. More considerations for licensors:
-    wiki.creativecommons.org/Considerations_for_licensors
-
-     Considerations for the public: By using one of our public
-     licenses, a licensor grants the public permission to use the
-     licensed material under specified terms and conditions. If
-     the licensor's permission is not necessary for any reason--for
-     example, because of any applicable exception or limitation to
-     copyright--then that use is not regulated by the license. Our
-     licenses grant only permissions under copyright and certain
-     other rights that a licensor has authority to grant. Use of
-     the licensed material may still be restricted for other
-     reasons, including because others have copyright or other
-     rights in the material. A licensor may make special requests,
-     such as asking that all changes be marked or described.
-     Although not required by our licenses, you are encouraged to
-     respect those requests where reasonable. More considerations
-     for the public:
-    wiki.creativecommons.org/Considerations_for_licensees
-
-=======================================================================
-
-Creative Commons Attribution-ShareAlike 4.0 International Public
-License
-
-By exercising the Licensed Rights (defined below), You accept and agree
-to be bound by the terms and conditions of this Creative Commons
-Attribution-ShareAlike 4.0 International Public License ("Public
-License"). To the extent this Public License may be interpreted as a
-contract, You are granted the Licensed Rights in consideration of Your
-acceptance of these terms and conditions, and the Licensor grants You
-such rights in consideration of benefits the Licensor receives from
-making the Licensed Material available under these terms and
-conditions.
-
-
-Section 1 -- Definitions.
-
-  a. Adapted Material means material subject to Copyright and Similar
-     Rights that is derived from or based upon the Licensed Material
-     and in which the Licensed Material is translated, altered,
-     arranged, transformed, or otherwise modified in a manner requiring
-     permission under the Copyright and Similar Rights held by the
-     Licensor. For purposes of this Public License, where the Licensed
-     Material is a musical work, performance, or sound recording,
-     Adapted Material is always produced where the Licensed Material is
-     synched in timed relation with a moving image.
-
-  b. Adapter's License means the license You apply to Your Copyright
-     and Similar Rights in Your contributions to Adapted Material in
-     accordance with the terms and conditions of this Public License.
-
-  c. BY-SA Compatible License means a license listed at
-     creativecommons.org/compatiblelicenses, approved by Creative
-     Commons as essentially the equivalent of this Public License.
-
-  d. Copyright and Similar Rights means copyright and/or similar rights
-     closely related to copyright including, without limitation,
-     performance, broadcast, sound recording, and Sui Generis Database
-     Rights, without regard to how the rights are labeled or
-     categorized. For purposes of this Public License, the rights
-     specified in Section 2(b)(1)-(2) are not Copyright and Similar
-     Rights.
-
-  e. Effective Technological Measures means those measures that, in the
-     absence of proper authority, may not be circumvented under laws
-     fulfilling obligations under Article 11 of the WIPO Copyright
-     Treaty adopted on December 20, 1996, and/or similar international
-     agreements.
-
-  f. Exceptions and Limitations means fair use, fair dealing, and/or
-     any other exception or limitation to Copyright and Similar Rights
-     that applies to Your use of the Licensed Material.
-
-  g. License Elements means the license attributes listed in the name
-     of a Creative Commons Public License. The License Elements of this
-     Public License are Attribution and ShareAlike.
-
-  h. Licensed Material means the artistic or literary work, database,
-     or other material to which the Licensor applied this Public
-     License.
-
-  i. Licensed Rights means the rights granted to You subject to the
-     terms and conditions of this Public License, which are limited to
-     all Copyright and Similar Rights that apply to Your use of the
-     Licensed Material and that the Licensor has authority to license.
-
-  j. Licensor means the individual(s) or entity(ies) granting rights
-     under this Public License.
-
-  k. Share means to provide material to the public by any means or
-     process that requires permission under the Licensed Rights, such
-     as reproduction, public display, public performance, distribution,
-     dissemination, communication, or importation, and to make material
-     available to the public including in ways that members of the
-     public may access the material from a place and at a time
-     individually chosen by them.
-
-  l. Sui Generis Database Rights means rights other than copyright
-     resulting from Directive 96/9/EC of the European Parliament and of
-     the Council of 11 March 1996 on the legal protection of databases,
-     as amended and/or succeeded, as well as other essentially
-     equivalent rights anywhere in the world.
-
-  m. You means the individual or entity exercising the Licensed Rights
-     under this Public License. Your has a corresponding meaning.
-
-
-Section 2 -- Scope.
-
-  a. License grant.
-
-       1. Subject to the terms and conditions of this Public License,
-          the Licensor hereby grants You a worldwide, royalty-free,
-          non-sublicensable, non-exclusive, irrevocable license to
-          exercise the Licensed Rights in the Licensed Material to:
-
-            a. reproduce and Share the Licensed Material, in whole or
-               in part; and
-
-            b. produce, reproduce, and Share Adapted Material.
-
-       2. Exceptions and Limitations. For the avoidance of doubt, where
-          Exceptions and Limitations apply to Your use, this Public
-          License does not apply, and You do not need to comply with
-          its terms and conditions.
-
-       3. Term. The term of this Public License is specified in Section
-          6(a).
-
-       4. Media and formats; technical modifications allowed. The
-          Licensor authorizes You to exercise the Licensed Rights in
-          all media and formats whether now known or hereafter created,
-          and to make technical modifications necessary to do so. The
-          Licensor waives and/or agrees not to assert any right or
-          authority to forbid You from making technical modifications
-          necessary to exercise the Licensed Rights, including
-          technical modifications necessary to circumvent Effective
-          Technological Measures. For purposes of this Public License,
-          simply making modifications authorized by this Section 2(a)
-          (4) never produces Adapted Material.
-
-       5. Downstream recipients.
-
-            a. Offer from the Licensor -- Licensed Material. Every
-               recipient of the Licensed Material automatically
-               receives an offer from the Licensor to exercise the
-               Licensed Rights under the terms and conditions of this
-               Public License.
-
-            b. Additional offer from the Licensor -- Adapted Material.
-               Every recipient of Adapted Material from You
-               automatically receives an offer from the Licensor to
-               exercise the Licensed Rights in the Adapted Material
-               under the conditions of the Adapter's License You apply.
-
-            c. No downstream restrictions. You may not offer or impose
-               any additional or different terms or conditions on, or
-               apply any Effective Technological Measures to, the
-               Licensed Material if doing so restricts exercise of the
-               Licensed Rights by any recipient of the Licensed
-               Material.
-
-       6. No endorsement. Nothing in this Public License constitutes or
-          may be construed as permission to assert or imply that You
-          are, or that Your use of the Licensed Material is, connected
-          with, or sponsored, endorsed, or granted official status by,
-          the Licensor or others designated to receive attribution as
-          provided in Section 3(a)(1)(A)(i).
-
-  b. Other rights.
-
-       1. Moral rights, such as the right of integrity, are not
-          licensed under this Public License, nor are publicity,
-          privacy, and/or other similar personality rights; however, to
-          the extent possible, the Licensor waives and/or agrees not to
-          assert any such rights held by the Licensor to the limited
-          extent necessary to allow You to exercise the Licensed
-          Rights, but not otherwise.
-
-       2. Patent and trademark rights are not licensed under this
-          Public License.
-
-       3. To the extent possible, the Licensor waives any right to
-          collect royalties from You for the exercise of the Licensed
-          Rights, whether directly or through a collecting society
-          under any voluntary or waivable statutory or compulsory
-          licensing scheme. In all other cases the Licensor expressly
-          reserves any right to collect such royalties.
-
-
-Section 3 -- License Conditions.
-
-Your exercise of the Licensed Rights is expressly made subject to the
-following conditions.
-
-  a. Attribution.
-
-       1. If You Share the Licensed Material (including in modified
-          form), You must:
-
-            a. retain the following if it is supplied by the Licensor
-               with the Licensed Material:
-
-                 i. identification of the creator(s) of the Licensed
-                    Material and any others designated to receive
-                    attribution, in any reasonable manner requested by
-                    the Licensor (including by pseudonym if
-                    designated);
-
-                ii. a copyright notice;
-
-               iii. a notice that refers to this Public License;
-
-                iv. a notice that refers to the disclaimer of
-                    warranties;
-
-                 v. a URI or hyperlink to the Licensed Material to the
-                    extent reasonably practicable;
-
-            b. indicate if You modified the Licensed Material and
-               retain an indication of any previous modifications; and
-
-            c. indicate the Licensed Material is licensed under this
-               Public License, and include the text of, or the URI or
-               hyperlink to, this Public License.
-
-       2. You may satisfy the conditions in Section 3(a)(1) in any
-          reasonable manner based on the medium, means, and context in
-          which You Share the Licensed Material. For example, it may be
-          reasonable to satisfy the conditions by providing a URI or
-          hyperlink to a resource that includes the required
-          information.
-
-       3. If requested by the Licensor, You must remove any of the
-          information required by Section 3(a)(1)(A) to the extent
-          reasonably practicable.
-
-  b. ShareAlike.
-
-     In addition to the conditions in Section 3(a), if You Share
-     Adapted Material You produce, the following conditions also apply.
-
-       1. The Adapter's License You apply must be a Creative Commons
-          license with the same License Elements, this version or
-          later, or a BY-SA Compatible License.
-
-       2. You must include the text of, or the URI or hyperlink to, the
-          Adapter's License You apply. You may satisfy this condition
-          in any reasonable manner based on the medium, means, and
-          context in which You Share Adapted Material.
-
-       3. You may not offer or impose any additional or different terms
-          or conditions on, or apply any Effective Technological
-          Measures to, Adapted Material that restrict exercise of the
-          rights granted under the Adapter's License You apply.
-
-
-Section 4 -- Sui Generis Database Rights.
-
-Where the Licensed Rights include Sui Generis Database Rights that
-apply to Your use of the Licensed Material:
-
-  a. for the avoidance of doubt, Section 2(a)(1) grants You the right
-     to extract, reuse, reproduce, and Share all or a substantial
-     portion of the contents of the database;
-
-  b. if You include all or a substantial portion of the database
-     contents in a database in which You have Sui Generis Database
-     Rights, then the database in which You have Sui Generis Database
-     Rights (but not its individual contents) is Adapted Material,
-     including for purposes of Section 3(b); and
-
-  c. You must comply with the conditions in Section 3(a) if You Share
-     all or a substantial portion of the contents of the database.
-
-For the avoidance of doubt, this Section 4 supplements and does not
-replace Your obligations under this Public License where the Licensed
-Rights include other Copyright and Similar Rights.
-
-
-Section 5 -- Disclaimer of Warranties and Limitation of Liability.
-
-  a. UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE
-     EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS
-     AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF
-     ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS,
-     IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION,
-     WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR
-     PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS,
-     ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT
-     KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT
-     ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
-
-  b. TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE
-     TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION,
-     NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT,
-     INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES,
-     COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR
-     USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN
-     ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR
-     DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR
-     IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
-
-  c. The disclaimer of warranties and limitation of liability provided
-     above shall be interpreted in a manner that, to the extent
-     possible, most closely approximates an absolute disclaimer and
-     waiver of all liability.
-
-
-Section 6 -- Term and Termination.
-
-  a. This Public License applies for the term of the Copyright and
-     Similar Rights licensed here. However, if You fail to comply with
-     this Public License, then Your rights under this Public License
-     terminate automatically.
-
-  b. Where Your right to use the Licensed Material has terminated under
-     Section 6(a), it reinstates:
-
-       1. automatically as of the date the violation is cured, provided
-          it is cured within 30 days of Your discovery of the
-          violation; or
-
-       2. upon express reinstatement by the Licensor.
-
-     For the avoidance of doubt, this Section 6(b) does not affect any
-     right the Licensor may have to seek remedies for Your violations
-     of this Public License.
-
-  c. For the avoidance of doubt, the Licensor may also offer the
-     Licensed Material under separate terms or conditions or stop
-     distributing the Licensed Material at any time; however, doing so
-     will not terminate this Public License.
-
-  d. Sections 1, 5, 6, 7, and 8 survive termination of this Public
-     License.
-
-
-Section 7 -- Other Terms and Conditions.
-
-  a. The Licensor shall not be bound by any additional or different
-     terms or conditions communicated by You unless expressly agreed.
-
-  b. Any arrangements, understandings, or agreements regarding the
-     Licensed Material not stated herein are separate from and
-     independent of the terms and conditions of this Public License.
-
-
-Section 8 -- Interpretation.
-
-  a. For the avoidance of doubt, this Public License does not, and
-     shall not be interpreted to, reduce, limit, restrict, or impose
-     conditions on any use of the Licensed Material that could lawfully
-     be made without permission under this Public License.
-
-  b. To the extent possible, if any provision of this Public License is
-     deemed unenforceable, it shall be automatically reformed to the
-     minimum extent necessary to make it enforceable. If the provision
-     cannot be reformed, it shall be severed from this Public License
-     without affecting the enforceability of the remaining terms and
-     conditions.
-
-  c. No term or condition of this Public License will be waived and no
-     failure to comply consented to unless expressly agreed to by the
-     Licensor.
-
-  d. Nothing in this Public License constitutes or may be interpreted
-     as a limitation upon, or waiver of, any privileges and immunities
-     that apply to the Licensor or You, including from the legal
-     processes of any jurisdiction or authority.
-
-
-=======================================================================
-
-Creative Commons is not a party to its public
-licenses. Notwithstanding, Creative Commons may elect to apply one of
-its public licenses to material it publishes and in those instances
-will be considered the “Licensor.” The text of the Creative Commons
-public licenses is dedicated to the public domain under the CC0 Public
-Domain Dedication. Except for the limited purpose of indicating that
-material is shared under a Creative Commons public license or as
-otherwise permitted by the Creative Commons policies published at
-creativecommons.org/policies, Creative Commons does not authorize the
-use of the trademark "Creative Commons" or any other trademark or logo
-of Creative Commons without its prior written consent including,
-without limitation, in connection with any unauthorized modifications
-to any of its public licenses or any other arrangements,
-understandings, or agreements concerning use of licensed material. For
-the avoidance of doubt, this paragraph does not form part of the
-public licenses.
-
-Creative Commons may be contacted at creativecommons.org.

COPYING.GPLv2

@@ -1,12 +1,12 @@
-                    GNU GENERAL PUBLIC LICENSE
+		    GNU GENERAL PUBLIC LICENSE
-                       Version 2, June 1991
+		       Version 2, June 1991
 
  Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
-                            Preamble
+			    Preamble
 
   The licenses for most software are designed to take away your
 freedom to share and change it.  By contrast, the GNU General Public
@@ -56,7 +56,7 @@ patent must be licensed for everyone's free use or not licensed at all.
   The precise terms and conditions for copying, distribution and
 modification follow.
 
-                    GNU GENERAL PUBLIC LICENSE
+		    GNU GENERAL PUBLIC LICENSE
    TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
 
   0. This License applies to any program or other work which contains
@@ -255,7 +255,7 @@ make exceptions for this.  Our decision will be guided by the two goals
 of preserving the free status of all derivatives of our free software and
 of promoting the sharing and reuse of software generally.
 
-                            NO WARRANTY
+			    NO WARRANTY
 
   11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
 FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
@@ -277,9 +277,9 @@ YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
 PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
 POSSIBILITY OF SUCH DAMAGES.
 
-                     END OF TERMS AND CONDITIONS
+		     END OF TERMS AND CONDITIONS
 
-            How to Apply These Terms to Your New Programs
+	    How to Apply These Terms to Your New Programs
 
   If you develop a new program, and you want it to be of the greatest
 possible use to the public, the best way to achieve this is to make it

COPYING.GPLv3

@@ -1,7 +1,7 @@
                     GNU GENERAL PUBLIC LICENSE
                        Version 3, 29 June 2007
 
- Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
@@ -645,7 +645,7 @@ the "copyright" line and a pointer to where the full notice is found.
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 Also add information on how to contact you by electronic and paper mail.
 
@@ -664,11 +664,11 @@ might be different; for a GUI interface, you would use an "about box".
   You should also get your employer (if you work as a programmer) or school,
 if any, to sign a "copyright disclaimer" for the program, if necessary.
 For more information on this, and how to apply and follow the GNU GPL, see
-<https://www.gnu.org/licenses/>.
+<http://www.gnu.org/licenses/>.
 
   The GNU General Public License does not permit incorporating your program
 into proprietary programs.  If your program is a subroutine library, you
 may consider it more useful to permit linking proprietary applications with
 the library.  If this is what you want to do, use the GNU Lesser General
 Public License instead of this License.  But first, please read
-<https://www.gnu.org/licenses/why-not-lgpl.html>.
+<http://www.gnu.org/philosophy/why-not-lgpl.html>.

COPYING.LGPLv2.1

@@ -1,5 +1,5 @@
-                  GNU LESSER GENERAL PUBLIC LICENSE
+		  GNU LESSER GENERAL PUBLIC LICENSE
-                       Version 2.1, February 1999
+		       Version 2.1, February 1999
 
  Copyright (C) 1991, 1999 Free Software Foundation, Inc.
  51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
@@ -10,7 +10,7 @@
  as the successor of the GNU Library Public License, version 2, hence
  the version number 2.1.]
 
-                            Preamble
+			    Preamble
 
   The licenses for most software are designed to take away your
 freedom to share and change it.  By contrast, the GNU General Public
@@ -112,7 +112,7 @@ modification follow.  Pay close attention to the difference between a
 former contains code derived from the library, whereas the latter must
 be combined with the library in order to run.
 
-                  GNU LESSER GENERAL PUBLIC LICENSE
+		  GNU LESSER GENERAL PUBLIC LICENSE
    TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
 
   0. This License Agreement applies to any software library or other
@@ -146,7 +146,7 @@ such a program is covered only if its contents constitute a work based
 on the Library (independent of the use of the Library in a tool for
 writing it).  Whether that is true depends on what the Library does
 and what the program that uses the Library does.
-
+  
   1. You may copy and distribute verbatim copies of the Library's
 complete source code as you receive it, in any medium, provided that
 you conspicuously and appropriately publish on each copy an
@@ -432,7 +432,7 @@ decision will be guided by the two goals of preserving the free status
 of all derivatives of our free software and of promoting the sharing
 and reuse of software generally.
 
-                            NO WARRANTY
+			    NO WARRANTY
 
   15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
 WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
@@ -455,7 +455,7 @@ FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
 SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
 DAMAGES.
 
-                     END OF TERMS AND CONDITIONS
+		     END OF TERMS AND CONDITIONS
 
            How to Apply These Terms to Your New Libraries
 
@@ -500,3 +500,5 @@ necessary.  Here is a sample; alter the names:
   Ty Coon, President of Vice
 
 That's all there is to it!
+
+

ChangeLog

@@ -1,6 +1,6 @@
 See the commit log in the git repository:
 
-    git clone https://github.com/tukaani-project/xz
+    git clone http://git.tukaani.org/xz.git
 
 Note that "make dist" doesn't put this tiny file into the package.
 Instead, the git commit log is used as ChangeLog. See dist-hook in

INSTALL

@@ -14,7 +14,6 @@ XZ Utils Installation
             1.2.6. Tru64
             1.2.7. Windows
             1.2.8. DOS
-            1.2.9. z/OS
        1.3. Adding support for new platforms
     2. configure options
        2.1. Static vs. dynamic linking of liblzma
@@ -22,16 +21,13 @@ XZ Utils Installation
     3. xzgrep and other scripts
        3.1. Dependencies
        3.2. PATH
-    4. Tests
+    4. Troubleshooting
-       4.1 Testing in parallel
+       4.1. "No C99 compiler was found."
-       4.2 Cross compiling
+       4.2. "No POSIX conforming shell (sh) was found."
-    5. Troubleshooting
+       4.3. configure works but build fails at crc32_x86.S
-       5.1. "No C99 compiler was found."
+       4.4. Lots of warnings about symbol visibility
-       5.2. "No POSIX conforming shell (sh) was found."
+       4.5. "make check" fails
-       5.3. configure works but build fails at crc32_x86.S
+       4.6. liblzma.so (or similar) not found when running xz
-       5.4. Lots of warnings about symbol visibility
-       5.5. "make check" fails
-       5.6. liblzma.so (or similar) not found when running xz
 
 
 0. Preface
@@ -103,7 +99,7 @@ XZ Utils Installation
     XZ Utils doesn't have code to detect the amount of physical RAM and
     number of CPU cores on MINIX 3.
 
-    See section 5.4 in this file about symbol visibility warnings (you
+    See section 4.4 in this file about symbol visibility warnings (you
     may want to pass gl_cv_cc_visibility=no to configure).
 
 
@@ -126,83 +122,42 @@ XZ Utils Installation
     This can be worked around by passing gl_cv_cc_visibility=no
     as an argument to the configure script.
 
-    test_scripts.sh in "make check" may fail if good enough tools are
-    missing from PATH (/usr/xpg4/bin or /usr/xpg6/bin). Nowadays
-    /usr/xpg4/bin is added to the script PATH by default on Solaris
-    (see --enable-path-for-scripts=PREFIX in section 2), but old xz
-    releases needed extra steps. See sections 5.5 and 3.2 for more
-    information.
-
 
 1.2.6. Tru64
 
     If you try to use the native C compiler on Tru64 (passing CC=cc to
-    configure), you may need the workaround mention in section 5.1 in
+    configure), you may need the workaround mention in section 4.1 in
     this file (pass also ac_cv_prog_cc_c99= to configure).
 
 
 1.2.7. Windows
 
-    The "windows" directory contains instructions for a few types
+    Building XZ Utils on Windows is supported under MinGW + MSYS,
-    of builds:
+    MinGW-w64 + MSYS, and Cygwin. There is windows/build.bash to
+    ease packaging XZ Utils with MinGW(-w64) + MSYS into a
+    redistributable .zip or .7z file. See windows/INSTALL-Windows.txt
+    for more information.
 
-      - INSTALL-MinGW-w64_with_CMake.txt
+    It might be possible to build liblzma with a non-GNU toolchain too,
-                Simple instructions how to build XZ Utils natively on
+    but that will probably require writing a separate makefile. Building
-                Windows using only CMake and a prebuilt toolchain
+    the command line tools with non-GNU toolchains will be harder than
-                (GCC + MinGW-w64 or Clang/LLVM + MinGW-w64).
+    building only liblzma.
 
-      - INSTALL-MinGW-w64_with_Autotools.txt
+    Even if liblzma is built with MinGW, the resulting DLL or static
-                Native build under MSYS2 or cross-compilation from
+    library can be used by other compilers and linkers, including MSVC.
-                GNU/Linux using a bash script that creates a .zip
+    Thus, it shouldn't be a problem to use MinGW to build liblzma even
-                and .7z archives of the binaries and documentation.
+    if you cannot use MinGW to build the rest of your project. See
-                The related file README-Windows.txt is for the
+    windows/README-Windows.txt for details.
-                resulting binary package.
-
-      - INSTALL-MSVC.txt
-                Building with MSVC / Visual Studio and CMake.
-
-      - liblzma-crt-mixing.txt
-                Documentation what to take into account as a programmer
-                if liblzma.dll and the application don't use the same
-                CRT (MSVCRT or UCRT).
-
-    Other choices:
-
-      - Cygwin: https://cygwin.com/
-        Building on Cygwin can be done like on many POSIX operating
-        systems. XZ Utils >= 5.2.0 isn't compatible with Cygwin older
-        than 1.7.35 (data loss!). 1.7.35 was released on 2015-03-04.
-
-      - MSYS2: https://www.msys2.org/
 
 
 1.2.8. DOS
 
-    There is a Makefile in the "dos" directory to build XZ Utils on
+    There is an experimental Makefile in the "dos" directory to build
-    DOS using DJGPP. Support for long file names (LFN) is needed at
+    XZ Utils on DOS using DJGPP. Support for long file names (LFN) is
-    build time but the resulting xz.exe works without LFN support too.
+    needed. See dos/README for more information.
-    See dos/INSTALL.txt and dos/README.txt for more information.
 
-
+    GNU Autotools based build hasn't been tried on DOS. If you try, I
-1.2.9. z/OS
+    would like to hear if it worked.
-
-    To build XZ Utils on z/OS UNIX System Services using xlc, pass
-    these options to the configure script: CC='xlc -qhaltonmsg=CCN3296'
-    CPPFLAS='-D_UNIX03_THREADS -D_XOPEN_SOURCE=600'. The first makes
-    xlc throw an error if a header file is missing, which is required
-    to make the tests in configure work. The CPPFLAGS are needed to
-    get pthread support (some other CPPFLAGS may work too; if there
-    are problems, try -D_UNIX95_THREADS instead of -D_UNIX03_THREADS).
-
-    test_scripts.sh in "make check" will fail even if the scripts
-    actually work because the test data includes compressed files
-    with US-ASCII text.
-
-    No other tests should fail. If test_files.sh fails, check that
-    the included .xz test files weren't affected by EBCDIC conversion.
-
-    XZ Utils doesn't have code to detect the amount of physical RAM and
-    number of CPU cores on z/OS.
 
 
 1.3. Adding support for new platforms
@@ -275,54 +230,6 @@ XZ Utils Installation
                 the liblzma ABI, so this option should be used only when
                 it is known to not cause problems.
 
-    --enable-external-sha256
-                Try to use SHA-256 code from the operating system libc
-                or similar base system libraries. This doesn't try to
-                use OpenSSL or libgcrypt or such libraries.
-
-                The reasons to use this option:
-
-                  - It makes liblzma slightly smaller.
-
-                  - It might improve SHA-256 speed if the implementation
-                    in the operating is very good (but see below).
-
-                External SHA-256 is disabled by default for two reasons:
-
-                  - On some operating systems the symbol names of the
-                    SHA-256 functions conflict with OpenSSL's libcrypto.
-                    This causes weird problems such as decompression
-                    errors if an application is linked against both
-                    liblzma and libcrypto. This problem affects at least
-                    FreeBSD 10 and older and MINIX 3.3.0 and older, but
-                    other OSes that provide a function "SHA256_Init" might
-                    also be affected. FreeBSD 11 has the problem fixed.
-                    NetBSD had the problem but it was fixed it in 2009
-                    already. OpenBSD uses "SHA256Init" and thus never had
-                    a conflict with libcrypto.
-
-                  - The SHA-256 code in liblzma is faster than the SHA-256
-                    code provided by some operating systems. If you are
-                    curious, build two copies of xz (internal and external
-                    SHA-256) and compare the decompression (xz --test)
-                    times:
-
-                        dd if=/dev/zero bs=1024k count=1024 \
-                            | xz -v -0 -Csha256 > foo.xz
-                        time xz --test foo.xz
-
-    --disable-microlzma
-                Don't build MicroLZMA encoder and decoder. This omits
-                lzma_microlzma_encoder() and lzma_microlzma_decoder()
-                API functions from liblzma. These functions are needed
-                by specific applications only. They were written for
-                erofs-utils but they may be used by others too.
-
-    --disable-lzip-decoder
-                Disable decompression support for .lz (lzip) files.
-                This omits the API function lzma_lzip_decoder() from
-                liblzma and .lz support from the xz tool.
-
     --disable-xz
     --disable-xzdec
     --disable-lzmadec
@@ -353,102 +260,28 @@ XZ Utils Installation
                 with --docdir=DIR.
 
     --disable-assembler
-                This disables CRC32 and CRC64 assembly code on
+                liblzma includes some assembler optimizations. Currently
-                32-bit x86. This option currently does nothing
+                there is only assembler code for CRC32 and CRC64 for
-                on other architectures (not even on x86-64).
+                32-bit x86.
 
-                The 32-bit x86 assembly is position-independent code
+                All the assembler code in liblzma is position-independent
-                which is suitable for use in shared libraries and
+                code, which is suitable for use in shared libraries and
-                position-independent executables. It uses only i386
+                position-independent executables. So far only i386
-                instructions but the code is optimized for i686 class
+                instructions are used, but the code is optimized for i686
-                CPUs. If you are compiling liblzma exclusively for
+                class CPUs. If you are compiling liblzma exclusively for
                 pre-i686 systems, you may want to disable the assembler
                 code.
 
-    --disable-clmul-crc
-                Disable the use of carryless multiplication for CRC
-                calculation even if compiler support for it is detected.
-                The code uses runtime detection of SSSE3, SSE4.1, and
-                CLMUL instructions on x86. On 32-bit x86 this currently
-                is used only if --disable-assembler is used (this might
-                be fixed in the future). The code works on E2K too.
-
-                If using compiler options that unconditionally allow the
-                required extensions (-msse4.1 -mpclmul) then runtime
-                detection isn't used and the generic code is omitted.
-
-    --disable-arm64-crc32
-                Disable the use of the ARM64 CRC32 instruction extension
-                even if compiler support for it is detected. The code will
-                detect support for the instruction at runtime.
-
-                If using compiler options that unconditionally allow the
-                required extensions (-march=armv8-a+crc or -march=armv8.1-a
-                and later) then runtime detection isn't used and the
-                generic code is omitted.
-
     --enable-unaligned-access
-                Allow liblzma to use unaligned memory access for 16-bit,
+                Allow liblzma to use unaligned memory access for 16-bit
-                32-bit, and 64-bit loads and stores. This should be
+                and 32-bit loads and stores. This should be enabled only
-                enabled only when the hardware supports this, that is,
+                when the hardware supports this, i.e. when unaligned
-                when unaligned access is fast. Some operating system
+                access is fast. Some operating system kernels emulate
-                kernels emulate unaligned access, which is extremely
+                unaligned access, which is extremely slow. This option
-                slow. This option shouldn't be used on systems that
+                shouldn't be used on systems that rely on such emulation.
-                rely on such emulation.
 
-                Unaligned access is enabled by default on these:
+                Unaligned access is enabled by default on x86, x86-64,
-                  - 32-bit x86
+                and big endian PowerPC.
-                  - 64-bit x86-64
-                  - 32-bit big endian PowerPC
-                  - 64-bit big endian PowerPC
-                  - 64-bit little endian PowerPC
-                  - some RISC-V [1]
-                  - some 32-bit ARM [2]
-                  - some 64-bit ARM64 [2] (NOTE: Autodetection bug
-                    if using GCC -mstrict-align, see below.)
-
-                [1] Unaligned access is enabled by default if
-                    configure sees that the C compiler
-                    #defines __riscv_misaligned_fast.
-
-                [2] Unaligned access is enabled by default if
-                    configure sees that the C compiler
-                    #defines __ARM_FEATURE_UNALIGNED:
-
-                      - ARMv7 + GCC or Clang: It works. The options
-                        -munaligned-access and -mno-unaligned-access
-                        affect this macro correctly.
-
-                      - ARM64 + Clang: It works. The options
-                        -munaligned-access, -mno-unaligned-access,
-                        and -mstrict-align affect this macro correctly.
-                        Clang >= 17 supports -mno-strict-align too.
-
-                      - ARM64 + GCC: It partially works. The macro
-                        is always #defined by GCC versions at least
-                        up to 13.2, even when using -mstrict-align.
-                        If building for strict-align ARM64, the
-                        configure option --disable-unaligned-access
-                        should be used if using a GCC version that has
-                        this issue because otherwise the performance
-                        may be degraded. It likely won't crash due to
-                        how unaligned access is done in the C code.
-
-    --enable-unsafe-type-punning
-                This enables use of code like
-
-                    uint8_t *buf8 = ...;
-                    *(uint32_t *)buf8 = ...;
-
-                which violates strict aliasing rules and may result
-                in broken code. There should be no need to use this
-                option with recent GCC or Clang versions on any
-                arch as just as fast code can be generated in a safe
-                way too (using __builtin_assume_aligned + memcpy).
-
-                However, this option might improve performance in some
-                other cases, especially with old compilers (for example,
-                GCC 3 and early 4.x on x86, GCC < 6 on ARMv6 and ARMv7).
 
     --enable-small
                 Reduce the size of liblzma by selecting smaller but
@@ -482,124 +315,16 @@ XZ Utils Installation
                 the amount of RAM on the operating system you use. See
                 src/common/tuklib_physmem.c for details.
 
-    --enable-threads=METHOD
+    --disable-threads
-                Threading support is enabled by default so normally there
+                Disable threading support. This makes some things
-                is no need to specify this option.
+                thread-unsafe, meaning that if multithreaded application
+                calls liblzma functions from more than one thread,
+                something bad may happen.
 
-                Supported values for METHOD:
+                Use this option if threading support causes you trouble,
-
+                or if you know that you will use liblzma only from
-                        yes     Autodetect the threading method. If none
+                single-threaded applications and want to avoid dependency
-                                is found, configure will give an error.
+                on libpthread.
-
-                        posix   Use POSIX pthreads. This is the default
-                                except on Windows outside Cygwin.
-
-                        win95   Use Windows 95 compatible threads. This
-                                is compatible with Windows XP and later
-                                too. This is the default for 32-bit x86
-                                Windows builds. Unless the compiler
-                                supports __attribute__((__constructor__)),
-                                the 'win95' threading is incompatible with
-                                --enable-small.
-
-                        vista   Use Windows Vista compatible threads. The
-                                resulting binaries won't run on Windows XP
-                                or older. This is the default for Windows
-                                excluding 32-bit x86 builds (that is, on
-                                x86-64 the default is 'vista').
-
-                        no      Disable threading support. This is the
-                                same as using --disable-threads.
-                                NOTE: If combined with --enable-small
-                                and the compiler doesn't support
-                                __attribute__((__constructor__)), the
-                                resulting liblzma won't be thread safe,
-                                that is, if a multi-threaded application
-                                calls any liblzma functions from more than
-                                one thread, something bad may happen.
-
-    --enable-ifunc
-                Use __attribute__((__ifunc__())) in liblzma. This is
-                enabled by default on GNU/Linux and FreeBSD.
-
-                The ifunc attribute is incompatible with
-                -fsanitize=address. --disable-ifunc must be used
-                if any -fsanitize= option is specified in CFLAGS.
-
-    --enable-sandbox=METHOD
-                There is limited sandboxing support in the xz and xzdec
-                tools. If built with sandbox support, xz uses it
-                automatically when (de)compressing exactly one file to
-                standard output when the options --files or --files0 aren't
-                used. This is a common use case, for example,
-                (de)compressing .tar.xz files via GNU tar. The sandbox is
-                also used for single-file 'xz --test' or 'xz --list'.
-                xzdec always uses the sandbox, except when more than one
-                file are decompressed. In this case it will enable the
-                sandbox for the last file that is decompressed.
-
-                Supported METHODs:
-
-                        auto    Look for a supported sandboxing method
-                                and use it if found. If no method is
-                                found, then sandboxing isn't used.
-                                This is the default.
-
-                        no      Disable sandboxing support.
-
-                        capsicum
-                                Use Capsicum (FreeBSD >= 10.2) for
-                                sandboxing. If no Capsicum support
-                                is found, configure will give an error.
-
-                        pledge  Use pledge(2) (OpenBSD >= 5.9) for
-                                sandboxing. If pledge(2) isn't found,
-                                configure will give an error.
-
-                        landlock
-                                Use Landlock (Linux >= 5.13) for
-                                sandboxing. If no Landlock support
-                                is found, configure will give an error.
-
-    --enable-symbol-versions[=VARIANT]
-                Use symbol versioning for liblzma shared library.
-                This is enabled by default on GNU/Linux (glibc only),
-                other GNU-based systems, and FreeBSD.
-
-                Symbol versioning is never used for static liblzma. This
-                option is ignored when not building a shared library.
-
-                Supported VARIANTs:
-
-                        no      Disable symbol versioning. This is the
-                                same as using --disable-symbol-versions.
-
-                        auto    Autodetect between "no", "linux",
-                                and "generic".
-
-                        yes     Autodetect between "linux" and
-                                "generic". This forces symbol
-                                versioning to be used when
-                                building a shared library.
-
-                        generic Generic version is the default for
-                                FreeBSD and GNU/Linux on MicroBlaze.
-
-                                This is also used on GNU/Linux when
-                                building with NVIDIA HPC Compiler
-                                because the compiler doesn't support
-                                the features required for the "linux"
-                                variant below.
-
-                        linux   Special version for GNU/Linux (glibc
-                                only). This adds a few extra symbol
-                                versions for compatibility with binaries
-                                that have been linked against a liblzma
-                                version that has been patched with
-                                "xz-5.2.2-compat-libs.patch" from
-                                RHEL/CentOS 7. That patch was used
-                                by some build tools outside of
-                                RHEL/CentOS 7 too.
 
     --enable-debug
                 This enables the assert() macro and possibly some other
@@ -612,23 +337,6 @@ XZ Utils Installation
                 and should work on most systems. This has no effect on the
                 resulting binaries.
 
-    --enable-path-for-scripts=PREFIX
-                If PREFIX isn't empty, PATH=PREFIX:$PATH will be set in
-                the beginning of the scripts (xzgrep and others).
-                The default is empty except on Solaris the default is
-                /usr/xpg4/bin.
-
-                This can be useful if the default PATH doesn't contain
-                modern POSIX tools (as can be the case on Solaris) or if
-                one wants to ensure that the correct xz binary is in the
-                PATH for the scripts. Note that the latter use can break
-                "make check" if the prefixed PATH causes a wrong xz binary
-                (other than the one that was just built) to be used.
-
-                Older xz releases support a different method for setting
-                the PATH for the scripts. It is described in section 3.2
-                and is supported in this xz version too.
-
 
 2.1. Static vs. dynamic linking of liblzma
 
@@ -658,7 +366,7 @@ XZ Utils Installation
         liblzma, pass --enable-small to configure.
 
       - Tell the compiler to optimize for size instead of speed.
-        For example, with GCC, put -Os into CFLAGS.
+        E.g. with GCC, put -Os into CFLAGS.
 
       - xzdec and lzmadec will never use multithreading capabilities of
         liblzma. You can avoid dependency on libpthread by passing
@@ -687,31 +395,20 @@ XZ Utils Installation
     gl_cv_posix_shell=/path/to/posix-sh as an argument to the configure
     script.
 
-    xzdiff (xzcmp/lzdiff/lzcmp) may use mktemp if it is available. As
+    Some of the scripts require also mktemp. The original mktemp can be
-    a fallback xzdiff will use mkdir to securely create a temporary
+    found from <http://www.mktemp.org/>. On GNU, most will use the mktemp
-    directory. Having mktemp available is still recommended since the
+    program from GNU coreutils instead of the original implementation.
-    mkdir fallback method isn't as robust as mktemp is. The original
+    Both mktemp versions are fine for XZ Utils (and practically for
-    mktemp can be found from <https://www.mktemp.org/>. On GNU, most will
+    everything else too).
-    use the mktemp program from GNU coreutils instead of the original
-    implementation. Both mktemp versions are fine.
-
-    In addition to using xz to decompress .xz files, xzgrep and xzdiff
-    use gzip, bzip2, and lzop to support .gz, bz2, and .lzo files.
 
 
 3.2. PATH
 
-    The method described below is supported by older xz releases.
-    It is supported by the current version too, but the newer
-    --enable-path-for-scripts=PREFIX described in section 2 may be
-    more convenient.
-
     The scripts assume that the required tools (standard POSIX utilities,
-    mktemp, and xz) are in PATH; the scripts don't set the PATH themselves
+    mktemp, and xz) are in PATH; the scripts don't set the PATH themselves.
-    (except as described for --enable-path-for-scripts=PREFIX). Some
+    Some people like this while some think this is a bug. Those in the
-    people like this while some think this is a bug. Those in the latter
+    latter group can easily patch the scripts before running the configure
-    group can easily patch the scripts before running the configure script
+    script by taking advantage of a placeholder line in the scripts.
-    by taking advantage of a placeholder line in the scripts.
 
     For example, to make the scripts prefix /usr/bin:/bin to PATH:
 
@@ -719,54 +416,10 @@ XZ Utils Installation
                 src/scripts/xz*.in
 
 
-4. Tests
+4. Troubleshooting
---------
-
-    The test framework can be built and run by executing "make check" in
-    the build directory. The tests are a mix of executables and POSIX
-    shell scripts (sh). All tests should pass if the default configuration
-    is used. Disabling features through the configure options may cause
-    some tests to be skipped. If any tests do not pass, see section 5.5.
-
-
-4.1. Testing in parallel
-
-    The tests can be run in parallel using the "-j" make option on systems
-    that support it. For instance, "make -j4 check" will run up to four
-    tests simultaneously.
-
-
-4.2. Cross compiling
-
-    The tests can be built without running them:
-
-        make check TESTS=
-
-    The TESTS variable is the list of tests you wish to run. Leaving it
-    empty will compile the tests without running any.
-
-    If the tests are copied to a target machine to execute, the test data
-    files in the directory tests/files must also be copied. The tests
-    search for the data files using the environment variable $srcdir,
-    expecting to find the data files under $srcdir/files/. If $srcdir
-    isn't set then it defaults to the current directory.
-
-    The shell script tests can be copied from the source directory to the
-    target machine to execute. In addition to the test files, these tests
-    will expect the following relative file paths to execute properly:
-
-        ./create_compress_files
-        ../config.h
-        ../src/xz/xz
-        ../src/xzdec/xzdec
-        ../src/scripts/xzdiff
-        ../src/scripts/xzgrep
-
-
-5. Troubleshooting
 ------------------
 
-5.1. "No C99 compiler was found."
+4.1. "No C99 compiler was found."
 
     You need a C99 compiler to build XZ Utils. If the configure script
     cannot find a C99 compiler and you think you have such a compiler
@@ -781,17 +434,16 @@ XZ Utils Installation
     support enough C99.
 
 
-5.2. "No POSIX conforming shell (sh) was found."
+4.2. "No POSIX conforming shell (sh) was found."
 
     xzgrep and other scripts need a shell that (roughly) conforms
     to POSIX. The configure script tries to find such a shell. If
     it fails, you can force the shell to be used by passing
     gl_cv_posix_shell=/path/to/posix-sh as an argument to the configure
-    script. Alternatively you can omit the installation of scripts and
+    script.
-    this error by passing --disable-scripts to configure.
 
 
-5.3. configure works but build fails at crc32_x86.S
+4.3. configure works but build fails at crc32_x86.S
 
     The easy fix is to pass --disable-assembler to the configure script.
 
@@ -808,7 +460,7 @@ XZ Utils Installation
     (see INSTALL.generic).
 
 
-5.4. Lots of warnings about symbol visibility
+4.4. Lots of warnings about symbol visibility
 
     On some systems where symbol visibility isn't supported, GCC may
     still accept the visibility options and attributes, which will make
@@ -820,7 +472,7 @@ XZ Utils Installation
     using --enable-werror.
 
 
-5.5. "make check" fails
+4.5. "make check" fails
 
     If the other tests pass but test_scripts.sh fails, then the problem
     is in the scripts in src/scripts. Comparing the contents of
@@ -829,9 +481,8 @@ XZ Utils Installation
     some tools are missing from the current PATH or the tools lack
     support for some POSIX features. This can happen at least on
     Solaris where the tools in /bin may be ancient but good enough
-    tools are available in /usr/xpg4/bin or /usr/xpg6/bin. For possible
+    tools are available in /usr/xpg4/bin or /usr/xpg6/bin. One fix
-    fixes, see --enable-path-for-scripts=PREFIX in section 2 and the
+    for this problem is described in section 3.2 of this file.
-    older alternative method described in section 3.2 of this file.
 
     If tests other than test_scripts.sh fail, a likely reason is that
     libtool links the test programs against an installed version of
@@ -846,7 +497,7 @@ XZ Utils Installation
     information.
 
 
-5.6. liblzma.so (or similar) not found when running xz
+4.6. liblzma.so (or similar) not found when running xz
 
     If you installed the package with "make install" and get an error
     about liblzma.so (or a similarly named file) being missing, try

INSTALL.generic

@@ -1,8 +1,8 @@
 Installation Instructions
 *************************
 
-   Copyright (C) 1994-1996, 1999-2002, 2004-2016 Free Software
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-Foundation, Inc.
+2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
 
    Copying and distribution of this file, with or without modification,
 are permitted in any medium without royalty provided the copyright
@@ -12,96 +12,97 @@ without warranty of any kind.
 Basic Installation
 ==================
 
-   Briefly, the shell command './configure && make && make install'
+   Briefly, the shell commands `./configure; make; make install' should
-should configure, build, and install this package.  The following
+configure, build, and install this package.  The following
-more-detailed instructions are generic; see the 'README' file for
+more-detailed instructions are generic; see the `README' file for
 instructions specific to this package.  Some packages provide this
-'INSTALL' file but do not implement all of the features documented
+`INSTALL' file but do not implement all of the features documented
 below.  The lack of an optional feature in a given package is not
 necessarily a bug.  More recommendations for GNU packages can be found
 in *note Makefile Conventions: (standards)Makefile Conventions.
 
-   The 'configure' shell script attempts to guess correct values for
+   The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
-those values to create a 'Makefile' in each directory of the package.
+those values to create a `Makefile' in each directory of the package.
-It may also create one or more '.h' files containing system-dependent
+It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script 'config.status' that
+definitions.  Finally, it creates a shell script `config.status' that
 you can run in the future to recreate the current configuration, and a
-file 'config.log' containing compiler output (useful mainly for
+file `config.log' containing compiler output (useful mainly for
-debugging 'configure').
+debugging `configure').
 
-   It can also use an optional file (typically called 'config.cache' and
+   It can also use an optional file (typically called `config.cache'
-enabled with '--cache-file=config.cache' or simply '-C') that saves the
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
-results of its tests to speed up reconfiguring.  Caching is disabled by
+the results of its tests to speed up reconfiguring.  Caching is
-default to prevent problems with accidental use of stale cache files.
+disabled by default to prevent problems with accidental use of stale
+cache files.
 
    If you need to do unusual things to compile the package, please try
-to figure out how 'configure' could check whether to do them, and mail
+to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the 'README' so they can
+diffs or instructions to the address given in the `README' so they can
 be considered for the next release.  If you are using the cache, and at
-some point 'config.cache' contains results you don't want to keep, you
+some point `config.cache' contains results you don't want to keep, you
 may remove or edit it.
 
-   The file 'configure.ac' (or 'configure.in') is used to create
+   The file `configure.ac' (or `configure.in') is used to create
-'configure' by a program called 'autoconf'.  You need 'configure.ac' if
+`configure' by a program called `autoconf'.  You need `configure.ac' if
-you want to change it or regenerate 'configure' using a newer version of
+you want to change it or regenerate `configure' using a newer version
-'autoconf'.
+of `autoconf'.
 
    The simplest way to compile this package is:
 
-  1. 'cd' to the directory containing the package's source code and type
+  1. `cd' to the directory containing the package's source code and type
-     './configure' to configure the package for your system.
+     `./configure' to configure the package for your system.
 
-     Running 'configure' might take a while.  While running, it prints
+     Running `configure' might take a while.  While running, it prints
      some messages telling which features it is checking for.
 
-  2. Type 'make' to compile the package.
+  2. Type `make' to compile the package.
 
-  3. Optionally, type 'make check' to run any self-tests that come with
+  3. Optionally, type `make check' to run any self-tests that come with
      the package, generally using the just-built uninstalled binaries.
 
-  4. Type 'make install' to install the programs and any data files and
+  4. Type `make install' to install the programs and any data files and
      documentation.  When installing into a prefix owned by root, it is
      recommended that the package be configured and built as a regular
-     user, and only the 'make install' phase executed with root
+     user, and only the `make install' phase executed with root
      privileges.
 
-  5. Optionally, type 'make installcheck' to repeat any self-tests, but
+  5. Optionally, type `make installcheck' to repeat any self-tests, but
      this time using the binaries in their final installed location.
      This target does not install anything.  Running this target as a
-     regular user, particularly if the prior 'make install' required
+     regular user, particularly if the prior `make install' required
      root privileges, verifies that the installation completed
      correctly.
 
   6. You can remove the program binaries and object files from the
-     source code directory by typing 'make clean'.  To also remove the
+     source code directory by typing `make clean'.  To also remove the
-     files that 'configure' created (so you can compile the package for
+     files that `configure' created (so you can compile the package for
-     a different kind of computer), type 'make distclean'.  There is
+     a different kind of computer), type `make distclean'.  There is
-     also a 'make maintainer-clean' target, but that is intended mainly
+     also a `make maintainer-clean' target, but that is intended mainly
      for the package's developers.  If you use it, you may have to get
      all sorts of other programs in order to regenerate files that came
      with the distribution.
 
-  7. Often, you can also type 'make uninstall' to remove the installed
+  7. Often, you can also type `make uninstall' to remove the installed
      files again.  In practice, not all packages have tested that
      uninstallation works correctly, even though it is required by the
      GNU Coding Standards.
 
-  8. Some packages, particularly those that use Automake, provide 'make
+  8. Some packages, particularly those that use Automake, provide `make
      distcheck', which can by used by developers to test that all other
-     targets like 'make install' and 'make uninstall' work correctly.
+     targets like `make install' and `make uninstall' work correctly.
      This target is generally not run by end users.
 
 Compilers and Options
 =====================
 
    Some systems require unusual options for compilation or linking that
-the 'configure' script does not know about.  Run './configure --help'
+the `configure' script does not know about.  Run `./configure --help'
 for details on some of the pertinent environment variables.
 
-   You can give 'configure' initial values for configuration parameters
+   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here is
+by setting variables in the command line or in the environment.  Here
-an example:
+is an example:
 
      ./configure CC=c99 CFLAGS=-g LIBS=-lposix
 
@@ -112,21 +113,21 @@ Compiling For Multiple Architectures
 
    You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
-own directory.  To do this, you can use GNU 'make'.  'cd' to the
+own directory.  To do this, you can use GNU `make'.  `cd' to the
 directory where you want the object files and executables to go and run
-the 'configure' script.  'configure' automatically checks for the source
+the `configure' script.  `configure' automatically checks for the
-code in the directory that 'configure' is in and in '..'.  This is known
+source code in the directory that `configure' is in and in `..'.  This
-as a "VPATH" build.
+is known as a "VPATH" build.
 
-   With a non-GNU 'make', it is safer to compile the package for one
+   With a non-GNU `make', it is safer to compile the package for one
 architecture at a time in the source code directory.  After you have
-installed the package for one architecture, use 'make distclean' before
+installed the package for one architecture, use `make distclean' before
 reconfiguring for another architecture.
 
    On MacOS X 10.5 and later systems, you can create libraries and
 executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple '-arch' options to the
+"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single '-arch' option to the preprocessor.  Like
+compiler but only a single `-arch' option to the preprocessor.  Like
 this:
 
      ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
@@ -135,104 +136,100 @@ this:
 
    This is not guaranteed to produce working output in all cases, you
 may have to build one architecture at a time and combine the results
-using the 'lipo' tool if you have problems.
+using the `lipo' tool if you have problems.
 
 Installation Names
 ==================
 
-   By default, 'make install' installs the package's commands under
+   By default, `make install' installs the package's commands under
-'/usr/local/bin', include files under '/usr/local/include', etc.  You
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than '/usr/local' by giving
+can specify an installation prefix other than `/usr/local' by giving
-'configure' the option '--prefix=PREFIX', where PREFIX must be an
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
 absolute file name.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-pass the option '--exec-prefix=PREFIX' to 'configure', the package uses
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
 PREFIX as the prefix for installing programs and libraries.
 Documentation and other data files still use the regular prefix.
 
    In addition, if you use an unusual directory layout you can give
-options like '--bindir=DIR' to specify different values for particular
+options like `--bindir=DIR' to specify different values for particular
-kinds of files.  Run 'configure --help' for a list of the directories
+kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.  In general, the default
+you can set and what kinds of files go in them.  In general, the
-for these options is expressed in terms of '${prefix}', so that
+default for these options is expressed in terms of `${prefix}', so that
-specifying just '--prefix' will affect all of the other directory
+specifying just `--prefix' will affect all of the other directory
 specifications that were not explicitly provided.
 
    The most portable way to affect installation locations is to pass the
-correct locations to 'configure'; however, many packages provide one or
+correct locations to `configure'; however, many packages provide one or
 both of the following shortcuts of passing variable assignments to the
-'make install' command line to change installation locations without
+`make install' command line to change installation locations without
 having to reconfigure or recompile.
 
    The first method involves providing an override variable for each
-affected directory.  For example, 'make install
+affected directory.  For example, `make install
 prefix=/alternate/directory' will choose an alternate location for all
 directory configuration variables that were expressed in terms of
-'${prefix}'.  Any directories that were specified during 'configure',
+`${prefix}'.  Any directories that were specified during `configure',
-but not in terms of '${prefix}', must each be overridden at install time
+but not in terms of `${prefix}', must each be overridden at install
-for the entire installation to be relocated.  The approach of makefile
+time for the entire installation to be relocated.  The approach of
-variable overrides for each directory variable is required by the GNU
+makefile variable overrides for each directory variable is required by
-Coding Standards, and ideally causes no recompilation.  However, some
+the GNU Coding Standards, and ideally causes no recompilation.
-platforms have known limitations with the semantics of shared libraries
+However, some platforms have known limitations with the semantics of
-that end up requiring recompilation when using this method, particularly
+shared libraries that end up requiring recompilation when using this
-noticeable in packages that use GNU Libtool.
+method, particularly noticeable in packages that use GNU Libtool.
 
-   The second method involves providing the 'DESTDIR' variable.  For
+   The second method involves providing the `DESTDIR' variable.  For
-example, 'make install DESTDIR=/alternate/directory' will prepend
+example, `make install DESTDIR=/alternate/directory' will prepend
-'/alternate/directory' before all installation names.  The approach of
+`/alternate/directory' before all installation names.  The approach of
-'DESTDIR' overrides is not required by the GNU Coding Standards, and
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
 does not work on platforms that have drive letters.  On the other hand,
 it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of '${prefix}'
+when some directory options were not specified in terms of `${prefix}'
-at 'configure' time.
+at `configure' time.
 
 Optional Features
 =================
 
    If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving 'configure' the
+with an extra prefix or suffix on their names by giving `configure' the
-option '--program-prefix=PREFIX' or '--program-suffix=SUFFIX'.
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
 
-   Some packages pay attention to '--enable-FEATURE' options to
+   Some packages pay attention to `--enable-FEATURE' options to
-'configure', where FEATURE indicates an optional part of the package.
+`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to '--with-PACKAGE' options, where PACKAGE
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like 'gnu-as' or 'x' (for the X Window System).  The
+is something like `gnu-as' or `x' (for the X Window System).  The
-'README' should mention any '--enable-' and '--with-' options that the
+`README' should mention any `--enable-' and `--with-' options that the
 package recognizes.
 
-   For packages that use the X Window System, 'configure' can usually
+   For packages that use the X Window System, `configure' can usually
 find the X include and library files automatically, but if it doesn't,
-you can use the 'configure' options '--x-includes=DIR' and
+you can use the `configure' options `--x-includes=DIR' and
-'--x-libraries=DIR' to specify their locations.
+`--x-libraries=DIR' to specify their locations.
 
    Some packages offer the ability to configure how verbose the
-execution of 'make' will be.  For these packages, running './configure
+execution of `make' will be.  For these packages, running `./configure
 --enable-silent-rules' sets the default to minimal output, which can be
-overridden with 'make V=1'; while running './configure
+overridden with `make V=1'; while running `./configure
 --disable-silent-rules' sets the default to verbose, which can be
-overridden with 'make V=0'.
+overridden with `make V=0'.
 
 Particular systems
 ==================
 
-   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU CC
+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
-is not installed, it is recommended to use the following options in
+CC is not installed, it is recommended to use the following options in
 order to use an ANSI C compiler:
 
      ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
 
 and if that doesn't work, install pre-built binaries of GCC for HP-UX.
 
-   HP-UX 'make' updates targets which have the same time stamps as their
-prerequisites, which makes it generally unusable when shipped generated
-files such as 'configure' are involved.  Use GNU 'make' instead.
-
    On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its '<wchar.h>' header file.  The option '-nodtk' can be used as a
+parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
-workaround.  If GNU CC is not installed, it is therefore recommended to
+a workaround.  If GNU CC is not installed, it is therefore recommended
-try
+to try
 
      ./configure CC="cc"
 
@@ -240,26 +237,26 @@ and if that doesn't work, try
 
      ./configure CC="cc -nodtk"
 
-   On Solaris, don't put '/usr/ucb' early in your 'PATH'.  This
+   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
 directory contains several dysfunctional programs; working variants of
-these programs are available in '/usr/bin'.  So, if you need '/usr/ucb'
+these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
-in your 'PATH', put it _after_ '/usr/bin'.
+in your `PATH', put it _after_ `/usr/bin'.
 
-   On Haiku, software installed for all users goes in '/boot/common',
+   On Haiku, software installed for all users goes in `/boot/common',
-not '/usr/local'.  It is recommended to use the following options:
+not `/usr/local'.  It is recommended to use the following options:
 
      ./configure --prefix=/boot/common
 
 Specifying the System Type
 ==========================
 
-   There may be some features 'configure' cannot figure out
+   There may be some features `configure' cannot figure out
 automatically, but needs to determine by the type of machine the package
 will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, 'configure' can figure that out, but if it prints
+_same_ architectures, `configure' can figure that out, but if it prints
 a message saying it cannot guess the machine type, give it the
-'--build=TYPE' option.  TYPE can either be a short name for the system
+`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as 'sun4', or a canonical name which has the form:
+type, such as `sun4', or a canonical name which has the form:
 
      CPU-COMPANY-SYSTEM
 
@@ -268,101 +265,101 @@ where SYSTEM can have one of these forms:
      OS
      KERNEL-OS
 
-   See the file 'config.sub' for the possible values of each field.  If
+   See the file `config.sub' for the possible values of each field.  If
-'config.sub' isn't included in this package, then this package doesn't
+`config.sub' isn't included in this package, then this package doesn't
 need to know the machine type.
 
    If you are _building_ compiler tools for cross-compiling, you should
-use the option '--target=TYPE' to select the type of system they will
+use the option `--target=TYPE' to select the type of system they will
 produce code for.
 
    If you want to _use_ a cross compiler, that generates code for a
 platform different from the build platform, you should specify the
 "host" platform (i.e., that on which the generated programs will
-eventually be run) with '--host=TYPE'.
+eventually be run) with `--host=TYPE'.
 
 Sharing Defaults
 ================
 
-   If you want to set default values for 'configure' scripts to share,
+   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called 'config.site' that gives
+you can create a site shell script called `config.site' that gives
-default values for variables like 'CC', 'cache_file', and 'prefix'.
+default values for variables like `CC', `cache_file', and `prefix'.
-'configure' looks for 'PREFIX/share/config.site' if it exists, then
+`configure' looks for `PREFIX/share/config.site' if it exists, then
-'PREFIX/etc/config.site' if it exists.  Or, you can set the
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
-'CONFIG_SITE' environment variable to the location of the site script.
+`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all 'configure' scripts look for a site script.
+A warning: not all `configure' scripts look for a site script.
 
 Defining Variables
 ==================
 
    Variables not defined in a site shell script can be set in the
-environment passed to 'configure'.  However, some packages may run
+environment passed to `configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
-them in the 'configure' command line, using 'VAR=value'.  For example:
+them in the `configure' command line, using `VAR=value'.  For example:
 
      ./configure CC=/usr/local2/bin/gcc
 
-causes the specified 'gcc' to be used as the C compiler (unless it is
+causes the specified `gcc' to be used as the C compiler (unless it is
 overridden in the site shell script).
 
-Unfortunately, this technique does not work for 'CONFIG_SHELL' due to an
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-Autoconf limitation.  Until the limitation is lifted, you can use this
+an Autoconf bug.  Until the bug is fixed you can use this workaround:
-workaround:
 
-     CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
+     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
 
-'configure' Invocation
+`configure' Invocation
 ======================
 
-   'configure' recognizes the following options to control how it
+   `configure' recognizes the following options to control how it
 operates.
 
-'--help'
+`--help'
-'-h'
+`-h'
-     Print a summary of all of the options to 'configure', and exit.
+     Print a summary of all of the options to `configure', and exit.
 
-'--help=short'
+`--help=short'
-'--help=recursive'
+`--help=recursive'
      Print a summary of the options unique to this package's
-     'configure', and exit.  The 'short' variant lists options used only
+     `configure', and exit.  The `short' variant lists options used
-     in the top level, while the 'recursive' variant lists options also
+     only in the top level, while the `recursive' variant lists options
-     present in any nested packages.
+     also present in any nested packages.
 
-'--version'
+`--version'
-'-V'
+`-V'
-     Print the version of Autoconf used to generate the 'configure'
+     Print the version of Autoconf used to generate the `configure'
      script, and exit.
 
-'--cache-file=FILE'
+`--cache-file=FILE'
      Enable the cache: use and save the results of the tests in FILE,
-     traditionally 'config.cache'.  FILE defaults to '/dev/null' to
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
      disable caching.
 
-'--config-cache'
+`--config-cache'
-'-C'
+`-C'
-     Alias for '--cache-file=config.cache'.
+     Alias for `--cache-file=config.cache'.
 
-'--quiet'
+`--quiet'
-'--silent'
+`--silent'
-'-q'
+`-q'
      Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to '/dev/null' (any error
+     suppress all normal output, redirect it to `/dev/null' (any error
      messages will still be shown).
 
-'--srcdir=DIR'
+`--srcdir=DIR'
      Look for the package's source code in directory DIR.  Usually
-     'configure' can determine that directory automatically.
+     `configure' can determine that directory automatically.
 
-'--prefix=DIR'
+`--prefix=DIR'
-     Use DIR as the installation prefix.  *note Installation Names:: for
+     Use DIR as the installation prefix.  *note Installation Names::
-     more details, including other options available for fine-tuning the
+     for more details, including other options available for fine-tuning
-     installation locations.
+     the installation locations.
 
-'--no-create'
+`--no-create'
-'-n'
+`-n'
      Run the configure checks, but stop before creating any output
      files.
 
-'configure' also accepts some other, not widely useful, options.  Run
+`configure' also accepts some other, not widely useful, options.  Run
-'configure --help' for more details.
+`configure --help' for more details.
+

Makefile.am

@@ -1,5 +1,9 @@
-## SPDX-License-Identifier: 0BSD
+##
 ## Author: Lasse Collin
+##
+## This file has been put into the public domain.
+## You can do whatever you want with this file.
+##
 
 # Use -n to prevent gzip from adding a timestamp to the .gz headers.
 GZIP_ENV = -9n
@@ -17,11 +21,11 @@ if COND_DOC
 dist_doc_DATA = \
 	AUTHORS \
 	COPYING \
-	COPYING.0BSD \
 	COPYING.GPLv2 \
 	NEWS \
 	README \
 	THANKS \
+	TODO \
 	doc/faq.txt \
 	doc/history.txt \
 	doc/xz-file-format.txt \
@@ -33,47 +37,32 @@ dist_examples_DATA = \
 	doc/examples/01_compress_easy.c \
 	doc/examples/02_decompress.c \
 	doc/examples/03_compress_custom.c \
-	doc/examples/04_compress_easy_mt.c \
-	doc/examples/11_file_info.c \
 	doc/examples/Makefile
 
-# Install the Doxygen generated documentation if they were built.
+examplesolddir = $(docdir)/examples_old
-install-data-local:
+dist_examplesold_DATA = \
-	if test -d "$(srcdir)/doc/api" ; then \
+	doc/examples_old/xz_pipe_comp.c \
-		$(MKDIR_P) "$(DESTDIR)$(docdir)/api" && \
+	doc/examples_old/xz_pipe_decomp.c
-		$(INSTALL_DATA) "$(srcdir)"/doc/api/* \
-			"$(DESTDIR)$(docdir)/api"; \
-	fi
-
-# Remove the Doxygen generated documentation when uninstalling.
-uninstall-local:
-	rm -rf "$(DESTDIR)$(docdir)/api"
 endif
 
 EXTRA_DIST = \
-	cmake \
-	dos \
-	doxygen \
 	extra \
-	po4a \
+	dos \
 	windows \
-	CMakeLists.txt \
+	macosx \
-	COPYING.CC-BY-SA-4.0 \
+	autogen.sh \
+	Doxyfile.in \
 	COPYING.GPLv2 \
 	COPYING.GPLv3 \
 	COPYING.LGPLv2.1 \
 	INSTALL.generic \
 	PACKAGERS \
-	TODO \
-	autogen.sh \
 	build-aux/manconv.sh \
-	build-aux/version.sh \
+	build-aux/version.sh
-	doc/xz-logo.png \
-	po/xz.pot-header
 
 ACLOCAL_AMFLAGS = -I m4
 
-# List of man pages to convert to PDF and plain text in the dist-hook target.
+# List of man pages to conver to PDF and plain text in the dist-hook target.
 manfiles = \
 	src/xz/xz.1 \
 	src/xzdec/xzdec.1 \
@@ -87,8 +76,7 @@ manfiles = \
 # Convert the man pages to PDF and plain text (ASCII only) formats.
 dist-hook:
 	if test -d "$(srcdir)/.git" && type git > /dev/null 2>&1; then \
-		( cd "$(srcdir)" && git log --date=iso --stat \
+		( cd "$(srcdir)" && git log --date=iso --stat ) \
-			b69da6d4bb6bb11fc0cf066920791990d2b22a06^..HEAD ) \
 			> "$(distdir)/ChangeLog"; \
 	fi
 	if type groff > /dev/null 2>&1 && type ps2pdf > /dev/null 2>&1; then \
@@ -107,19 +95,9 @@ dist-hook:
 				> "$$dest/txt/$$BASE.txt"; \
 		done; \
 	fi
-	if test -d "$(srcdir)/doc/api" ; then \
-		$(MKDIR_P) "$(distdir)/doc/api" && \
-		$(INSTALL_DATA) "$(srcdir)"/doc/api/* \
-			"$(distdir)/doc/api"; \
-	fi
 
 # This works with GNU tar and gives cleaner package than normal 'make dist'.
-# This also ensures that the man page translations are up to date (dist-hook
-# would be too late for that).
 mydist:
-	sh "$(srcdir)/src/liblzma/validate_map.sh"
-	cd "$(srcdir)/po4a" && sh update-po
-	cd "$(srcdir)/doxygen" && sh update-doxygen
 	VERSION=$(VERSION); \
 	if test -d "$(srcdir)/.git" && type git > /dev/null 2>&1; then \
 		SNAPSHOT=`cd "$(srcdir)" && git describe --abbrev=4 | cut -b2-`; \

PACKAGERS

@@ -44,8 +44,6 @@ Information to packagers of XZ Utils
                         lzmadec binary for compatibility with LZMA Utils
         liblzma         liblzma.so.*
         liblzma-devel   liblzma.so, liblzma.a, API headers
-        liblzma-doc     Doxygen-generated liblzma API docs (HTML),
-                        example programs
 
 
 2. Package description
@@ -111,28 +109,20 @@ Information to packagers of XZ Utils
         This package includes the API headers, static library, and
         other development files related to liblzma.
 
-    liblzma-doc:
-
-        liblzma API documentation in HTML and example usage
-
-        This package includes the Doxygen-generated liblzma API
-        HTML docs and example programs showing how to use liblzma.
-
 
 3. License
 ----------
 
     If the package manager supports a license field, you probably should
     put GPLv2+ there (GNU GPL v2 or later). The interesting parts of
-    XZ Utils are under the BSD Zero Clause License (0BSD), but some less
+    XZ Utils are in the public domain, but some less important files
-    important files ending up into the binary package are under GPLv2+.
+    ending up into the binary package are under GPLv2+. So it is simplest
-    So it is simplest to just say GPLv2+ if you cannot specify
+    to just say GPLv2+ if you cannot specify "public domain and GPLv2+".
-    "BSD0 and GPLv2+".
 
     If you split XZ Utils into multiple packages as described earlier
     in this file, liblzma and liblzma-dev packages will contain only
-    0BSD-licensed code from XZ Utils (compiler or linker may add some
+    public domain code (from XZ Utils at least; compiler or linker may
-    third-party code which may have other licenses).
+    add some third-party code, which may be copyrighted).
 
 
 4. configure options
@@ -148,8 +138,6 @@ Information to packagers of XZ Utils
         --enable-checks
         --enable-small (*)
         --disable-threads (*)
-        --disable-microlzma (*)
-        --disable-lzip-decoder (*)
 
     (*) These are OK when building xzdec and lzmadec as described
         in INSTALL.
@@ -170,13 +158,12 @@ Information to packagers of XZ Utils
     can be replaced with a symlink if your distro ships with shared
     copies of the common license texts.
 
-    The Doxygen-generated documentation (HTML) for the liblzma API
+    liblzma API is currently only documented using Doxygen tags in the
-    headers is included in the source release and will be installed by
+    API headers. It hasn't been tested much how good results Doxygen
-    "make install" to $docdir/api. All JavaScript is removed to
+    is able to make from the tags (e.g. Doxyfile might need tweaking,
-    simplify license compliance and to reduce the install size. If the
+    the tagging may need to be improved etc.), so it might be simpler
-    liblzma API documentation is not desired, either run configure with
+    to just let people read docs directly from the .h files for now,
-    --disable-doc or remove the doc/api directory before running
+    and also save quite a bit in package size at the same time.
-    "make install".
 
 
 6. Extra files

README

@@ -9,7 +9,7 @@ XZ Utils
        1.3. Documentation for liblzma
     2. Version numbering
     3. Reporting bugs
-    4. Translations
+    4. Translating the xz tool
     5. Other implementations of the .xz format
     6. Contact information
 
@@ -55,11 +55,9 @@ XZ Utils
     Similarly, it is possible that some day there is a filter that will
     compress better than LZMA2.
 
-    XZ Utils supports multithreaded compression. XZ Utils doesn't support
+    XZ Utils doesn't support multithreaded compression or decompression
-    multithreaded decompression yet. It has been planned though and taken
+    yet. It has been planned though and taken into account when designing
-    into account when designing the .xz file format. In the future, files
+    the .xz file format.
-    that were created in threaded mode can be decompressed in threaded
-    mode too.
 
 
 1. Documentation
@@ -67,27 +65,24 @@ XZ Utils
 
 1.1. Overall documentation
 
-    README                This file
+    README              This file
 
-    INSTALL.generic       Generic install instructions for those not
+    INSTALL.generic     Generic install instructions for those not familiar
-                          familiar with packages using GNU Autotools
+                        with packages using GNU Autotools
-    INSTALL               Installation instructions specific to XZ Utils
+    INSTALL             Installation instructions specific to XZ Utils
-    PACKAGERS             Information to packagers of XZ Utils
+    PACKAGERS           Information to packagers of XZ Utils
 
-    COPYING               XZ Utils copyright and license information
+    COPYING             XZ Utils copyright and license information
-    COPYING.0BSD          BSD Zero Clause License
+    COPYING.GPLv2       GNU General Public License version 2
-    COPYING.GPLv2         GNU General Public License version 2
+    COPYING.GPLv3       GNU General Public License version 3
-    COPYING.GPLv3         GNU General Public License version 3
+    COPYING.LGPLv2.1    GNU Lesser General Public License version 2.1
-    COPYING.LGPLv2.1      GNU Lesser General Public License version 2.1
-    COPYING.CC-BY-SA-4.0  Creative Commons Attribution-ShareAlike 4.0
-                          International Public License
 
-    AUTHORS               The main authors of XZ Utils
+    AUTHORS             The main authors of XZ Utils
-    THANKS                Incomplete list of people who have helped making
+    THANKS              Incomplete list of people who have helped making
-                          this software
+                        this software
-    NEWS                  User-visible changes between XZ Utils releases
+    NEWS                User-visible changes between XZ Utils releases
-    ChangeLog             Detailed list of changes (commit log)
+    ChangeLog           Detailed list of changes (commit log)
-    TODO                  Known bugs and some sort of to-do list
+    TODO                Known bugs and some sort of to-do list
 
     Note that only some of the above files are included in binary
     packages.
@@ -108,16 +103,17 @@ XZ Utils
     and data type as Doxygen tags. These docs should be quite OK as
     a quick reference.
 
-    There are a few example/tutorial programs that should help in
+    I have planned to write a bunch of very well documented example
-    getting started with liblzma. In the source package the examples
+    programs, which (due to comments) should work as a tutorial to
-    are in "doc/examples" and in binary packages they may be under
+    various features of liblzma. No such example programs have been
-    "examples" in the same directory as this README.
+    written yet.
 
-    Since the liblzma API has similarities to the zlib API, some people
+    For now, if you have never used liblzma, libbzip2, or zlib, I
-    may find it useful to read the zlib docs and tutorial too:
+    recommend learning the *basics* of the zlib API. Once you know that,
+    it should be easier to learn liblzma.
 
-        https://zlib.net/manual.html
+        http://zlib.net/manual.html
-        https://zlib.net/zlib_how.html
+        http://zlib.net/zlib_how.html
 
 
 2. Version numbering
@@ -196,19 +192,19 @@ XZ Utils
     system.
 
 
-4. Translations
+4. Translating the xz tool
----------------
+--------------------------
 
-    The xz command line tool and all man pages can be translated.
+    The messages from the xz tool have been translated into a few
-    The translations are handled via the Translation Project. If you
+    languages. Before starting to translate into a new language, ask
-    wish to help translating xz, please join the Translation Project:
+    the author whether someone else hasn't already started working on it.
 
-        https://translationproject.org/html/translators.html
+    Test your translation. Testing includes comparing the translated
+    output to the original English version by running the same commands
+    in both your target locale and with LC_ALL=C. Ask someone to
+    proof-read and test the translation.
 
-    Below are notes and testing instructions specific to xz
+    Testing can be done e.g. by installing xz into a temporary directory:
-    translations.
-
-    Testing can be done by installing xz into a temporary directory:
 
         ./configure --disable-shared --prefix=/tmp/xz-test
         # <Edit the .po file in the po directory.>
@@ -261,11 +257,14 @@ XZ Utils
         at the beginning and end of the strings.
 
       - Read the TRANSLATORS comments that have been extracted from the
-        source code and included in xz.pot. Some comments suggest
+        source code and included in xz.pot. If they suggest testing the
-        testing with a specific command which needs an .xz file. You
+        translation with some type of command, do it. If testing needs
-        may use e.g. any tests/files/good-*.xz. However, these test
+        input files, use e.g. tests/files/good-*.xz.
-        commands are included in translations.bash output, so reading
+
-        translations.bash output carefully can be enough.
+      - When updating the translation, read the fuzzy (modified) strings
+        carefully, and don't mark them as updated before you actually
+        have updated them. Reading through the unchanged messages can be
+        good too; sometimes you may find a better wording for them.
 
       - If you find language problems in the original English strings,
         feel free to suggest improvements. Ask if something is unclear.
@@ -275,7 +274,9 @@ XZ Utils
         make a direct word-by-word translation from English especially if
         the result doesn't sound good in your language.
 
-    Thanks for your help!
+    In short, take your time and pay attention to the details. Making
+    a good translation is not a quick and trivial thing to do. The
+    translated xz should look as polished as the English version.
 
 
 5. Other implementations of the .xz format
@@ -284,27 +285,24 @@ XZ Utils
     7-Zip and the p7zip port of 7-Zip support the .xz format starting
     from the version 9.00alpha.
 
-        https://7-zip.org/
+        http://7-zip.org/
-        https://p7zip.sourceforge.net/
+        http://p7zip.sourceforge.net/
 
     XZ Embedded is a limited implementation written for use in the Linux
     kernel, but it is also suitable for other embedded use.
 
-        https://xz.tukaani.org/xz-embedded/
+        http://tukaani.org/xz/embedded.html
-
-    XZ for Java is a complete implementation written in pure Java.
-
-        https://xz.tukaani.org/xz-for-java/
 
 
 6. Contact information
 ----------------------
 
     If you have questions, bug reports, patches etc. related to XZ Utils,
-    the project maintainers Lasse Collin and Jia Tan can be reached via
+    contact Lasse Collin <lasse.collin@tukaani.org> (in Finnish or English).
-    <xz@tukaani.org>.
+    I'm sometimes slow at replying. If you haven't got a reply within two
+    weeks, assume that your email has got lost and resend it or use IRC.
 
-    You might find Lasse also from #tukaani on Libera Chat (IRC).
+    You can find me also from #tukaani on Freenode; my nick is Larhzu.
-    The nick is Larhzu. The channel tends to be pretty quiet,
+    The channel tends to be pretty quiet, so just ask your question and
-    so just ask your question and someone might wake up.
+    someone may wake up.
 

THANKS

@@ -5,174 +5,89 @@ Thanks
 Some people have helped more, some less, but nevertheless everyone's help
 has been important. :-) In alphabetical order:
   - Mark Adler
-  - Kian-Meng Ang
   - H. Peter Anvin
   - Jeff Bastian
   - Nelson H. F. Beebe
-  - Karl Beldan
   - Karl Berry
   - Anders F. Björklund
   - Emmanuel Blot
-  - Melanie Blower
-  - Alexander Bluhm
   - Martin Blumenstingl
-  - Ben Boeckel
   - Jakub Bogusz
-  - Adam Borowski
   - Maarten Bosmans
-  - Lukas Braune
-  - Benjamin Buch
   - Trent W. Buck
-  - Kevin R. Bulgrien
   - James Buren
   - David Burklund
-  - Frank Busse
   - Daniel Mealha Cabrita
   - Milo Casagrande
   - Marek Černocký
   - Tomer Chachamu
-  - Vitaly Chikunov
-  - Antoine Cœur
-  - Gabi Davar
-  - İhsan Doğan
   - Chris Donawa
   - Andrew Dudman
   - Markus Duft
   - İsmail Dönmez
-  - Paul Eggert
   - Robert Elz
   - Gilles Espinasse
   - Denis Excoffier
-  - Vincent Fazio
   - Michael Felt
-  - Michael Fox
   - Mike Frysinger
   - Daniel Richard G.
-  - Tomasz Gajc
-  - Bjarni Ingi Gislason
-  - John Paul Adrian Glaubitz
-  - Bill Glessner
-  - Matthew Good
-  - Michał Górny
   - Jason Gorski
   - Juan Manuel Guerrero
-  - Gabriela Gutierrez
-  - Diederik de Haas
   - Joachim Henke
-  - Christian Hesse
-  - Vincenzo Innocente
   - Peter Ivanov
-  - Nicholas Jackson
-  - Sam James
-  - Hajin Jang
-  - Hans Jansen
   - Jouk Jansen
-  - Jun I Jin
-  - Kiyoshi Kanazawa
-  - Joona Kannisto
   - Per Øyvind Karlsen
-  - Iouri Kharon
   - Thomas Klausner
   - Richard Koch
-  - Anton Kochkov
   - Ville Koskinen
-  - Sergey Kosukhin
-  - Marcin Kowalczyk
-  - Jan Kratochvil
-  - Christian Kujau
   - Stephan Kulow
-  - Ilya Kurdyukov
   - Peter Lawler
-  - James M Leddy
-  - Kelvin Lee
-  - Vincent Lefevre
   - Hin-Tak Leung
   - Andraž 'ruskie' Levstik
   - Cary Lewis
   - Wim Lewis
-  - Xin Li
-  - Eric Lindblad
   - Lorenzo De Liso
-  - H.J. Lu
   - Bela Lubkin
-  - Chenxi Mao
   - Gregory Margo
-  - Julien Marrec
-  - Ed Maste
-  - Martin Matuška
-  - Ivan A. Melnikov
   - Jim Meyering
-  - Arkadiusz Miskiewicz
-  - Nathan Moinvaziri
-  - Étienne Mollier
   - Conley Moorhous
   - Rafał Mużyło
   - Adrien Nader
-  - Evan Nemerson
   - Hongbo Ni
   - Jonathan Nieder
   - Andre Noll
   - Peter O'Gorman
-  - Dimitri Papadopoulos Orfanos
-  - Daniel Packard
-  - Filip Palian
   - Peter Pallinger
-  - Rui Paulo
   - Igor Pavlov
   - Diego Elio Pettenò
   - Elbert Pol
   - Mikko Pouru
-  - Rich Prohaska
-  - Trần Ngọc Quân
   - Pavel Raiskup
-  - Ole André Vadla Ravnås
-  - Eric S. Raymond
   - Robert Readman
   - Bernhard Reutner-Fischer
-  - Markus Rickert
+  - Eric S. Raymond
   - Cristian Rodríguez
   - Christian von Roques
-  - Boud Roukema
-  - Torsten Rupp
-  - Stephen Sachs
   - Jukka Salmi
-  - Agostino Sarubbo
   - Alexandre Sauvé
   - Benno Schulenberg
   - Andreas Schwab
-  - Bhargava Shastry
   - Dan Shechter
   - Stuart Shelton
-  - Sebastian Andrzej Siewior
-  - Ville Skyttä
-  - Brad Smith
-  - Bruce Stark
-  - Pippijn van Steenhoven
-  - Martin Storsjö
   - Jonathan Stott
   - Dan Stromberg
-  - Jia Tan
-  - Vincent Torri
-  - Alexey Tourbin
   - Paul Townsend
   - Mohammed Adnène Trojette
-  - Taiki Tsunekawa
+  - Alexey Tourbin
-  - Maksym Vatsyk
-  - Loganaden Velvindron
   - Patrick J. Volkerding
   - Martin Väth
-  - Adam Walling
-  - Jeffrey Walton
   - Christian Weisgerber
-  - Dan Weiss
   - Bert Wesarg
   - Fredrik Wikstrom
-  - Jim Wilcoxson
   - Ralf Wildenhues
   - Charles Wilson
   - Lars Wirzenius
   - Pilorz Wojciech
-  - Chien Wong
   - Ryan Young
   - Andreas Zieringer
 

TODO

@@ -24,36 +24,20 @@ Known bugs
 
     tuklib_exit() doesn't block signals => EINTR is possible.
 
-    If liblzma has created threads and fork() gets called, liblzma
+    SIGTSTP is not handled. If xz is stopped, the estimated remaining
-    code will break in the child process unless it calls exec() and
+    time and calculated (de)compression speed won't make sense in the
-    doesn't touch liblzma.
+    progress indicator (xz --verbose).
 
 
 Missing features
 ----------------
 
-    Add support for storing metadata in .xz files. A preliminary
-    idea is to create a new Stream type for metadata. When both
-    metadata and data are wanted in the same .xz file, two or more
-    Streams would be concatenated.
-
-    The state stored in lzma_stream should be cloneable, which would
-    be mostly useful when using a preset dictionary in LZMA2, but
-    it may have other uses too. Compare to deflateCopy() in zlib.
-
-    Support LZMA_FINISH in raw decoder to indicate end of LZMA1 and
-    other streams that don't have an end of payload marker.
-
-    Adjust dictionary size when the input file size is known.
-    Maybe do this only if an option is given.
-
     xz doesn't support copying extended attributes, access control
     lists etc. from source to target file.
 
-    Multithreaded compression:
+    Multithreaded compression
-      - Reduce memory usage of the current method.
+
-      - Implement threaded match finders.
+    Multithreaded decompression
-      - Implement pigz-style threading in LZMA2.
 
     Buffer-to-buffer coding could use less RAM (especially when
     decompressing LZMA1 or LZMA2).
@@ -62,44 +46,18 @@ Missing features
     It will be a separate library that supports uncompressed, .gz,
     .bz2, .lzma, and .xz files.
 
-    Support changing lzma_options_lzma.mode with lzma_filters_update().
-
-    Support LZMA_FULL_FLUSH for lzma_stream_decoder() to stop at
-    Block and Stream boundaries.
-
     lzma_strerror() to convert lzma_ret to human readable form?
     This is tricky, because the same error codes are used with
     slightly different meanings, and this cannot be fixed anymore.
 
-    Make it possible to adjust LZMA2 options in the middle of a Block
-    so that the encoding speed vs. compression ratio can be optimized
-    when the compressed data is streamed over network.
-
-    Improved BCJ filters. The current filters are small but they aren't
-    so great when compressing binary packages that contain various file
-    types. Specifically, they make things worse if there are static
-    libraries or Linux kernel modules. The filtering could also be
-    more effective (without getting overly complex), for example,
-    streamable variant BCJ2 from 7-Zip could be implemented.
-
-    Filter that autodetects specific data types in the input stream
-    and applies appropriate filters for the corrects parts of the input.
-    Perhaps combine this with the BCJ filter improvement point above.
-
-    Long-range LZ77 method as a separate filter or as a new LZMA2
-    match finder.
-
 
 Documentation
 -------------
 
-    More tutorial programs are needed for liblzma.
+    Some tutorial is needed for liblzma. I have planned to write some
+    extremely well commented example programs, which would work as
+    a tutorial. I suppose the Doxygen tags are quite OK as a quick
+    reference once one is familiar with the liblzma API.
 
     Document the LZMA1 and LZMA2 algorithms.
 
-
-Miscellaneous
-------------
-
-    Try to get the media type for .xz registered at IANA.
-

autogen.sh

@@ -1,54 +1,22 @@
 #!/bin/sh
-# SPDX-License-Identifier: 0BSD
 
 ###############################################################################
 #
 # Author: Lasse Collin
 #
+# This file has been put into the public domain.
+# You can do whatever you want with this file.
+#
 ###############################################################################
 
+# The result of using "autoreconf -fi" should be identical to using this
+# script. I'm leaving this script here just in case someone finds it useful.
+
 set -e -x
 
-# The following six lines are almost identical to "autoreconf -fi" but faster.
 ${AUTOPOINT:-autopoint} -f
 ${LIBTOOLIZE:-libtoolize} -c -f || glibtoolize -c -f
 ${ACLOCAL:-aclocal} -I m4
 ${AUTOCONF:-autoconf}
 ${AUTOHEADER:-autoheader}
 ${AUTOMAKE:-automake} -acf --foreign
-
-# Generate the translated man pages and the doxygen documentation if the
-# "po4a" and "doxygen" tools are available.
-# This is *NOT* done by "autoreconf -fi" or when "make" is run.
-# Pass --no-po4a or --no-doxygen to this script to skip these steps.
-# It can be useful when you know that po4a or doxygen aren't available and
-# don't want autogen.sh to exit with non-zero exit status.
-generate_po4a="y"
-generate_doxygen="y"
-
-for arg in "$@"
-do
-	case $arg in
-		"--no-po4a")
-			generate_po4a="n"
-			;;
-
-		"--no-doxygen")
-			generate_doxygen="n"
-			;;
-	esac
-done
-
-if test "$generate_po4a" != "n"; then
-	cd po4a
-	sh update-po
-	cd ..
-fi
-
-if test "$generate_doxygen" != "n"; then
-	cd doxygen
-	sh update-doxygen
-	cd ..
-fi
-
-exit 0

build-aux/ci_build.sh

@@ -1,287 +0,0 @@
-#!/bin/bash
-# SPDX-License-Identifier: 0BSD
-
-#############################################################################
-#
-# Script meant to be used for Continuous Integration automation for POSIX
-# systems. On GitHub, this is used by Ubuntu and MacOS builds.
-#
-#############################################################################
-#
-# Author: Jia Tan
-#
-#############################################################################
-
-set -e
-
-USAGE="Usage: $0
-  -a [autogen flags]
-  -b [autotools|cmake]
-  -c [crc32|crc64|sha256]
-  -d [encoders|decoders|bcj|delta|threads|shared|nls|small|ifunc|clmul|sandbox]
-  -f [CFLAGS]
-  -l [destdir]
-  -m [compiler]
-  -n [ARTIFACTS_DIR_NAME]
-  -p [all|build|test]
-  -s [srcdir]"
-
-# Absolute path of script directory
-ABS_DIR=$(cd -- "$(dirname -- "$0")" && pwd)
-
-# Default CLI option values
-AUTOGEN_FLAGS=""
-BUILD_SYSTEM="autotools"
-CHECK_TYPE="crc32,crc64,sha256"
-BCJ="y"
-DELTA="y"
-ENCODERS="y"
-DECODERS="y"
-THREADS="y"
-SHARED="y"
-NATIVE_LANG_SUPPORT="y"
-SMALL="n"
-IFUNC="y"
-CLMUL="y"
-SANDBOX="y"
-SRC_DIR="$ABS_DIR/../"
-DEST_DIR="$SRC_DIR/../xz_build"
-PHASE="all"
-ARTIFACTS_DIR_NAME="output"
-
-
-###################
-# Parse arguments #
-###################
-
-while getopts a:b:c:d:l:m:n:s:p:f:h opt; do
-	# b option can have either value "autotools" OR "cmake"
-	case ${opt} in
-	h)
-		echo "$USAGE"
-		exit 0
-	;;
-	a)
-		AUTOGEN_FLAGS="$OPTARG"
-	;;
-	b)
-		case "$OPTARG" in
-			autotools) ;;
-			cmake) ;;
-			*) echo "Invalid build system: $OPTARG"; exit 1;;
-		esac
-		BUILD_SYSTEM="$OPTARG"
-	;;
-	c) CHECK_TYPE="$OPTARG"
-	;;
-	# d options can be a comma separated list of things to disable at
-	# configure time
-	d)
-	for disable_arg in $(echo "$OPTARG" | sed "s/,/ /g"); do
-		case "$disable_arg" in
-		encoders) ENCODERS="n" ;;
-		decoders) DECODERS="n" ;;
-		bcj) BCJ="n" ;;
-		delta) DELTA="n" ;;
-		threads) THREADS="n" ;;
-		shared) SHARED="n";;
-		nls) NATIVE_LANG_SUPPORT="n";;
-		small) SMALL="y";;
-		ifunc) IFUNC="n";;
-		clmul) CLMUL="n";;
-		sandbox) SANDBOX="n";;
-		*) echo "Invalid disable value: $disable_arg"; exit 1 ;;
-		esac
-	done
-	;;
-	l) DEST_DIR="$OPTARG"
-	;;
-	m)
-		CC="$OPTARG"
-		export CC
-	;;
-	n) ARTIFACTS_DIR_NAME="$OPTARG"
-	;;
-	s) SRC_DIR="$OPTARG"
-	;;
-	p) PHASE="$OPTARG"
-	;;
-	f)
-		CFLAGS="$OPTARG"
-		export CFLAGS
-	;;
-	esac
-done
-
-
-####################
-# Helper Functions #
-####################
-
-# These two functions essentially implement the ternary "?" operator.
-add_extra_option() {
-	# First argument is option value ("y" or "n")
-	# Second argument is option to set if "y"
-	# Third argument is option to set if "n"
-	if [ "$1" = "y" ]
-	then
-		EXTRA_OPTIONS="$EXTRA_OPTIONS $2"
-	else
-		EXTRA_OPTIONS="$EXTRA_OPTIONS $3"
-	fi
-}
-
-
-add_to_filter_list() {
-	# First argument is option value ("y" or "n")
-	# Second argument is option to set if "y"
-	if [ "$1" = "y" ]
-	then
-		FILTER_LIST="$FILTER_LIST$2"
-	fi
-}
-
-
-###############
-# Build Phase #
-###############
-
-if [ "$PHASE" = "all" ] || [ "$PHASE" = "build" ]
-then
-	# Checksum options should be specified differently based on the
-	# build system. It must be calculated here since we won't know
-	# the build system used until all args have been parsed.
-	# Autotools - comma separated
-	# CMake - semi-colon separated
-	if [ "$BUILD_SYSTEM" = "autotools" ]
-	then
-		SEP=","
-	else
-		SEP=";"
-	fi
-
-	CHECK_TYPE_TEMP=""
-	for crc in $(echo "$CHECK_TYPE" | sed "s/,/ /g"); do
-			case "$crc" in
-			# Remove "crc32" from cmake build, if specified.
-			crc32)
-				if [ "$BUILD_SYSTEM" = "cmake" ]
-				then
-					continue
-				fi
-			;;
-			crc64) ;;
-			sha256) ;;
-			*) echo "Invalid check type: $crc"; exit 1 ;;
-			esac
-
-			CHECK_TYPE_TEMP="$CHECK_TYPE_TEMP$SEP$crc"
-	done
-
-	# Remove the first character from $CHECK_TYPE_TEMP since it will
-	# always be the delimiter.
-	CHECK_TYPE="${CHECK_TYPE_TEMP:1}"
-
-	FILTER_LIST="lzma1$SEP"lzma2
-
-	# Build based on arguments
-	mkdir -p "$DEST_DIR"
-
-	# Generate configure option values
-	EXTRA_OPTIONS=""
-
-	case $BUILD_SYSTEM in
-	autotools)
-		cd "$SRC_DIR"
-
-		# Run autogen.sh script if not already run
-		if [ ! -f configure ]
-		then
-			./autogen.sh "$AUTOGEN_FLAGS"
-		fi
-
-		cd "$DEST_DIR"
-
-		add_to_filter_list "$BCJ" ",x86,powerpc,ia64,arm,armthumb,arm64,sparc,riscv"
-		add_to_filter_list "$DELTA" ",delta"
-
-		add_extra_option "$ENCODERS" "--enable-encoders=$FILTER_LIST" "--disable-encoders"
-		add_extra_option "$DECODERS" "--enable-decoders=$FILTER_LIST" "--disable-decoders"
-		add_extra_option "$THREADS" "" "--disable-threads"
-		add_extra_option "$SHARED" "" "--disable-shared"
-		add_extra_option "$NATIVE_LANG_SUPPORT" "" "--disable-nls"
-		add_extra_option "$SMALL" "--enable-small" ""
-		add_extra_option "$IFUNC" "" "--disable-ifunc"
-		add_extra_option "$CLMUL" "" "--disable-clmul-crc"
-		add_extra_option "$SANDBOX" "" "--enable-sandbox=no"
-
-		# Run configure script
-		"$SRC_DIR"/configure --enable-werror --enable-checks="$CHECK_TYPE" $EXTRA_OPTIONS --config-cache
-
-		# Build the project
-		make
-	;;
-	cmake)
-		cd "$DEST_DIR"
-
-		add_to_filter_list "$BCJ" ";x86;powerpc;ia64;arm;armthumb;arm64;sparc;riscv"
-		add_to_filter_list "$DELTA" ";delta"
-
-		add_extra_option "$THREADS" "-DENABLE_THREADS=ON" "-DENABLE_THREADS=OFF"
-
-		# Disable MicroLZMA if encoders are not configured.
-		add_extra_option "$ENCODERS" "-DENCODERS=$FILTER_LIST" "-DENCODERS= -DMICROLZMA_ENCODER=OFF"
-
-		# Disable MicroLZMA and lzip decoders if decoders are not configured.
-		add_extra_option "$DECODERS" "-DDECODERS=$FILTER_LIST" "-DDECODERS= -DMICROLZMA_DECODER=OFF -DLZIP_DECODER=OFF"
-
-		# CMake disables the shared library by default.
-		add_extra_option "$SHARED" "-DBUILD_SHARED_LIBS=ON" ""
-
-		add_extra_option "$SMALL" "-DHAVE_SMALL=ON" ""
-
-		if test -n "$CC" ; then
-			EXTRA_OPTIONS="$EXTRA_OPTIONS -DCMAKE_C_COMPILER=$CC"
-		fi
-
-		# Remove old cache file to clear previous settings.
-		rm -f "CMakeCache.txt"
-		cmake "$SRC_DIR/CMakeLists.txt" -B "$DEST_DIR" $EXTRA_OPTIONS -DADDITIONAL_CHECK_TYPES="$CHECK_TYPE" -G "Unix Makefiles"
-		cmake --build "$DEST_DIR"
-	;;
-	esac
-fi
-
-
-##############
-# Test Phase #
-##############
-
-if [ "$PHASE" = "all" ] || [ "$PHASE" = "test" ]
-then
-	case $BUILD_SYSTEM in
-	autotools)
-		cd "$DEST_DIR"
-		# If the tests fail, copy the test logs into the artifacts folder
-		if make check
-		then
-			:
-		else
-			mkdir -p "$SRC_DIR/build-aux/artifacts/$ARTIFACTS_DIR_NAME"
-			cp ./tests/*.log "$SRC_DIR/build-aux/artifacts/$ARTIFACTS_DIR_NAME"
-			exit 1
-		fi
-	;;
-	cmake)
-		cd "$DEST_DIR"
-		if make test
-		then
-			:
-		else
-			mkdir -p "$SRC_DIR/build-aux/artifacts/$ARTIFACTS_DIR_NAME"
-			cp ./Testing/Temporary/*.log "$SRC_DIR/build-aux/artifacts/$ARTIFACTS_DIR_NAME"
-			exit 1
-		fi
-	;;
-	esac
-fi

build-aux/manconv.sh

@@ -1,6 +1,5 @@
 #!/bin/sh
-# SPDX-License-Identifier: 0BSD
+#
-
 ###############################################################################
 #
 # Wrapper for GNU groff to convert man pages to a few formats
@@ -18,6 +17,9 @@
 #
 # Author: Lasse Collin
 #
+# This file has been put into the public domain.
+# You can do whatever you want with this file.
+#
 ###############################################################################
 
 FORMAT=$1
@@ -36,10 +38,10 @@ s/^\\.PD\$/.PD $PD/"
 
 case $FORMAT in
 	ascii)
-		groff -t -mandoc -Tascii -P-c | col -bx
+		groff -t -mandoc -Tascii | col -bx
 		;;
 	utf8)
-		groff -t -mandoc -Tutf8 -P-c | col -bx
+		groff -t -mandoc -Tutf8 | col -bx
 		;;
 	ps)
 		sed "$SED_PD" | groff -dpaper=$PAPER -t -mandoc \

build-aux/version.sh

@@ -1,6 +1,5 @@
 #!/bin/sh
-# SPDX-License-Identifier: 0BSD
+#
-
 #############################################################################
 #
 # Get the version string from version.h and print it out without
@@ -10,6 +9,9 @@
 #
 # Author: Lasse Collin
 #
+# This file has been put into the public domain.
+# You can do whatever you want with this file.
+#
 #############################################################################
 
 sed -n 's/LZMA_VERSION_STABILITY_ALPHA/alpha/
@@ -19,4 +21,4 @@ sed -n 's/LZMA_VERSION_STABILITY_ALPHA/alpha/
 	src/liblzma/api/lzma/version.h \
 	| tr '\n' '|' \
 	| sed 's/|/./; s/|/./; s/|//g' \
-	| tr -d '\r\n'
+	| tr -d '\n'

cmake/remove-ordinals.cmake

@@ -1,25 +0,0 @@
-# SPDX-License-Identifier: 0BSD
-
-#############################################################################
-#
-# remove-ordinals.cmake
-#
-# Removes the ordinal numbers from a DEF file that has been created by
-# GNU ld or LLVM lld option --output-def (when creating a Windows DLL).
-# This should be equivalent: sed 's/ \+@ *[0-9]\+//'
-#
-# Usage:
-#
-#     cmake -DINPUT_FILE=infile.def.in \
-#           -DOUTPUT_FILE=outfile.def \
-#           -P remove-ordinals.cmake
-#
-#############################################################################
-#
-# Author: Lasse Collin
-#
-#############################################################################
-
-file(READ "${INPUT_FILE}" STR)
-string(REGEX REPLACE " +@ *[0-9]+" "" STR "${STR}")
-file(WRITE "${OUTPUT_FILE}" "${STR}")

cmake/tuklib_common.cmake

@@ -1,50 +0,0 @@
-# SPDX-License-Identifier: 0BSD
-
-#############################################################################
-#
-# tuklib_common.cmake - common functions and macros for tuklib_*.cmake files
-#
-# Author: Lasse Collin
-#
-#############################################################################
-
-function(tuklib_add_definitions TARGET_OR_ALL DEFINITIONS)
-    # DEFINITIONS may be an empty string/list but it's fine here. There is
-    # no need to quote ${DEFINITIONS} as empty arguments are fine here.
-    if(TARGET_OR_ALL STREQUAL "ALL")
-        add_compile_definitions(${DEFINITIONS})
-    else()
-        target_compile_definitions("${TARGET_OR_ALL}" PRIVATE ${DEFINITIONS})
-    endif()
-endfunction()
-
-function(tuklib_add_definition_if TARGET_OR_ALL VAR)
-    if(${VAR})
-        tuklib_add_definitions("${TARGET_OR_ALL}" "${VAR}")
-    endif()
-endfunction()
-
-# This is an over-simplified version of AC_USE_SYSTEM_EXTENSIONS in Autoconf
-# or gl_USE_SYSTEM_EXTENSIONS in gnulib.
-macro(tuklib_use_system_extensions TARGET_OR_ALL)
-    if(NOT WIN32)
-        # FIXME? The Solaris-specific __EXTENSIONS__ should be conditional
-        #        even on Solaris. See gnulib: git log m4/extensions.m4.
-        # FIXME? gnulib and autoconf.git has lots of new stuff.
-        tuklib_add_definitions("${TARGET_OR_ALL}"
-            _GNU_SOURCE
-            __EXTENSIONS__
-            _POSIX_PTHREAD_SEMANTICS
-            _TANDEM_SOURCE
-            _ALL_SOURCE
-        )
-
-        list(APPEND CMAKE_REQUIRED_DEFINITIONS
-            -D_GNU_SOURCE
-            -D__EXTENSIONS__
-            -D_POSIX_PTHREAD_SEMANTICS
-            -D_TANDEM_SOURCE
-            -D_ALL_SOURCE
-        )
-    endif()
-endmacro()

cmake/tuklib_cpucores.cmake

@@ -1,181 +0,0 @@
-# SPDX-License-Identifier: 0BSD
-
-#############################################################################
-#
-# tuklib_cpucores.cmake - see tuklib_cpucores.m4 for description and comments
-#
-# Author: Lasse Collin
-#
-#############################################################################
-
-include("${CMAKE_CURRENT_LIST_DIR}/tuklib_common.cmake")
-include(CheckCSourceCompiles)
-include(CheckIncludeFile)
-
-function(tuklib_cpucores_internal_check)
-    if(WIN32 OR CYGWIN)
-        # Nothing to do, the tuklib_cpucores.c handles it.
-        set(TUKLIB_CPUCORES_DEFINITIONS "" CACHE INTERNAL "")
-        return()
-    endif()
-
-    # glibc-based systems (GNU/Linux and GNU/kFreeBSD) have
-    # sched_getaffinity(). The CPU_COUNT() macro was added in glibc 2.9.
-    # glibc 2.9 is old enough that if someone uses the code on older glibc,
-    # the fallback to sysconf() should be good enough.
-    #
-    # NOTE: This required that _GNU_SOURCE is defined. We assume that whatever
-    #       feature test macros the caller wants to use are already set in
-    #       CMAKE_REQUIRED_DEFINES and in the target defines.
-    check_c_source_compiles("
-            #include <sched.h>
-            int main(void)
-            {
-                cpu_set_t cpu_mask;
-                sched_getaffinity(0, sizeof(cpu_mask), &cpu_mask);
-                return CPU_COUNT(&cpu_mask);
-            }
-        "
-        TUKLIB_CPUCORES_SCHED_GETAFFINITY)
-    if(TUKLIB_CPUCORES_SCHED_GETAFFINITY)
-        set(TUKLIB_CPUCORES_DEFINITIONS
-            "TUKLIB_CPUCORES_SCHED_GETAFFINITY"
-            CACHE INTERNAL "")
-        return()
-    endif()
-
-    # FreeBSD has both cpuset and sysctl. Look for cpuset first because
-    # it's a better approach.
-    #
-    # This test would match on GNU/kFreeBSD too but it would require
-    # -lfreebsd-glue when linking and thus in the current form this would
-    # fail on GNU/kFreeBSD. The above test for sched_getaffinity() matches
-    # on GNU/kFreeBSD so the test below should never run on that OS.
-    check_c_source_compiles("
-            #include <sys/param.h>
-            #include <sys/cpuset.h>
-            int main(void)
-            {
-                cpuset_t set;
-                cpuset_getaffinity(CPU_LEVEL_WHICH, CPU_WHICH_PID, -1,
-                                   sizeof(set), &set);
-                return 0;
-            }
-        "
-        TUKLIB_CPUCORES_CPUSET)
-    if(TUKLIB_CPUCORES_CPUSET)
-        set(TUKLIB_CPUCORES_DEFINITIONS "HAVE_PARAM_H;TUKLIB_CPUCORES_CPUSET"
-            CACHE INTERNAL "")
-        return()
-    endif()
-
-    # On OS/2, both sysconf() and sysctl() pass the tests in this file,
-    # but only sysctl() works. On QNX it's the opposite: only sysconf() works
-    # (although it assumes that _POSIX_SOURCE, _XOPEN_SOURCE, and
-    # _POSIX_C_SOURCE are undefined or alternatively _QNX_SOURCE is defined).
-    #
-    # We test sysctl() first and intentionally break the sysctl() test on QNX
-    # so that sysctl() is never used on QNX.
-    check_include_file(sys/param.h HAVE_SYS_PARAM_H)
-    if(HAVE_SYS_PARAM_H)
-        list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_SYS_PARAM_H)
-    endif()
-    check_c_source_compiles("
-            #ifdef __QNX__
-            compile error
-            #endif
-            #ifdef HAVE_SYS_PARAM_H
-            #   include <sys/param.h>
-            #endif
-            #include <sys/sysctl.h>
-            int main(void)
-            {
-            #ifdef HW_NCPUONLINE
-                /* This is preferred on OpenBSD, see tuklib_cpucores.c. */
-                int name[2] = { CTL_HW, HW_NCPUONLINE };
-            #else
-                int name[2] = { CTL_HW, HW_NCPU };
-            #endif
-                int cpus;
-                size_t cpus_size = sizeof(cpus);
-                sysctl(name, 2, &cpus, &cpus_size, NULL, 0);
-                return 0;
-            }
-        "
-        TUKLIB_CPUCORES_SYSCTL)
-    if(TUKLIB_CPUCORES_SYSCTL)
-        if(HAVE_SYS_PARAM_H)
-            set(TUKLIB_CPUCORES_DEFINITIONS
-                "HAVE_PARAM_H;TUKLIB_CPUCORES_SYSCTL"
-                CACHE INTERNAL "")
-        else()
-            set(TUKLIB_CPUCORES_DEFINITIONS
-                "TUKLIB_CPUCORES_SYSCTL"
-                CACHE INTERNAL "")
-        endif()
-        return()
-    endif()
-
-    # Many platforms support sysconf().
-    check_c_source_compiles("
-            #include <unistd.h>
-            int main(void)
-            {
-                long i;
-            #ifdef _SC_NPROCESSORS_ONLN
-                /* Many systems using sysconf() */
-                i = sysconf(_SC_NPROCESSORS_ONLN);
-            #else
-                /* IRIX */
-                i = sysconf(_SC_NPROC_ONLN);
-            #endif
-                return 0;
-            }
-        "
-        TUKLIB_CPUCORES_SYSCONF)
-    if(TUKLIB_CPUCORES_SYSCONF)
-        set(TUKLIB_CPUCORES_DEFINITIONS "TUKLIB_CPUCORES_SYSCONF"
-            CACHE INTERNAL "")
-        return()
-    endif()
-
-    # HP-UX
-    check_c_source_compiles("
-            #include <sys/param.h>
-            #include <sys/pstat.h>
-            int main(void)
-            {
-                struct pst_dynamic pst;
-                pstat_getdynamic(&pst, sizeof(pst), 1, 0);
-                (void)pst.psd_proc_cnt;
-                return 0;
-            }
-        "
-        TUKLIB_CPUCORES_PSTAT_GETDYNAMIC)
-    if(TUKLIB_CPUCORES_PSTAT_GETDYNAMIC)
-        set(TUKLIB_CPUCORES_DEFINITIONS "TUKLIB_CPUCORES_PSTAT_GETDYNAMIC"
-            CACHE INTERNAL "")
-        return()
-    endif()
-endfunction()
-
-function(tuklib_cpucores TARGET_OR_ALL)
-    if(NOT DEFINED TUKLIB_CPUCORES_FOUND)
-        message(STATUS
-                "Checking how to detect the number of available CPU cores")
-        tuklib_cpucores_internal_check()
-
-        if(DEFINED TUKLIB_CPUCORES_DEFINITIONS)
-            set(TUKLIB_CPUCORES_FOUND 1 CACHE INTERNAL "")
-        else()
-            set(TUKLIB_CPUCORES_FOUND 0 CACHE INTERNAL "")
-            message(WARNING
-                    "No method to detect the number of CPU cores was found")
-        endif()
-    endif()
-
-    if(TUKLIB_CPUCORES_FOUND)
-        tuklib_add_definitions("${TARGET_OR_ALL}"
-                               "${TUKLIB_CPUCORES_DEFINITIONS}")
-    endif()
-endfunction()

cmake/tuklib_integer.cmake

@@ -1,141 +0,0 @@
-# SPDX-License-Identifier: 0BSD
-
-#############################################################################
-#
-# tuklib_integer.cmake - see tuklib_integer.m4 for description and comments
-#
-# Author: Lasse Collin
-#
-#############################################################################
-
-include("${CMAKE_CURRENT_LIST_DIR}/tuklib_common.cmake")
-include(TestBigEndian)
-include(CheckCSourceCompiles)
-include(CheckIncludeFile)
-include(CheckSymbolExists)
-
-function(tuklib_integer TARGET_OR_ALL)
-    # Check for endianness. Unlike the Autoconf's AC_C_BIGENDIAN, this doesn't
-    # support Apple universal binaries. The CMake module will leave the
-    # variable unset so we can catch that situation here instead of continuing
-    # as if we were little endian.
-    test_big_endian(WORDS_BIGENDIAN)
-    if(NOT DEFINED WORDS_BIGENDIAN)
-        message(FATAL_ERROR "Cannot determine endianness")
-    endif()
-    tuklib_add_definition_if("${TARGET_OR_ALL}" WORDS_BIGENDIAN)
-
-    # Look for a byteswapping method.
-    check_c_source_compiles("
-            int main(void)
-            {
-                __builtin_bswap16(1);
-                __builtin_bswap32(1);
-                __builtin_bswap64(1);
-                return 0;
-            }
-        "
-        HAVE___BUILTIN_BSWAPXX)
-    if(HAVE___BUILTIN_BSWAPXX)
-        tuklib_add_definitions("${TARGET_OR_ALL}" HAVE___BUILTIN_BSWAPXX)
-    else()
-        check_include_file(byteswap.h HAVE_BYTESWAP_H)
-        if(HAVE_BYTESWAP_H)
-            tuklib_add_definitions("${TARGET_OR_ALL}" HAVE_BYTESWAP_H)
-            check_symbol_exists(bswap_16 byteswap.h HAVE_BSWAP_16)
-            tuklib_add_definition_if("${TARGET_OR_ALL}" HAVE_BSWAP_16)
-            check_symbol_exists(bswap_32 byteswap.h HAVE_BSWAP_32)
-            tuklib_add_definition_if("${TARGET_OR_ALL}" HAVE_BSWAP_32)
-            check_symbol_exists(bswap_64 byteswap.h HAVE_BSWAP_64)
-            tuklib_add_definition_if("${TARGET_OR_ALL}" HAVE_BSWAP_64)
-        else()
-            check_include_file(sys/endian.h HAVE_SYS_ENDIAN_H)
-            if(HAVE_SYS_ENDIAN_H)
-                tuklib_add_definitions("${TARGET_OR_ALL}" HAVE_SYS_ENDIAN_H)
-            else()
-                check_include_file(sys/byteorder.h HAVE_SYS_BYTEORDER_H)
-                tuklib_add_definition_if("${TARGET_OR_ALL}"
-                                         HAVE_SYS_BYTEORDER_H)
-            endif()
-        endif()
-    endif()
-
-    # Guess that unaligned access is fast on these archs:
-    #   - 32/64-bit x86 / x86-64
-    #   - 32/64-bit big endian PowerPC
-    #   - 64-bit little endian PowerPC
-    #   - Some 32-bit ARM
-    #   - Some 64-bit ARM64 (AArch64)
-    #   - Some 32/64-bit RISC-V
-    #
-    # CMake doesn't provide a standardized/normalized list of processor arch
-    # names. For example, x86-64 may be "x86_64" (Linux), "AMD64" (Windows),
-    # or even "EM64T" (64-bit WinXP).
-    set(FAST_UNALIGNED_GUESS OFF)
-    string(TOLOWER "${CMAKE_SYSTEM_PROCESSOR}" PROCESSOR)
-
-    # There is no ^ in the first regex branch to allow "i" at the beginning
-    # so it can match "i386" to "i786", and "x86_64".
-    if(PROCESSOR MATCHES "[x34567]86|^x64|^amd64|^em64t")
-        set(FAST_UNALIGNED_GUESS ON)
-
-    elseif(PROCESSOR MATCHES "^powerpc|^ppc")
-        if(WORDS_BIGENDIAN OR PROCESSOR MATCHES "64")
-            set(FAST_UNALIGNED_GUESS ON)
-        endif()
-
-    elseif(PROCESSOR MATCHES "^arm|^aarch64|^riscv")
-        # On 32-bit and 64-bit ARM, GCC and Clang
-        # #define __ARM_FEATURE_UNALIGNED if
-        # unaligned access is supported.
-        #
-        # Exception: GCC at least up to 13.2.0
-        # defines it even when using -mstrict-align
-        # so in that case this autodetection goes wrong.
-        # Most of the time -mstrict-align isn't used so it
-        # shouldn't be a common problem in practice. See:
-        # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=111555
-        #
-        # RISC-V C API Specification says that if
-        # __riscv_misaligned_fast is defined then
-        # unaligned access is known to be fast.
-        #
-        # MSVC is handled as a special case: We assume that
-        # 32/64-bit ARM supports fast unaligned access.
-        # If MSVC gets RISC-V support then this will assume
-        # fast unaligned access on RISC-V too.
-        check_c_source_compiles("
-                #if !defined(__ARM_FEATURE_UNALIGNED) \
-                        && !defined(__riscv_misaligned_fast) \
-                        && !defined(_MSC_VER)
-                compile error
-                #endif
-                int main(void) { return 0; }
-            "
-            TUKLIB_FAST_UNALIGNED_DEFINED_BY_PREPROCESSOR)
-        if(TUKLIB_FAST_UNALIGNED_DEFINED_BY_PREPROCESSOR)
-            set(FAST_UNALIGNED_GUESS ON)
-        endif()
-    endif()
-
-    option(TUKLIB_FAST_UNALIGNED_ACCESS
-           "Enable if the system supports *fast* unaligned memory access \
-with 16-bit, 32-bit, and 64-bit integers."
-           "${FAST_UNALIGNED_GUESS}")
-    tuklib_add_definition_if("${TARGET_OR_ALL}" TUKLIB_FAST_UNALIGNED_ACCESS)
-
-    # Unsafe type punning:
-    option(TUKLIB_USE_UNSAFE_TYPE_PUNNING
-           "This introduces strict aliasing violations and \
-may result in broken code. However, this might improve performance \
-in some cases, especially with old compilers \
-(e.g. GCC 3 and early 4.x on x86, GCC < 6 on ARMv6 and ARMv7)."
-           OFF)
-    tuklib_add_definition_if("${TARGET_OR_ALL}" TUKLIB_USE_UNSAFE_TYPE_PUNNING)
-
-    # Check for GCC/Clang __builtin_assume_aligned().
-    check_c_source_compiles(
-        "int main(void) { __builtin_assume_aligned(\"\", 1); return 0; }"
-        HAVE___BUILTIN_ASSUME_ALIGNED)
-    tuklib_add_definition_if("${TARGET_OR_ALL}" HAVE___BUILTIN_ASSUME_ALIGNED)
-endfunction()

cmake/tuklib_large_file_support.cmake

@@ -1,53 +0,0 @@
-# SPDX-License-Identifier: 0BSD
-
-#############################################################################
-#
-# tuklib_large_file_support.cmake
-#
-# If off_t is less than 64 bits by default and -D_FILE_OFFSET_BITS=64
-# makes off_t become 64-bit, the CMake option LARGE_FILE_SUPPORT is
-# provided (ON by default) and -D_FILE_OFFSET_BITS=64 is added to
-# the compile definitions if LARGE_FILE_SUPPORT is ON.
-#
-# Author: Lasse Collin
-#
-#############################################################################
-
-include("${CMAKE_CURRENT_LIST_DIR}/tuklib_common.cmake")
-include(CheckCSourceCompiles)
-
-function(tuklib_large_file_support TARGET_OR_ALL)
-    # MSVC must be handled specially in the C code.
-    if(MSVC)
-        return()
-    endif()
-
-    set(TUKLIB_LARGE_FILE_SUPPORT_TEST
-            "#include <sys/types.h>
-            int foo[sizeof(off_t) >= 8 ? 1 : -1];
-            int main(void) { return 0; }")
-
-    check_c_source_compiles("${TUKLIB_LARGE_FILE_SUPPORT_TEST}"
-                            TUKLIB_LARGE_FILE_SUPPORT_BY_DEFAULT)
-
-    if(NOT TUKLIB_LARGE_FILE_SUPPORT_BY_DEFAULT)
-        cmake_push_check_state()
-        # This needs -D.
-        list(APPEND CMAKE_REQUIRED_DEFINITIONS "-D_FILE_OFFSET_BITS=64")
-        check_c_source_compiles("${TUKLIB_LARGE_FILE_SUPPORT_TEST}"
-                                TUKLIB_LARGE_FILE_SUPPORT_WITH_FOB64)
-        cmake_pop_check_state()
-    endif()
-
-    if(TUKLIB_LARGE_FILE_SUPPORT_WITH_FOB64)
-        # Show the option only when _FILE_OFFSET_BITS=64 affects sizeof(off_t).
-        option(LARGE_FILE_SUPPORT
-               "Use -D_FILE_OFFSET_BITS=64 to support files larger than 2 GiB."
-               ON)
-
-        if(LARGE_FILE_SUPPORT)
-            # This must not use -D.
-            tuklib_add_definitions("${TARGET_OR_ALL}" "_FILE_OFFSET_BITS=64")
-        endif()
-    endif()
-endfunction()

cmake/tuklib_mbstr.cmake

@@ -1,21 +0,0 @@
-# SPDX-License-Identifier: 0BSD
-
-#############################################################################
-#
-# tuklib_mbstr.cmake - see tuklib_mbstr.m4 for description and comments
-#
-# Author: Lasse Collin
-#
-#############################################################################
-
-include("${CMAKE_CURRENT_LIST_DIR}/tuklib_common.cmake")
-include(CheckSymbolExists)
-
-function(tuklib_mbstr TARGET_OR_ALL)
-    check_symbol_exists(mbrtowc wchar.h HAVE_MBRTOWC)
-    tuklib_add_definition_if("${TARGET_OR_ALL}" HAVE_MBRTOWC)
-
-    # NOTE: wcwidth() requires _GNU_SOURCE or _XOPEN_SOURCE on GNU/Linux.
-    check_symbol_exists(wcwidth wchar.h HAVE_WCWIDTH)
-    tuklib_add_definition_if("${TARGET_OR_ALL}" HAVE_WCWIDTH)
-endfunction()

cmake/tuklib_physmem.cmake

@@ -1,151 +0,0 @@
-# SPDX-License-Identifier: 0BSD
-
-#############################################################################
-#
-# tuklib_physmem.cmake - see tuklib_physmem.m4 for description and comments
-#
-# NOTE: Compared tuklib_physmem.m4, this lacks support for Tru64, IRIX, and
-# Linux sysinfo() (usually sysconf() is used on GNU/Linux).
-#
-# Author: Lasse Collin
-#
-#############################################################################
-
-include("${CMAKE_CURRENT_LIST_DIR}/tuklib_common.cmake")
-include(CheckCSourceCompiles)
-include(CheckIncludeFile)
-
-function(tuklib_physmem_internal_check)
-    # Shortcut on Windows:
-    if(WIN32 OR CYGWIN)
-        # Nothing to do, the tuklib_physmem.c handles it.
-        set(TUKLIB_PHYSMEM_DEFINITIONS "" CACHE INTERNAL "")
-        return()
-    endif()
-
-    # Full check for special cases:
-    check_c_source_compiles("
-            #if defined(_WIN32) || defined(__CYGWIN__) || defined(__OS2__) \
-                || defined(__DJGPP__) || defined(__VMS) \
-                || defined(AMIGA) || defined(__AROS__) || defined(__QNX__)
-            int main(void) { return 0; }
-            #else
-            compile error
-            #endif
-        "
-        TUKLIB_PHYSMEM_SPECIAL)
-    if(TUKLIB_PHYSMEM_SPECIAL)
-        # Nothing to do, the tuklib_physmem.c handles it.
-        set(TUKLIB_PHYSMEM_DEFINITIONS "" CACHE INTERNAL "")
-        return()
-    endif()
-
-    # Look for AIX-specific solution before sysconf(), because the test
-    # for sysconf() will pass on AIX but won't actually work
-    # (sysconf(_SC_PHYS_PAGES) compiles but always returns -1 on AIX).
-    check_c_source_compiles("
-            #include <sys/systemcfg.h>
-            int main(void)
-            {
-                (void)_system_configuration.physmem;
-                return 0;
-            }
-        "
-        TUKLIB_PHYSMEM_AIX)
-    if(TUKLIB_PHYSMEM_AIX)
-        set(TUKLIB_PHYSMEM_DEFINITIONS "TUKLIB_PHYSMEM_AIX" CACHE INTERNAL "")
-        return()
-    endif()
-
-    # sysconf()
-    check_c_source_compiles("
-            #include <unistd.h>
-            int main(void)
-            {
-                long i;
-                i = sysconf(_SC_PAGESIZE);
-                i = sysconf(_SC_PHYS_PAGES);
-                return 0;
-            }
-        "
-        TUKLIB_PHYSMEM_SYSCONF)
-    if(TUKLIB_PHYSMEM_SYSCONF)
-        set(TUKLIB_PHYSMEM_DEFINITIONS "TUKLIB_PHYSMEM_SYSCONF"
-            CACHE INTERNAL "")
-        return()
-    endif()
-
-    # sysctl()
-    check_include_file(sys/param.h HAVE_SYS_PARAM_H)
-    if(HAVE_SYS_PARAM_H)
-        list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_SYS_PARAM_H)
-    endif()
-
-    check_c_source_compiles("
-            #ifdef HAVE_SYS_PARAM_H
-            #   include <sys/param.h>
-            #endif
-            #include <sys/sysctl.h>
-            int main(void)
-            {
-                int name[2] = { CTL_HW, HW_PHYSMEM };
-                unsigned long mem;
-                size_t mem_ptr_size = sizeof(mem);
-                sysctl(name, 2, &mem, &mem_ptr_size, NULL, 0);
-                return 0;
-            }
-        "
-        TUKLIB_PHYSMEM_SYSCTL)
-    if(TUKLIB_PHYSMEM_SYSCTL)
-        if(HAVE_SYS_PARAM_H)
-            set(TUKLIB_PHYSMEM_DEFINITIONS
-                "HAVE_PARAM_H;TUKLIB_PHYSMEM_SYSCTL"
-                CACHE INTERNAL "")
-        else()
-            set(TUKLIB_PHYSMEM_DEFINITIONS
-                "TUKLIB_PHYSMEM_SYSCTL"
-                CACHE INTERNAL "")
-        endif()
-        return()
-    endif()
-
-    # HP-UX
-    check_c_source_compiles("
-            #include <sys/param.h>
-            #include <sys/pstat.h>
-            int main(void)
-            {
-                struct pst_static pst;
-                pstat_getstatic(&pst, sizeof(pst), 1, 0);
-                (void)pst.physical_memory;
-                (void)pst.page_size;
-                return 0;
-            }
-        "
-        TUKLIB_PHYSMEM_PSTAT_GETSTATIC)
-    if(TUKLIB_PHYSMEM_PSTAT_GETSTATIC)
-        set(TUKLIB_PHYSMEM_DEFINITIONS "TUKLIB_PHYSMEM_PSTAT_GETSTATIC"
-            CACHE INTERNAL "")
-        return()
-    endif()
-endfunction()
-
-function(tuklib_physmem TARGET_OR_ALL)
-    if(NOT DEFINED TUKLIB_PHYSMEM_FOUND)
-        message(STATUS "Checking how to detect the amount of physical memory")
-        tuklib_physmem_internal_check()
-
-        if(DEFINED TUKLIB_PHYSMEM_DEFINITIONS)
-            set(TUKLIB_PHYSMEM_FOUND 1 CACHE INTERNAL "")
-        else()
-            set(TUKLIB_PHYSMEM_FOUND 0 CACHE INTERNAL "")
-            message(WARNING
-                "No method to detect the amount of physical memory was found")
-        endif()
-    endif()
-
-    if(TUKLIB_PHYSMEM_FOUND)
-        tuklib_add_definitions("${TARGET_OR_ALL}"
-                               "${TUKLIB_PHYSMEM_DEFINITIONS}")
-    endif()
-endfunction()

cmake/tuklib_progname.cmake

@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: 0BSD
-
-#############################################################################
-#
-# tuklib_progname.cmake - see tuklib_progname.m4 for description and comments
-#
-# Author: Lasse Collin
-#
-#############################################################################
-
-include("${CMAKE_CURRENT_LIST_DIR}/tuklib_common.cmake")
-include(CheckSymbolExists)
-
-function(tuklib_progname TARGET_OR_ALL)
-    # NOTE: This glibc extension requires _GNU_SOURCE.
-    check_symbol_exists(program_invocation_name errno.h
-                        HAVE_PROGRAM_INVOCATION_NAME)
-    tuklib_add_definition_if("${TARGET_OR_ALL}" HAVE_PROGRAM_INVOCATION_NAME)
-endfunction()

debug/Makefile.am

@@ -1,5 +1,9 @@
-## SPDX-License-Identifier: 0BSD
+##
 ## Author: Lasse Collin
+##
+## This file has been put into the public domain.
+## You can do whatever you want with this file.
+##
 
 EXTRA_DIST = \
 	translation.bash

debug/crc32.c

@@ -1,5 +1,3 @@
-// SPDX-License-Identifier: 0BSD
-
 ///////////////////////////////////////////////////////////////////////////////
 //
 /// \file       crc32.c
@@ -7,6 +5,9 @@
 //
 //  Author:     Lasse Collin
 //
+//  This file has been put into the public domain.
+//  You can do whatever you want with this file.
+//
 ///////////////////////////////////////////////////////////////////////////////
 
 #include "sysdefs.h"

debug/full_flush.c

@@ -1,5 +1,3 @@
-// SPDX-License-Identifier: 0BSD
-
 ///////////////////////////////////////////////////////////////////////////////
 //
 /// \file       full_flush.c
@@ -7,14 +5,15 @@
 //
 //  Author:     Lasse Collin
 //
+//  This file has been put into the public domain.
+//  You can do whatever you want with this file.
+//
 ///////////////////////////////////////////////////////////////////////////////
 
 #include "sysdefs.h"
 #include "lzma.h"
 #include <stdio.h>
 
-#define CHUNK 64
-
 
 static lzma_stream strm = LZMA_STREAM_INIT;
 static FILE *file_in;
@@ -23,6 +22,7 @@ static FILE *file_in;
 static void
 encode(size_t size, lzma_action action)
 {
+	static const size_t CHUNK = 64;
 	uint8_t in[CHUNK];
 	uint8_t out[CHUNK];
 	lzma_ret ret;

debug/hex2bin.c

@@ -1,5 +1,3 @@
-// SPDX-License-Identifier: 0BSD
-
 ///////////////////////////////////////////////////////////////////////////////
 //
 /// \file       hex2bin.c
@@ -7,6 +5,9 @@
 //
 //  Author:     Lasse Collin
 //
+//  This file has been put into the public domain.
+//  You can do whatever you want with this file.
+//
 ///////////////////////////////////////////////////////////////////////////////
 
 #include "sysdefs.h"

debug/known_sizes.c

@@ -1,5 +1,3 @@
-// SPDX-License-Identifier: 0BSD
-
 ///////////////////////////////////////////////////////////////////////////////
 //
 /// \file       known_sizes.c
@@ -11,6 +9,9 @@
 //
 //  Author:     Lasse Collin
 //
+//  This file has been put into the public domain.
+//  You can do whatever you want with this file.
+//
 ///////////////////////////////////////////////////////////////////////////////
 
 #include "sysdefs.h"

debug/memusage.c

@@ -1,5 +1,3 @@
-// SPDX-License-Identifier: 0BSD
-
 ///////////////////////////////////////////////////////////////////////////////
 //
 /// \file       memusage.c
@@ -7,6 +5,9 @@
 //
 //  Author:     Lasse Collin
 //
+//  This file has been put into the public domain.
+//  You can do whatever you want with this file.
+//
 ///////////////////////////////////////////////////////////////////////////////
 
 #include "sysdefs.h"

debug/repeat.c

@@ -1,5 +1,3 @@
-// SPDX-License-Identifier: 0BSD
-
 ///////////////////////////////////////////////////////////////////////////////
 //
 /// \file       repeat.c
@@ -11,6 +9,9 @@
 //
 //  Author:     Lasse Collin
 //
+//  This file has been put into the public domain.
+//  You can do whatever you want with this file.
+//
 ///////////////////////////////////////////////////////////////////////////////
 
 #include "sysdefs.h"

debug/sync_flush.c

@@ -1,5 +1,3 @@
-// SPDX-License-Identifier: 0BSD
-
 ///////////////////////////////////////////////////////////////////////////////
 //
 /// \file       sync_flush.c
@@ -7,14 +5,15 @@
 //
 //  Author:     Lasse Collin
 //
+//  This file has been put into the public domain.
+//  You can do whatever you want with this file.
+//
 ///////////////////////////////////////////////////////////////////////////////
 
 #include "sysdefs.h"
 #include "lzma.h"
 #include <stdio.h>
 
-#define CHUNK 64
-
 
 static lzma_stream strm = LZMA_STREAM_INIT;
 static FILE *file_in;
@@ -23,6 +22,7 @@ static FILE *file_in;
 static void
 encode(size_t size, lzma_action action)
 {
+	static const size_t CHUNK = 64;
 	uint8_t in[CHUNK];
 	uint8_t out[CHUNK];
 	lzma_ret ret;

debug/translation.bash

@@ -1,5 +1,4 @@
 #!/bin/bash
-# SPDX-License-Identifier: 0BSD
 
 ###############################################################################
 #
@@ -21,6 +20,9 @@
 #
 # Author: Lasse Collin
 #
+# This file has been put into the public domain.
+# You can do whatever you want with this file.
+#
 ###############################################################################
 
 set -e

doc/examples/00_README.txt

@@ -25,7 +25,3 @@ List of examples
                                         a custom filter chain
                                         (x86 BCJ + LZMA2)
 
-    04_compress_easy_mt.c               Multi-threaded multi-call
-                                        compression using a compression
-                                        preset
-

doc/examples/01_compress_easy.c

@@ -1,5 +1,3 @@
-// SPDX-License-Identifier: 0BSD
-
 ///////////////////////////////////////////////////////////////////////////////
 //
 /// \file       01_compress_easy.c
@@ -11,6 +9,9 @@
 //
 //  Author:     Lasse Collin
 //
+//  This file has been put into the public domain.
+//  You can do whatever you want with this file.
+//
 ///////////////////////////////////////////////////////////////////////////////
 
 #include <stdbool.h>
@@ -26,7 +27,7 @@ show_usage_and_exit(const char *argv0)
 {
 	fprintf(stderr, "Usage: %s PRESET < INFILE > OUTFILE\n"
 			"PRESET is a number 0-9 and can optionally be "
-			"followed by 'e' to indicate extreme preset\n",
+			"followed by `e' to indicate extreme preset\n",
 			argv0);
 	exit(EXIT_FAILURE);
 }
@@ -172,7 +173,7 @@ compress(lzma_stream *strm, FILE *infile, FILE *outfile)
 		lzma_ret ret = lzma_code(strm, action);
 
 		// If the output buffer is full or if the compression finished
-		// successfully, write the data from the output buffer to
+		// successfully, write the data from the output bufffer to
 		// the output file.
 		if (strm->avail_out == 0 || ret == LZMA_STREAM_END) {
 			// When lzma_code() has returned LZMA_STREAM_END,

doc/examples/02_decompress.c

@@ -1,5 +1,3 @@
-// SPDX-License-Identifier: 0BSD
-
 ///////////////////////////////////////////////////////////////////////////////
 //
 /// \file       02_decompress.c
@@ -11,6 +9,9 @@
 //
 //  Author:     Lasse Collin
 //
+//  This file has been put into the public domain.
+//  You can do whatever you want with this file.
+//
 ///////////////////////////////////////////////////////////////////////////////
 
 #include <stdbool.h>
@@ -137,7 +138,7 @@ decompress(lzma_stream *strm, const char *inname, FILE *infile, FILE *outfile)
 			// Once the end of the input file has been reached,
 			// we need to tell lzma_code() that no more input
 			// will be coming. As said before, this isn't required
-			// if the LZMA_CONCATENATED flag isn't used when
+			// if the LZMA_CONATENATED flag isn't used when
 			// initializing the decoder.
 			if (feof(infile))
 				action = LZMA_FINISH;

doc/examples/03_compress_custom.c

@@ -1,5 +1,3 @@
-// SPDX-License-Identifier: 0BSD
-
 ///////////////////////////////////////////////////////////////////////////////
 //
 /// \file       03_compress_custom.c
@@ -11,6 +9,9 @@
 //
 //  Author:     Lasse Collin
 //
+//  This file has been put into the public domain.
+//  You can do whatever you want with this file.
+//
 ///////////////////////////////////////////////////////////////////////////////
 
 #include <stdbool.h>
@@ -27,8 +28,8 @@ init_encoder(lzma_stream *strm)
 	// Use the default preset (6) for LZMA2.
 	//
 	// The lzma_options_lzma structure and the lzma_lzma_preset() function
-	// are declared in lzma/lzma12.h (src/liblzma/api/lzma/lzma12.h in the
+	// are declared in lzma/lzma.h (src/liblzma/api/lzma/lzma.h in the
-	// source package or e.g. /usr/include/lzma/lzma12.h depending on
+	// source package or e.g. /usr/include/lzma/lzma.h depending on
 	// the install prefix).
 	lzma_options_lzma opt_lzma2;
 	if (lzma_lzma_preset(&opt_lzma2, LZMA_PRESET_DEFAULT)) {
@@ -47,7 +48,7 @@ init_encoder(lzma_stream *strm)
 	// Now we could customize the LZMA2 options if we wanted. For example,
 	// we could set the the dictionary size (opt_lzma2.dict_size) to
 	// something else than the default (8 MiB) of the default preset.
-	// See lzma/lzma12.h for details of all LZMA2 options.
+	// See lzma/lzma.h for details of all LZMA2 options.
 	//
 	// The x86 BCJ filter will try to modify the x86 instruction stream so
 	// that LZMA2 can compress it better. The x86 BCJ filter doesn't need

doc/examples/04_compress_easy_mt.c

@@ -1,205 +0,0 @@
-// SPDX-License-Identifier: 0BSD
-
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file       04_compress_easy_mt.c
-/// \brief      Compress in multi-call mode using LZMA2 in multi-threaded mode
-///
-/// Usage:      ./04_compress_easy_mt < INFILE > OUTFILE
-///
-/// Example:    ./04_compress_easy_mt < foo > foo.xz
-//
-//  Author:     Lasse Collin
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#include <stdbool.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <lzma.h>
-
-
-static bool
-init_encoder(lzma_stream *strm)
-{
-	// The threaded encoder takes the options as pointer to
-	// a lzma_mt structure.
-	lzma_mt mt = {
-		// No flags are needed.
-		.flags = 0,
-
-		// Let liblzma determine a sane block size.
-		.block_size = 0,
-
-		// Use no timeout for lzma_code() calls by setting timeout
-		// to zero. That is, sometimes lzma_code() might block for
-		// a long time (from several seconds to even minutes).
-		// If this is not OK, for example due to progress indicator
-		// needing updates, specify a timeout in milliseconds here.
-		// See the documentation of lzma_mt in lzma/container.h for
-		// information how to choose a reasonable timeout.
-		.timeout = 0,
-
-		// Use the default preset (6) for LZMA2.
-		// To use a preset, filters must be set to NULL.
-		.preset = LZMA_PRESET_DEFAULT,
-		.filters = NULL,
-
-		// Use CRC64 for integrity checking. See also
-		// 01_compress_easy.c about choosing the integrity check.
-		.check = LZMA_CHECK_CRC64,
-	};
-
-	// Detect how many threads the CPU supports.
-	mt.threads = lzma_cputhreads();
-
-	// If the number of CPU cores/threads cannot be detected,
-	// use one thread. Note that this isn't the same as the normal
-	// single-threaded mode as this will still split the data into
-	// blocks and use more RAM than the normal single-threaded mode.
-	// You may want to consider using lzma_easy_encoder() or
-	// lzma_stream_encoder() instead of lzma_stream_encoder_mt() if
-	// lzma_cputhreads() returns 0 or 1.
-	if (mt.threads == 0)
-		mt.threads = 1;
-
-	// If the number of CPU cores/threads exceeds threads_max,
-	// limit the number of threads to keep memory usage lower.
-	// The number 8 is arbitrarily chosen and may be too low or
-	// high depending on the compression preset and the computer
-	// being used.
-	//
-	// FIXME: A better way could be to check the amount of RAM
-	// (or available RAM) and use lzma_stream_encoder_mt_memusage()
-	// to determine if the number of threads should be reduced.
-	const uint32_t threads_max = 8;
-	if (mt.threads > threads_max)
-		mt.threads = threads_max;
-
-	// Initialize the threaded encoder.
-	lzma_ret ret = lzma_stream_encoder_mt(strm, &mt);
-
-	if (ret == LZMA_OK)
-		return true;
-
-	const char *msg;
-	switch (ret) {
-	case LZMA_MEM_ERROR:
-		msg = "Memory allocation failed";
-		break;
-
-	case LZMA_OPTIONS_ERROR:
-		// We are no longer using a plain preset so this error
-		// message has been edited accordingly compared to
-		// 01_compress_easy.c.
-		msg = "Specified filter chain is not supported";
-		break;
-
-	case LZMA_UNSUPPORTED_CHECK:
-		msg = "Specified integrity check is not supported";
-		break;
-
-	default:
-		msg = "Unknown error, possibly a bug";
-		break;
-	}
-
-	fprintf(stderr, "Error initializing the encoder: %s (error code %u)\n",
-			msg, ret);
-	return false;
-}
-
-
-// This function is identical to the one in 01_compress_easy.c.
-static bool
-compress(lzma_stream *strm, FILE *infile, FILE *outfile)
-{
-	lzma_action action = LZMA_RUN;
-
-	uint8_t inbuf[BUFSIZ];
-	uint8_t outbuf[BUFSIZ];
-
-	strm->next_in = NULL;
-	strm->avail_in = 0;
-	strm->next_out = outbuf;
-	strm->avail_out = sizeof(outbuf);
-
-	while (true) {
-		if (strm->avail_in == 0 && !feof(infile)) {
-			strm->next_in = inbuf;
-			strm->avail_in = fread(inbuf, 1, sizeof(inbuf),
-					infile);
-
-			if (ferror(infile)) {
-				fprintf(stderr, "Read error: %s\n",
-						strerror(errno));
-				return false;
-			}
-
-			if (feof(infile))
-				action = LZMA_FINISH;
-		}
-
-		lzma_ret ret = lzma_code(strm, action);
-
-		if (strm->avail_out == 0 || ret == LZMA_STREAM_END) {
-			size_t write_size = sizeof(outbuf) - strm->avail_out;
-
-			if (fwrite(outbuf, 1, write_size, outfile)
-					!= write_size) {
-				fprintf(stderr, "Write error: %s\n",
-						strerror(errno));
-				return false;
-			}
-
-			strm->next_out = outbuf;
-			strm->avail_out = sizeof(outbuf);
-		}
-
-		if (ret != LZMA_OK) {
-			if (ret == LZMA_STREAM_END)
-				return true;
-
-			const char *msg;
-			switch (ret) {
-			case LZMA_MEM_ERROR:
-				msg = "Memory allocation failed";
-				break;
-
-			case LZMA_DATA_ERROR:
-				msg = "File size limits exceeded";
-				break;
-
-			default:
-				msg = "Unknown error, possibly a bug";
-				break;
-			}
-
-			fprintf(stderr, "Encoder error: %s (error code %u)\n",
-					msg, ret);
-			return false;
-		}
-	}
-}
-
-
-extern int
-main(void)
-{
-	lzma_stream strm = LZMA_STREAM_INIT;
-
-	bool success = init_encoder(&strm);
-	if (success)
-		success = compress(&strm, stdin, stdout);
-
-	lzma_end(&strm);
-
-	if (fclose(stdout)) {
-		fprintf(stderr, "Write error: %s\n", strerror(errno));
-		success = false;
-	}
-
-	return success ? EXIT_SUCCESS : EXIT_FAILURE;
-}

doc/examples/11_file_info.c

@@ -1,205 +0,0 @@
-// SPDX-License-Identifier: 0BSD
-
-///////////////////////////////////////////////////////////////////////////////
-//
-/// \file       11_file_info.c
-/// \brief      Get uncompressed size of .xz file(s)
-///
-/// Usage:      ./11_file_info INFILE1.xz [INFILEn.xz]...
-///
-/// Example:    ./11_file_info foo.xz
-//
-//  Author:     Lasse Collin
-//
-///////////////////////////////////////////////////////////////////////////////
-
-#include <stdbool.h>
-#include <inttypes.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <lzma.h>
-
-
-static bool
-print_file_size(lzma_stream *strm, FILE *infile, const char *filename)
-{
-	// Get the file size. In standard C it can be done by seeking to
-	// the end of the file and then getting the file position.
-	// In POSIX one can use fstat() and then st_size from struct stat.
-	// Also note that fseek() and ftell() use long and thus don't support
-	// large files on 32-bit systems (POSIX versions fseeko() and
-	// ftello() can support large files).
-	if (fseek(infile, 0, SEEK_END)) {
-		fprintf(stderr, "Error seeking the file '%s': %s\n",
-				filename, strerror(errno));
-		return false;
-	}
-
-	const long file_size = ftell(infile);
-
-	// The decoder wants to start from the beginning of the .xz file.
-	rewind(infile);
-
-	// Initialize the decoder.
-	lzma_index *i;
-	lzma_ret ret = lzma_file_info_decoder(strm, &i, UINT64_MAX,
-			(uint64_t)file_size);
-	switch (ret) {
-	case LZMA_OK:
-		// Initialization succeeded.
-		break;
-
-	case LZMA_MEM_ERROR:
-		fprintf(stderr, "Out of memory when initializing "
-				"the .xz file info decoder\n");
-		return false;
-
-	case LZMA_PROG_ERROR:
-	default:
-		fprintf(stderr, "Unknown error, possibly a bug\n");
-		return false;
-	}
-
-	// This example program reuses the same lzma_stream structure
-	// for multiple files, so we need to reset this when starting
-	// a new file.
-	strm->avail_in = 0;
-
-	// Buffer for input data.
-	uint8_t inbuf[BUFSIZ];
-
-	// Pass data to the decoder and seek when needed.
-	while (true) {
-		if (strm->avail_in == 0) {
-			strm->next_in = inbuf;
-			strm->avail_in = fread(inbuf, 1, sizeof(inbuf),
-					infile);
-
-			if (ferror(infile)) {
-				fprintf(stderr,
-					"Error reading from '%s': %s\n",
-					filename, strerror(errno));
-				return false;
-			}
-
-			// We don't need to care about hitting the end of
-			// the file so no need to check for feof().
-		}
-
-		ret = lzma_code(strm, LZMA_RUN);
-
-		switch (ret) {
-		case LZMA_OK:
-			break;
-
-		case LZMA_SEEK_NEEDED:
-			// The cast is safe because liblzma won't ask us to
-			// seek past the known size of the input file which
-			// did fit into a long.
-			//
-			// NOTE: Remember to change these to off_t if you
-			// switch fseeko() or lseek().
-			if (fseek(infile, (long)(strm->seek_pos), SEEK_SET)) {
-				fprintf(stderr, "Error seeking the "
-						"file '%s': %s\n",
-						filename, strerror(errno));
-				return false;
-			}
-
-			// The old data in the inbuf is useless now. Set
-			// avail_in to zero so that we will read new input
-			// from the new file position on the next iteration
-			// of this loop.
-			strm->avail_in = 0;
-			break;
-
-		case LZMA_STREAM_END:
-			// File information was successfully decoded.
-			// See <lzma/index.h> for functions that can be
-			// used on it. In this example we just print
-			// the uncompressed size (in bytes) of
-			// the .xz file followed by its file name.
-			printf("%10" PRIu64 " %s\n",
-					lzma_index_uncompressed_size(i),
-					filename);
-
-			// Free the memory of the lzma_index structure.
-			lzma_index_end(i, NULL);
-
-			return true;
-
-		case LZMA_FORMAT_ERROR:
-			// .xz magic bytes weren't found.
-			fprintf(stderr, "The file '%s' is not "
-					"in the .xz format\n", filename);
-			return false;
-
-		case LZMA_OPTIONS_ERROR:
-			fprintf(stderr, "The file '%s' has .xz headers that "
-					"are not supported by this liblzma "
-					"version\n", filename);
-			return false;
-
-		case LZMA_DATA_ERROR:
-			fprintf(stderr, "The file '%s' is corrupt\n",
-					filename);
-			return false;
-
-		case LZMA_MEM_ERROR:
-			fprintf(stderr, "Memory allocation failed when "
-					"decoding the file '%s'\n", filename);
-			return false;
-
-		// LZMA_MEMLIMIT_ERROR shouldn't happen because we used
-		// UINT64_MAX as the limit.
-		//
-		// LZMA_BUF_ERROR shouldn't happen because we always provide
-		// new input when the input buffer is empty. The decoder
-		// knows the input file size and thus won't try to read past
-		// the end of the file.
-		case LZMA_MEMLIMIT_ERROR:
-		case LZMA_BUF_ERROR:
-		case LZMA_PROG_ERROR:
-		default:
-			fprintf(stderr, "Unknown error, possibly a bug\n");
-			return false;
-		}
-	}
-
-	// This line is never reached.
-}
-
-
-extern int
-main(int argc, char **argv)
-{
-	bool success = true;
-	lzma_stream strm = LZMA_STREAM_INIT;
-
-	for (int i = 1; i < argc; ++i) {
-		FILE *infile = fopen(argv[i], "rb");
-
-		if (infile == NULL) {
-			fprintf(stderr, "Cannot open the file '%s': %s\n",
-					argv[i], strerror(errno));
-			success = false;
-		}
-
-		success &= print_file_size(&strm, infile, argv[i]);
-
-		(void)fclose(infile);
-	}
-
-	lzma_end(&strm);
-
-	// Close stdout to catch possible write errors that can occur
-	// when pending data is flushed from the stdio buffers.
-	if (fclose(stdout)) {
-		fprintf(stderr, "Write error: %s\n", strerror(errno));
-		success = false;
-	}
-
-	return success ? EXIT_SUCCESS : EXIT_FAILURE;
-}

doc/examples/Makefile

@@ -1,5 +1,9 @@
-# SPDX-License-Identifier: 0BSD
+#
 # Author: Lasse Collin
+#
+# This file has been put into the public domain.
+# You can do whatever you want with this file.
+#
 
 CC = c99
 CFLAGS = -g
@@ -8,9 +12,7 @@ LDFLAGS = -llzma
 PROGS = \
 	01_compress_easy \
 	02_decompress \
-	03_compress_custom \
+	03_compress_custom
-	04_compress_easy_mt \
-	11_file_info
 
 all: $(PROGS)
 

doc/examples_old/xz_pipe_comp.c

@@ -0,0 +1,127 @@
+/*
+ * xz_pipe_comp.c
+ * A simple example of pipe-only xz compressor implementation.
+ * version: 2010-07-12 - by Daniel Mealha Cabrita
+ * Not copyrighted -- provided to the public domain.
+ *
+ * Compiling:
+ * Link with liblzma. GCC example:
+ * $ gcc -llzma xz_pipe_comp.c -o xz_pipe_comp
+ *
+ * Usage example:
+ * $ cat some_file | ./xz_pipe_comp > some_file.xz
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <stdbool.h>
+#include <lzma.h>
+
+
+/* COMPRESSION SETTINGS */
+
+/* analogous to xz CLI options: -0 to -9 */
+#define COMPRESSION_LEVEL 6
+
+/* boolean setting, analogous to xz CLI option: -e */
+#define COMPRESSION_EXTREME true
+
+/* see: /usr/include/lzma/check.h LZMA_CHECK_* */
+#define INTEGRITY_CHECK LZMA_CHECK_CRC64
+
+
+/* read/write buffer sizes */
+#define IN_BUF_MAX	4096
+#define OUT_BUF_MAX	4096
+
+/* error codes */
+#define RET_OK			0
+#define RET_ERROR_INIT		1
+#define RET_ERROR_INPUT		2
+#define RET_ERROR_OUTPUT	3
+#define RET_ERROR_COMPRESSION	4
+
+
+/* note: in_file and out_file must be open already */
+int xz_compress (FILE *in_file, FILE *out_file)
+{
+	uint32_t preset = COMPRESSION_LEVEL | (COMPRESSION_EXTREME ? LZMA_PRESET_EXTREME : 0);
+	lzma_check check = INTEGRITY_CHECK;
+	lzma_stream strm = LZMA_STREAM_INIT; /* alloc and init lzma_stream struct */
+	uint8_t in_buf [IN_BUF_MAX];
+	uint8_t out_buf [OUT_BUF_MAX];
+	size_t in_len;	/* length of useful data in in_buf */
+	size_t out_len;	/* length of useful data in out_buf */
+	bool in_finished = false;
+	bool out_finished = false;
+	lzma_action action;
+	lzma_ret ret_xz;
+	int ret;
+
+	ret = RET_OK;
+
+	/* initialize xz encoder */
+	ret_xz = lzma_easy_encoder (&strm, preset, check);
+	if (ret_xz != LZMA_OK) {
+		fprintf (stderr, "lzma_easy_encoder error: %d\n", (int) ret_xz);
+		return RET_ERROR_INIT;
+	}
+
+	while ((! in_finished) && (! out_finished)) {
+		/* read incoming data */
+		in_len = fread (in_buf, 1, IN_BUF_MAX, in_file);
+
+		if (feof (in_file)) {
+			in_finished = true;
+		}
+		if (ferror (in_file)) {
+			in_finished = true;
+			ret = RET_ERROR_INPUT;
+		}
+
+		strm.next_in = in_buf;
+		strm.avail_in = in_len;
+
+		/* if no more data from in_buf, flushes the
+		   internal xz buffers and closes the xz data
+		   with LZMA_FINISH */
+		action = in_finished ? LZMA_FINISH : LZMA_RUN;
+
+		/* loop until there's no pending compressed output */
+		do {
+			/* out_buf is clean at this point */
+			strm.next_out = out_buf;
+			strm.avail_out = OUT_BUF_MAX;
+
+			/* compress data */
+			ret_xz = lzma_code (&strm, action);
+
+			if ((ret_xz != LZMA_OK) && (ret_xz != LZMA_STREAM_END)) {
+				fprintf (stderr, "lzma_code error: %d\n", (int) ret_xz);
+				out_finished = true;
+				ret = RET_ERROR_COMPRESSION;
+			} else {
+				/* write compressed data */
+				out_len = OUT_BUF_MAX - strm.avail_out;
+				fwrite (out_buf, 1, out_len, out_file);
+				if (ferror (out_file)) {
+					out_finished = true;
+					ret = RET_ERROR_OUTPUT;
+				}
+			}
+		} while (strm.avail_out == 0);
+	}
+
+	lzma_end (&strm);
+	return ret;
+}
+
+int main ()
+{
+	int ret;
+
+	ret = xz_compress (stdin, stdout);
+	return ret;
+}
+

doc/examples_old/xz_pipe_decomp.c

@@ -0,0 +1,123 @@
+/*
+ * xz_pipe_decomp.c
+ * A simple example of pipe-only xz decompressor implementation.
+ * version: 2012-06-14 - by Daniel Mealha Cabrita
+ * Not copyrighted -- provided to the public domain.
+ *
+ * Compiling:
+ * Link with liblzma. GCC example:
+ * $ gcc -llzma xz_pipe_decomp.c -o xz_pipe_decomp
+ *
+ * Usage example:
+ * $ cat some_file.xz | ./xz_pipe_decomp > some_file
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <stdbool.h>
+#include <lzma.h>
+
+
+/* read/write buffer sizes */
+#define IN_BUF_MAX	4096
+#define OUT_BUF_MAX	4096
+
+/* error codes */
+#define RET_OK			0
+#define RET_ERROR_INIT		1
+#define RET_ERROR_INPUT		2
+#define RET_ERROR_OUTPUT	3
+#define RET_ERROR_DECOMPRESSION	4
+
+
+/* note: in_file and out_file must be open already */
+int xz_decompress (FILE *in_file, FILE *out_file)
+{
+	lzma_stream strm = LZMA_STREAM_INIT; /* alloc and init lzma_stream struct */
+	const uint32_t flags = LZMA_TELL_UNSUPPORTED_CHECK | LZMA_CONCATENATED;
+	const uint64_t memory_limit = UINT64_MAX; /* no memory limit */
+	uint8_t in_buf [IN_BUF_MAX];
+	uint8_t out_buf [OUT_BUF_MAX];
+	size_t in_len;	/* length of useful data in in_buf */
+	size_t out_len;	/* length of useful data in out_buf */
+	bool in_finished = false;
+	bool out_finished = false;
+	lzma_action action;
+	lzma_ret ret_xz;
+	int ret;
+
+	ret = RET_OK;
+
+	/* initialize xz decoder */
+	ret_xz = lzma_stream_decoder (&strm, memory_limit, flags);
+	if (ret_xz != LZMA_OK) {
+		fprintf (stderr, "lzma_stream_decoder error: %d\n", (int) ret_xz);
+		return RET_ERROR_INIT;
+	}
+
+	while ((! in_finished) && (! out_finished)) {
+		/* read incoming data */
+		in_len = fread (in_buf, 1, IN_BUF_MAX, in_file);
+
+		if (feof (in_file)) {
+			in_finished = true;
+		}
+		if (ferror (in_file)) {
+			in_finished = true;
+			ret = RET_ERROR_INPUT;
+		}
+
+		strm.next_in = in_buf;
+		strm.avail_in = in_len;
+
+		/* if no more data from in_buf, flushes the
+		   internal xz buffers and closes the decompressed data
+		   with LZMA_FINISH */
+		action = in_finished ? LZMA_FINISH : LZMA_RUN;
+
+		/* loop until there's no pending decompressed output */
+		do {
+			/* out_buf is clean at this point */
+			strm.next_out = out_buf;
+			strm.avail_out = OUT_BUF_MAX;
+
+			/* decompress data */
+			ret_xz = lzma_code (&strm, action);
+
+			if ((ret_xz != LZMA_OK) && (ret_xz != LZMA_STREAM_END)) {
+				fprintf (stderr, "lzma_code error: %d\n", (int) ret_xz);
+				out_finished = true;
+				ret = RET_ERROR_DECOMPRESSION;
+			} else {
+				/* write decompressed data */
+				out_len = OUT_BUF_MAX - strm.avail_out;
+				fwrite (out_buf, 1, out_len, out_file);
+				if (ferror (out_file)) {
+					out_finished = true;
+					ret = RET_ERROR_OUTPUT;
+				}
+			}
+		} while (strm.avail_out == 0);
+	}
+
+	/* Bug fix (2012-06-14): If no errors were detected, check
+	   that the last lzma_code() call returned LZMA_STREAM_END.
+	   If not, the file is probably truncated. */
+	if ((ret == RET_OK) && (ret_xz != LZMA_STREAM_END)) {
+		fprintf (stderr, "Input truncated or corrupt\n");
+		ret = RET_ERROR_DECOMPRESSION;
+	}
+
+	lzma_end (&strm);
+	return ret;
+}
+
+int main ()
+{
+	int ret;
+
+	ret = xz_decompress (stdin, stdout);
+	return ret;
+}
+

doc/faq.txt

@@ -33,7 +33,7 @@ A:  7-Zip and LZMA SDK are the original projects. LZMA SDK is roughly
     LZMA Utils.
 
     There are several other projects using LZMA. Most are more or less
-    based on LZMA SDK. See <https://7-zip.org/links.html>.
+    based on LZMA SDK. See <http://7-zip.org/links.html>.
 
 
 Q:  Why is liblzma named liblzma if its primary file format is .xz?
@@ -115,6 +115,7 @@ Q:  I cannot find BCJ and BCJ2 filters. Don't they exist in liblzma?
 
 A:  BCJ filter is called "x86" in liblzma. BCJ2 is not included,
     because it requires using more than one encoded output stream.
+    A streamable version of BCJ2-style filtering is planned.
 
 
 Q:  I need to use a script that runs "xz -9". On a system with 256 MiB
@@ -153,15 +154,19 @@ A:  See the documentation in XZ Embedded. In short, something like
     dictionary doesn't increase memory usage.
 
 
-Q:  How is multi-threaded compression implemented in XZ Utils?
+Q:  Will xz support threaded compression?
 
-A:  The simplest method is splitting the uncompressed data into blocks
+A:  It is planned and has been taken into account when designing
+    the .xz file format. Eventually there will probably be three types
+    of threading, each method having its own advantages and disadvantages.
+
+    The simplest method is splitting the uncompressed data into blocks
     and compressing them in parallel independent from each other.
-    This is currently the only threading method supported in XZ Utils.
     Since the blocks are compressed independently, they can also be
     decompressed independently. Together with the index feature in .xz,
     this allows using threads to create .xz files for random-access
-    reading. This also makes threaded decompression possible.
+    reading. This also makes threaded decompression possible, although
+    it is not clear if threaded decompression will ever be implemented.
 
     The independent blocks method has a couple of disadvantages too. It
     will compress worse than a single-block method. Often the difference
@@ -169,17 +174,15 @@ A:  The simplest method is splitting the uncompressed data into blocks
     the memory usage of the compressor increases linearly when adding
     threads.
 
-    At least two other threading methods are possible but these haven't
+    Match finder parallelization is another threading method. It has
-    been implemented in XZ Utils:
+    been in 7-Zip for ages. It doesn't affect compression ratio or
-
+    memory usage significantly. Among the three threading methods, only
-    Match finder parallelization has been in 7-Zip for ages. It doesn't
+    this is useful when compressing small files (files that are not
-    affect compression ratio or memory usage significantly. Among the
+    significantly bigger than the dictionary). Unfortunately this method
-    three threading methods, only this is useful when compressing small
+    scales only to about two CPU cores.
-    files (files that are not significantly bigger than the dictionary).
-    Unfortunately this method scales only to about two CPU cores.
 
     The third method is pigz-style threading (I use that name, because
-    pigz <https://www.zlib.net/pigz/> uses that method). It doesn't
+    pigz <http://www.zlib.net/pigz/> uses that method). It doesn't
     affect compression ratio significantly and scales to many cores.
     The memory usage scales linearly when threads are added. This isn't
     significant with pigz, because Deflate uses only a 32 KiB dictionary,
@@ -190,35 +193,12 @@ A:  The simplest method is splitting the uncompressed data into blocks
     cores the overhead is not a big deal anymore.
 
     Combining the threading methods will be possible and also useful.
-    For example, combining match finder parallelization with pigz-style
+    E.g. combining match finder parallelization with pigz-style threading
-    threading or independent-blocks-threading can cut the memory usage
+    can cut the memory usage by 50 %.
-    by 50 %.
 
-
+    It is possible that the single-threaded method will be modified to
-Q:  I told xz to use many threads but it is using only one or two
+    create files identical to the pigz-style method. We'll see once
-    processor cores. What is wrong?
+    pigz-style threading has been implemented in liblzma.
-
-A:  Since multi-threaded compression is done by splitting the data into
-    blocks that are compressed individually, if the input file is too
-    small for the block size, then many threads cannot be used. The
-    default block size increases when the compression level is
-    increased. For example, xz -6 uses 8 MiB LZMA2 dictionary and
-    24 MiB blocks, and xz -9 uses 64 MiB LZMA dictionary and 192 MiB
-    blocks. If the input file is 100 MiB, xz -6 can use five threads
-    of which one will finish quickly as it has only 4 MiB to compress.
-    However, for the same file, xz -9 can only use one thread.
-
-    One can adjust block size with --block-size=SIZE but making the
-    block size smaller than LZMA2 dictionary is waste of RAM: using
-    xz -9 with 6 MiB blocks isn't any better than using xz -6 with
-    6 MiB blocks. The default settings use a block size bigger than
-    the LZMA2 dictionary size because this was seen as a reasonable
-    compromise between RAM usage and compression ratio.
-
-    When decompressing, the ability to use threads depends on how the
-    file was created. If it was created in multi-threaded mode then
-    it can be decompressed in multi-threaded mode too if there are
-    multiple blocks in the file.
 
 
 Q:  How do I build a program that needs liblzmadec (lzmadec.h)?
@@ -226,7 +206,7 @@ Q:  How do I build a program that needs liblzmadec (lzmadec.h)?
 A:  liblzmadec is part of LZMA Utils. XZ Utils has liblzma, but no
     liblzmadec. The code using liblzmadec should be ported to use
     liblzma instead. If you cannot or don't want to do that, download
-    LZMA Utils from <https://tukaani.org/lzma/>.
+    LZMA Utils from <http://tukaani.org/lzma/>.
 
 
 Q:  The default build of liblzma is too big. How can I make it smaller?
@@ -240,5 +220,5 @@ A:  Give --enable-small to the configure script. Use also appropriate
     If the result is still too big, take a look at XZ Embedded. It is
     a separate project, which provides a limited but significantly
     smaller XZ decoder implementation than XZ Utils. You can find it
-    at <https://xz.tukaani.org/xz-embedded/>.
+    at <http://tukaani.org/xz/embedded.html>.
 

doc/lzma-file-format.txt

@@ -40,11 +40,7 @@ The .lzma File Format
 
 0.2. Changes
 
-        Last modified: 2024-01-16 18:00+0800
+        Last modified: 2011-04-12 11:55+0300
-
-        Compared to the previous version (2022-07-13 21:00+0300)
-        the section 2 was modified to change links from http to
-        https and to update XZ links.
 
 
 1. File Format
@@ -133,10 +129,7 @@ The .lzma File Format
         Uncompressed Size is stored as unsigned 64-bit little endian
         integer. A special value of 0xFFFF_FFFF_FFFF_FFFF indicates
         that Uncompressed Size is unknown. End of Payload Marker (*)
-        is used if Uncompressed Size is unknown. End of Payload Marker
+        is used if and only if Uncompressed Size is unknown.
-        is allowed but rarely used if Uncompressed Size is known.
-        XZ Utils 5.2.5 and older don't support .lzma files that have
-        End of Payload Marker together with a known Uncompressed Size.
 
         XZ Utils rejects files whose Uncompressed Size field specifies
         a known size that is 256 GiB or more. This is to reject false
@@ -157,17 +150,17 @@ The .lzma File Format
 2. References
 
         LZMA SDK - The original LZMA implementation
-        https://7-zip.org/sdk.html
+        http://7-zip.org/sdk.html
 
         7-Zip
-        https://7-zip.org/
+        http://7-zip.org/
 
         LZMA Utils - LZMA adapted to POSIX-like systems
-        https://tukaani.org/lzma/
+        http://tukaani.org/lzma/
 
         XZ Utils - The next generation of LZMA Utils
-        https://xz.tukaani.org/xz-utils/
+        http://tukaani.org/xz/
 
         The .xz file format - The successor of the .lzma format
-        https://xz.tukaani.org/format/xz-file-format.txt
+        http://tukaani.org/xz/xz-file-format.txt
 

doc/xz-file-format.txt

@@ -2,7 +2,7 @@
 The .xz File Format
 ===================
 
-Version 1.2.0 (2024-01-19)
+Version 1.0.4 (2009-08-27)
 
 
         0. Preface
@@ -81,26 +81,18 @@ Version 1.2.0 (2024-01-19)
 0.2. Getting the Latest Version
 
         The latest official version of this document can be downloaded
-        from <https://xz.tukaani.org/format/xz-file-format.txt>.
+        from <http://tukaani.org/xz/xz-file-format.txt>.
 
         Specific versions of this document have a filename
         xz-file-format-X.Y.Z.txt where X.Y.Z is the version number.
         For example, the version 1.0.0 of this document is available
-        at <https://xz.tukaani.org/format/xz-file-format-1.0.0.txt>.
+        at <http://tukaani.org/xz/xz-file-format-1.0.0.txt>.
 
 
 0.3. Version History
 
         Version   Date          Description
 
-        1.2.0     2024-01-19    Added RISC-V filter and updated URLs in
-                                Sections 0.2 and 7. The URL of this
-                                specification was changed.
-
-        1.1.0     2022-12-11    Added ARM64 filter and clarified 32-bit
-                                ARM endianness in Section 5.3.2,
-                                language improvements in Section 5.4
-
         1.0.4     2009-08-27    Language improvements in Sections 1.2,
                                 2.1.1.2, 3.1.1, 3.1.2, and 5.3.1
 
@@ -923,21 +915,9 @@ Version 1.2.0 (2024-01-19)
               0x04       1 byte     x86 filter (BCJ)
               0x05       4 bytes    PowerPC (big endian) filter
               0x06      16 bytes    IA64 filter
-              0x07       4 bytes    ARM filter [1]
+              0x07       4 bytes    ARM (little endian) filter
-              0x08       2 bytes    ARM Thumb filter [1]
+              0x08       2 bytes    ARM Thumb (little endian) filter
               0x09       4 bytes    SPARC filter
-              0x0A       4 bytes    ARM64 filter [2]
-              0x0B       2 bytes    RISC-V filter
-
-              [1] These are for little endian instruction encoding.
-                  This must not be confused with data endianness.
-                  A processor configured for big endian data access
-                  may still use little endian instruction encoding.
-                  The filters don't care about the data endianness.
-
-              [2] 4096-byte alignment gives the best results
-                  because the address in the ADRP instruction
-                  is a multiple of 4096 bytes.
 
         If the size of Filter Properties is four bytes, the Filter
         Properties field contains the start offset used for address
@@ -1007,12 +987,12 @@ Version 1.2.0 (2024-01-19)
 
 5.4. Custom Filter IDs
 
-        If a developer wants to use custom Filter IDs, there are two
+        If a developer wants to use custom Filter IDs, he has two
         choices. The first choice is to contact Lasse Collin and ask
         him to allocate a range of IDs for the developer.
 
-        The second choice is to generate a 40-bit random integer
+        The second choice is to generate a 40-bit random integer,
-        which the developer can use as a personal Developer ID.
+        which the developer can use as his personal Developer ID.
         To minimize the risk of collisions, Developer ID has to be
         a randomly generated integer, not manually selected "hex word".
         The following command, which works on many free operating
@@ -1020,7 +1000,7 @@ Version 1.2.0 (2024-01-19)
 
             dd if=/dev/urandom bs=5 count=1 | hexdump
 
-        The developer can then use the Developer ID to create unique
+        The developer can then use his Developer ID to create unique
         (well, hopefully unique) Filter IDs.
 
             Bits    Mask                    Description
@@ -1141,30 +1121,30 @@ Version 1.2.0 (2024-01-19)
 7. References
 
         LZMA SDK - The original LZMA implementation
-        https://7-zip.org/sdk.html
+        http://7-zip.org/sdk.html
 
         LZMA Utils - LZMA adapted to POSIX-like systems
-        https://tukaani.org/lzma/
+        http://tukaani.org/lzma/
 
         XZ Utils - The next generation of LZMA Utils
-        https://xz.tukaani.org/xz-utils/
+        http://tukaani.org/xz/
 
         [RFC-1952]
         GZIP file format specification version 4.3
-        https://www.ietf.org/rfc/rfc1952.txt
+        http://www.ietf.org/rfc/rfc1952.txt
           - Notation of byte boxes in section "2.1. Overall conventions"
 
         [RFC-2119]
         Key words for use in RFCs to Indicate Requirement Levels
-        https://www.ietf.org/rfc/rfc2119.txt
+        http://www.ietf.org/rfc/rfc2119.txt
 
         [GNU-tar]
-        GNU tar 1.35 manual
+        GNU tar 1.21 manual
-        https://www.gnu.org/software/tar/manual/html_node/Blocking-Factor.html
+        http://www.gnu.org/software/tar/manual/html_node/Blocking-Factor.html
           - Node 9.4.2 "Blocking Factor", paragraph that begins
             "gzip will complain about trailing garbage"
           - Note that this URL points to the latest version of the
             manual, and may some day not contain the note which is in
-            1.35. For the exact version of the manual, download GNU
+            1.21. For the exact version of the manual, download GNU
-            tar 1.35: ftp://ftp.gnu.org/pub/gnu/tar/tar-1.35.tar.gz
+            tar 1.21: ftp://ftp.gnu.org/pub/gnu/tar/tar-1.21.tar.gz
 

dos/INSTALL.txt

@@ -1,78 +0,0 @@
-
-Building XZ Utils for DOS
-=========================
-
-Introduction
-
-    This document explains how to build XZ Utils for DOS using DJGPP.
-    The resulting binaries should run at least on various DOS versions
-    and under Windows 95/98/98SE/ME.
-
-    This is somewhat experimental and has got very little testing.
-
-    Note: Makefile and config.h are updated only now and then. This
-    means that if you checked out a development version, building for
-    DOS might not work without updating Makefile and config.h first.
-
-
-Getting and Installing DJGPP
-
-    You may use <https://www.delorie.com/djgpp/zip-picker.html> to help
-    deciding what to download. If you are only interested in building
-    XZ Utils, the zip-picker may list files that you don't strictly
-    need. However, using the zip-picker can still be worth it to get a
-    nice short summary of installation instructions (they can be found
-    from readme.1st too).
-
-    For a more manual method, first select a mirror from
-    <https://www.delorie.com/djgpp/getting.html> and go the
-    subdirectory named "current". You need the following files:
-
-        unzip32.exe  (if you don't already have a LFN-capable unzipper)
-        v2/djdev205.zip
-        v2gnu/bnu234b.zip
-        v2gnu/gcc920b.zip
-        v2gnu/mak43b.zip
-        v2misc/csdpmi7b.zip
-
-    If newer versions are available, probably you should try them first.
-    Note that versions older than djdev205.zip aren't supported. Also
-    note that you want csdpmi7b.zip even if you run under Windows or
-    DOSEMU because the XZ Utils Makefile will embed cwsdstub.exe to
-    the resulting xz.exe.
-
-    See the instructions in readme.1st found from djdev205.zip. Here's
-    a short summary, but you should still read readme.1st.
-
-        C:\> mkdir DJGPP
-        C:\> cd DJGPP
-        C:\DJGPP> c:\download\unzip32 c:\download\djdev205.zip
-        C:\DJGPP> c:\download\unzip32 c:\download\bnu234b.zip
-        C:\DJGPP> c:\download\unzip32 c:\download\gcc920b.zip
-        C:\DJGPP> c:\download\unzip32 c:\download\mak43b.zip
-        C:\DJGPP> c:\download\unzip32 c:\download\csdpmi7b.zip
-
-        C:\DJGPP> set PATH=C:\DJGPP\BIN;%PATH%
-        C:\DJGPP> set DJGPP=C:\DJGPP\DJGPP.ENV
-
-    You may want to add the last two lines into AUTOEXEC.BAT or have,
-    for example, DJGPP.BAT which you can run before using DJGPP.
-
-    Make sure you use completely upper case path in the DJGPP environment
-    variable. This is not required by DJGPP, but the XZ Utils Makefile is
-    a bit stupid and expects that everything in DJGPP environment variable
-    is uppercase.
-
-
-Building
-
-    You need to have an environment that supports long filenames (LFN).
-    Once you have built XZ Utils, the resulting binaries can be run
-    without long filename support.
-
-    Run "make" in this directory (the directory containing this
-    INSTALL.txt). You should get xz.exe (and a bunch of temporary files).
-    Other tools are not built. Having e.g. xzdec.exe doesn't save much
-    space compared to xz.exe because the DJGPP runtime makes the .exe
-    quite big anyway.
-

dos/Makefile

@@ -1,11 +1,12 @@
-# SPDX-License-Identifier: 0BSD
-
 ###############################################################################
 #
 # Makefile to build XZ Utils using DJGPP
 #
 # Author: Lasse Collin
 #
+# This file has been put into the public domain.
+# You can do whatever you want with this file.
+#
 ###############################################################################
 
 # For debugging, set comment "#define NDEBUG 1" from config.h to enable
@@ -17,7 +18,9 @@ CPPFLAGS =
 CFLAGS = -g -Wall -Wextra -Wfatal-errors -march=i386 -mtune=i686 -O2
 LDFLAGS = -lemu
 
-ALL_CFLAGS = -std=gnu99
+# NOTE: -fgnu89-inline is needed on DJGPP 2.04 beta and GCC >= 4.3.0
+# because time.h uses GNU-style "extern inline".
+ALL_CFLAGS = -std=gnu99 -fgnu89-inline
 
 ALL_CPPFLAGS = \
 	-I. \
@@ -61,7 +64,6 @@ SRCS_C = \
 	../src/liblzma/common/block_header_encoder.c \
 	../src/liblzma/common/block_util.c \
 	../src/liblzma/common/common.c \
-	../src/liblzma/common/file_info.c \
 	../src/liblzma/common/filter_common.c \
 	../src/liblzma/common/filter_decoder.c \
 	../src/liblzma/common/filter_encoder.c \
@@ -72,13 +74,11 @@ SRCS_C = \
 	../src/liblzma/common/index_decoder.c \
 	../src/liblzma/common/index_encoder.c \
 	../src/liblzma/common/index_hash.c \
-	../src/liblzma/common/lzip_decoder.c \
 	../src/liblzma/common/stream_decoder.c \
 	../src/liblzma/common/stream_encoder.c \
 	../src/liblzma/common/stream_flags_common.c \
 	../src/liblzma/common/stream_flags_decoder.c \
 	../src/liblzma/common/stream_flags_encoder.c \
-	../src/liblzma/common/string_conversion.c \
 	../src/liblzma/common/vli_decoder.c \
 	../src/liblzma/common/vli_encoder.c \
 	../src/liblzma/common/vli_size.c \
@@ -98,7 +98,6 @@ SRCS_C = \
 	../src/liblzma/lzma/lzma_encoder_presets.c \
 	../src/liblzma/rangecoder/price_table.c \
 	../src/liblzma/simple/arm.c \
-	../src/liblzma/simple/arm64.c \
 	../src/liblzma/simple/armthumb.c \
 	../src/liblzma/simple/ia64.c \
 	../src/liblzma/simple/powerpc.c \
@@ -114,7 +113,6 @@ SRCS_C = \
 	../src/xz/list.c \
 	../src/xz/main.c \
 	../src/xz/message.c \
-	../src/xz/mytime.c \
 	../src/xz/options.c \
 	../src/xz/signals.c \
 	../src/xz/suffix.c \

dos/README

@@ -0,0 +1,88 @@
+
+XZ Utils on DOS
+===============
+
+Introduction
+
+    This document explains how to build XZ Utils for DOS using DJGPP.
+    The resulting binaries should run at least on various DOS versions
+    and under Windows 95/98/98SE/ME, although the Windows version of
+    XZ Utils is recommended under Windows 95 and later.
+
+    This is currently experimental and has got very little testing.
+
+    Note: Makefile and config.h are updated only now and then. This
+    means that especially if you checked out a development version,
+    building for DOS probably won't work without updating Makefile
+    and config.h first.
+
+
+Getting and Installing DJGPP
+
+    You may use <http://www.delorie.com/djgpp/zip-picker.html> to help
+    deciding what to download, but as of writing (2010-10-09) that may
+    not be the most convenient way taking into account what components
+    are actually required to build XZ Utils. However, using the
+    zip-picker can still be worth doing to get nice short summary of
+    installation instructions (they can be found from readme.1st too).
+
+    For a more manual method, first select a mirror from
+    <http://www.delorie.com/djgpp/getting.html>. You need
+    the following files:
+
+        unzip32.exe  (if you don't already have a LFN-capable unzipper)
+        beta/v2/djdev204.zip
+        v2gnu/bnu219b.zip
+        v2gnu/gcc444b.zip
+        v2gnu/mak3791b.zip
+        v2misc/csdpmi7b.zip
+
+    If newer versions are available, probably you should try them first.
+    Note that djdev203.zip is too old to build XZ Utils; you need at
+    least djdev204.zip. Also note that you want csdpmi7b.zip even if you
+    run under Windows or DOSEMU, because the XZ Utils Makefile will embed
+    cwsdstub.exe to the resulting binaries.
+
+    See the instructions in readme.1st found from djdev204.zip. Here's
+    a short summary, but you should still read readme.1st.
+
+        C:\> mkdir DJGPP
+        C:\> cd DJGPP
+        C:\DJGPP> c:\download\unzip32 c:\download\djdev204.zip
+        C:\DJGPP> c:\download\unzip32 c:\download\bnu219b.zip
+        C:\DJGPP> c:\download\unzip32 c:\download\gcc444b.zip
+        C:\DJGPP> c:\download\unzip32 c:\download\mak3791b.zip
+        C:\DJGPP> c:\download\unzip32 c:\download\csdpmi7b.zip
+
+        C:\DJGPP> set PATH=C:\DJGPP\BIN;%PATH%
+        C:\DJGPP> set DJGPP=C:\DJGPP\DJGPP.ENV
+
+    You may want to add the last two lines into AUTOEXEC.BAT or have,
+    for example, DJGPP.BAT which you can run before using DJGPP.
+
+    Make sure you use completely upper case path in the DJGPP environment
+    variable. This is not required by DJGPP, but the XZ Utils Makefile is
+    a bit stupid and expects that everything in DJGPP environment variable
+    is uppercase.
+
+
+Building
+
+    You need to have an environment that supports long filenames (LFN).
+    Once you have built XZ Utils, the resulting binaries can be run
+    without long filename support.
+
+    Run "make" in this directory (the directory containing this README).
+    You should get xz.exe (and a bunch of temporary files). Other tools
+    are not built. Having e.g. xzdec.exe doesn't save much space compared
+    to xz.exe, because the DJGPP runtime makes the .exe quite big anyway.
+
+
+Bugs
+
+    xz doesn't necessarily work in Dosbox. It should work in DOSEMU.
+
+    Pressing Ctrl-c or Ctrl-Break won't remove the incomplete target file
+    when running under Windows XP Command Prompt (something goes wrong
+    with SIGINT handling). It works correctly under Windows 95/98/98SE/ME.
+

dos/README.txt

@@ -1,123 +0,0 @@
-
-XZ Utils on DOS
-===============
-
-DOS-specific filename handling
-
-    xz detects at runtime if long filename (LFN) support is
-    available and will use it by default. It can be disabled by
-    setting an environment variable:
-
-        set lfn=n
-
-    When xz is in LFN mode, it behaves pretty much the same as it
-    does on other operating systems. Examples:
-
-        xz foo.tar          -> foo.tar.xz
-        xz -d foo.tar.xz    -> foo.tar
-
-        xz -F lzma foo.tar  -> foo.tar.lzma
-        xz -d foo.tar.lzma  -> foo.tar
-
-    When LFN support isn't available or it is disabled with LFN=n
-    environment setting, xz works in short filename (SFN) mode. This
-    affects filename suffix handling when compressing.
-
-    When compressing to the .xz format in SFN mode:
-
-      - Files without an extension get .xz just like on LFN systems.
-
-      - *.tar files become *.txz (shorthand for *.tar.xz). *.txz
-        is recognized by xz on all supported operating systems.
-        (Try to avoid confusing this with gzipped .txt files.)
-
-      - Files with 1-3 character extension have their extension modified
-        so that the last character is a dash ("-"). If the extension
-        is already three characters, the last character is lost. The
-        resulting *.?- or *.??- filename is recognized in LFN mode, but
-        it isn't recognized by xz on other operating systems.
-
-    Examples:
-
-        xz foo              -> foo.xz     |   xz -d foo.xz    -> foo
-        xz foo.tar          -> foo.txz    |   xz -d foo.txz   -> foo.tar
-        xz foo.c            -> foo.c-     |   xz -d foo.c-    -> foo.c
-        xz read.me          -> read.me-   |   xz -d read.me-  -> read.me
-        xz foo.txt          -> foo.tx-    |   xz -d foo.tx-   -> foo.tx   !
-
-    Note that in the last example above, the third character of the
-    filename extension is lost.
-
-    When compressing to the legacy .lzma format in SFN mode:
-
-      - *.tar files become *.tlz (shorthand for *.tar.lzma). *.tlz
-        is recognized by xz on all supported operating systems.
-
-      - Other files become *.lzm. The original filename extension
-        is lost. *.lzm is recognized also in LFN mode, but it is not
-        recognized by xz on other operating systems.
-
-    Examples:
-
-        xz -F lzma foo      -> foo.lzm    |   xz -d foo.lzm   -> foo
-        xz -F lzma foo.tar  -> foo.tlz    |   xz -d foo.tlz   -> foo.tar
-        xz -F lzma foo.c    -> foo.lzm    |   xz -d foo.lzm   -> foo      !
-        xz -F lzma read.me  -> read.lzm   |   xz -d read.lzm  -> read     !
-        xz -F lzma foo.txt  -> foo.lzm    |   xz -d foo.lzm   -> foo      !
-
-    When compressing with a custom suffix (-S .SUF, --suffix=.SUF) to
-    any file format:
-
-      - If the suffix begins with a dot, the filename extension is
-        replaced with the new suffix. The original extension is lost.
-
-      - If the suffix doesn't begin with a dot and the filename has no
-        extension and the filename given on the command line doesn't
-        have a dot at the end, the custom suffix is appended just like
-        on LFN systems.
-
-      - If the suffix doesn't begin with a dot and the filename has
-        an extension (or an extension-less filename is given with a dot
-        at the end), the last 1-3 characters of the filename extension
-        may get overwritten to fit the given custom suffix.
-
-    Examples:
-
-        xz -S x foo        -> foox      |  xz -dS x foox      -> foo
-        xz -S x foo.       -> foo.x     |  xz -dS x foo.x     -> foo
-        xz -S .x foo       -> foo.x     |  xz -dS .x foo.x    -> foo
-        xz -S .x foo.      -> foo.x     |  xz -dS .x foo.x    -> foo
-        xz -S x.y foo      -> foox.y    |  xz -dS x.y foox.y  -> foo
-        xz -S .a foo.c     -> foo.a     |  xz -dS .a foo.a    -> foo      !
-        xz -S a  foo.c     -> foo.ca    |  xz -dS a foo.ca    -> foo.c
-        xz -S ab foo.c     -> foo.cab   |  xz -dS ab foo.cab  -> foo.c
-        xz -S ab read.me   -> read.mab  |  xz -dS ab read.mab -> read.m   !
-        xz -S ab foo.txt   -> foo.tab   |  xz -dS ab foo.tab  -> foo.t    !
-        xz -S abc foo.txt  -> foo.abc   |  xz -dS abc foo.abc -> foo      !
-
-    When decompressing, the suffix handling in SFN mode is the same as
-    in LFN mode. The DOS-specific filenames *.lzm, *.?-, and *.??- are
-    recognized also in LFN mode.
-
-    xz handles certain uncommon situations safely:
-
-      - If the generated output filename refers to the same file as
-        the input file, xz detects this and refuses to compress or
-        decompress the input file even if --force is used. This can
-        happen when giving an overlong filename in SFN mode. E.g.
-        "xz -S x foo.texinfo" would try to write to foo.tex which on
-        SFN system is the same file as foo.texinfo.
-
-      - If the generated output filename is a special file like "con"
-        or "prn", xz detects this and refuses to compress or decompress
-        the input file even if --force is used.
-
-
-Bugs
-
-    xz doesn't necessarily work in Dosbox. It should work in DOSEMU.
-
-    Pressing Ctrl-c or Ctrl-Break won't remove the incomplete target file
-    when running under Windows XP Command Prompt (something goes wrong
-    with SIGINT handling). It works correctly under Windows 95/98/98SE/ME.
-

dos/config.h

@@ -1,5 +1,3 @@
-/* SPDX-License-Identifier: 0BSD */
-
 /* How many MiB of RAM to assume if the real amount cannot be determined. */
 #define ASSUME_RAM 32
 
@@ -12,15 +10,9 @@
 /* Define to 1 if sha256 integrity check is enabled. */
 #define HAVE_CHECK_SHA256 1
 
-/* Define to 1 if any of HAVE_DECODER_foo have been defined. */
-#define HAVE_DECODERS 1
-
 /* Define to 1 if arm decoder is enabled. */
 #define HAVE_DECODER_ARM 1
 
-/* Define to 1 if arm64 decoder is enabled. */
-#define HAVE_DECODER_ARM64 1
-
 /* Define to 1 if armthumb decoder is enabled. */
 #define HAVE_DECODER_ARMTHUMB 1
 
@@ -45,15 +37,9 @@
 /* Define to 1 if x86 decoder is enabled. */
 #define HAVE_DECODER_X86 1
 
-/* Define to 1 if any of HAVE_ENCODER_foo have been defined. */
-#define HAVE_ENCODERS 1
-
 /* Define to 1 if arm encoder is enabled. */
 #define HAVE_ENCODER_ARM 1
 
-/* Define to 1 if arm64 encoder is enabled. */
-#define HAVE_ENCODER_ARM64 1
-
 /* Define to 1 if armthumb encoder is enabled. */
 #define HAVE_ENCODER_ARMTHUMB 1
 
@@ -84,9 +70,6 @@
 /* Define to 1 if you have the <limits.h> header file. */
 #define HAVE_LIMITS_H 1
 
-/* Define to 1 if .lz (lzip) decompression support is enabled. */
-#define HAVE_LZIP_DECODER 1
-
 /* Define to 1 to enable bt2 match finder. */
 #define HAVE_MF_BT2 1
 
@@ -117,37 +100,29 @@
 /* Define to 1 if you have the <sys/time.h> header file. */
 #define HAVE_SYS_TIME_H 1
 
-/* Define to 1 if you have the 'utimes' function. */
+/* Define to 1 if you have the `utimes' function. */
 #define HAVE_UTIMES 1
 
 /* Define to 1 or 0, depending whether the compiler supports simple visibility
    declarations. */
 #define HAVE_VISIBILITY 0
 
-/* Define to 1 if the system has the type '_Bool'. */
+/* Define to 1 if the system has the type `_Bool'. */
 #define HAVE__BOOL 1
 
-/* Define to 1 if the GNU C extension __builtin_assume_aligned is supported.
-   */
-#define HAVE___BUILTIN_ASSUME_ALIGNED 1
-
-/* Define to 1 if the GNU C extensions __builtin_bswap16/32/64 are supported.
-   */
-#define HAVE___BUILTIN_BSWAPXX 1
-
 /* Define to 1 to disable debugging code. */
 #define NDEBUG 1
 
 /* Define to the address where bug reports for this package should be sent. */
-#define PACKAGE_BUGREPORT "xz@tukaani.org"
+#define PACKAGE_BUGREPORT "lasse.collin@tukaani.org"
 
 /* Define to the full name of this package. */
 #define PACKAGE_NAME "XZ Utils"
 
 /* Define to the home page for this package. */
-#define PACKAGE_URL "https://xz.tukaani.org/xz-utils/"
+#define PACKAGE_URL "http://tukaani.org/xz/"
 
-/* The size of 'size_t', as computed by sizeof. */
+/* The size of `size_t', as computed by sizeof. */
 #define SIZEOF_SIZE_T 4
 
 /* Define to 1 if the system supports fast unaligned access to 16-bit and

doxygen/footer.html

@@ -1,13 +0,0 @@
-<hr class="footer"/>
-
-<p style="text-align: right;padding-right: 12px;">
-	XZ logo &copy; 2023 by Jia Tan is licensed under
-	<a href="COPYING.CC-BY-SA-4.0"
-	   rel="license"
-	   style="display:inline-block;">
-		CC BY-SA 4.0
-	</a>
-</p>
-
-</body>
-</html>

doxygen/update-doxygen

@@ -1,109 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: 0BSD
-
-#############################################################################
-#
-# Updates the Doxygen generated documentation files in the source tree.
-# If the doxygen command is not installed, it will exit with an error.
-# This script can generate Doxygen documentation for all source files or for
-# just liblzma API header files.
-#
-# It is recommended to use this script to update the Doxygen-generated HTML
-# files since this will include the package version in the output and,
-# in case of liblzma API docs, strip JavaScript files from the output.
-#
-#############################################################################
-#
-# Authors: Jia Tan
-#          Lasse Collin
-#
-#############################################################################
-
-set -e
-
-if type doxygen > /dev/null 2>&1; then
-	:
-else
-	echo "doxygen/update-doxygen: 'doxygen' command not found." >&2
-	echo "doxygen/update-doxygen: Skipping Doxygen docs generation." >&2
-	exit 1
-fi
-
-if test ! -f Doxyfile; then
-	cd `dirname "$0"` || exit 1
-	if test ! -f Doxyfile; then
-		echo "doxygen/update-doxygen: Cannot find Doxyfile" >&2
-		exit 1
-	fi
-fi
-
-# Get the package version so that it can be included in the generated docs.
-PACKAGE_VERSION=`cd .. && sh build-aux/version.sh` || exit 1
-
-# If no arguments are specified, default to generating liblzma API header
-# documentation only.
-case $1 in
-	'' | api)
-		# Remove old documentation before re-generating the new.
-		rm -rf ../doc/api
-
-		# Generate the HTML documentation by preparing the Doxyfile
-		# in stdin and piping the result to the doxygen command.
-		# With Doxygen, the last assignment of a value to a tag will
-		# override any earlier assignment. So, we can use this
-		# feature to override the tags that need to change between
-		# "api" and "internal" modes.
-		(
-			cat Doxyfile
-			echo "PROJECT_NUMBER         = $PACKAGE_VERSION"
-		) | doxygen -
-
-		# As of Doxygen 1.8.0 - 1.9.6 and the Doxyfile options we use,
-		# the output is good without any JavaScript. Unfortunately
-		# Doxygen doesn't have an option to disable JavaScript usage
-		# completely so we strip it away with the hack below.
-		#
-		# Omitting the JavaScript code avoids some license hassle
-		# as jquery.js is fairly big, it contains more than jQuery
-		# itself, and doesn't include the actual license text (it
-		# only refers to the MIT license by name).
-		echo "Stripping JavaScript from Doxygen output..."
-		for F in ../doc/api/*.html
-		do
-			sed 's/<script [^>]*><\/script>//g
-				s/onclick="[^"]*"//g' \
-				"$F" > ../doc/api/tmp
-			mv -f ../doc/api/tmp "$F"
-		done
-		rm -f ../doc/api/*.js
-		;;
-
-	internal)
-		# The docs from internal aren't for distribution so
-		# the JavaScript files aren't an issue here.
-		rm -rf ../doc/internal
-		(
-			cat Doxyfile
-			echo "PROJECT_NUMBER         = $PACKAGE_VERSION"
-			echo 'PROJECT_NAME           = "XZ Utils"'
-			echo 'STRIP_FROM_PATH        = ../src'
-			echo 'INPUT                  = ../src'
-			echo 'HTML_OUTPUT            = internal'
-			echo 'EXTRACT_PRIVATE        = YES'
-			echo 'EXTRACT_STATIC         = YES'
-			echo 'EXTRACT_LOCAL_CLASSES  = YES'
-			echo 'SEARCHENGINE           = YES'
-		) | doxygen -
-		;;
-
-	*)
-		echo "doxygen/update-doxygen: Error: mode argument '$1'" \
-			"is not supported." >&2
-		echo "doxygen/update-doxygen: Supported modes:" >&2
-		echo "doxygen/update-doxygen: - 'api' (default):" \
-			"liblzma API docs into doc/api" >&2
-		echo "doxygen/update-doxygen: - 'internal':"\
-			"internal docs into doc/internal" >&2
-		exit 1
-		;;
-esac

extra/7z2lzma/7z2lzma.bash

@@ -1,6 +1,5 @@
 #!/bin/bash
-# SPDX-License-Identifier: 0BSD
+#
-
 #############################################################################
 #
 # 7z2lzma.bash is very primitive .7z to .lzma converter. The input file must
@@ -18,6 +17,9 @@
 #
 # Author: Lasse Collin <lasse.collin@tukaani.org>
 #
+# This file has been put into the public domain.
+# You can do whatever you want with this file.
+#
 #############################################################################
 
 # You can use 7z or 7za, both will work.

extra/scanlzma/scanlzma.c

@@ -1,5 +1,3 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-
 /*
     scanlzma, scan for lzma compressed data in stdin and echo it to stdout.
     Copyright (C) 2006 Timo Lindfors
@@ -39,10 +37,6 @@
 /*   5     8   Uncompressed size (little endian). -1 means unknown size */
 /*  13         Compressed data */
 
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
 #define BUFSIZE 4096
 
 int find_lzma_header(unsigned char *buf) {
@@ -54,7 +48,7 @@ int find_lzma_header(unsigned char *buf) {
 }
 
 int main(int argc, char *argv[]) {
-	unsigned char buf[BUFSIZE];
+	char buf[BUFSIZE];
 	int ret, i, numlzma, blocks=0;
 
 	if (argc != 2) {

lib/Makefile.am

@@ -1,5 +1,3 @@
-## SPDX-License-Identifier: GPL-2.0-or-later
-
 ##
 ## Copyright (C) 2004-2007 Free Software Foundation, Inc.
 ##
@@ -23,17 +21,7 @@ libgnu_a_SOURCES =
 libgnu_a_DEPENDENCIES = $(LIBOBJS)
 libgnu_a_LIBADD = $(LIBOBJS)
 
-EXTRA_DIST = \
+EXTRA_DIST = getopt.in.h getopt.c getopt1.c getopt_int.h
-	getopt.in.h \
-	getopt.c \
-	getopt1.c \
-	getopt_int.h \
-	getopt-cdefs.h \
-	getopt-core.h \
-	getopt-ext.h \
-	getopt-pfx-core.h \
-	getopt-pfx-ext.h
-
 BUILT_SOURCES = $(GETOPT_H)
 MOSTLYCLEANFILES = getopt.h getopt.h-t
 

lib/getopt-cdefs.h

@@ -1,72 +0,0 @@
-/* SPDX-License-Identifier: LGPL-2.1-or-later */
-
-/* getopt-on-non-glibc compatibility macros.
-   Copyright (C) 1989-2023 Free Software Foundation, Inc.
-   This file is part of gnulib.
-   Unlike most of the getopt implementation, it is NOT shared
-   with the GNU C Library.
-
-   This file is free software: you can redistribute it and/or modify
-   it under the terms of the GNU Lesser General Public License as
-   published by the Free Software Foundation; either version 2.1 of the
-   License, or (at your option) any later version.
-
-   This file is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public License
-   along with this program.  If not, see <https://www.gnu.org/licenses/>.  */
-
-#ifndef _GETOPT_CDEFS_H
-#define _GETOPT_CDEFS_H 1
-
-/* This header should not be used directly; include getopt.h or
-   unistd.h instead.  It does not have a protective #error, because
-   the guard macro for getopt.h in gnulib is not fixed.  */
-
-/* getopt-core.h and getopt-ext.h are shared with GNU libc, and expect
-   a number of the internal macros supplied to GNU libc's headers by
-   sys/cdefs.h.  Provide fallback definitions for all of them.  */
-#ifdef HAVE_SYS_CDEFS_H
-# include <sys/cdefs.h>
-#endif
-
-#ifndef __BEGIN_DECLS
-# ifdef __cplusplus
-#  define __BEGIN_DECLS extern "C" {
-# else
-#  define __BEGIN_DECLS /* nothing */
-# endif
-#endif
-#ifndef __END_DECLS
-# ifdef __cplusplus
-#  define __END_DECLS }
-# else
-#  define __END_DECLS /* nothing */
-# endif
-#endif
-
-#ifndef __GNUC_PREREQ
-# if defined __GNUC__ && defined __GNUC_VERSION__
-# define __GNUC_PREREQ(maj, min) \
-        ((__GNUC__ << 16) + __GNUC_MINOR__ >= ((maj) << 16) + (min))
-# else
-#  define __GNUC_PREREQ(maj, min) 0
-# endif
-#endif
-
-#ifndef __THROW
-# if defined __cplusplus && (__GNUC_PREREQ (2,8) || __clang_major__ >= 4)
-#  if __cplusplus >= 201103L
-#   define __THROW      noexcept (true)
-#  else
-#   define __THROW      throw ()
-#  endif
-# else
-#  define __THROW
-# endif
-#endif
-
-#endif /* _GETOPT_CDEFS_H */

lib/getopt-core.h

@@ -1,98 +0,0 @@
-/* SPDX-License-Identifier: LGPL-2.1-or-later */
-
-/* Declarations for getopt (basic, portable features only).
-   Copyright (C) 1989-2023 Free Software Foundation, Inc.
-   This file is part of the GNU C Library and is also part of gnulib.
-   Patches to this file should be submitted to both projects.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, see
-   <https://www.gnu.org/licenses/>.  */
-
-#ifndef _GETOPT_CORE_H
-#define _GETOPT_CORE_H 1
-
-/* This header should not be used directly; include getopt.h or
-   unistd.h instead.  Unlike most bits headers, it does not have
-   a protective #error, because the guard macro for getopt.h in
-   gnulib is not fixed.  */
-
-__BEGIN_DECLS
-
-/* For communication from 'getopt' to the caller.
-   When 'getopt' finds an option that takes an argument,
-   the argument value is returned here.
-   Also, when 'ordering' is RETURN_IN_ORDER,
-   each non-option ARGV-element is returned here.  */
-
-extern char *optarg;
-
-/* Index in ARGV of the next element to be scanned.
-   This is used for communication to and from the caller
-   and for communication between successive calls to 'getopt'.
-
-   On entry to 'getopt', zero means this is the first call; initialize.
-
-   When 'getopt' returns -1, this is the index of the first of the
-   non-option elements that the caller should itself scan.
-
-   Otherwise, 'optind' communicates from one call to the next
-   how much of ARGV has been scanned so far.  */
-
-extern int optind;
-
-/* Callers store zero here to inhibit the error message 'getopt' prints
-   for unrecognized options.  */
-
-extern int opterr;
-
-/* Set to an option character which was unrecognized.  */
-
-extern int optopt;
-
-/* Get definitions and prototypes for functions to process the
-   arguments in ARGV (ARGC of them, minus the program name) for
-   options given in OPTS.
-
-   Return the option character from OPTS just read.  Return -1 when
-   there are no more options.  For unrecognized options, or options
-   missing arguments, 'optopt' is set to the option letter, and '?' is
-   returned.
-
-   The OPTS string is a list of characters which are recognized option
-   letters, optionally followed by colons, specifying that that letter
-   takes an argument, to be placed in 'optarg'.
-
-   If a letter in OPTS is followed by two colons, its argument is
-   optional.  This behavior is specific to the GNU 'getopt'.
-
-   The argument '--' causes premature termination of argument
-   scanning, explicitly telling 'getopt' that there are no more
-   options.
-
-   If OPTS begins with '-', then non-option arguments are treated as
-   arguments to the option '\1'.  This behavior is specific to the GNU
-   'getopt'.  If OPTS begins with '+', or POSIXLY_CORRECT is set in
-   the environment, then do not permute arguments.
-
-   For standards compliance, the 'argv' argument has the type
-   char *const *, but this is inaccurate; if argument permutation is
-   enabled, the argv array (not the strings it points to) must be
-   writable.  */
-
-extern int getopt (int ___argc, char *const *___argv, const char *__shortopts)
-       __THROW _GL_ARG_NONNULL ((2, 3));
-
-__END_DECLS
-
-#endif /* _GETOPT_CORE_H */

lib/getopt-ext.h

@@ -1,79 +0,0 @@
-/* SPDX-License-Identifier: LGPL-2.1-or-later */
-
-/* Declarations for getopt (GNU extensions).
-   Copyright (C) 1989-2023 Free Software Foundation, Inc.
-   This file is part of the GNU C Library and is also part of gnulib.
-   Patches to this file should be submitted to both projects.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, see
-   <https://www.gnu.org/licenses/>.  */
-
-#ifndef _GETOPT_EXT_H
-#define _GETOPT_EXT_H 1
-
-/* This header should not be used directly; include getopt.h instead.
-   Unlike most bits headers, it does not have a protective #error,
-   because the guard macro for getopt.h in gnulib is not fixed.  */
-
-__BEGIN_DECLS
-
-/* Describe the long-named options requested by the application.
-   The LONG_OPTIONS argument to getopt_long or getopt_long_only is a vector
-   of 'struct option' terminated by an element containing a name which is
-   zero.
-
-   The field 'has_arg' is:
-   no_argument		(or 0) if the option does not take an argument,
-   required_argument	(or 1) if the option requires an argument,
-   optional_argument 	(or 2) if the option takes an optional argument.
-
-   If the field 'flag' is not NULL, it points to a variable that is set
-   to the value given in the field 'val' when the option is found, but
-   left unchanged if the option is not found.
-
-   To have a long-named option do something other than set an 'int' to
-   a compiled-in constant, such as set a value from 'optarg', set the
-   option's 'flag' field to zero and its 'val' field to a nonzero
-   value (the equivalent single-letter option character, if there is
-   one).  For long options that have a zero 'flag' field, 'getopt'
-   returns the contents of the 'val' field.  */
-
-struct option
-{
-  const char *name;
-  /* has_arg can't be an enum because some compilers complain about
-     type mismatches in all the code that assumes it is an int.  */
-  int has_arg;
-  int *flag;
-  int val;
-};
-
-/* Names for the values of the 'has_arg' field of 'struct option'.  */
-
-#define no_argument		0
-#define required_argument	1
-#define optional_argument	2
-
-extern int getopt_long (int ___argc, char *__getopt_argv_const *___argv,
-			const char *__shortopts,
-		        const struct option *__longopts, int *__longind)
-       __THROW _GL_ARG_NONNULL ((2, 3));
-extern int getopt_long_only (int ___argc, char *__getopt_argv_const *___argv,
-			     const char *__shortopts,
-		             const struct option *__longopts, int *__longind)
-       __THROW _GL_ARG_NONNULL ((2, 3));
-
-__END_DECLS
-
-#endif /* _GETOPT_EXT_H */

lib/getopt-pfx-core.h

@@ -1,68 +0,0 @@
-/* SPDX-License-Identifier: LGPL-2.1-or-later */
-
-/* getopt (basic, portable features) gnulib wrapper header.
-   Copyright (C) 1989-2023 Free Software Foundation, Inc.
-   This file is part of gnulib.
-   Unlike most of the getopt implementation, it is NOT shared
-   with the GNU C Library.
-
-   This file is free software: you can redistribute it and/or modify
-   it under the terms of the GNU Lesser General Public License as
-   published by the Free Software Foundation; either version 2.1 of the
-   License, or (at your option) any later version.
-
-   This file is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public License
-   along with this program.  If not, see <https://www.gnu.org/licenses/>.  */
-
-#ifndef _GETOPT_PFX_CORE_H
-#define _GETOPT_PFX_CORE_H 1
-
-/* This header should not be used directly; include getopt.h or
-   unistd.h instead.  It does not have a protective #error, because
-   the guard macro for getopt.h in gnulib is not fixed.  */
-
-/* Standalone applications should #define __GETOPT_PREFIX to an
-   identifier that prefixes the external functions and variables
-   defined in getopt-core.h and getopt-ext.h.  Systematically
-   rename identifiers so that they do not collide with the system
-   functions and variables.  Renaming avoids problems with some
-   compilers and linkers.  */
-#ifdef __GETOPT_PREFIX
-# ifndef __GETOPT_ID
-#  define __GETOPT_CONCAT(x, y) x ## y
-#  define __GETOPT_XCONCAT(x, y) __GETOPT_CONCAT (x, y)
-#  define __GETOPT_ID(y) __GETOPT_XCONCAT (__GETOPT_PREFIX, y)
-# endif
-# undef getopt
-# undef optarg
-# undef opterr
-# undef optind
-# undef optopt
-# define getopt __GETOPT_ID (getopt)
-# define optarg __GETOPT_ID (optarg)
-# define opterr __GETOPT_ID (opterr)
-# define optind __GETOPT_ID (optind)
-# define optopt __GETOPT_ID (optopt)
-
-/* Work around a problem on macOS, which declares getopt with a
-   trailing __DARWIN_ALIAS(getopt) that would expand to something like
-   __asm("_" "rpl_getopt" "$UNIX2003") were it not for the following
-   hack to suppress the macOS declaration <https://bugs.gnu.org/40205>.  */
-# ifdef __APPLE__
-#  define _GETOPT
-# endif
-
-/* The system's getopt.h may have already included getopt-core.h to
-   declare the unprefixed identifiers.  Undef _GETOPT_CORE_H so that
-   getopt-core.h declares them with prefixes.  */
-# undef _GETOPT_CORE_H
-#endif
-
-#include <getopt-core.h>
-
-#endif /* _GETOPT_PFX_CORE_H */

lib/getopt-pfx-ext.h

@@ -1,72 +0,0 @@
-/* SPDX-License-Identifier: LGPL-2.1-or-later */
-
-/* getopt (GNU extensions) gnulib wrapper header.
-   Copyright (C) 1989-2023 Free Software Foundation, Inc.
-   This file is part of gnulib.
-   Unlike most of the getopt implementation, it is NOT shared
-   with the GNU C Library.
-
-   This file is free software: you can redistribute it and/or modify
-   it under the terms of the GNU Lesser General Public License as
-   published by the Free Software Foundation; either version 2.1 of the
-   License, or (at your option) any later version.
-
-   This file is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public License
-   along with this program.  If not, see <https://www.gnu.org/licenses/>.  */
-
-#ifndef _GETOPT_PFX_EXT_H
-#define _GETOPT_PFX_EXT_H 1
-
-/* This header should not be used directly; include getopt.h instead.
-   It does not have a protective #error, because the guard macro for
-   getopt.h in gnulib is not fixed.  */
-
-/* Standalone applications should #define __GETOPT_PREFIX to an
-   identifier that prefixes the external functions and variables
-   defined in getopt-core.h and getopt-ext.h.  Systematically
-   rename identifiers so that they do not collide with the system
-   functions and variables.  Renaming avoids problems with some
-   compilers and linkers.  */
-#ifdef __GETOPT_PREFIX
-# ifndef __GETOPT_ID
-#  define __GETOPT_CONCAT(x, y) x ## y
-#  define __GETOPT_XCONCAT(x, y) __GETOPT_CONCAT (x, y)
-#  define __GETOPT_ID(y) __GETOPT_XCONCAT (__GETOPT_PREFIX, y)
-# endif
-# undef getopt_long
-# undef getopt_long_only
-# undef option
-# undef _getopt_internal
-# define getopt_long __GETOPT_ID (getopt_long)
-# define getopt_long_only __GETOPT_ID (getopt_long_only)
-# define option __GETOPT_ID (option)
-# define _getopt_internal __GETOPT_ID (getopt_internal)
-
-/* The system's getopt.h may have already included getopt-ext.h to
-   declare the unprefixed identifiers.  Undef _GETOPT_EXT_H so that
-   getopt-ext.h declares them with prefixes.  */
-# undef _GETOPT_EXT_H
-#endif
-
-/* Standalone applications get correct prototypes for getopt_long and
-   getopt_long_only; they declare "char **argv".  For backward
-   compatibility with old applications, if __GETOPT_PREFIX is not
-   defined, we supply GNU-libc-compatible, but incorrect, prototypes
-   using "char *const *argv".  (GNU libc is stuck with the incorrect
-   prototypes, as they are baked into older versions of LSB.)  */
-#ifndef __getopt_argv_const
-# if defined __GETOPT_PREFIX
-#  define __getopt_argv_const /* empty */
-# else
-#  define __getopt_argv_const const
-# endif
-#endif
-
-#include <getopt-ext.h>
-
-#endif /* _GETOPT_PFX_EXT_H */

lib/getopt.in.h

@@ -1,28 +1,27 @@
-/* SPDX-License-Identifier: LGPL-2.1-or-later */
-
 /* Declarations for getopt.
-   Copyright (C) 1989-2023 Free Software Foundation, Inc.
+   Copyright (C) 1989-1994,1996-1999,2001,2003,2004,2005,2006,2007
-   This file is part of gnulib.
+   Free Software Foundation, Inc.
-   Unlike most of the getopt implementation, it is NOT shared
+   This file is part of the GNU C Library.
-   with the GNU C Library, which supplies a different version of
-   this file.
 
-   This file is free software: you can redistribute it and/or modify
+   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU Lesser General Public License as
+   it under the terms of the GNU Lesser General Public License as published by
-   published by the Free Software Foundation; either version 2.1 of the
+   the Free Software Foundation; either version 2.1, or (at your option)
-   License, or (at your option) any later version.
+   any later version.
 
-   This file is distributed in the hope that it will be useful,
+   This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU Lesser General Public License for more details.
 
-   You should have received a copy of the GNU Lesser General Public License
+   You should have received a copy of the GNU Lesser General Public License along
-   along with this program.  If not, see <https://www.gnu.org/licenses/>.  */
+   with this program; if not, write to the Free Software Foundation,
+   Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 #ifndef _GETOPT_H
 
-#define _GETOPT_H 1
+#ifndef __need_getopt
+# define _GETOPT_H 1
+#endif
 
 /* Standalone applications should #define __GETOPT_PREFIX to an
    identifier that prefixes the external functions and variables
@@ -32,29 +31,196 @@
    identifiers so that they do not collide with the system functions
    and variables.  Renaming avoids problems with some compilers and
    linkers.  */
-#if defined __GETOPT_PREFIX
+#if defined __GETOPT_PREFIX && !defined __need_getopt
 # include <stdlib.h>
 # include <stdio.h>
-
+# include <unistd.h>
-# ifndef _MSC_VER
+# undef __need_getopt
-#  include <unistd.h>
+# undef getopt
-# endif
+# undef getopt_long
+# undef getopt_long_only
+# undef optarg
+# undef opterr
+# undef optind
+# undef optopt
+# define __GETOPT_CONCAT(x, y) x ## y
+# define __GETOPT_XCONCAT(x, y) __GETOPT_CONCAT (x, y)
+# define __GETOPT_ID(y) __GETOPT_XCONCAT (__GETOPT_PREFIX, y)
+# define getopt __GETOPT_ID (getopt)
+# define getopt_long __GETOPT_ID (getopt_long)
+# define getopt_long_only __GETOPT_ID (getopt_long_only)
+# define optarg __GETOPT_ID (optarg)
+# define opterr __GETOPT_ID (opterr)
+# define optind __GETOPT_ID (optind)
+# define optopt __GETOPT_ID (optopt)
 #endif
 
-/* From Gnulib's lib/arg-nonnull.h: */
+/* Standalone applications get correct prototypes for getopt_long and
-/* _GL_ARG_NONNULL((n,...,m)) tells the compiler and static analyzer tools
+   getopt_long_only; they declare "char **argv".  libc uses prototypes
-   that the values passed as arguments n, ..., m must be non-NULL pointers.
+   with "char *const *argv" that are incorrect because getopt_long and
-   n = 1 stands for the first argument, n = 2 for the second argument etc.  */
+   getopt_long_only can permute argv; this is required for backward
-#ifndef _GL_ARG_NONNULL
+   compatibility (e.g., for LSB 2.0.1).
-# if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 3) || defined __clang__
+
-#  define _GL_ARG_NONNULL(params) __attribute__ ((__nonnull__ params))
+   This used to be `#if defined __GETOPT_PREFIX && !defined __need_getopt',
+   but it caused redefinition warnings if both unistd.h and getopt.h were
+   included, since unistd.h includes getopt.h having previously defined
+   __need_getopt.
+
+   The only place where __getopt_argv_const is used is in definitions
+   of getopt_long and getopt_long_only below, but these are visible
+   only if __need_getopt is not defined, so it is quite safe to rewrite
+   the conditional as follows:
+*/
+#if !defined __need_getopt
+# if defined __GETOPT_PREFIX
+#  define __getopt_argv_const /* empty */
 # else
-#  define _GL_ARG_NONNULL(params)
+#  define __getopt_argv_const const
 # endif
 #endif
 
-#include <getopt-cdefs.h>
+/* If __GNU_LIBRARY__ is not already defined, either we are being used
-#include <getopt-pfx-core.h>
+   standalone, or this is the first header included in the source file.
-#include <getopt-pfx-ext.h>
+   If we are being used with glibc, we need to include <features.h>, but
+   that does not exist if we are standalone.  So: if __GNU_LIBRARY__ is
+   not defined, include <ctype.h>, which will pull in <features.h> for us
+   if it's from glibc.  (Why ctype.h?  It's guaranteed to exist and it
+   doesn't flood the namespace with stuff the way some other headers do.)  */
+#if !defined __GNU_LIBRARY__
+# include <ctype.h>
+#endif
 
-#endif /* _GETOPT_H */
+#ifndef __THROW
+# ifndef __GNUC_PREREQ
+#  define __GNUC_PREREQ(maj, min) (0)
+# endif
+# if defined __cplusplus && __GNUC_PREREQ (2,8)
+#  define __THROW	throw ()
+# else
+#  define __THROW
+# endif
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* For communication from `getopt' to the caller.
+   When `getopt' finds an option that takes an argument,
+   the argument value is returned here.
+   Also, when `ordering' is RETURN_IN_ORDER,
+   each non-option ARGV-element is returned here.  */
+
+extern char *optarg;
+
+/* Index in ARGV of the next element to be scanned.
+   This is used for communication to and from the caller
+   and for communication between successive calls to `getopt'.
+
+   On entry to `getopt', zero means this is the first call; initialize.
+
+   When `getopt' returns -1, this is the index of the first of the
+   non-option elements that the caller should itself scan.
+
+   Otherwise, `optind' communicates from one call to the next
+   how much of ARGV has been scanned so far.  */
+
+extern int optind;
+
+/* Callers store zero here to inhibit the error message `getopt' prints
+   for unrecognized options.  */
+
+extern int opterr;
+
+/* Set to an option character which was unrecognized.  */
+
+extern int optopt;
+
+#ifndef __need_getopt
+/* Describe the long-named options requested by the application.
+   The LONG_OPTIONS argument to getopt_long or getopt_long_only is a vector
+   of `struct option' terminated by an element containing a name which is
+   zero.
+
+   The field `has_arg' is:
+   no_argument		(or 0) if the option does not take an argument,
+   required_argument	(or 1) if the option requires an argument,
+   optional_argument	(or 2) if the option takes an optional argument.
+
+   If the field `flag' is not NULL, it points to a variable that is set
+   to the value given in the field `val' when the option is found, but
+   left unchanged if the option is not found.
+
+   To have a long-named option do something other than set an `int' to
+   a compiled-in constant, such as set a value from `optarg', set the
+   option's `flag' field to zero and its `val' field to a nonzero
+   value (the equivalent single-letter option character, if there is
+   one).  For long options that have a zero `flag' field, `getopt'
+   returns the contents of the `val' field.  */
+
+struct option
+{
+  const char *name;
+  /* has_arg can't be an enum because some compilers complain about
+     type mismatches in all the code that assumes it is an int.  */
+  int has_arg;
+  int *flag;
+  int val;
+};
+
+/* Names for the values of the `has_arg' field of `struct option'.  */
+
+# define no_argument		0
+# define required_argument	1
+# define optional_argument	2
+#endif	/* need getopt */
+
+
+/* Get definitions and prototypes for functions to process the
+   arguments in ARGV (ARGC of them, minus the program name) for
+   options given in OPTS.
+
+   Return the option character from OPTS just read.  Return -1 when
+   there are no more options.  For unrecognized options, or options
+   missing arguments, `optopt' is set to the option letter, and '?' is
+   returned.
+
+   The OPTS string is a list of characters which are recognized option
+   letters, optionally followed by colons, specifying that that letter
+   takes an argument, to be placed in `optarg'.
+
+   If a letter in OPTS is followed by two colons, its argument is
+   optional.  This behavior is specific to the GNU `getopt'.
+
+   The argument `--' causes premature termination of argument
+   scanning, explicitly telling `getopt' that there are no more
+   options.
+
+   If OPTS begins with `-', then non-option arguments are treated as
+   arguments to the option '\1'.  This behavior is specific to the GNU
+   `getopt'.  If OPTS begins with `+', or POSIXLY_CORRECT is set in
+   the environment, then do not permute arguments.  */
+
+extern int getopt (int ___argc, char *const *___argv, const char *__shortopts)
+       __THROW;
+
+#ifndef __need_getopt
+extern int getopt_long (int ___argc, char *__getopt_argv_const *___argv,
+			const char *__shortopts,
+		        const struct option *__longopts, int *__longind)
+       __THROW;
+extern int getopt_long_only (int ___argc, char *__getopt_argv_const *___argv,
+			     const char *__shortopts,
+		             const struct option *__longopts, int *__longind)
+       __THROW;
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+/* Make sure we later can get all the definitions and declarations.  */
+#undef __need_getopt
+
+#endif /* getopt.h */

lib/getopt1.c

@@ -1,32 +1,41 @@
-/* SPDX-License-Identifier: LGPL-2.1-or-later */
-
 /* getopt_long and getopt_long_only entry points for GNU getopt.
-   Copyright (C) 1987-2023 Free Software Foundation, Inc.
+   Copyright (C) 1987,88,89,90,91,92,93,94,96,97,98,2004,2006
-   This file is part of the GNU C Library and is also part of gnulib.
+     Free Software Foundation, Inc.
-   Patches to this file should be submitted to both projects.
+   This file is part of the GNU C Library.
 
-   The GNU C Library is free software; you can redistribute it and/or
+   This program is free software; you can redistribute it and/or modify
-   modify it under the terms of the GNU Lesser General Public
+   it under the terms of the GNU Lesser General Public License as published by
-   License as published by the Free Software Foundation; either
+   the Free Software Foundation; either version 2.1, or (at your option)
-   version 2.1 of the License, or (at your option) any later version.
+   any later version.
 
-   The GNU C Library is distributed in the hope that it will be useful,
+   This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   Lesser General Public License for more details.
+   GNU Lesser General Public License for more details.
 
-   You should have received a copy of the GNU Lesser General Public
+   You should have received a copy of the GNU Lesser General Public License along
-   License along with the GNU C Library; if not, see
+   with this program; if not, write to the Free Software Foundation,
-   <https://www.gnu.org/licenses/>.  */
+   Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
-#ifndef _LIBC
+#ifdef _LIBC
-# ifdef HAVE_CONFIG_H
+# include <getopt.h>
-#  include <config.h>
+#else
-# endif
+# include <config.h>
+# include "getopt.h"
+#endif
+#include "getopt_int.h"
+
+#include <stdio.h>
+
+/* This needs to come after some library #include
+   to get __GNU_LIBRARY__ defined.  */
+#ifdef __GNU_LIBRARY__
+#include <stdlib.h>
 #endif
 
-#include "getopt.h"
+#ifndef	NULL
-#include "getopt_int.h"
+#define NULL 0
+#endif
 
 int
 getopt_long (int argc, char *__getopt_argv_const *argv, const char *options,
@@ -42,7 +51,7 @@ _getopt_long_r (int argc, char **argv, const char *options,
 		struct _getopt_data *d)
 {
   return _getopt_internal_r (argc, argv, options, long_options, opt_index,
-			     0, d, 0);
+			     0, 0, d);
 }
 
 /* Like getopt_long, but '-' as well as '--' can indicate a long option.
@@ -65,14 +74,13 @@ _getopt_long_only_r (int argc, char **argv, const char *options,
 		     struct _getopt_data *d)
 {
   return _getopt_internal_r (argc, argv, options, long_options, opt_index,
-			     1, d, 0);
+			     1, 0, d);
 }
 
 
 #ifdef TEST
 
 #include <stdio.h>
-#include <stdlib.h>
 
 int
 main (int argc, char **argv)
@@ -84,7 +92,7 @@ main (int argc, char **argv)
     {
       int this_option_optind = optind ? optind : 1;
       int option_index = 0;
-      static const struct option long_options[] =
+      static struct option long_options[] =
       {
 	{"add", 1, 0, 0},
 	{"append", 0, 0, 0},
@@ -134,11 +142,11 @@ main (int argc, char **argv)
 	  break;
 
 	case 'c':
-	  printf ("option c with value '%s'\n", optarg);
+	  printf ("option c with value `%s'\n", optarg);
 	  break;
 
 	case 'd':
-	  printf ("option d with value '%s'\n", optarg);
+	  printf ("option d with value `%s'\n", optarg);
 	  break;
 
 	case '?':

lib/getopt_int.h

@@ -1,64 +1,34 @@
-/* SPDX-License-Identifier: LGPL-2.1-or-later */
-
 /* Internal declarations for getopt.
-   Copyright (C) 1989-2023 Free Software Foundation, Inc.
+   Copyright (C) 1989-1994,1996-1999,2001,2003,2004
-   This file is part of the GNU C Library and is also part of gnulib.
+   Free Software Foundation, Inc.
-   Patches to this file should be submitted to both projects.
+   This file is part of the GNU C Library.
 
-   The GNU C Library is free software; you can redistribute it and/or
+   This program is free software; you can redistribute it and/or modify
-   modify it under the terms of the GNU Lesser General Public
+   it under the terms of the GNU General Public License as published by
-   License as published by the Free Software Foundation; either
+   the Free Software Foundation; either version 2, or (at your option)
-   version 2.1 of the License, or (at your option) any later version.
+   any later version.
 
-   The GNU C Library is distributed in the hope that it will be useful,
+   This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   Lesser General Public License for more details.
+   GNU General Public License for more details.
 
-   You should have received a copy of the GNU Lesser General Public
+   You should have received a copy of the GNU General Public License along
-   License along with the GNU C Library; if not, see
+   with this program; if not, write to the Free Software Foundation,
-   <https://www.gnu.org/licenses/>.  */
+   Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
 
 #ifndef _GETOPT_INT_H
 #define _GETOPT_INT_H	1
 
-#include <getopt.h>
-
 extern int _getopt_internal (int ___argc, char **___argv,
 			     const char *__shortopts,
-			     const struct option *__longopts, int *__longind,
+		             const struct option *__longopts, int *__longind,
 			     int __long_only, int __posixly_correct);
 
 
 /* Reentrant versions which can handle parsing multiple argument
    vectors at the same time.  */
 
-/* Describe how to deal with options that follow non-option ARGV-elements.
-
-   REQUIRE_ORDER means don't recognize them as options; stop option
-   processing when the first non-option is seen.  This is what POSIX
-   specifies should happen.
-
-   PERMUTE means permute the contents of ARGV as we scan, so that
-   eventually all the non-options are at the end.  This allows options
-   to be given in any order, even with programs that were not written
-   to expect this.
-
-   RETURN_IN_ORDER is an option available to programs that were
-   written to expect options and other ARGV-elements in any order
-   and that care about the ordering of the two.  We describe each
-   non-option ARGV-element as if it were the argument of an option
-   with character code 1.
-
-   The special argument '--' forces an end of option-scanning regardless
-   of the value of 'ordering'.  In the case of RETURN_IN_ORDER, only
-   '--' can cause 'getopt' to return -1 with 'optind' != ARGC.  */
-
-enum __ord
-  {
-    REQUIRE_ORDER, PERMUTE, RETURN_IN_ORDER
-  };
-
 /* Data type for reentrant functions.  */
 struct _getopt_data
 {
@@ -83,17 +53,58 @@ struct _getopt_data
      by advancing to the next ARGV-element.  */
   char *__nextchar;
 
-  /* See __ord above.  */
+  /* Describe how to deal with options that follow non-option ARGV-elements.
-  enum __ord __ordering;
+
+     If the caller did not specify anything,
+     the default is REQUIRE_ORDER if the environment variable
+     POSIXLY_CORRECT is defined, PERMUTE otherwise.
+
+     REQUIRE_ORDER means don't recognize them as options;
+     stop option processing when the first non-option is seen.
+     This is what Unix does.
+     This mode of operation is selected by either setting the environment
+     variable POSIXLY_CORRECT, or using `+' as the first character
+     of the list of option characters, or by calling getopt.
+
+     PERMUTE is the default.  We permute the contents of ARGV as we
+     scan, so that eventually all the non-options are at the end.
+     This allows options to be given in any order, even with programs
+     that were not written to expect this.
+
+     RETURN_IN_ORDER is an option available to programs that were
+     written to expect options and other ARGV-elements in any order
+     and that care about the ordering of the two.  We describe each
+     non-option ARGV-element as if it were the argument of an option
+     with character code 1.  Using `-' as the first character of the
+     list of option characters selects this mode of operation.
+
+     The special argument `--' forces an end of option-scanning regardless
+     of the value of `ordering'.  In the case of RETURN_IN_ORDER, only
+     `--' can cause `getopt' to return -1 with `optind' != ARGC.  */
+
+  enum
+    {
+      REQUIRE_ORDER, PERMUTE, RETURN_IN_ORDER
+    } __ordering;
+
+  /* If the POSIXLY_CORRECT environment variable is set
+     or getopt was called.  */
+  int __posixly_correct;
+
 
   /* Handle permutation of arguments.  */
 
   /* Describe the part of ARGV that contains non-options that have
-     been skipped.  'first_nonopt' is the index in ARGV of the first
+     been skipped.  `first_nonopt' is the index in ARGV of the first
-     of them; 'last_nonopt' is the index after the last of them.  */
+     of them; `last_nonopt' is the index after the last of them.  */
 
   int __first_nonopt;
   int __last_nonopt;
+
+#if defined _LIBC && defined USE_NONOPTION_FLAGS
+  int __nonoption_flags_max_len;
+  int __nonoption_flags_len;
+# endif
 };
 
 /* The initializer is necessary to set OPTIND and OPTERR to their
@@ -103,8 +114,8 @@ struct _getopt_data
 extern int _getopt_internal_r (int ___argc, char **___argv,
 			       const char *__shortopts,
 			       const struct option *__longopts, int *__longind,
-			       int __long_only, struct _getopt_data *__data,
+			       int __long_only, int __posixly_correct,
-			       int __posixly_correct);
+			       struct _getopt_data *__data);
 
 extern int _getopt_long_r (int ___argc, char **___argv,
 			   const char *__shortopts,

m4/.gitignore

@@ -1,16 +1,11 @@
-build-to-host.m4
 codeset.m4
-extern-inline.m4
-fcntl-o.m4
 gettext.m4
 glibc2.m4
 glibc21.m4
-host-cpu-c-abi.m4
 iconv.m4
 intdiv0.m4
 intl.m4
 intldir.m4
-intlmacosx.m4
 intmax.m4
 inttypes-pri.m4
 inttypes_h.m4
@@ -32,9 +27,9 @@ printf-posix.m4
 progtest.m4
 size_max.m4
 stdint_h.m4
-threadlib.m4
 uintmax_t.m4
 ulonglong.m4
+visibility.m4
 wchar_t.m4
 wint_t.m4
 xsize.m4

m4/ax_pthread.m4

@@ -1,7 +1,5 @@
-dnl SPDX-License-Identifier: GPL-3.0-or-later WITH Autoconf-exception-macro
-
 # ===========================================================================
-#        https://www.gnu.org/software/autoconf-archive/ax_pthread.html
+#        http://www.gnu.org/software/autoconf-archive/ax_pthread.html
 # ===========================================================================
 #
 # SYNOPSIS
@@ -16,28 +14,24 @@ dnl SPDX-License-Identifier: GPL-3.0-or-later WITH Autoconf-exception-macro
 #   flags that are needed. (The user can also force certain compiler
 #   flags/libs to be tested by setting these environment variables.)
 #
-#   Also sets PTHREAD_CC and PTHREAD_CXX to any special C compiler that is
+#   Also sets PTHREAD_CC to any special C compiler that is needed for
-#   needed for multi-threaded programs (defaults to the value of CC
+#   multi-threaded programs (defaults to the value of CC otherwise). (This
-#   respectively CXX otherwise). (This is necessary on e.g. AIX to use the
+#   is necessary on AIX to use the special cc_r compiler alias.)
-#   special cc_r/CC_r compiler alias.)
 #
 #   NOTE: You are assumed to not only compile your program with these flags,
-#   but also to link with them as well. For example, you might link with
+#   but also link it with them as well. e.g. you should link with
 #   $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS $LIBS
-#   $PTHREAD_CXX $CXXFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS $LIBS
 #
-#   If you are only building threaded programs, you may wish to use these
+#   If you are only building threads programs, you may wish to use these
 #   variables in your default LIBS, CFLAGS, and CC:
 #
 #     LIBS="$PTHREAD_LIBS $LIBS"
 #     CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
-#     CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
 #     CC="$PTHREAD_CC"
-#     CXX="$PTHREAD_CXX"
 #
 #   In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute constant
-#   has a nonstandard name, this macro defines PTHREAD_CREATE_JOINABLE to
+#   has a nonstandard name, defines PTHREAD_CREATE_JOINABLE to that name
-#   that name (e.g. PTHREAD_CREATE_UNDETACHED on AIX).
+#   (e.g. PTHREAD_CREATE_UNDETACHED on AIX).
 #
 #   Also HAVE_PTHREAD_PRIO_INHERIT is defined if pthread is found and the
 #   PTHREAD_PRIO_INHERIT symbol is defined when compiling with
@@ -61,7 +55,6 @@ dnl SPDX-License-Identifier: GPL-3.0-or-later WITH Autoconf-exception-macro
 #
 #   Copyright (c) 2008 Steven G. Johnson <stevenj@alum.mit.edu>
 #   Copyright (c) 2011 Daniel Richard G. <skunk@iSKUNK.ORG>
-#   Copyright (c) 2019 Marc Stevens <marc.stevens@cwi.nl>
 #
 #   This program is free software: you can redistribute it and/or modify it
 #   under the terms of the GNU General Public License as published by the
@@ -74,7 +67,7 @@ dnl SPDX-License-Identifier: GPL-3.0-or-later WITH Autoconf-exception-macro
 #   Public License for more details.
 #
 #   You should have received a copy of the GNU General Public License along
-#   with this program. If not, see <https://www.gnu.org/licenses/>.
+#   with this program. If not, see <http://www.gnu.org/licenses/>.
 #
 #   As a special exception, the respective Autoconf Macro's copyright owner
 #   gives unlimited permission to copy, distribute and modify the configure
@@ -89,41 +82,35 @@ dnl SPDX-License-Identifier: GPL-3.0-or-later WITH Autoconf-exception-macro
 #   modified version of the Autoconf Macro, you may extend this special
 #   exception to the GPL to apply to your modified version as well.
 
-#serial 31
+#serial 21
 
 AU_ALIAS([ACX_PTHREAD], [AX_PTHREAD])
 AC_DEFUN([AX_PTHREAD], [
 AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_CC])
-AC_REQUIRE([AC_PROG_SED])
 AC_LANG_PUSH([C])
 ax_pthread_ok=no
 
 # We used to check for pthread.h first, but this fails if pthread.h
-# requires special compiler flags (e.g. on Tru64 or Sequent).
+# requires special compiler flags (e.g. on True64 or Sequent).
 # It gets checked for in the link test anyway.
 
 # First of all, check if the user has set any of the PTHREAD_LIBS,
 # etcetera environment variables, and if threads linking works using
 # them:
-if test "x$PTHREAD_CFLAGS$PTHREAD_LIBS" != "x"; then
+if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then
-        ax_pthread_save_CC="$CC"
+        save_CFLAGS="$CFLAGS"
-        ax_pthread_save_CFLAGS="$CFLAGS"
-        ax_pthread_save_LIBS="$LIBS"
-        AS_IF([test "x$PTHREAD_CC" != "x"], [CC="$PTHREAD_CC"])
-        AS_IF([test "x$PTHREAD_CXX" != "x"], [CXX="$PTHREAD_CXX"])
         CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+        save_LIBS="$LIBS"
         LIBS="$PTHREAD_LIBS $LIBS"
-        AC_MSG_CHECKING([for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS])
+        AC_MSG_CHECKING([for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS])
-        AC_LINK_IFELSE([AC_LANG_CALL([], [pthread_join])], [ax_pthread_ok=yes])
+        AC_TRY_LINK_FUNC([pthread_join], [ax_pthread_ok=yes])
         AC_MSG_RESULT([$ax_pthread_ok])
-        if test "x$ax_pthread_ok" = "xno"; then
+        if test x"$ax_pthread_ok" = xno; then
                 PTHREAD_LIBS=""
                 PTHREAD_CFLAGS=""
         fi
-        CC="$ax_pthread_save_CC"
+        LIBS="$save_LIBS"
-        CFLAGS="$ax_pthread_save_CFLAGS"
+        CFLAGS="$save_CFLAGS"
-        LIBS="$ax_pthread_save_LIBS"
 fi
 
 # We must check for the threads library under a number of different
@@ -131,14 +118,12 @@ fi
 # (e.g. DEC) have both -lpthread and -lpthreads, where one of the
 # libraries is broken (non-POSIX).
 
-# Create a list of thread flags to try. Items with a "," contain both
+# Create a list of thread flags to try.  Items starting with a "-" are
-# C compiler flags (before ",") and linker flags (after ","). Other items
+# C compiler flags, and other items are library names, except for "none"
-# starting with a "-" are C compiler flags, and remaining items are
+# which indicates that we try without any flags at all, and "pthread-config"
-# library names, except for "none" which indicates that we try without
+# which is a program returning the flags for the Pth emulation library.
-# any flags at all, and "pthread-config" which is a program returning
-# the flags for the Pth emulation library.
 
-ax_pthread_flags="pthreads none -Kthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
+ax_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
 
 # The ordering *is* (sometimes) important.  Some notes on the
 # individual items follow:
@@ -147,163 +132,82 @@ ax_pthread_flags="pthreads none -Kthread -pthread -pthreads -mthreads pthread --
 # none: in case threads are in libc; should be tried before -Kthread and
 #       other compiler flags to prevent continual compiler warnings
 # -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
-# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads), Tru64
+# -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
-#           (Note: HP C rejects this with "bad form for `-t' option")
+# lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
-# -pthreads: Solaris/gcc (Note: HP C also rejects)
+# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads)
-# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
+# -pthreads: Solaris/gcc
-#      doesn't hurt to check since this sometimes defines pthreads and
-#      -D_REENTRANT too), HP C (must be checked before -lpthread, which
-#      is present but should not be used directly; and before -mthreads,
-#      because the compiler interprets this as "-mt" + "-hreads")
 # -mthreads: Mingw32/gcc, Lynx/gcc
+# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
+#      doesn't hurt to check since this sometimes defines pthreads too;
+#      also defines -D_REENTRANT)
+#      ... -mt is also the pthreads flag for HP/aCC
 # pthread: Linux, etcetera
 # --thread-safe: KAI C++
 # pthread-config: use pthread-config program (for GNU Pth library)
 
-case $host_os in
+case ${host_os} in
-
-        freebsd*)
-
-        # -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
-        # lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
-
-        ax_pthread_flags="-kthread lthread $ax_pthread_flags"
-        ;;
-
-        hpux*)
-
-        # From the cc(1) man page: "[-mt] Sets various -D flags to enable
-        # multi-threading and also sets -lpthread."
-
-        ax_pthread_flags="-mt -pthread pthread $ax_pthread_flags"
-        ;;
-
-        openedition*)
-
-        # IBM z/OS requires a feature-test macro to be defined in order to
-        # enable POSIX threads at all, so give the user a hint if this is
-        # not set. (We don't define these ourselves, as they can affect
-        # other portions of the system API in unpredictable ways.)
-
-        AC_EGREP_CPP([AX_PTHREAD_ZOS_MISSING],
-            [
-#            if !defined(_OPEN_THREADS) && !defined(_UNIX03_THREADS)
-             AX_PTHREAD_ZOS_MISSING
-#            endif
-            ],
-            [AC_MSG_WARN([IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support.])])
-        ;;
-
         solaris*)
 
         # On Solaris (at least, for some versions), libc contains stubbed
         # (non-functional) versions of the pthreads routines, so link-based
-        # tests will erroneously succeed. (N.B.: The stubs are missing
+        # tests will erroneously succeed.  (We need to link with -pthreads/-mt/
-        # pthread_cleanup_push, or rather a function called by this macro,
+        # -lpthread.)  (The stubs are missing pthread_cleanup_push, or rather
-        # so we could check for that, but who knows whether they'll stub
+        # a function called by this macro, so we could check for that, but
-        # that too in a future libc.)  So we'll check first for the
+        # who knows whether they'll stub that too in a future libc.)  So,
-        # standard Solaris way of linking pthreads (-mt -lpthread).
+        # we'll just look for -pthreads and -lpthread first:
 
-        ax_pthread_flags="-mt,-lpthread pthread $ax_pthread_flags"
+        ax_pthread_flags="-pthreads pthread -mt -pthread $ax_pthread_flags"
+        ;;
+
+        darwin*)
+        ax_pthread_flags="-pthread $ax_pthread_flags"
         ;;
 esac
 
-# Are we compiling with Clang?
+# Clang doesn't consider unrecognized options an error unless we specify
+# -Werror. We throw in some extra Clang-specific options to ensure that
+# this doesn't happen for GCC, which also accepts -Werror.
 
-AC_CACHE_CHECK([whether $CC is Clang],
+AC_MSG_CHECKING([if compiler needs -Werror to reject unknown flags])
-    [ax_cv_PTHREAD_CLANG],
+save_CFLAGS="$CFLAGS"
-    [ax_cv_PTHREAD_CLANG=no
+ax_pthread_extra_flags="-Werror"
-     # Note that Autoconf sets GCC=yes for Clang as well as GCC
+CFLAGS="$CFLAGS $ax_pthread_extra_flags -Wunknown-warning-option -Wsizeof-array-argument"
-     if test "x$GCC" = "xyes"; then
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM([int foo(void);],[foo()])],
-        AC_EGREP_CPP([AX_PTHREAD_CC_IS_CLANG],
+                  [AC_MSG_RESULT([yes])],
-            [/* Note: Clang 2.7 lacks __clang_[a-z]+__ */
+                  [ax_pthread_extra_flags=
-#            if defined(__clang__) && defined(__llvm__)
+                   AC_MSG_RESULT([no])])
-             AX_PTHREAD_CC_IS_CLANG
+CFLAGS="$save_CFLAGS"
-#            endif
-            ],
-            [ax_cv_PTHREAD_CLANG=yes])
-     fi
-    ])
-ax_pthread_clang="$ax_cv_PTHREAD_CLANG"
 
+if test x"$ax_pthread_ok" = xno; then
+for flag in $ax_pthread_flags; do
 
-# GCC generally uses -pthread, or -pthreads on some platforms (e.g. SPARC)
+        case $flag in
-
-# Note that for GCC and Clang -pthread generally implies -lpthread,
-# except when -nostdlib is passed.
-# This is problematic using libtool to build C++ shared libraries with pthread:
-# [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=25460
-# [2] https://bugzilla.redhat.com/show_bug.cgi?id=661333
-# [3] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=468555
-# To solve this, first try -pthread together with -lpthread for GCC
-
-AS_IF([test "x$GCC" = "xyes"],
-      [ax_pthread_flags="-pthread,-lpthread -pthread -pthreads $ax_pthread_flags"])
-
-# Clang takes -pthread (never supported any other flag), but we'll try with -lpthread first
-
-AS_IF([test "x$ax_pthread_clang" = "xyes"],
-      [ax_pthread_flags="-pthread,-lpthread -pthread"])
-
-
-# The presence of a feature test macro requesting re-entrant function
-# definitions is, on some systems, a strong hint that pthreads support is
-# correctly enabled
-
-case $host_os in
-        darwin* | hpux* | linux* | osf* | solaris*)
-        ax_pthread_check_macro="_REENTRANT"
-        ;;
-
-        aix*)
-        ax_pthread_check_macro="_THREAD_SAFE"
-        ;;
-
-        *)
-        ax_pthread_check_macro="--"
-        ;;
-esac
-AS_IF([test "x$ax_pthread_check_macro" = "x--"],
-      [ax_pthread_check_cond=0],
-      [ax_pthread_check_cond="!defined($ax_pthread_check_macro)"])
-
-
-if test "x$ax_pthread_ok" = "xno"; then
-for ax_pthread_try_flag in $ax_pthread_flags; do
-
-        case $ax_pthread_try_flag in
                 none)
                 AC_MSG_CHECKING([whether pthreads work without any flags])
                 ;;
 
-                *,*)
-                PTHREAD_CFLAGS=`echo $ax_pthread_try_flag | sed "s/^\(.*\),\(.*\)$/\1/"`
-                PTHREAD_LIBS=`echo $ax_pthread_try_flag | sed "s/^\(.*\),\(.*\)$/\2/"`
-                AC_MSG_CHECKING([whether pthreads work with "$PTHREAD_CFLAGS" and "$PTHREAD_LIBS"])
-                ;;
-
                 -*)
-                AC_MSG_CHECKING([whether pthreads work with $ax_pthread_try_flag])
+                AC_MSG_CHECKING([whether pthreads work with $flag])
-                PTHREAD_CFLAGS="$ax_pthread_try_flag"
+                PTHREAD_CFLAGS="$flag"
                 ;;
 
                 pthread-config)
                 AC_CHECK_PROG([ax_pthread_config], [pthread-config], [yes], [no])
-                AS_IF([test "x$ax_pthread_config" = "xno"], [continue])
+                if test x"$ax_pthread_config" = xno; then continue; fi
                 PTHREAD_CFLAGS="`pthread-config --cflags`"
                 PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
                 ;;
 
                 *)
-                AC_MSG_CHECKING([for the pthreads library -l$ax_pthread_try_flag])
+                AC_MSG_CHECKING([for the pthreads library -l$flag])
-                PTHREAD_LIBS="-l$ax_pthread_try_flag"
+                PTHREAD_LIBS="-l$flag"
                 ;;
         esac
 
-        ax_pthread_save_CFLAGS="$CFLAGS"
+        save_LIBS="$LIBS"
-        ax_pthread_save_LIBS="$LIBS"
+        save_CFLAGS="$CFLAGS"
-        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
         LIBS="$PTHREAD_LIBS $LIBS"
+        CFLAGS="$CFLAGS $PTHREAD_CFLAGS $ax_pthread_extra_flags"
 
         # Check for various functions.  We must include pthread.h,
         # since some functions may be macros.  (On the Sequent, we
@@ -314,18 +218,8 @@ for ax_pthread_try_flag in $ax_pthread_flags; do
         # pthread_cleanup_push because it is one of the few pthread
         # functions on Solaris that doesn't have a non-functional libc stub.
         # We try pthread_create on general principles.
-
         AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <pthread.h>
-#                       if $ax_pthread_check_cond
+                        static void routine(void *a) { a = 0; }
-#                        error "$ax_pthread_check_macro must be defined"
-#                       endif
-                        static void *some_global = NULL;
-                        static void routine(void *a)
-                          {
-                             /* To avoid any unused-parameter or
-                                unused-but-set-parameter warning.  */
-                             some_global = a;
-                          }
                         static void *start_routine(void *a) { return a; }],
                        [pthread_t th; pthread_attr_t attr;
                         pthread_create(&th, 0, start_routine, 0);
@@ -333,187 +227,101 @@ for ax_pthread_try_flag in $ax_pthread_flags; do
                         pthread_attr_init(&attr);
                         pthread_cleanup_push(routine, 0);
                         pthread_cleanup_pop(0) /* ; */])],
-            [ax_pthread_ok=yes],
+                [ax_pthread_ok=yes],
-            [])
+                [])
 
-        CFLAGS="$ax_pthread_save_CFLAGS"
+        LIBS="$save_LIBS"
-        LIBS="$ax_pthread_save_LIBS"
+        CFLAGS="$save_CFLAGS"
 
         AC_MSG_RESULT([$ax_pthread_ok])
-        AS_IF([test "x$ax_pthread_ok" = "xyes"], [break])
+        if test "x$ax_pthread_ok" = xyes; then
+                break;
+        fi
 
         PTHREAD_LIBS=""
         PTHREAD_CFLAGS=""
 done
 fi
 
-
-# Clang needs special handling, because older versions handle the -pthread
-# option in a rather... idiosyncratic way
-
-if test "x$ax_pthread_clang" = "xyes"; then
-
-        # Clang takes -pthread; it has never supported any other flag
-
-        # (Note 1: This will need to be revisited if a system that Clang
-        # supports has POSIX threads in a separate library.  This tends not
-        # to be the way of modern systems, but it's conceivable.)
-
-        # (Note 2: On some systems, notably Darwin, -pthread is not needed
-        # to get POSIX threads support; the API is always present and
-        # active.  We could reasonably leave PTHREAD_CFLAGS empty.  But
-        # -pthread does define _REENTRANT, and while the Darwin headers
-        # ignore this macro, third-party headers might not.)
-
-        # However, older versions of Clang make a point of warning the user
-        # that, in an invocation where only linking and no compilation is
-        # taking place, the -pthread option has no effect ("argument unused
-        # during compilation").  They expect -pthread to be passed in only
-        # when source code is being compiled.
-        #
-        # Problem is, this is at odds with the way Automake and most other
-        # C build frameworks function, which is that the same flags used in
-        # compilation (CFLAGS) are also used in linking.  Many systems
-        # supported by AX_PTHREAD require exactly this for POSIX threads
-        # support, and in fact it is often not straightforward to specify a
-        # flag that is used only in the compilation phase and not in
-        # linking.  Such a scenario is extremely rare in practice.
-        #
-        # Even though use of the -pthread flag in linking would only print
-        # a warning, this can be a nuisance for well-run software projects
-        # that build with -Werror.  So if the active version of Clang has
-        # this misfeature, we search for an option to squash it.
-
-        AC_CACHE_CHECK([whether Clang needs flag to prevent "argument unused" warning when linking with -pthread],
-            [ax_cv_PTHREAD_CLANG_NO_WARN_FLAG],
-            [ax_cv_PTHREAD_CLANG_NO_WARN_FLAG=unknown
-             # Create an alternate version of $ac_link that compiles and
-             # links in two steps (.c -> .o, .o -> exe) instead of one
-             # (.c -> exe), because the warning occurs only in the second
-             # step
-             ax_pthread_save_ac_link="$ac_link"
-             ax_pthread_sed='s/conftest\.\$ac_ext/conftest.$ac_objext/g'
-             ax_pthread_link_step=`AS_ECHO(["$ac_link"]) | sed "$ax_pthread_sed"`
-             ax_pthread_2step_ac_link="($ac_compile) && (echo ==== >&5) && ($ax_pthread_link_step)"
-             ax_pthread_save_CFLAGS="$CFLAGS"
-             for ax_pthread_try in '' -Qunused-arguments -Wno-unused-command-line-argument unknown; do
-                AS_IF([test "x$ax_pthread_try" = "xunknown"], [break])
-                CFLAGS="-Werror -Wunknown-warning-option $ax_pthread_try -pthread $ax_pthread_save_CFLAGS"
-                ac_link="$ax_pthread_save_ac_link"
-                AC_LINK_IFELSE([AC_LANG_SOURCE([[int main(void){return 0;}]])],
-                    [ac_link="$ax_pthread_2step_ac_link"
-                     AC_LINK_IFELSE([AC_LANG_SOURCE([[int main(void){return 0;}]])],
-                         [break])
-                    ])
-             done
-             ac_link="$ax_pthread_save_ac_link"
-             CFLAGS="$ax_pthread_save_CFLAGS"
-             AS_IF([test "x$ax_pthread_try" = "x"], [ax_pthread_try=no])
-             ax_cv_PTHREAD_CLANG_NO_WARN_FLAG="$ax_pthread_try"
-            ])
-
-        case "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" in
-                no | unknown) ;;
-                *) PTHREAD_CFLAGS="$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG $PTHREAD_CFLAGS" ;;
-        esac
-
-fi # $ax_pthread_clang = yes
-
-
-
 # Various other checks:
-if test "x$ax_pthread_ok" = "xyes"; then
+if test "x$ax_pthread_ok" = xyes; then
-        ax_pthread_save_CFLAGS="$CFLAGS"
+        save_LIBS="$LIBS"
-        ax_pthread_save_LIBS="$LIBS"
-        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
         LIBS="$PTHREAD_LIBS $LIBS"
+        save_CFLAGS="$CFLAGS"
+        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
 
         # Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
-        AC_CACHE_CHECK([for joinable pthread attribute],
+        AC_MSG_CHECKING([for joinable pthread attribute])
-            [ax_cv_PTHREAD_JOINABLE_ATTR],
+        attr_name=unknown
-            [ax_cv_PTHREAD_JOINABLE_ATTR=unknown
+        for attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
-             for ax_pthread_attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
+            AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <pthread.h>],
-                 AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <pthread.h>],
+                           [int attr = $attr; return attr /* ; */])],
-                                                 [int attr = $ax_pthread_attr; return attr /* ; */])],
+                [attr_name=$attr; break],
-                                [ax_cv_PTHREAD_JOINABLE_ATTR=$ax_pthread_attr; break],
+                [])
-                                [])
+        done
-             done
+        AC_MSG_RESULT([$attr_name])
-            ])
+        if test "$attr_name" != PTHREAD_CREATE_JOINABLE; then
-        AS_IF([test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xunknown" && \
+            AC_DEFINE_UNQUOTED([PTHREAD_CREATE_JOINABLE], [$attr_name],
-               test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xPTHREAD_CREATE_JOINABLE" && \
+                               [Define to necessary symbol if this constant
-               test "x$ax_pthread_joinable_attr_defined" != "xyes"],
+                                uses a non-standard name on your system.])
-              [AC_DEFINE_UNQUOTED([PTHREAD_CREATE_JOINABLE],
+        fi
-                                  [$ax_cv_PTHREAD_JOINABLE_ATTR],
-                                  [Define to necessary symbol if this constant
-                                   uses a non-standard name on your system.])
-               ax_pthread_joinable_attr_defined=yes
-              ])
 
-        AC_CACHE_CHECK([whether more special flags are required for pthreads],
+        AC_MSG_CHECKING([if more special flags are required for pthreads])
-            [ax_cv_PTHREAD_SPECIAL_FLAGS],
+        flag=no
-            [ax_cv_PTHREAD_SPECIAL_FLAGS=no
+        case ${host_os} in
-             case $host_os in
+            aix* | freebsd* | darwin*) flag="-D_THREAD_SAFE";;
-             solaris*)
+            osf* | hpux*) flag="-D_REENTRANT";;
-             ax_cv_PTHREAD_SPECIAL_FLAGS="-D_POSIX_PTHREAD_SEMANTICS"
+            solaris*)
-             ;;
+            if test "$GCC" = "yes"; then
-             esac
+                flag="-D_REENTRANT"
-            ])
+            else
-        AS_IF([test "x$ax_cv_PTHREAD_SPECIAL_FLAGS" != "xno" && \
+                # TODO: What about Clang on Solaris?
-               test "x$ax_pthread_special_flags_added" != "xyes"],
+                flag="-mt -D_REENTRANT"
-              [PTHREAD_CFLAGS="$ax_cv_PTHREAD_SPECIAL_FLAGS $PTHREAD_CFLAGS"
+            fi
-               ax_pthread_special_flags_added=yes])
+            ;;
+        esac
+        AC_MSG_RESULT([$flag])
+        if test "x$flag" != xno; then
+            PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS"
+        fi
 
         AC_CACHE_CHECK([for PTHREAD_PRIO_INHERIT],
-            [ax_cv_PTHREAD_PRIO_INHERIT],
+            [ax_cv_PTHREAD_PRIO_INHERIT], [
-            [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <pthread.h>]],
+                AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <pthread.h>]],
-                                             [[int i = PTHREAD_PRIO_INHERIT;
+                                                [[int i = PTHREAD_PRIO_INHERIT;]])],
-                                               return i;]])],
+                    [ax_cv_PTHREAD_PRIO_INHERIT=yes],
-                            [ax_cv_PTHREAD_PRIO_INHERIT=yes],
+                    [ax_cv_PTHREAD_PRIO_INHERIT=no])
-                            [ax_cv_PTHREAD_PRIO_INHERIT=no])
             ])
-        AS_IF([test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes" && \
+        AS_IF([test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes"],
-               test "x$ax_pthread_prio_inherit_defined" != "xyes"],
+            [AC_DEFINE([HAVE_PTHREAD_PRIO_INHERIT], [1], [Have PTHREAD_PRIO_INHERIT.])])
-              [AC_DEFINE([HAVE_PTHREAD_PRIO_INHERIT], [1], [Have PTHREAD_PRIO_INHERIT.])
-               ax_pthread_prio_inherit_defined=yes
-              ])
 
-        CFLAGS="$ax_pthread_save_CFLAGS"
+        LIBS="$save_LIBS"
-        LIBS="$ax_pthread_save_LIBS"
+        CFLAGS="$save_CFLAGS"
 
         # More AIX lossage: compile with *_r variant
-        if test "x$GCC" != "xyes"; then
+        if test "x$GCC" != xyes; then
             case $host_os in
                 aix*)
                 AS_CASE(["x/$CC"],
-                    [x*/c89|x*/c89_128|x*/c99|x*/c99_128|x*/cc|x*/cc128|x*/xlc|x*/xlc_v6|x*/xlc128|x*/xlc128_v6],
+                  [x*/c89|x*/c89_128|x*/c99|x*/c99_128|x*/cc|x*/cc128|x*/xlc|x*/xlc_v6|x*/xlc128|x*/xlc128_v6],
-                    [#handle absolute path differently from PATH based program lookup
+                  [#handle absolute path differently from PATH based program lookup
-                     AS_CASE(["x$CC"],
+                   AS_CASE(["x$CC"],
-                         [x/*],
+                     [x/*],
-                         [
+                     [AS_IF([AS_EXECUTABLE_P([${CC}_r])],[PTHREAD_CC="${CC}_r"])],
-			   AS_IF([AS_EXECUTABLE_P([${CC}_r])],[PTHREAD_CC="${CC}_r"])
+                     [AC_CHECK_PROGS([PTHREAD_CC],[${CC}_r],[$CC])])])
-			   AS_IF([test "x${CXX}" != "x"], [AS_IF([AS_EXECUTABLE_P([${CXX}_r])],[PTHREAD_CXX="${CXX}_r"])])
-			 ],
-                         [
-			   AC_CHECK_PROGS([PTHREAD_CC],[${CC}_r],[$CC])
-			   AS_IF([test "x${CXX}" != "x"], [AC_CHECK_PROGS([PTHREAD_CXX],[${CXX}_r],[$CXX])])
-			 ]
-                     )
-                    ])
                 ;;
             esac
         fi
 fi
 
 test -n "$PTHREAD_CC" || PTHREAD_CC="$CC"
-test -n "$PTHREAD_CXX" || PTHREAD_CXX="$CXX"
 
 AC_SUBST([PTHREAD_LIBS])
 AC_SUBST([PTHREAD_CFLAGS])
 AC_SUBST([PTHREAD_CC])
-AC_SUBST([PTHREAD_CXX])
 
 # Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
-if test "x$ax_pthread_ok" = "xyes"; then
+if test x"$ax_pthread_ok" = xyes; then
         ifelse([$1],,[AC_DEFINE([HAVE_PTHREAD],[1],[Define if you have POSIX threads libraries and header files.])],[$1])
         :
 else

m4/getopt.m4

@@ -1,72 +1,71 @@
-dnl SPDX-License-Identifier: FSFULLR
+# getopt.m4 serial 14 (modified version)
-
+dnl Copyright (C) 2002-2006, 2008 Free Software Foundation, Inc.
-# getopt.m4 serial 49 (modified version)
-dnl Copyright (C) 2002-2006, 2008-2023 Free Software Foundation, Inc.
 dnl This file is free software; the Free Software Foundation
 dnl gives unlimited permission to copy and/or distribute it,
 dnl with or without modifications, as long as this notice is preserved.
 
-# This version has been modified to reduce complexity since we only need
+# The getopt module assume you want GNU getopt, with getopt_long etc,
-# GNU getopt_long and do not care about replacing getopt.
+# rather than vanilla POSIX getopt.  This means your code should
+# always include <getopt.h> for the getopt prototypes.
 
-# Check for a POSIX compliant getopt function with GNU extensions (such as
+AC_DEFUN([gl_GETOPT_SUBSTITUTE],
-# options with optional arguments) and the functions getopt_long,
-# getopt_long_only.
-AC_DEFUN([gl_FUNC_GETOPT_GNU],
 [
-  AC_REQUIRE([gl_GETOPT_CHECK_HEADERS])
+  AC_LIBOBJ([getopt])
+  AC_LIBOBJ([getopt1])
+  gl_GETOPT_SUBSTITUTE_HEADER
+])
 
-  if test -n "$gl_replace_getopt"; then
+AC_DEFUN([gl_GETOPT_SUBSTITUTE_HEADER],
-    gl_GETOPT_SUBSTITUTE
+[
-  fi
+  GETOPT_H=getopt.h
+  AC_DEFINE([__GETOPT_PREFIX], [[rpl_]],
+    [Define to rpl_ if the getopt replacement functions and variables
+     should be used.])
+  AC_SUBST([GETOPT_H])
 ])
 
 AC_DEFUN([gl_GETOPT_CHECK_HEADERS],
 [
-  gl_replace_getopt=
+  if test -z "$GETOPT_H"; then
-
+    AC_CHECK_HEADERS([getopt.h], [], [GETOPT_H=getopt.h])
-  if test -z "$gl_replace_getopt"; then
-    AC_CHECK_HEADERS([getopt.h], [], [gl_replace_getopt=yes])
   fi
 
-  if test -z "$gl_replace_getopt"; then
+  if test -z "$GETOPT_H"; then
-    AC_CHECK_FUNCS([getopt_long], [], [gl_replace_getopt=yes])
+    AC_CHECK_FUNCS([getopt_long], [], [GETOPT_H=getopt.h])
   fi
 
   dnl BSD getopt_long uses a way to reset option processing, that is different
   dnl from GNU and Solaris (which copied the GNU behavior). We support both
   dnl GNU and BSD style resetting of getopt_long(), so there's no need to use
   dnl GNU getopt_long() on BSD due to different resetting style.
-  if test -z "$gl_replace_getopt"; then
+  dnl
+  dnl With getopt_long(), some BSD versions have a bug in handling optional
+  dnl arguments. This bug appears only if the environment variable
+  dnl POSIXLY_CORRECT has been set, so it shouldn't be too bad in most
+  dnl cases; probably most don't have that variable set. But if we actually
+  dnl hit this bug, it is a real problem due to our heavy use of optional
+  dnl arguments.
+  dnl
+  dnl According to CVS logs, the bug was introduced in OpenBSD in 2003-09-22
+  dnl and copied to FreeBSD in 2004-02-24. It was fixed in both in 2006-09-22,
+  dnl so the affected versions shouldn't be popular anymore anyway. NetBSD
+  dnl never had this bug. TODO: What about Darwin and others?
+  if test -z "$GETOPT_H"; then
     AC_CHECK_DECL([optreset],
       [AC_DEFINE([HAVE_OPTRESET], 1,
         [Define to 1 if getopt.h declares extern int optreset.])],
       [], [#include <getopt.h>])
   fi
 
-  dnl POSIX 2008 does not specify leading '+' behavior, but see
+  dnl Solaris 10 getopt doesn't handle `+' as a leading character in an
-  dnl http://austingroupbugs.net/view.php?id=191 for a recommendation on
+  dnl option string (as of 2005-05-05). We don't use that feature, so this
-  dnl the next version of POSIX.  We don't use that feature, so this
   dnl is not a problem for us. Thus, the respective test was removed here.
-
-  dnl Checks for getopt handling '-' as a leading character in an option
-  dnl string were removed, since we also don't use that feature.
-
 ])
 
-AC_DEFUN([gl_GETOPT_SUBSTITUTE],
+AC_DEFUN([gl_GETOPT_IFELSE],
 [
-  AC_LIBOBJ([getopt])
+  AC_REQUIRE([gl_GETOPT_CHECK_HEADERS])
-  AC_LIBOBJ([getopt1])
+  AS_IF([test -n "$GETOPT_H"], [$1], [$2])
-
-  AC_CHECK_HEADERS_ONCE([sys/cdefs.h])
-
-  AC_DEFINE([__GETOPT_PREFIX], [[rpl_]],
-    [Define to rpl_ if the getopt replacement functions and variables
-     should be used.])
-
-  GETOPT_H=getopt.h
-  AC_SUBST([GETOPT_H])
 ])
 
-AC_DEFUN([gl_GETOPT], [gl_FUNC_GETOPT_GNU])
+AC_DEFUN([gl_GETOPT], [gl_GETOPT_IFELSE([gl_GETOPT_SUBSTITUTE])])

m4/posix-shell.m4

@@ -1,5 +1,3 @@
-dnl SPDX-License-Identifier: FSFULLR
-
 # Find a POSIX-conforming shell.
 
 # Copyright (C) 2007-2008 Free Software Foundation, Inc.

m4/tuklib_common.m4

@@ -1,6 +1,3 @@
-# SPDX-License-Identifier: 0BSD
-
-#############################################################################
 #
 # SYNOPSIS
 #
@@ -10,11 +7,13 @@
 #
 #   Common checks for tuklib.
 #
-#############################################################################
+# COPYING
 #
-# Author: Lasse Collin
+#   Author: Lasse Collin
+#
+#   This file has been put into the public domain.
+#   You can do whatever you want with this file.
 #
-#############################################################################
 
 AC_DEFUN_ONCE([TUKLIB_COMMON], [
 AC_REQUIRE([AC_CANONICAL_HOST])

m4/tuklib_cpucores.m4

@@ -1,6 +1,3 @@
-# SPDX-License-Identifier: 0BSD
-
-#############################################################################
 #
 # SYNOPSIS
 #
@@ -12,19 +9,17 @@
 #   This information is used by tuklib_cpucores.c.
 #
 #   Supported methods:
-#     - GetSystemInfo(): Windows (including Cygwin)
-#     - sched_getaffinity(): glibc (GNU/Linux, GNU/kFreeBSD)
-#     - cpuset_getaffinity(): FreeBSD
 #     - sysctl(): BSDs, OS/2
-#     - sysconf(): GNU/Linux, Solaris, Tru64, IRIX, AIX, QNX, Cygwin (but
+#     - sysconf(): GNU/Linux, Solaris, Tru64, IRIX, AIX, Cygwin
-#       GetSystemInfo() is used on Cygwin)
 #     - pstat_getdynamic(): HP-UX
 #
-#############################################################################
+# COPYING
 #
-# Author: Lasse Collin
+#   Author: Lasse Collin
+#
+#   This file has been put into the public domain.
+#   You can do whatever you want with this file.
 #
-#############################################################################
 
 AC_DEFUN_ONCE([TUKLIB_CPUCORES], [
 AC_REQUIRE([TUKLIB_COMMON])
@@ -35,67 +30,11 @@ AC_CHECK_HEADERS([sys/param.h])
 AC_CACHE_CHECK([how to detect the number of available CPU cores],
 	[tuklib_cv_cpucores_method], [
 
-# Maybe checking $host_os would be enough but this matches what
+# Look for sysctl() solution first, because on OS/2, both sysconf()
-# tuklib_cpucores.c does.
+# and sysctl() pass the tests in this file, but only sysctl()
-#
+# actually works.
-# NOTE: IRIX has a compiler that doesn't error out with #error, so use
-# a non-compilable text instead of #error to generate an error.
 AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
-#if defined(_WIN32) || defined(__CYGWIN__)
+#include <sys/types.h>
-int main(void) { return 0; }
-#else
-compile error
-#endif
-]])], [tuklib_cv_cpucores_method=special], [
-
-# glibc-based systems (GNU/Linux and GNU/kFreeBSD) have sched_getaffinity().
-# The CPU_COUNT() macro was added in glibc 2.9 so we try to link the
-# test program instead of merely compiling it. glibc 2.9 is old enough that
-# if someone uses the code on older glibc, the fallback to sysconf() should
-# be good enough.
-AC_LINK_IFELSE([AC_LANG_SOURCE([[
-#include <sched.h>
-int
-main(void)
-{
-	cpu_set_t cpu_mask;
-	sched_getaffinity(0, sizeof(cpu_mask), &cpu_mask);
-	return CPU_COUNT(&cpu_mask);
-}
-]])], [tuklib_cv_cpucores_method=sched_getaffinity], [
-
-# FreeBSD has both cpuset and sysctl. Look for cpuset first because
-# it's a better approach.
-#
-# This test would match on GNU/kFreeBSD too but it would require
-# -lfreebsd-glue when linking and thus in the current form this would
-# fail on GNU/kFreeBSD. The above test for sched_getaffinity() matches
-# on GNU/kFreeBSD so the test below should never run on that OS.
-AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
-#include <sys/param.h>
-#include <sys/cpuset.h>
-
-int
-main(void)
-{
-	cpuset_t set;
-	cpuset_getaffinity(CPU_LEVEL_WHICH, CPU_WHICH_PID, -1,
-			sizeof(set), &set);
-	return 0;
-}
-]])], [tuklib_cv_cpucores_method=cpuset], [
-
-# On OS/2, both sysconf() and sysctl() pass the tests in this file,
-# but only sysctl() works. On QNX it's the opposite: only sysconf() works
-# (although it assumes that _POSIX_SOURCE, _XOPEN_SOURCE, and _POSIX_C_SOURCE
-# are undefined or alternatively _QNX_SOURCE is defined).
-#
-# We test sysctl() first and intentionally break the sysctl() test on QNX
-# so that sysctl() is never used on QNX.
-AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
-#ifdef __QNX__
-compile error
-#endif
 #ifdef HAVE_SYS_PARAM_H
 #	include <sys/param.h>
 #endif
@@ -103,12 +42,7 @@ compile error
 int
 main(void)
 {
-#ifdef HW_NCPUONLINE
-	/* This is preferred on OpenBSD, see tuklib_cpucores.c. */
-	int name[2] = { CTL_HW, HW_NCPUONLINE };
-#else
 	int name[2] = { CTL_HW, HW_NCPU };
-#endif
 	int cpus;
 	size_t cpus_size = sizeof(cpus);
 	sysctl(name, 2, &cpus, &cpus_size, NULL, 0);
@@ -148,19 +82,9 @@ main(void)
 ]])], [tuklib_cv_cpucores_method=pstat_getdynamic], [
 
 	tuklib_cv_cpucores_method=unknown
-])])])])])])])
+])])])])
 
 case $tuklib_cv_cpucores_method in
-	sched_getaffinity)
-		AC_DEFINE([TUKLIB_CPUCORES_SCHED_GETAFFINITY], [1],
-			[Define to 1 if the number of available CPU cores
-			can be detected with sched_getaffinity()])
-		;;
-	cpuset)
-		AC_DEFINE([TUKLIB_CPUCORES_CPUSET], [1],
-			[Define to 1 if the number of available CPU cores
-			can be detected with cpuset(2).])
-		;;
 	sysctl)
 		AC_DEFINE([TUKLIB_CPUCORES_SYSCTL], [1],
 			[Define to 1 if the number of available CPU cores

m4/tuklib_integer.m4

@@ -1,6 +1,3 @@
-# SPDX-License-Identifier: 0BSD
-
-#############################################################################
 #
 # SYNOPSIS
 #
@@ -10,41 +7,28 @@
 #
 #   Checks for tuklib_integer.h:
 #     - Endianness
-#     - Does the compiler or the operating system provide byte swapping macros
+#     - Does operating system provide byte swapping macros
-#     - Does the hardware support fast unaligned access to 16-bit, 32-bit,
+#     - Does the hardware support fast unaligned access to 16-bit
-#       and 64-bit integers
+#       and 32-bit integers
 #
-#############################################################################
+# COPYING
 #
-# Author: Lasse Collin
+#   Author: Lasse Collin
+#
+#   This file has been put into the public domain.
+#   You can do whatever you want with this file.
 #
-#############################################################################
 
 AC_DEFUN_ONCE([TUKLIB_INTEGER], [
 AC_REQUIRE([TUKLIB_COMMON])
 AC_REQUIRE([AC_C_BIGENDIAN])
+AC_CHECK_HEADERS([byteswap.h sys/endian.h sys/byteorder.h], [break])
 
-AC_MSG_CHECKING([if __builtin_bswap16/32/64 are supported])
+# Even if we have byteswap.h, we may lack the specific macros/functions.
-AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],
+if test x$ac_cv_header_byteswap_h = xyes ; then
-			[[__builtin_bswap16(1);
+	m4_foreach([FUNC], [bswap_16,bswap_32,bswap_64], [
-			__builtin_bswap32(1);
+		AC_MSG_CHECKING([if FUNC is available])
-			__builtin_bswap64(1);]])],
+		AC_LINK_IFELSE([AC_LANG_SOURCE([
-[
-	AC_DEFINE([HAVE___BUILTIN_BSWAPXX], [1],
-		[Define to 1 if the GNU C extensions
-		__builtin_bswap16/32/64 are supported.])
-	AC_MSG_RESULT([yes])
-], [
-	AC_MSG_RESULT([no])
-
-	# Look for other byteswapping methods.
-	AC_CHECK_HEADERS([byteswap.h sys/endian.h sys/byteorder.h], [break])
-
-	# Even if we have byteswap.h we may lack the specific macros/functions.
-	if test x$ac_cv_header_byteswap_h = xyes ; then
-		m4_foreach([FUNC], [bswap_16,bswap_32,bswap_64], [
-			AC_MSG_CHECKING([if FUNC is available])
-			AC_LINK_IFELSE([AC_LANG_SOURCE([
 #include <byteswap.h>
 int
 main(void)
@@ -52,61 +36,28 @@ main(void)
 	FUNC[](42);
 	return 0;
 }
-			])], [
+		])], [
-				AC_DEFINE(HAVE_[]m4_toupper(FUNC), [1],
+			AC_DEFINE(HAVE_[]m4_toupper(FUNC), [1],
 					[Define to 1 if] FUNC [is available.])
-				AC_MSG_RESULT([yes])
+			AC_MSG_RESULT([yes])
-			], [AC_MSG_RESULT([no])])
+		], [AC_MSG_RESULT([no])])
 
-		])dnl
+	])dnl
-	fi
+fi
-])
 
 AC_MSG_CHECKING([if unaligned memory access should be used])
-AC_ARG_ENABLE([unaligned-access], AS_HELP_STRING([--enable-unaligned-access],
+AC_ARG_ENABLE([unaligned-access], AC_HELP_STRING([--enable-unaligned-access],
 		[Enable if the system supports *fast* unaligned memory access
-		with 16-bit, 32-bit, and 64-bit integers. By default,
+		with 16-bit and 32-bit integers. By default, this is enabled
-		this is enabled on x86, x86-64,
+		only on x86, x86_64, and big endian PowerPC.]),
-		32/64-bit big endian PowerPC,
-		64-bit little endian PowerPC,
-		and some ARM, ARM64, and RISC-V systems.]),
 	[], [enable_unaligned_access=auto])
 if test "x$enable_unaligned_access" = xauto ; then
-	# NOTE: There might be other architectures on which unaligned access
+	# TODO: There may be other architectures, on which unaligned access
-	# is fast.
+	# is OK.
 	case $host_cpu in
-		i?86|x86_64|powerpc|powerpc64|powerpc64le)
+		i?86|x86_64|powerpc|powerpc64)
 			enable_unaligned_access=yes
 			;;
-		arm*|aarch64*|riscv*)
-			# On 32-bit and 64-bit ARM, GCC and Clang
-			# #define __ARM_FEATURE_UNALIGNED if
-			# unaligned access is supported.
-			#
-			# Exception: GCC at least up to 13.2.0
-			# defines it even when using -mstrict-align
-			# so in that case this autodetection goes wrong.
-			# Most of the time -mstrict-align isn't used so it
-			# shouldn't be a common problem in practice. See:
-			# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=111555
-			#
-			# RISC-V C API Specification says that if
-			# __riscv_misaligned_fast is defined then
-			# unaligned access is known to be fast.
-			#
-			# MSVC is handled as a special case: We assume that
-			# 32/64-bit ARM supports fast unaligned access.
-			# If MSVC gets RISC-V support then this will assume
-			# fast unaligned access on RISC-V too.
-			AC_COMPILE_IFELSE([AC_LANG_SOURCE([
-#if !defined(__ARM_FEATURE_UNALIGNED) \
-		&& !defined(__riscv_misaligned_fast) \
-		&& !defined(_MSC_VER)
-compile error
-#endif
-int main(void) { return 0; }
-])], [enable_unaligned_access=yes], [enable_unaligned_access=no])
-			;;
 		*)
 			enable_unaligned_access=no
 			;;
@@ -114,39 +65,10 @@ int main(void) { return 0; }
 fi
 if test "x$enable_unaligned_access" = xyes ; then
 	AC_DEFINE([TUKLIB_FAST_UNALIGNED_ACCESS], [1], [Define to 1 if
-		the system supports fast unaligned access to 16-bit,
+		the system supports fast unaligned access to 16-bit and
-		32-bit, and 64-bit integers.])
+		32-bit integers.])
 	AC_MSG_RESULT([yes])
 else
 	AC_MSG_RESULT([no])
 fi
-
-AC_MSG_CHECKING([if unsafe type punning should be used])
-AC_ARG_ENABLE([unsafe-type-punning],
-	AS_HELP_STRING([--enable-unsafe-type-punning],
-		[This introduces strict aliasing violations and may result
-		in broken code. However, this might improve performance in
-		some cases, especially with old compilers (e.g.
-		GCC 3 and early 4.x on x86, GCC < 6 on ARMv6 and ARMv7).]),
-	[], [enable_unsafe_type_punning=no])
-if test "x$enable_unsafe_type_punning" = xyes ; then
-	AC_DEFINE([TUKLIB_USE_UNSAFE_TYPE_PUNNING], [1], [Define to 1 to use
-		unsafe type punning, e.g. char *x = ...; *(int *)x = 123;
-		which violates strict aliasing rules and thus is
-		undefined behavior and might result in broken code.])
-	AC_MSG_RESULT([yes])
-else
-	AC_MSG_RESULT([no])
-fi
-
-AC_MSG_CHECKING([if __builtin_assume_aligned is supported])
-AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[__builtin_assume_aligned("", 1);]])],
-	[
-		AC_DEFINE([HAVE___BUILTIN_ASSUME_ALIGNED], [1],
-			[Define to 1 if the GNU C extension
-			__builtin_assume_aligned is supported.])
-		AC_MSG_RESULT([yes])
-	], [
-		AC_MSG_RESULT([no])
-	])
 ])dnl

m4/tuklib_mbstr.m4

@@ -1,6 +1,3 @@
-# SPDX-License-Identifier: 0BSD
-
-#############################################################################
 #
 # SYNOPSIS
 #
@@ -18,11 +15,13 @@
 #   functions, but each function is put into a separate .c file so
 #   that it is possible to pick only what is strictly needed.
 #
-#############################################################################
+# COPYING
 #
-# Author: Lasse Collin
+#   Author: Lasse Collin
+#
+#   This file has been put into the public domain.
+#   You can do whatever you want with this file.
 #
-#############################################################################
 
 AC_DEFUN_ONCE([TUKLIB_MBSTR], [
 AC_REQUIRE([TUKLIB_COMMON])

m4/tuklib_physmem.m4

@@ -1,6 +1,3 @@
-# SPDX-License-Identifier: 0BSD
-
-#############################################################################
 #
 # SYNOPSIS
 #
@@ -13,8 +10,8 @@
 #
 #   Supported methods:
 #
-#     - Windows (including Cygwin), OS/2, DJGPP (DOS), OpenVMS, AROS,
+#     - Windows (including Cygwin), OS/2, DJGPP (DOS), and OpenVMS have
-#       and QNX have operating-system specific functions.
+#       operating-system specific functions.
 #
 #     - AIX has _system_configuration.physmem.
 #
@@ -32,11 +29,13 @@
 #     - sysinfo() works on Linux/dietlibc and probably on other Linux
 #       systems whose libc may lack sysconf().
 #
-#############################################################################
+# COPYING
 #
-# Author: Lasse Collin
+#   Author: Lasse Collin
+#
+#   This file has been put into the public domain.
+#   You can do whatever you want with this file.
 #
-#############################################################################
 
 AC_DEFUN_ONCE([TUKLIB_PHYSMEM], [
 AC_REQUIRE([TUKLIB_COMMON])
@@ -55,7 +54,7 @@ AC_CACHE_CHECK([how to detect the amount of physical memory],
 AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
 #if defined(_WIN32) || defined(__CYGWIN__) || defined(__OS2__) \
 		|| defined(__DJGPP__) || defined(__VMS) \
-		|| defined(AMIGA) || defined(__AROS__) || defined(__QNX__)
+		|| defined(AMIGA) || defined(__AROS__)
 int main(void) { return 0; }
 #else
 compile error
@@ -89,6 +88,7 @@ main(void)
 ]])], [tuklib_cv_physmem_method=sysconf], [
 
 AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
+#include <sys/types.h>
 #ifdef HAVE_SYS_PARAM_H
 #	include <sys/param.h>
 #endif

m4/tuklib_progname.m4

@@ -1,6 +1,3 @@
-# SPDX-License-Identifier: 0BSD
-
-#############################################################################
 #
 # SYNOPSIS
 #
@@ -14,16 +11,15 @@
 #   This .m4 file is needed allow this module to use glibc's
 #   program_invocation_name.
 #
-#############################################################################
+# COPYING
 #
-# Author: Lasse Collin
+#   Author: Lasse Collin
+#
+#   This file has been put into the public domain.
+#   You can do whatever you want with this file.
 #
-#############################################################################
 
 AC_DEFUN_ONCE([TUKLIB_PROGNAME], [
 AC_REQUIRE([TUKLIB_COMMON])
-AC_CHECK_DECL([program_invocation_name], [AC_DEFINE(
+AC_CHECK_DECLS([program_invocation_name], [], [], [#include <errno.h>])
-	[HAVE_PROGRAM_INVOCATION_NAME], [1],
-	[Define to 1 if 'program_invocation_name' is declared in <errno.h>.])],
-	[], [#include <errno.h>])
 ])dnl

m4/visibility.m4

@@ -1,84 +0,0 @@
-dnl SPDX-License-Identifier: FSFULLR
-
-# visibility.m4 serial 8
-dnl Copyright (C) 2005, 2008, 2010-2023 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-dnl Tests whether the compiler supports the command-line option
-dnl -fvisibility=hidden and the function and variable attributes
-dnl __attribute__((__visibility__("hidden"))) and
-dnl __attribute__((__visibility__("default"))).
-dnl Does *not* test for __visibility__("protected") - which has tricky
-dnl semantics (see the 'vismain' test in glibc) and does not exist e.g. on
-dnl Mac OS X.
-dnl Does *not* test for __visibility__("internal") - which has processor
-dnl dependent semantics.
-dnl Does *not* test for #pragma GCC visibility push(hidden) - which is
-dnl "really only recommended for legacy code".
-dnl Set the variable CFLAG_VISIBILITY.
-dnl Defines and sets the variable HAVE_VISIBILITY.
-
-AC_DEFUN([gl_VISIBILITY],
-[
-  AC_REQUIRE([AC_PROG_CC])
-  CFLAG_VISIBILITY=
-  HAVE_VISIBILITY=0
-  if test -n "$GCC"; then
-    dnl First, check whether -Werror can be added to the command line, or
-    dnl whether it leads to an error because of some other option that the
-    dnl user has put into $CC $CFLAGS $CPPFLAGS.
-    AC_CACHE_CHECK([whether the -Werror option is usable],
-      [gl_cv_cc_vis_werror],
-      [gl_save_CFLAGS="$CFLAGS"
-       CFLAGS="$CFLAGS -Werror"
-       AC_COMPILE_IFELSE(
-         [AC_LANG_PROGRAM([[]], [[]])],
-         [gl_cv_cc_vis_werror=yes],
-         [gl_cv_cc_vis_werror=no])
-       CFLAGS="$gl_save_CFLAGS"
-      ])
-    dnl Now check whether visibility declarations are supported.
-    AC_CACHE_CHECK([for simple visibility declarations],
-      [gl_cv_cc_visibility],
-      [gl_save_CFLAGS="$CFLAGS"
-       CFLAGS="$CFLAGS -fvisibility=hidden"
-       dnl We use the option -Werror and a function dummyfunc, because on some
-       dnl platforms (Cygwin 1.7) the use of -fvisibility triggers a warning
-       dnl "visibility attribute not supported in this configuration; ignored"
-       dnl at the first function definition in every compilation unit, and we
-       dnl don't want to use the option in this case.
-       if test $gl_cv_cc_vis_werror = yes; then
-         CFLAGS="$CFLAGS -Werror"
-       fi
-       AC_COMPILE_IFELSE(
-         [AC_LANG_PROGRAM(
-            [[extern __attribute__((__visibility__("hidden"))) int hiddenvar;
-              extern __attribute__((__visibility__("default"))) int exportedvar;
-              extern __attribute__((__visibility__("hidden"))) int hiddenfunc (void);
-              extern __attribute__((__visibility__("default"))) int exportedfunc (void);
-              void dummyfunc (void);
-              int hiddenvar;
-              int exportedvar;
-              int hiddenfunc (void) { return 51; }
-              int exportedfunc (void) { return 1225736919; }
-              void dummyfunc (void) {}
-            ]],
-            [[]])],
-         [gl_cv_cc_visibility=yes],
-         [gl_cv_cc_visibility=no])
-       CFLAGS="$gl_save_CFLAGS"
-      ])
-    if test $gl_cv_cc_visibility = yes; then
-      CFLAG_VISIBILITY="-fvisibility=hidden"
-      HAVE_VISIBILITY=1
-    fi
-  fi
-  AC_SUBST([CFLAG_VISIBILITY])
-  AC_SUBST([HAVE_VISIBILITY])
-  AC_DEFINE_UNQUOTED([HAVE_VISIBILITY], [$HAVE_VISIBILITY],
-    [Define to 1 or 0, depending whether the compiler supports simple visibility declarations.])
-])

macosx/build.sh

@@ -0,0 +1,113 @@
+#!/bin/sh
+
+###############################################################################
+# Author: Anders F Björklund <afb@users.sourceforge.net>
+#
+# This file has been put into the public domain.
+# You can do whatever you want with this file.
+###############################################################################
+
+mkdir -p Root
+mkdir -p Resources
+
+# Abort immediately if something goes wrong.
+set -e
+
+GCC="gcc-4.2"
+SDK="/Developer/SDKs/MacOSX10.5.sdk"
+MDT="10.5"
+GTT=i686-apple-darwin9
+
+ARCHES1="-arch ppc -arch ppc64 -arch i386 -arch x86_64"
+ARCHES2="-arch ppc -arch i386"
+PKGFORMAT="10.5" # xar
+
+# avoid "unknown required load command: 0x80000022" from linking on Snow Leopard
+uname -r | grep ^1 >/dev/null && LDFLAGS="$LDFLAGS -Wl,-no_compact_linkedit"
+
+# Clean up if it was already configured.
+[ -f Makefile ] && make distclean
+
+# Build the regular fat program
+
+CC="$GCC" \
+CFLAGS="-O2 -g $ARCHES1 -isysroot $SDK -mmacosx-version-min=$MDT" \
+../configure --disable-dependency-tracking --disable-xzdec --disable-lzmadec $GTT
+
+make
+
+make check
+
+make DESTDIR=`pwd`/Root install
+
+make distclean
+
+# Build the size-optimized program
+
+CC="$GCC" \
+CFLAGS="-Os -g $ARCHES2 -isysroot $SDK -mmacosx-version-min=$MDT" \
+../configure --disable-dependency-tracking --disable-shared --disable-nls --disable-encoders --enable-small --disable-threads $GTT
+
+make -C src/liblzma
+make -C src/xzdec
+make -C src/xzdec DESTDIR=`pwd`/Root install
+
+cp -a ../extra Root/usr/local/share/doc/xz
+
+make distclean
+
+# Move development files to different package
+
+test -d liblzma && rm -r liblzma
+mkdir -p liblzma/usr/local
+
+mv Root/usr/local/include liblzma/usr/local
+mv Root/usr/local/lib liblzma/usr/local
+
+mkdir -p Root/usr/local/lib
+cp -p liblzma/usr/local/lib/liblzma.5.dylib Root/usr/local/lib
+mkdir -p liblzma/usr/local/share/doc/xz
+mv Root/usr/local/share/doc/xz/examples* liblzma/usr/local/share/doc/xz
+
+# Strip debugging symbols and make relocatable
+
+for bin in xz lzmainfo xzdec lzmadec; do
+    strip -S Root/usr/local/bin/$bin
+    install_name_tool -change /usr/local/lib/liblzma.5.dylib @executable_path/../lib/liblzma.5.dylib Root/usr/local/bin/$bin
+done
+
+for lib in liblzma.5.dylib; do
+    strip -S Root/usr/local/lib/$lib
+    install_name_tool -id @executable_path/../lib/liblzma.5.dylib Root/usr/local/lib/$lib
+done
+
+# Create tarball, but without the HFS+ attrib
+
+rmdir debug lib po src/liblzma/api src/liblzma src/lzmainfo src/scripts src/xz src/xzdec src tests
+
+( cd Root/usr/local; COPY_EXTENDED_ATTRIBUTES_DISABLE=true COPYFILE_DISABLE=true tar cvjf ../../../XZ.tbz * )
+( cd liblzma; COPY_EXTENDED_ATTRIBUTES_DISABLE=true COPYFILE_DISABLE=true tar cvjf ../liblzma.tbz ./usr/local )
+
+# Include documentation files for package
+
+cp -p ../README Resources/ReadMe.txt
+cp -p ../COPYING Resources/License.txt
+
+# Make an Installer.app package
+
+ID="org.tukaani.xz"
+VERSION=`cd ..; sh build-aux/version.sh`
+PACKAGEMAKER=/Developer/Applications/Utilities/PackageMaker.app/Contents/MacOS/PackageMaker
+$PACKAGEMAKER -r Root/usr/local -l /usr/local -e Resources -i $ID -n $VERSION -t XZ -o XZ.pkg -g $PKGFORMAT --verbose
+$PACKAGEMAKER -r liblzma -w -k -i $ID.liblzma -n $VERSION -o liblzma.pkg -g $PKGFORMAT --verbose
+
+# Put the package in a disk image
+
+if [ "$PKGFORMAT" != "10.5" ]; then
+hdiutil create -fs HFS+ -format UDZO -quiet -srcfolder XZ.pkg -ov XZ.dmg
+hdiutil internet-enable -yes -quiet XZ.dmg
+fi
+
+echo
+echo "Build completed successfully."
+echo

po/LINGUAS

@@ -1,23 +1,5 @@
-ca
 cs
-da
 de
-eo
-es
-fi
 fr
-hr
-hu
 it
-ko
 pl
-pt
-pt_BR
-ro
-sr
-sv
-tr
-uk
-vi
-zh_CN
-zh_TW

po/Makevars

@@ -1,10 +1,4 @@
-# SPDX-License-Identifier: FSFUL
-
 # Makefile variables for PO directory in any package using GNU gettext.
-#
-# Copyright (C) 2003-2019 Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to use, copy, distribute, and modify it.
 
 # Usually the message domain is the same as the package name.
 DOMAIN = $(PACKAGE)
@@ -14,7 +8,7 @@ subdir = po
 top_builddir = ..
 
 # These options get passed to xgettext.
-XGETTEXT_OPTIONS = --keyword=_ --keyword=N_ --no-wrap --package-name='XZ Utils'
+XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
 
 # This is the copyright holder that gets inserted into the header of the
 # $(DOMAIN).pot file.  Set this to the copyright holder of the surrounding
@@ -24,14 +18,7 @@ XGETTEXT_OPTIONS = --keyword=_ --keyword=N_ --no-wrap --package-name='XZ Utils'
 # or entity, or to disclaim their copyright.  The empty string stands for
 # the public domain; in this case the translators are expected to disclaim
 # their copyright.
-COPYRIGHT_HOLDER = The XZ Utils authors and contributors
+COPYRIGHT_HOLDER =
-
-# This tells whether or not to prepend "GNU " prefix to the package
-# name that gets inserted into the header of the $(DOMAIN).pot file.
-# Possible values are "yes", "no", or empty.  If it is empty, try to
-# detect it automatically by scanning the files in $(top_srcdir) for
-# "GNU packagename" string.
-PACKAGE_GNU = no
 
 # This is the email address or URL to which the translators shall report
 # bugs in the untranslated strings:
@@ -53,35 +40,7 @@ MSGID_BUGS_ADDRESS =
 # message catalogs shall be used.  It is usually empty.
 EXTRA_LOCALE_CATEGORIES =
 
-# This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt'
+# Although you may need slightly wider terminal than 80 chars, it is
-# context.  Possible values are "yes" and "no".  Set this to yes if the
+# much nicer to edit the output of --help when this is set.
-# package uses functions taking also a message context, like pgettext(), or
+XGETTEXT_OPTIONS += --no-wrap
-# if in $(XGETTEXT_OPTIONS) you define keywords with a context argument.
+MSGMERGE += --no-wrap
-USE_MSGCTXT = no
-
-# These options get passed to msgmerge.
-# Useful options are in particular:
-#   --previous            to keep previous msgids of translated messages,
-#   --quiet               to reduce the verbosity.
-MSGMERGE_OPTIONS = --no-wrap
-
-# These options get passed to msginit.
-# If you want to disable line wrapping when writing PO files, add
-# --no-wrap to MSGMERGE_OPTIONS, XGETTEXT_OPTIONS, and
-# MSGINIT_OPTIONS.
-#
-# Although one may need slightly wider terminal than 80 chars, it is
-# much nicer to edit the output of --help when --no-wrap is set.
-MSGINIT_OPTIONS = --no-wrap
-
-# This tells whether or not to regenerate a PO file when $(DOMAIN).pot
-# has changed.  Possible values are "yes" and "no".  Set this to no if
-# the POT file is checked in the repository and the version control
-# program ignores timestamps.
-PO_DEPENDS_ON_POT = yes
-
-# This tells whether or not to forcibly update $(DOMAIN).pot and
-# regenerate PO files on "make dist".  Possible values are "yes" and
-# "no".  Set this to no if the POT file and PO files are maintained
-# externally.
-DIST_DEPENDS_ON_UPDATE_PO = yes

po/POTFILES.in

@@ -1,5 +1,3 @@
-# SPDX-License-Identifier: 0BSD
-
 # List of source files which contain translatable strings.
 src/xz/args.c
 src/xz/coder.c
@@ -8,10 +6,8 @@ src/xz/hardware.c
 src/xz/list.c
 src/xz/main.c
 src/xz/message.c
-src/xz/mytime.c
 src/xz/options.c
 src/xz/signals.c
 src/xz/suffix.c
 src/xz/util.c
-src/lzmainfo/lzmainfo.c
 src/common/tuklib_exit.c

po/da.po

@@ -1,896 +0,0 @@
-# Danish translation xz.
-# This file is put in the public domain.
-# Joe Hansen <joedalton2@yahoo.dk>, 2019.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: xz 5.2.4\n"
-"Report-Msgid-Bugs-To: lasse.collin@tukaani.org\n"
-"POT-Creation-Date: 2018-04-29 18:19+0300\n"
-"PO-Revision-Date: 2019-03-04 23:08+0100\n"
-"Last-Translator: Joe Hansen <joedalton2@yahoo.dk>\n"
-"Language-Team: Danish <dansk@dansk-gruppen.dk>\n"
-"Language: da\n"
-"X-Bugs: Report translation errors to the Language-Team address.\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-#: src/xz/args.c:63
-#, c-format
-msgid "%s: Invalid argument to --block-list"
-msgstr "%s: Ugyldigt parameter til --block-list"
-
-#: src/xz/args.c:73
-#, c-format
-msgid "%s: Too many arguments to --block-list"
-msgstr "%s: For mange argumenter til --block-list"
-
-#: src/xz/args.c:102
-msgid "0 can only be used as the last element in --block-list"
-msgstr "0 kan kun bruges som det sidste element i --block-list"
-
-#: src/xz/args.c:406
-#, c-format
-msgid "%s: Unknown file format type"
-msgstr "%s: Ukendt filformattype"
-
-#: src/xz/args.c:429 src/xz/args.c:437
-#, c-format
-msgid "%s: Unsupported integrity check type"
-msgstr "%s: Typen for integritetkontrol er ikke understøttet"
-
-#: src/xz/args.c:473
-msgid "Only one file can be specified with `--files' or `--files0'."
-msgstr "Kun en fil kan angives med »--files« eller »--files0«."
-
-#: src/xz/args.c:541
-#, c-format
-msgid "The environment variable %s contains too many arguments"
-msgstr "Miljøvariablen %s indeholder for mange argumenter"
-
-#: src/xz/args.c:643
-msgid "Compression support was disabled at build time"
-msgstr "Komprimeringsunderstøttelse blev deaktiveret på byggetidspunktet"
-
-#: src/xz/args.c:650
-msgid "Decompression support was disabled at build time"
-msgstr "Dekomprimeringsunderstøttelse blev deaktiveret på byggetidspunktet"
-
-#: src/xz/coder.c:110
-msgid "Maximum number of filters is four"
-msgstr "Maksimalt antal filtre er fire"
-
-#: src/xz/coder.c:129
-msgid "Memory usage limit is too low for the given filter setup."
-msgstr "Begræsningen for brug af hukommelse er for lav for den givne filteropsætning."
-
-#: src/xz/coder.c:159
-msgid "Using a preset in raw mode is discouraged."
-msgstr "Det frarådes at bruge en forhåndskonfiguration i rå tilstand (raw mode)."
-
-#: src/xz/coder.c:161
-msgid "The exact options of the presets may vary between software versions."
-msgstr "De præcise indstillinger for forhåndskonfigurationerne kan variere mellem programversioner."
-
-#: src/xz/coder.c:184
-msgid "The .lzma format supports only the LZMA1 filter"
-msgstr "Formatet .lzma understøtter kun LZMA1-filteret"
-
-#: src/xz/coder.c:192
-msgid "LZMA1 cannot be used with the .xz format"
-msgstr "LZMA1 kan ikke bruges med .xz-formatet"
-
-#: src/xz/coder.c:209
-msgid "The filter chain is incompatible with --flush-timeout"
-msgstr "Filterkæden er ikke kompatibel med --flush-timeout"
-
-#: src/xz/coder.c:215
-msgid "Switching to single-threaded mode due to --flush-timeout"
-msgstr "Skifter til enkelt trådet tilstand på grund af --flush-timeout"
-
-#: src/xz/coder.c:235
-#, c-format
-msgid "Using up to %<PRIu32> threads."
-msgstr "Bruger op til %<PRIu32> tråde."
-
-#: src/xz/coder.c:251
-msgid "Unsupported filter chain or filter options"
-msgstr "Filterkæde eller filterindstillinger er ikke understøttet"
-
-#: src/xz/coder.c:263
-#, c-format
-msgid "Decompression will need %s MiB of memory."
-msgstr "Dekomprimering vil kræve %s MiB hukommelse."
-
-#: src/xz/coder.c:300
-#, c-format
-msgid "Adjusted the number of threads from %s to %s to not exceed the memory usage limit of %s MiB"
-msgstr "Justerede antallet af tråde fra %s til %s for ikke at overskride begræsningen på brug af hukommelse på %s MiB"
-
-#: src/xz/coder.c:354
-#, c-format
-msgid "Adjusted LZMA%c dictionary size from %s MiB to %s MiB to not exceed the memory usage limit of %s MiB"
-msgstr "Justerede LZMA%c-ordbogsstørrelsen fra %s MiB til %s MiB for ikke at overskride begrænsningen på brug af hukommelse på %s MiB"
-
-#: src/xz/file_io.c:110 src/xz/file_io.c:118
-#, c-format
-msgid "Error creating a pipe: %s"
-msgstr "Det opstod en fejl under oprettelse af en datakanal: %s"
-
-#: src/xz/file_io.c:173
-msgid "Sandbox is disabled due to incompatible command line arguments"
-msgstr "Sandkassen er deaktiveret på grund af inkompatible kommandolinjeargumenter"
-
-#: src/xz/file_io.c:216
-msgid "Sandbox was successfully enabled"
-msgstr "Sandkassen blev aktiveret"
-
-#: src/xz/file_io.c:220
-msgid "Failed to enable the sandbox"
-msgstr "Kunne ikke aktivere sandkassen"
-
-#: src/xz/file_io.c:262
-#, c-format
-msgid "%s: poll() failed: %s"
-msgstr "%s: poll() mislykkedes: %s"
-
-#. TRANSLATORS: When compression or decompression finishes,
-#. and xz is going to remove the source file, xz first checks
-#. if the source file still exists, and if it does, does its
-#. device and inode numbers match what xz saw when it opened
-#. the source file. If these checks fail, this message is
-#. shown, %s being the filename, and the file is not deleted.
-#. The check for device and inode numbers is there, because
-#. it is possible that the user has put a new file in place
-#. of the original file, and in that case it obviously
-#. shouldn't be removed.
-#: src/xz/file_io.c:332
-#, c-format
-msgid "%s: File seems to have been moved, not removing"
-msgstr "%s: Filen er vist blevet flyttet, sletter ikke"
-
-#: src/xz/file_io.c:339 src/xz/file_io.c:878
-#, c-format
-msgid "%s: Cannot remove: %s"
-msgstr "%s: Kan ikke fjerne: %s"
-
-#: src/xz/file_io.c:364
-#, c-format
-msgid "%s: Cannot set the file owner: %s"
-msgstr "%s: Kan ikke angive filejeren: %s"
-
-#: src/xz/file_io.c:370
-#, c-format
-msgid "%s: Cannot set the file group: %s"
-msgstr "%s: Kan ikke angive filgruppen: %s"
-
-#: src/xz/file_io.c:389
-#, c-format
-msgid "%s: Cannot set the file permissions: %s"
-msgstr "%s: Kan ikke angive filtilladelser: %s"
-
-#: src/xz/file_io.c:515
-#, c-format
-msgid "Error getting the file status flags from standard input: %s"
-msgstr "Der opstod en fejl under indhentelse af filstatusflag fra standardind: %s"
-
-#: src/xz/file_io.c:572 src/xz/file_io.c:634
-#, c-format
-msgid "%s: Is a symbolic link, skipping"
-msgstr "%s: Er en symbolsk henvisning, udelader"
-
-#: src/xz/file_io.c:663
-#, c-format
-msgid "%s: Is a directory, skipping"
-msgstr "%s: Er en mappe, udelader"
-
-#: src/xz/file_io.c:669
-#, c-format
-msgid "%s: Not a regular file, skipping"
-msgstr "%s: Er ikke en normal fil, udelader"
-
-#: src/xz/file_io.c:686
-#, c-format
-msgid "%s: File has setuid or setgid bit set, skipping"
-msgstr "%s: Filen har setuid- eller setgid-bitsæt, udelader"
-
-#: src/xz/file_io.c:693
-#, c-format
-msgid "%s: File has sticky bit set, skipping"
-msgstr "%s: Fil har klæbende bitsæt, udelader"
-
-#: src/xz/file_io.c:700
-#, c-format
-msgid "%s: Input file has more than one hard link, skipping"
-msgstr "%s: Inddatafil har mere end en hård henvisning, udelader"
-
-#: src/xz/file_io.c:788
-#, c-format
-msgid "Error restoring the status flags to standard input: %s"
-msgstr "Der opstod en fejl under gendannelse af statusflagene til standardind: %s"
-
-#: src/xz/file_io.c:836
-#, c-format
-msgid "Error getting the file status flags from standard output: %s"
-msgstr "Der opstod en fejl under indhentelse af filstatusflag fra standardud: %s"
-
-#: src/xz/file_io.c:1014
-#, c-format
-msgid "Error restoring the O_APPEND flag to standard output: %s"
-msgstr "Der opstod en fejl under gendannelse af flaget O_APPEND til standardud: %s"
-
-#: src/xz/file_io.c:1026
-#, c-format
-msgid "%s: Closing the file failed: %s"
-msgstr "%s: Lukning af filen fejlede: %s"
-
-#: src/xz/file_io.c:1062 src/xz/file_io.c:1288
-#, c-format
-msgid "%s: Seeking failed when trying to create a sparse file: %s"
-msgstr "%s: Søgning fejlede under forsøg på at oprette en tynd fil: %s"
-
-#: src/xz/file_io.c:1157
-#, c-format
-msgid "%s: Read error: %s"
-msgstr "%s: Læsefejl: %s"
-
-#: src/xz/file_io.c:1177
-#, c-format
-msgid "%s: Error seeking the file: %s"
-msgstr "%s: Der opstod en fejl under søgning efter filen: %s"
-
-#: src/xz/file_io.c:1187
-#, c-format
-msgid "%s: Unexpected end of file"
-msgstr "%s: Uventet filafslutning"
-
-#: src/xz/file_io.c:1246
-#, c-format
-msgid "%s: Write error: %s"
-msgstr "%s: Skrivefejl: %s"
-
-#: src/xz/hardware.c:107
-msgid "Disabled"
-msgstr "Deaktiveret"
-
-#. TRANSLATORS: Test with "xz --info-memory" to see if
-#. the alignment looks nice.
-#: src/xz/hardware.c:126
-msgid "Total amount of physical memory (RAM): "
-msgstr "Samlet mængde fysisk hukommelse (RAM):           "
-
-#: src/xz/hardware.c:128
-msgid "Memory usage limit for compression:    "
-msgstr "Grænse for hukommelsesforbrug til komprimering:  "
-
-#: src/xz/hardware.c:130
-msgid "Memory usage limit for decompression:  "
-msgstr "Grænse for hukommelsesforbug til dekomprimering: "
-
-#. TRANSLATORS: Indicates that there is no integrity check.
-#. This string is used in tables, so the width must not
-#. exceed ten columns with a fixed-width font.
-#: src/xz/list.c:65
-msgid "None"
-msgstr "Ingen"
-
-#. TRANSLATORS: Indicates that integrity check name is not known,
-#. but the Check ID is known (here 2). This and other "Unknown-N"
-#. strings are used in tables, so the width must not exceed ten
-#. columns with a fixed-width font. It's OK to omit the dash if
-#. you need space for one extra letter, but don't use spaces.
-#: src/xz/list.c:72
-msgid "Unknown-2"
-msgstr "Ukendt-2"
-
-#: src/xz/list.c:73
-msgid "Unknown-3"
-msgstr "Ukendt-3"
-
-#: src/xz/list.c:75
-msgid "Unknown-5"
-msgstr "Ukendt-5"
-
-#: src/xz/list.c:76
-msgid "Unknown-6"
-msgstr "Ukendt-6"
-
-#: src/xz/list.c:77
-msgid "Unknown-7"
-msgstr "Ukendt-7"
-
-#: src/xz/list.c:78
-msgid "Unknown-8"
-msgstr "Ukendt-8"
-
-#: src/xz/list.c:79
-msgid "Unknown-9"
-msgstr "Ukendt-9"
-
-#: src/xz/list.c:81
-msgid "Unknown-11"
-msgstr "Ukendt-11"
-
-#: src/xz/list.c:82
-msgid "Unknown-12"
-msgstr "Ukendt-12"
-
-#: src/xz/list.c:83
-msgid "Unknown-13"
-msgstr "Ukendt-13"
-
-#: src/xz/list.c:84
-msgid "Unknown-14"
-msgstr "Ukendt-14"
-
-#: src/xz/list.c:85
-msgid "Unknown-15"
-msgstr "Ukendt-15"
-
-#: src/xz/list.c:153
-#, c-format
-msgid "%s: File is empty"
-msgstr "%s: Filen er tom"
-
-#: src/xz/list.c:158
-#, c-format
-msgid "%s: Too small to be a valid .xz file"
-msgstr "%s: For lille til at være en gyldig .xz-fil"
-
-#. TRANSLATORS: These are column headings. From Strms (Streams)
-#. to Ratio, the columns are right aligned. Check and Filename
-#. are left aligned. If you need longer words, it's OK to
-#. use two lines here. Test with "xz -l foo.xz".
-#: src/xz/list.c:677
-msgid "Strms  Blocks   Compressed Uncompressed  Ratio  Check   Filename"
-msgstr ""
-
-#: src/xz/list.c:717
-#, c-format
-msgid "  Streams:            %s\n"
-msgstr "  Strømme:            %s\n"
-
-#: src/xz/list.c:719
-#, c-format
-msgid "  Blocks:             %s\n"
-msgstr "  Blokke:             %s\n"
-
-#: src/xz/list.c:721
-#, c-format
-msgid "  Compressed size:    %s\n"
-msgstr "  Komprimeret str.:   %s\n"
-
-#: src/xz/list.c:724
-#, c-format
-msgid "  Uncompressed size:  %s\n"
-msgstr "  Ukomprimeret str.:  %s\n"
-
-#: src/xz/list.c:727
-#, c-format
-msgid "  Ratio:              %s\n"
-msgstr "  Pakkeforhold:       %s\n"
-
-#: src/xz/list.c:729
-#, c-format
-msgid "  Check:              %s\n"
-msgstr "  Kontrol:            %s\n"
-
-#: src/xz/list.c:730
-#, c-format
-msgid "  Stream padding:     %s\n"
-msgstr "  Strømfyld:          %s\n"
-
-#. TRANSLATORS: The second line is column headings. All except
-#. Check are right aligned; Check is left aligned. Test with
-#. "xz -lv foo.xz".
-#: src/xz/list.c:758
-msgid ""
-"  Streams:\n"
-"    Stream    Blocks      CompOffset    UncompOffset        CompSize      UncompSize  Ratio  Check      Padding"
-msgstr ""
-"  Strømme:\n"
-"     Strøm    Blokke      KompForsk.    DekompForsk.        KompStr.      DekompStr.  Forh.  Kontrol       Fyld"
-
-#. TRANSLATORS: The second line is column headings. All
-#. except Check are right aligned; Check is left aligned.
-#: src/xz/list.c:813
-#, c-format
-msgid ""
-"  Blocks:\n"
-"    Stream     Block      CompOffset    UncompOffset       TotalSize      UncompSize  Ratio  Check"
-msgstr ""
-"  Blokke:\n"
-"     Strøm     Blok       KompForsk.    DekompForsk.        Ialtstr.      DekompStr.  Forh.  Kontrol"
-
-#. TRANSLATORS: These are additional column headings
-#. for the most verbose listing mode. CheckVal
-#. (Check value), Flags, and Filters are left aligned.
-#. Header (Block Header Size), CompSize, and MemUsage
-#. are right aligned. %*s is replaced with 0-120
-#. spaces to make the CheckVal column wide enough.
-#. Test with "xz -lvv foo.xz".
-#: src/xz/list.c:825
-#, c-format
-msgid "      CheckVal %*s Header  Flags        CompSize    MemUsage  Filters"
-msgstr "    KontrolVær %*sTeksth Flag         Kompstr.    HukForb.  Filtre"
-
-#: src/xz/list.c:903 src/xz/list.c:1078
-#, c-format
-msgid "  Memory needed:      %s MiB\n"
-msgstr "  Hukommelse krævet:  %s MiB\n"
-
-#: src/xz/list.c:905 src/xz/list.c:1080
-#, c-format
-msgid "  Sizes in headers:   %s\n"
-msgstr "  Størrelser i teksthoveder: %s\n"
-
-#: src/xz/list.c:906 src/xz/list.c:1081
-msgid "Yes"
-msgstr "Ja"
-
-#: src/xz/list.c:906 src/xz/list.c:1081
-msgid "No"
-msgstr "Nej"
-
-#: src/xz/list.c:907 src/xz/list.c:1082
-#, c-format
-msgid "  Minimum XZ Utils version: %s\n"
-msgstr "  Minimum for XZ Utils-version: %s\n"
-
-#. TRANSLATORS: %s is an integer. Only the plural form of this
-#. message is used (e.g. "2 files"). Test with "xz -l foo.xz bar.xz".
-#: src/xz/list.c:1057
-#, c-format
-msgid "%s file\n"
-msgid_plural "%s files\n"
-msgstr[0] "%s fil\n"
-msgstr[1] "%s filer\n"
-
-#: src/xz/list.c:1070
-msgid "Totals:"
-msgstr "I alt:"
-
-#: src/xz/list.c:1071
-#, c-format
-msgid "  Number of files:    %s\n"
-msgstr "  Antal filer:        %s\n"
-
-#: src/xz/list.c:1146
-msgid "--list works only on .xz files (--format=xz or --format=auto)"
-msgstr ""
-
-#: src/xz/list.c:1152
-msgid "--list does not support reading from standard input"
-msgstr "--list understøtter ikke læsning fra standardind"
-
-#: src/xz/main.c:89
-#, c-format
-msgid "%s: Error reading filenames: %s"
-msgstr "%s: Der opstod en fejl under forsøg på læsning af filnavne: %s"
-
-#: src/xz/main.c:96
-#, c-format
-msgid "%s: Unexpected end of input when reading filenames"
-msgstr "%s: Uventet afslutning på inddata under forsøg på læsning af filnavne"
-
-#: src/xz/main.c:120
-#, c-format
-msgid "%s: Null character found when reading filenames; maybe you meant to use `--files0' instead of `--files'?"
-msgstr ""
-
-#: src/xz/main.c:174
-msgid "Compression and decompression with --robot are not supported yet."
-msgstr "Komprimering og dekomprimering med --robot er endnu ikke understøttet."
-
-#: src/xz/main.c:252
-msgid "Cannot read data from standard input when reading filenames from standard input"
-msgstr ""
-
-#. TRANSLATORS: This is the program name in the beginning
-#. of the line in messages. Usually it becomes "xz: ".
-#. This is a translatable string because French needs
-#. a space before a colon.
-#: src/xz/message.c:714
-#, c-format
-msgid "%s: "
-msgstr "%s: "
-
-#: src/xz/message.c:777 src/xz/message.c:827
-msgid "Internal error (bug)"
-msgstr "Intern fejl (fejl)"
-
-#: src/xz/message.c:784
-msgid "Cannot establish signal handlers"
-msgstr "Kan ikke etbalere signalhåndteringer"
-
-#: src/xz/message.c:793
-msgid "No integrity check; not verifying file integrity"
-msgstr "Ingen integritetkontrol; verificerer ikke filintegritet"
-
-#: src/xz/message.c:796
-msgid "Unsupported type of integrity check; not verifying file integrity"
-msgstr ""
-
-#: src/xz/message.c:803
-msgid "Memory usage limit reached"
-msgstr "Begrænsning på brug af hukommelse er nået"
-
-#: src/xz/message.c:806
-msgid "File format not recognized"
-msgstr "Filformatet blev ikke genkendt"
-
-#: src/xz/message.c:809
-msgid "Unsupported options"
-msgstr "Tilvalg er ikke understøttede"
-
-#: src/xz/message.c:812
-msgid "Compressed data is corrupt"
-msgstr "Komprimerede data er ødelagte"
-
-#: src/xz/message.c:815
-msgid "Unexpected end of input"
-msgstr "Uventet afslutning på inddata"
-
-#: src/xz/message.c:848
-#, c-format
-msgid "%s MiB of memory is required. The limiter is disabled."
-msgstr "%s MiB hukommelse er krævet. Begrænseren er deaktiveret."
-
-#: src/xz/message.c:876
-#, c-format
-msgid "%s MiB of memory is required. The limit is %s."
-msgstr "%s MiB hukommelse er krævet. Begrænsningen er %s."
-
-#: src/xz/message.c:1043
-#, c-format
-msgid "%s: Filter chain: %s\n"
-msgstr "%s: Filterkæde: %s\n"
-
-#: src/xz/message.c:1053
-#, c-format
-msgid "Try `%s --help' for more information."
-msgstr "Prøv »%s --help« for yderligere information."
-
-#: src/xz/message.c:1079
-#, c-format
-msgid ""
-"Usage: %s [OPTION]... [FILE]...\n"
-"Compress or decompress FILEs in the .xz format.\n"
-"\n"
-msgstr ""
-
-#: src/xz/message.c:1086
-msgid "Mandatory arguments to long options are mandatory for short options too.\n"
-msgstr ""
-"Obligatoriske argumenter til lange tilvalg er også obligatoriske for korte\n"
-"tilvalg.\n"
-
-#: src/xz/message.c:1090
-msgid " Operation mode:\n"
-msgstr " Operationstilstand:\n"
-
-#: src/xz/message.c:1093
-msgid ""
-"  -z, --compress      force compression\n"
-"  -d, --decompress    force decompression\n"
-"  -t, --test          test compressed file integrity\n"
-"  -l, --list          list information about .xz files"
-msgstr ""
-
-#: src/xz/message.c:1099
-msgid ""
-"\n"
-" Operation modifiers:\n"
-msgstr ""
-"\n"
-"Operationsændrere:\n"
-
-#: src/xz/message.c:1102
-msgid ""
-"  -k, --keep          keep (don't delete) input files\n"
-"  -f, --force         force overwrite of output file and (de)compress links\n"
-"  -c, --stdout        write to standard output and don't delete input files"
-msgstr ""
-
-#: src/xz/message.c:1108
-msgid ""
-"      --single-stream decompress only the first stream, and silently\n"
-"                      ignore possible remaining input data"
-msgstr ""
-
-#: src/xz/message.c:1111
-msgid ""
-"      --no-sparse     do not create sparse files when decompressing\n"
-"  -S, --suffix=.SUF   use the suffix `.SUF' on compressed files\n"
-"      --files[=FILE]  read filenames to process from FILE; if FILE is\n"
-"                      omitted, filenames are read from the standard input;\n"
-"                      filenames must be terminated with the newline character\n"
-"      --files0[=FILE] like --files but use the null character as terminator"
-msgstr ""
-
-#: src/xz/message.c:1120
-msgid ""
-"\n"
-" Basic file format and compression options:\n"
-msgstr ""
-
-#: src/xz/message.c:1122
-msgid ""
-"  -F, --format=FMT    file format to encode or decode; possible values are\n"
-"                      `auto' (default), `xz', `lzma', and `raw'\n"
-"  -C, --check=CHECK   integrity check type: `none' (use with caution),\n"
-"                      `crc32', `crc64' (default), or `sha256'"
-msgstr ""
-
-#: src/xz/message.c:1127
-msgid "      --ignore-check  don't verify the integrity check when decompressing"
-msgstr ""
-
-#: src/xz/message.c:1131
-msgid ""
-"  -0 ... -9           compression preset; default is 6; take compressor *and*\n"
-"                      decompressor memory usage into account before using 7-9!"
-msgstr ""
-
-#: src/xz/message.c:1135
-msgid ""
-"  -e, --extreme       try to improve compression ratio by using more CPU time;\n"
-"                      does not affect decompressor memory requirements"
-msgstr ""
-
-#: src/xz/message.c:1139
-msgid ""
-"  -T, --threads=NUM   use at most NUM threads; the default is 1; set to 0\n"
-"                      to use as many threads as there are processor cores"
-msgstr ""
-
-#: src/xz/message.c:1144
-msgid ""
-"      --block-size=SIZE\n"
-"                      start a new .xz block after every SIZE bytes of input;\n"
-"                      use this to set the block size for threaded compression"
-msgstr ""
-
-#: src/xz/message.c:1148
-msgid ""
-"      --block-list=SIZES\n"
-"                      start a new .xz block after the given comma-separated\n"
-"                      intervals of uncompressed data"
-msgstr ""
-
-#: src/xz/message.c:1152
-msgid ""
-"      --flush-timeout=TIMEOUT\n"
-"                      when compressing, if more than TIMEOUT milliseconds has\n"
-"                      passed since the previous flush and reading more input\n"
-"                      would block, all pending data is flushed out"
-msgstr ""
-
-#: src/xz/message.c:1158
-#, no-c-format
-msgid ""
-"      --memlimit-compress=LIMIT\n"
-"      --memlimit-decompress=LIMIT\n"
-"  -M, --memlimit=LIMIT\n"
-"                      set memory usage limit for compression, decompression,\n"
-"                      or both; LIMIT is in bytes, % of RAM, or 0 for defaults"
-msgstr ""
-
-#: src/xz/message.c:1165
-msgid ""
-"      --no-adjust     if compression settings exceed the memory usage limit,\n"
-"                      give an error instead of adjusting the settings downwards"
-msgstr ""
-
-#: src/xz/message.c:1171
-msgid ""
-"\n"
-" Custom filter chain for compression (alternative for using presets):"
-msgstr ""
-
-#: src/xz/message.c:1180
-msgid ""
-"\n"
-"  --lzma1[=OPTS]      LZMA1 or LZMA2; OPTS is a comma-separated list of zero or\n"
-"  --lzma2[=OPTS]      more of the following options (valid values; default):\n"
-"                        preset=PRE reset options to a preset (0-9[e])\n"
-"                        dict=NUM   dictionary size (4KiB - 1536MiB; 8MiB)\n"
-"                        lc=NUM     number of literal context bits (0-4; 3)\n"
-"                        lp=NUM     number of literal position bits (0-4; 0)\n"
-"                        pb=NUM     number of position bits (0-4; 2)\n"
-"                        mode=MODE  compression mode (fast, normal; normal)\n"
-"                        nice=NUM   nice length of a match (2-273; 64)\n"
-"                        mf=NAME    match finder (hc3, hc4, bt2, bt3, bt4; bt4)\n"
-"                        depth=NUM  maximum search depth; 0=automatic (default)"
-msgstr ""
-
-#: src/xz/message.c:1195
-msgid ""
-"\n"
-"  --x86[=OPTS]        x86 BCJ filter (32-bit and 64-bit)\n"
-"  --powerpc[=OPTS]    PowerPC BCJ filter (big endian only)\n"
-"  --ia64[=OPTS]       IA-64 (Itanium) BCJ filter\n"
-"  --arm[=OPTS]        ARM BCJ filter (little endian only)\n"
-"  --armthumb[=OPTS]   ARM-Thumb BCJ filter (little endian only)\n"
-"  --sparc[=OPTS]      SPARC BCJ filter\n"
-"                      Valid OPTS for all BCJ filters:\n"
-"                        start=NUM  start offset for conversions (default=0)"
-msgstr ""
-
-#: src/xz/message.c:1207
-msgid ""
-"\n"
-"  --delta[=OPTS]      Delta filter; valid OPTS (valid values; default):\n"
-"                        dist=NUM   distance between bytes being subtracted\n"
-"                                   from each other (1-256; 1)"
-msgstr ""
-
-#: src/xz/message.c:1215
-msgid ""
-"\n"
-" Other options:\n"
-msgstr ""
-"\n"
-"Andre tilvalg:\n"
-
-#: src/xz/message.c:1218
-msgid ""
-"  -q, --quiet         suppress warnings; specify twice to suppress errors too\n"
-"  -v, --verbose       be verbose; specify twice for even more verbose"
-msgstr ""
-
-#: src/xz/message.c:1223
-msgid "  -Q, --no-warn       make warnings not affect the exit status"
-msgstr ""
-
-#: src/xz/message.c:1225
-msgid "      --robot         use machine-parsable messages (useful for scripts)"
-msgstr ""
-"      --robot         brug beskeder der kan fortolkes maskinelt (nyttigt\n"
-"                      for skripter)"
-
-#: src/xz/message.c:1228
-msgid ""
-"      --info-memory   display the total amount of RAM and the currently active\n"
-"                      memory usage limits, and exit"
-msgstr ""
-
-#: src/xz/message.c:1231
-msgid ""
-"  -h, --help          display the short help (lists only the basic options)\n"
-"  -H, --long-help     display this long help and exit"
-msgstr ""
-"  -h, --help          vis den korte hjælpetekst (viser kun grundlæggende\n"
-"                      tilvalg)\n"
-"  -H, --long-help     vis den lange hjælpetekst og afslut"
-
-#: src/xz/message.c:1235
-msgid ""
-"  -h, --help          display this short help and exit\n"
-"  -H, --long-help     display the long help (lists also the advanced options)"
-msgstr ""
-"  -h, --help          vis den korte hjælpetekst og afslut\n"
-"  -H, --long-help     vis den lange hjælpetekst (viser også de avancerede\n"
-"                      tilvalg)"
-
-#: src/xz/message.c:1240
-msgid "  -V, --version       display the version number and exit"
-msgstr "  -V, --version       vis versionsnummer og afslut"
-
-#: src/xz/message.c:1242
-msgid ""
-"\n"
-"With no FILE, or when FILE is -, read standard input.\n"
-msgstr ""
-"\n"
-"Med ingen FIL, eller når FIL er -, læs standardind.\n"
-
-#. TRANSLATORS: This message indicates the bug reporting address
-#. for this package. Please add _another line_ saying
-#. "Report translation bugs to <...>\n" with the email or WWW
-#. address for translation bugs. Thanks.
-#: src/xz/message.c:1248
-#, c-format
-msgid "Report bugs to <%s> (in English or Finnish).\n"
-msgstr ""
-"Rapporter fejl til <%s> (på engelsk eller finsk).\n"
-"Rapporter oversættelsesfejl til <dansk@dansk-gruppen.dk>.\n"
-
-#: src/xz/message.c:1250
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "%s hjemmeside: <%s>\n"
-
-#: src/xz/message.c:1254
-msgid "THIS IS A DEVELOPMENT VERSION NOT INTENDED FOR PRODUCTION USE."
-msgstr "DETTE ER EN UDVIKLINGSVERSION - BRUG IKKE I PRODUKTION."
-
-#: src/xz/options.c:86
-#, c-format
-msgid "%s: Options must be `name=value' pairs separated with commas"
-msgstr "%s: Tilvalg skal være »navne=værdi«-par adskilt med kommaer"
-
-#: src/xz/options.c:93
-#, c-format
-msgid "%s: Invalid option name"
-msgstr "%s: Ugyldigt tilvalgsnavn"
-
-#: src/xz/options.c:113
-#, c-format
-msgid "%s: Invalid option value"
-msgstr "%s: Ugyldigt tilvalgsværdi"
-
-#: src/xz/options.c:247
-#, c-format
-msgid "Unsupported LZMA1/LZMA2 preset: %s"
-msgstr "LZMA1/LZMA2-forhåndskonfiguration er ikke understøttet: %s"
-
-#: src/xz/options.c:355
-msgid "The sum of lc and lp must not exceed 4"
-msgstr "Summen af lc og lp må ikke være højere end 4"
-
-#: src/xz/options.c:359
-#, c-format
-msgid "The selected match finder requires at least nice=%<PRIu32>"
-msgstr "Den valgte matchfinder kræver mindst nice=%<PRIu32>"
-
-#: src/xz/suffix.c:133 src/xz/suffix.c:258
-#, c-format
-msgid "%s: With --format=raw, --suffix=.SUF is required unless writing to stdout"
-msgstr "%s: med --format=raw, --suffix=.SUF er krævet med mindre der skrives til standardud"
-
-#: src/xz/suffix.c:164
-#, c-format
-msgid "%s: Filename has an unknown suffix, skipping"
-msgstr "%s: Filnavn har ukendt endelse, udelader"
-
-#: src/xz/suffix.c:185
-#, c-format
-msgid "%s: File already has `%s' suffix, skipping"
-msgstr "%s: Filen har allrede endelsen »%s«, udelader."
-
-#: src/xz/suffix.c:393
-#, c-format
-msgid "%s: Invalid filename suffix"
-msgstr "%s: Ugyldig filnavnendelse"
-
-#: src/xz/util.c:71
-#, c-format
-msgid "%s: Value is not a non-negative decimal integer"
-msgstr "%s: Værdi er ikke et positivt decimalheltal"
-
-#: src/xz/util.c:113
-#, c-format
-msgid "%s: Invalid multiplier suffix"
-msgstr "%s: Ugyldig multiplikatorendelse"
-
-#: src/xz/util.c:115
-msgid "Valid suffixes are `KiB' (2^10), `MiB' (2^20), and `GiB' (2^30)."
-msgstr "Gyldige endelser er »KiB« (2^10), »MiB« (2^20) og »GiB« (2^30)."
-
-#: src/xz/util.c:132
-#, c-format
-msgid "Value of the option `%s' must be in the range [%<PRIu64>, %<PRIu64>]"
-msgstr "Værdien for tilvalget »%s« skal være i intervallet [%<PRIu64>, %<PRIu64>]"
-
-#: src/xz/util.c:257
-msgid "Empty filename, skipping"
-msgstr "Tomt filnavn, udelader"
-
-#: src/xz/util.c:271
-msgid "Compressed data cannot be read from a terminal"
-msgstr "Komprimerede data kan ikke læses fra en terminal"
-
-#: src/xz/util.c:284
-msgid "Compressed data cannot be written to a terminal"
-msgstr "Komprimerede data kan ikke skrives til en terminal"
-
-#: src/common/tuklib_exit.c:39
-msgid "Writing to standard output failed"
-msgstr "Skrivning til standardud mislykkedes"
-
-#: src/common/tuklib_exit.c:42
-msgid "Unknown error"
-msgstr "Ukendt fejl"