cb41bdfa9a
(uxn.c) Removed PUSH/PUSH2 macros
2023-07-23 10:13:16 -07:00
bf1ee0298d
(uxn.c) Fixed issue where JSRr was pushing to wrong stack
2023-07-23 09:57:32 -07:00
db6f7d9fbf
(uxn.c) Aligned BRK/JCI/JMI
2023-07-23 09:52:20 -07:00
bc4ec9ea5f
(uxn.c) JSI makes use of SET() macro
2023-07-23 09:41:11 -07:00
6f15a96d91
(uxn.c) LIT opcodes use SET() macro
2023-07-23 09:36:18 -07:00
b020732d6d
(uxn.c) PUT2 should use POKE2 macro
2023-07-23 09:21:09 -07:00
41a3a6b358
(uxn) Removed z stack assignment
2023-07-22 20:53:23 -07:00
92e06e2eda
Removed window padding
2023-07-22 19:52:17 -07:00
0c9e67b9be
uxncli: stop on EOF as there is nothing left to run (besides endless loop)
2023-07-17 00:52:52 +02:00
51d43a6989
screen: don't leak memory and don't crash if failed to adjust for new screen size
2023-07-17 00:50:19 +02:00
dbcb8ed050
retry_realpath: check before possibly writing out of bounds
2023-07-10 17:21:36 +00:00
784467564c
uxnemu: fix two warnings on 9front build
2023-07-10 15:37:42 +00:00
05356e23b1
capture_screen: check for errors
2023-07-10 15:35:35 +00:00
ff6d9e39ca
(uxnemu) Fixes issue where non-zero console/type occurs even when empty, fixed by hikari_no_yume
2023-06-29 14:23:16 -07:00
f5c816d215
(screen.c) Fix sprite draw at screen edge
...
Problem - Sprites can be drawn at X/Y coordinates >= 0xfff9 to appear
partially over the left/upper screen boundary. But the dirty-rectangle
calculation doesn't account for this, so these updates will only appear
on the screen if something *else* dirties this area of the screen. This
can be observed in /projects/examples/devices/screen.tal where these
edges of the screen show stale content.
Solution - Detect wrapping and expand the dirty rectangle appropriately.
Change screen_change to take Uint16 to make sure values are truncated to
the intended range. Ignore changes that are fully off the screen.
2023-06-29 07:41:42 -07:00
e930804c4b
Do not print message on quit
2023-06-09 09:29:25 -07:00
fe10cfecef
Improved usage standard message
2023-06-08 09:47:18 -07:00
5dd7fec729
Removed clear between redraws and moved to set_window_size
2023-06-07 08:23:42 -07:00
e147b46b55
Snake_cased some SDL variables
2023-06-07 08:03:28 -07:00
1d4ae74e41
Removed multiplication from SET macro in uxn core
2023-05-17 20:39:03 -07:00
305b8469b0
Use the correct definition to obtain snprintf(3)
...
At some point snprintf(3) prototype became guarded off in stdio.h.
Defining _C99_SOURCE makes it visible.
On legacy Darwin, such a guard was not present so the definition
has no impact on the build, but on "modern" macos it has the desired
effect.
Build tested on OS X 10.4 and macos 10.15.
2023-05-15 08:32:48 -07:00
b5b3177c68
Switch to using SDL_CreateRGBSurface() SDL_CreateRGBSurfaceWithFormat() was introduced in SDL 2.0.5 whereas SDL_CreateRGBSurface() is available since SDL 2.0. This allows uxn to run on legacy systems where it's not possible to reach SDL 2.0.5 but prior versions are, such as Mac OS X Tiger.
2023-05-14 19:34:55 -07:00
822a7fea54
Use the audio format native to host AUDIO_S16 defaults to little endian format which causes issues when running on big endian systems. Use AUDIO_S16SYS instead which sets to whatever endian the system uxn is being built on is.
2023-05-14 19:34:55 -07:00
~d6
310ba97ef6
Improve screen vector timing somewhat.
...
This patch tries to improve the accuracy of our
screen refresh timing. Notably, it tries to ensure
we don't introduce extra delay in our timing based
on how long the screen vector takes to evaluate.
We also try to ensure we only call SDL_Delay when
we have at least 1ms to wait.
2023-05-09 13:12:23 -07:00
09d9990a62
(screen) Fixes warnings
2023-05-04 20:45:52 -07:00
77edd1dbbf
(screen) Renamed pixels attr to layer
2023-05-04 20:32:44 -07:00
d80885ee22
(screen) Housekeeping
2023-05-04 20:17:38 -07:00
98bd2a7849
(screen) Use uxn_screen global
2023-05-04 17:43:44 -07:00
9416a0e813
Removed layer struct
2023-05-04 11:33:31 -07:00
8f98281d89
(screen) Only repaint changed pixels
2023-05-04 11:15:16 -07:00
c7f3014fe9
zoom: ignore if 0, ie if the screen is somehow TOO small to do any scaling
2023-05-02 22:53:07 +00:00
83ba7e05ea
Added mock behavior for the friend port
2023-05-02 10:31:33 -07:00
d2e054346f
Declare snprintf to fix builds on macOS
...
For some reason on macOS, the functions `snprintf` and `vsnprintf` are
not in the X/Open 5 (ANSI C89) standard but rather in the X/Open
6 (ISO C99). A simplest solution seems to be to declaring the missing
functions before using them, which is what I did here. Another option
is to use the C99 standard with `#define _XOPEN_SOURCE 600`, which
seems to be an overkill for such a niche issue.
Quoting from the STANDARDS section in `man 3 snprintf` on macOS:
> ...the snprintf() and vsnprintf() functions conform to ISO/IEC
> 9899:1999 (“ISO C99”)...
2023-05-01 09:27:49 -07:00
ce0cc5a352
Do not center on resize
2023-04-26 12:04:44 -07:00
0da70d6bd1
Allow tiny sizes for the screen
2023-04-26 12:01:45 -07:00
ebf31ecb03
(uxnemu) Removed debug line
2023-04-22 14:57:26 -07:00
40d6c889bc
Set Console/type after memory is initialized
2023-04-22 14:56:12 -07:00
3038d5c40b
(console) Use 0x00 for no-queue
2023-04-17 11:27:54 -07:00
d8bee29626
(console) Use 0x1 for no-args
2023-04-17 11:19:37 -07:00
98282cb1a6
Moved error printing to system.c
2023-04-17 11:03:11 -07:00
9a882a64c7
(uxnemu) Write arguments end in console device
2023-04-17 10:41:03 -07:00
1bf0ffc5e5
(uxnemu) Display usage when no roms and no params
2023-04-17 10:29:39 -07:00
453f491918
(uxnemu) Display new zoom values in usage
2023-04-17 09:59:00 -07:00
72e23f0260
(uxnemu) Simplified boot sequence
2023-04-17 09:48:27 -07:00
d1dc143912
(uxnemu) Only set zoom scale once on boot
2023-04-17 09:36:55 -07:00
a9527fbd95
(console.tal) Added input type port to example
2023-04-16 22:03:44 -07:00
fbba9b304d
(console) Implemented 0x17 port with stream type based on design by zzo38
2023-04-16 21:13:50 -07:00
32fa0f95c3
(uxn.c) Catch div-by-zero errors
2023-04-15 09:52:08 -07:00
25cc4a1329
(screen.tal) Improved screen testing rom
2023-04-14 19:51:05 -07:00
c7203de2ea
(uxn.c) Less indirections in uxn core
2023-04-14 10:30:08 -07:00
99874908e4
(screen.c) Skip blit when color is 0
2023-04-14 10:19:57 -07:00
0f75b123a4
(screen) sprite address wrapping
2023-04-14 10:05:15 -07:00
04554dd1d3
(screen.c) Reduced number of variables indirections
2023-04-14 09:51:50 -07:00
b6e6839d25
(screen.c) Removed pixel function
2023-04-13 21:57:17 -07:00
d0db4f9223
(screen.c) Improved readability of the code
2023-04-13 21:33:16 -07:00
891204610a
Fixed issue with screen/fill layer
2023-04-13 09:58:09 -07:00
2acc7edb6f
Added comment for blending LUT
2023-04-13 09:53:05 -07:00
d043ce633d
(screen.c) Faster drawing of pixel
2023-04-13 09:42:59 -07:00
a44dbd9696
(screen.c) Merge all checks
2023-04-12 20:00:17 -07:00
8aae16a9d0
(screen) Removed clamp function
2023-04-12 19:20:11 -07:00
540847694e
Removed screen_wipe
2023-04-12 14:35:48 -07:00
be138f5952
Removed FIXED_SIZE flag
2023-04-12 12:22:17 -07:00
11e9b635c8
Removed mono mode to screen
2023-04-12 11:58:32 -07:00
847b3f2b56
uxnemu: Add dpad support
...
More info about joyhats in SDL2:
https://wiki.libsdl.org/SDL2/SDL_JoyHatEvent
2023-04-12 11:08:48 -07:00
344c5c9904
Added flip-x/flip-y to pixel fill mode
2023-04-11 11:31:36 -07:00
07e8306616
(screen) Created static fill function
2023-04-11 11:11:12 -07:00
24dbc7d5f8
(screen) Rename screen_clear to screen_fill
2023-04-11 10:42:32 -07:00
daa421c259
(uxn.c) Cache stack pointer
2023-04-11 10:32:23 -07:00
fc8400dcac
(uxn.c) Formatting
2023-04-11 10:24:54 -07:00
3973bc2ab8
Made the uxn stacks private again
2023-04-11 10:14:29 -07:00
6f55ed496c
(uxncli) Fixed issue with DateTime device mask
2023-04-08 08:53:56 -07:00
eaf7d095ec
(system.c) The debug port will always print the stacks, even if empty
2023-04-06 17:50:03 -07:00
00ed056e51
(uxnasm) Added support for label sized pads
2023-04-04 20:02:33 -07:00
3b10969f9e
Fixed issue where a screen redraw might occur after it has been unset
2023-04-02 20:27:15 -07:00
8b43d0d7ae
Removed redundant pixel param from screen routines
2023-03-27 08:38:54 -07:00
8a3c86a879
core: in plan 9 C it does not wrap around, fix the crash
2023-03-20 16:29:46 +00:00
37afbc25fb
file: sprintf → snprintf
2023-03-20 16:58:45 +01:00
562153d09e
fix a few long-standing compilation warnings
2023-03-20 16:58:09 +01:00
e386c3aeaa
Fixed issue with Windows builds
2023-03-19 14:12:14 -07:00
05fd9771ca
A more elegant solution to the Windows bugs in filepaths and MinGW compilation
2023-03-19 14:11:42 -07:00
7d66d81e63
Fixed issue with datetime mask
2023-03-17 21:45:03 -07:00
4f9b375895
Fixed issue with device deo mask in uxnemu
2023-03-14 12:40:31 -07:00
c701b95541
Detect stack overflows with greater than 255 bytes.
2023-03-13 06:04:33 +00:00
4464b1ec56
Correct SET values for NIP.
2023-03-13 06:03:44 +00:00
b68af3d173
Replaced macros in PUT2/PUSH2
2023-03-12 18:29:08 -07:00
1de2cea576
Ordered the SWP writes
2023-03-12 16:15:27 -07:00
3ecbfe5e03
Make use of macros in PUT/PUSH
2023-03-12 15:54:20 -07:00
4e77d3d5ae
Renamed PEEK16/POKE16 to PEEK2/POKE2
2023-03-12 15:25:52 -07:00
43ce262a07
Moved opcodes side-by-side
2023-03-12 15:16:10 -07:00
6c068b7774
Removed device page from addressable memory
2023-03-12 14:56:44 -07:00
bdd071cab4
Archived old core
2023-03-12 14:49:58 -07:00
13ab0e5d95
Temporarily override uxn.c with fast until I can port the devices macros
2023-03-11 23:00:32 -08:00
8420c81d52
system.h: no need to redefine the same macro
2023-03-12 02:39:20 +01:00
75af0e3cad
Removed redundant mask in SFT opcode
2023-03-08 09:25:55 -08:00
c4856aabf0
Added missing ports in device mask
2023-03-07 19:48:24 -08:00
77c8e82419
Moved dei/deo masks into emulators
2023-03-06 10:36:24 -08:00
76be67efa0
(uxn-fast.c) Housekeeping
2023-03-06 08:40:00 -08:00
d08efece3d
(uxn-fast.c) Removed redundant macro
2023-03-06 08:31:08 -08:00
2c20d282a8
(uxn-fast) Standardized STH opcodes
2023-03-05 11:35:53 -08:00
9f4231c59a
(uxn-fast) Housekeeping
2023-03-05 11:33:33 -08:00
3da461e14d
(uxn-fast) Housekeeping
2023-03-05 11:31:37 -08:00
211c4afa2d
(uxn-fast) Use macros for STH
2023-03-05 11:29:58 -08:00
8ae1c191d7
(uxn-fast.c) Removed function pointers, instead use exterm
2023-03-05 10:44:23 -08:00
3190cf3238
Catch overflow in lit opcodes
2023-03-05 10:02:26 -08:00
268ec45780
(Screen) Use fast timer if vector short is set
2023-03-04 11:07:11 -08:00
3457f665a7
Use device masks for DEI
2023-03-04 10:51:23 -08:00
aeceaf75bf
Removed file dei event
2023-03-03 21:04:26 -08:00
9ac7f06fde
(uxn-fast) Housekeeping
2023-03-03 20:47:20 -08:00
4cacc0d26b
Removed unused deo param
2023-03-03 20:37:43 -08:00
8f979ec0fe
Use uxn-fast in bug until the callback masks are ported
2023-03-03 12:02:42 -08:00
32539d02a9
Added file device mask
2023-03-03 11:16:24 -08:00
6eac5226e1
(bunnymark) Ported to immediate opcodes
2023-03-03 11:03:38 -08:00
895bfc8675
(mandelbrot.tal) Migrated to immediate opcodes
2023-03-02 20:45:19 -08:00
617e3d1f41
(uxn-fast) Added overflow error
2023-03-02 19:47:24 -08:00
61393d0d83
(uxn-fast) First draft
2023-03-02 16:37:14 -08:00
8c4b1b0592
Use switch for console_deo
2023-03-01 12:04:05 -08:00
ea0d81a9b1
(uxnasm) Fixed refs limit check
2023-03-01 11:46:44 -08:00
96a19b4887
Merge branch 'main' of git.sr.ht:~rabbits/uxn
2023-03-01 11:31:10 -08:00
dae025af20
Date and Screen devices DEI do no need device ptr
2023-03-01 11:28:14 -08:00
075747f2bd
Address compiler warning about switch case falling through.
2023-03-01 19:24:18 +00:00
d12b948e82
Remove unitialised memory.
2023-03-01 19:23:13 +00:00
abd7ab403e
Removed POKDEV
2023-03-01 10:53:44 -08:00
486a60b1bd
Removed PEKDEV macro
2023-03-01 10:49:25 -08:00
53f3c18dcf
Removed GETVEC macro
2023-03-01 10:42:03 -08:00
87de244d37
Replaced some macros
2023-03-01 10:35:42 -08:00
18de47cc1c
Fixed issue with out-of-screen painting
2023-02-28 21:54:52 -08:00
85df5f2d36
(uxnasm) Fixed issue with makeref()
2023-02-28 21:47:45 -08:00
bd01e71c35
Sprite wipe helper
2023-02-28 20:54:32 -08:00
5709511c7e
(screen.c) Do not shift a zero in 1bpp
2023-02-28 19:34:13 -08:00
3818720eb2
Removed opacity lut
2023-02-28 17:00:21 -08:00
91386f4832
(uxn.c) Housekeeping
2023-02-26 14:28:50 -08:00
254f0031e5
(uxn.c) Housekeeping
2023-02-26 13:07:48 -08:00
c6110a50d5
Removed param in PUSH() macro
2023-02-26 09:55:39 -08:00
f07775a9a2
(file device) Fix buffer overflow.
2023-02-17 21:39:14 +00:00
60080d8fe8
(file device)Add / suffix to folder names
2023-02-17 10:08:00 -08:00
~d6
c61be654d6
Pass through more keysyms when control is pressed.
2023-02-14 18:33:51 -08:00
1014229b8c
(uxncli)Use System/halt as exit code
2023-02-13 09:33:57 -08:00
c11dcc3771
remove nonsense return 0
2023-02-07 12:08:17 +00:00
9f4e85b1b3
Named arguments in system_cmd
2023-02-02 10:40:47 -08:00
36a70ed605
Protect system_cmd from reading out of bounds
2023-02-02 10:20:19 -08:00
33d6ef8cd2
Reversed arguments in system loader
2023-02-02 09:35:05 -08:00
0dcc3b4c2e
Simplified system_cmd
2023-01-31 09:49:32 -08:00
e20b572c20
Moved all system memory functions into system.c
2023-01-31 09:38:06 -08:00
5538e539d2
Minor optimisation.
2023-01-31 17:11:54 +00:00
9d9d094e6a
Bare minimum changes to get Windows builds running again.
2023-01-31 17:05:01 +00:00
0aa4aeff41
Load rom in chunks of 64kb
2023-01-28 18:38:37 -08:00
390ae8138a
Extend loaded rom size
2023-01-28 15:05:24 -08:00
fd84ff44d7
Initial draft for MMU
2023-01-28 14:45:31 -08:00
22797644b5
Returned to simpler run function
2023-01-28 10:54:54 -08:00
b894ba4c57
Fixed issue with screen vector run
2023-01-27 09:36:04 -08:00
63108c178a
Tighter run
2023-01-26 10:56:14 -08:00
b5fa665cdb
Reduce refresh requests without screen vector
2023-01-26 09:35:56 -08:00
e327373950
Increased refs limit
2023-01-21 18:24:11 -08:00
cfeeb85712
Catch invalid sublabels
2023-01-14 15:08:40 -08:00
ffb0a9c9bc
(uxnasm.c) Auto-start at 0x100
2023-01-13 10:14:20 -08:00
fad574816d
Removed errcode from stacks
2023-01-12 20:35:42 -08:00
bc26d9d60d
(uxn.c) Removed mask to LDR and write in Uint16 var instead
2023-01-12 19:00:54 -08:00
c7d574b230
(uxn.c) Unallow LDR/STR to reach outside of ram
2023-01-12 18:47:19 -08:00
a5442ea4fd
(uxn.c) Swapped JMI/JCI
2023-01-12 09:44:27 -08:00
5e1c896554
(uxnasm) endian-agnostic handling of symbols file writing
2023-01-12 08:40:33 -08:00
f202944566
Make JMI, JCI and JSI relative.
2023-01-12 13:22:21 +00:00
7490666878
(uxnasm) Simplify handling of references.
2023-01-12 13:15:07 +00:00
230e8dda34
Optimize opcode 0 handling.
2023-01-12 13:02:04 +00:00
e0c2da0700
(uxnasm) Use correct address in symbol export
2023-01-11 21:01:56 -08:00
d5d6a7a186
Removed DEO masks, already fed to Uint8 expecting function
2023-01-09 15:54:05 -08:00
a1bc00ce5f
(uxnasm) Fixed buffer overflow in tokenizer
2023-01-07 11:59:00 -08:00
4e68dc7753
Fixed crash vector where STR/LDR can access outside of bounds
2023-01-07 11:31:03 -08:00
6cbe51b4ab
(uxn.c)Use same macro format sequence for all CALL opcodes
2023-01-03 11:17:55 -08:00
9b8cd748ad
Faster CALL opcodes
2023-01-03 10:48:17 -08:00
0e7137e016
(uxnasm) Experimental implementation of JM/JC/JS runes
2023-01-02 17:45:06 -08:00
5b6aad6be2
Clearer routing of LIT/CALL opcodes
2023-01-02 13:11:52 -08:00
cc2b2e77b0
Merge branch 'main' of git.sr.ht:~rabbits/uxn
2023-01-02 09:50:57 -08:00
491e4b7435
Returned the k variable in uxn core
2023-01-02 09:50:09 -08:00
5cacb3f241
Fix macOS build.
2023-01-02 15:23:28 +00:00
d94a84bc93
Port Audio to new devices scheme.
2023-01-02 15:01:55 +00:00
c2b0667496
Update Copyright years.
2023-01-02 14:40:23 +00:00
a450959e9f
Removed extraneous j variable
2023-01-01 18:26:28 -08:00
6d0b51fa7f
Added support for CALL
2023-01-01 18:03:36 -08:00
22cbd38fab
Do not check twice for short mode in LIT opcode
2023-01-01 16:44:18 -08:00
48596a6ee7
Removed PEEK16 macro
2023-01-01 16:22:37 -08:00
7f275772ef
Added HALT macro
2023-01-01 16:21:05 -08:00
5ac6ff4313
All devices but audio ported to new devices scheme
2023-01-01 16:13:34 -08:00
2fb5f560a7
Use the File device load_rom function
2023-01-01 14:18:27 -08:00
794ce1bdfd
Housekeeping
2023-01-01 13:40:58 -08:00
bf4ee03d27
Ported screen to new device
2023-01-01 13:34:20 -08:00
7afe1f39c7
Screen device is half ported to new device handlers
2023-01-01 13:19:40 -08:00
679aec047a
Device memory is not a member of ram
2023-01-01 12:21:30 -08:00
68d706be25
Will connect devices to devold while I migrate to new router
2023-01-01 12:12:59 -08:00
0fd68e96f0
Connecting new device ports to uxn core
2023-01-01 12:04:54 -08:00
d1ca328b98
Removed devmouse and devctrl globals
2023-01-01 11:47:52 -08:00
9aefeebf25
Removed Device struct from controller device
2023-01-01 11:37:34 -08:00
062bbac37d
Removed Device struct from mouse device
2023-01-01 11:31:14 -08:00
6317b5cf18
fix uxnasm: missing semicolon
2022-12-11 04:54:58 +01:00
c97aa87faf
(uxnasm)Allow more space for symbols filename, and check for length
2022-12-10 11:07:45 -08:00
2f3954d398
Uxnasm should use BE to store addresses
2022-12-09 12:52:34 -08:00
d4c55e2f48
Uxnasm now outputs a symbols file
2022-12-09 12:30:04 -08:00
c8fc397054
Relaunch boot rom if launcher is not found
2022-11-11 21:12:30 -08:00
f59b214ac1
Added _rune
2022-11-10 20:54:53 -08:00
da5e581442
(uxnasm) Fixed issue with = rune
2022-11-09 16:40:07 -08:00
261b574671
(uxnasm) Added support for = and - runes
2022-11-09 16:21:07 -08:00
Devine Lu Linvega
~d6